Search Results for: wall+mount

How do I wall-mount my NETGEAR access point? - NETGEAR Support

At the bottom of your NETGEAR access point there are wall-mounting holes. The distance between the holes is 4.125 in. (105 mm), center-to-center. It is recommend that you use M3 type screws, with a length of 0.75 inch (U.S.) or 20 mm (European). To wall-mount your NETGEAR access point: As an option, create a template: Place a piece of white paper on the bottom of the access point, covering the wall-mounting holes. Use a pencil to gently scratch around the mounting hole areas. Tape the paper onto...

How do I wall mount my NETGEAR router? - NETGEAR Support

Most NETGEAR routers include wall anchor slots on the bottom of the router so that you can mount the router on a wall. This article describes how to wall mount a typical NETGEAR router. Choose a location A clear line of sight from your router to your devices provides the best WiFi signal. The signal strength decreases as it passes through walls and other objects; some objects, like metal cabinets, might block the signal entirely. Consider this as you experiment with different locations and orien...

How do I set up an Orbi Wall Mount Kit for my Orbi device without mounting holes? - NETGEAR Support

Most WiFi 6E and earlier generation Orbi WiFi systems work with the Orbi Wall Mount Kit (RBKWM), which means it needs to be configured slightly differently depending on the Orbi device. The configuration your device requires depends on if it has two mounting holes on the bottom as shown below: The following instructions show you how to set up an Orbi Wall Mount Kit for your Orbi device without mounting holes. If your Orbi device has two mounting holes on the bottom, see How do I set up an Orbi W...

How do I set up an Orbi Wall Mount Kit for my Orbi device with mounting holes? - NETGEAR Support

Most WiFi 6E and earlier generation Orbi WiFi systems work with the Orbi Wall Mount Kit (RBKWM), which means it needs to be configured slightly differently depending on the Orbi device. The configuration your device requires depends on if it has two mounting holes on the bottom as shown below: The following instructions show you how to set up an Orbi Wall Mount Kit for your Orbi device with mounting holes. If your Orbi device does not have any mounting holes on the bottom, see How do I set up an...

How do I set up an Orbi Wall Mount Kit for my Orbi WiFi System? - NETGEAR Support

Most WiFi 6E and earlier generation Orbi WiFi systems work with the Orbi Wall Mount Kit (RBKWM), which means it needs to be configured slightly differently depending on the Orbi device. The configuration your device requires depends on if it has two mounting holes on the bottom: With mounting holes: If your Orbi device has two mounting holes on the bottom, see How do I set up an Orbi Wall Mount Kit for my Orbi device with mounting holes?. Without mounting holes If your Orbi device does not have ...

Which Orbi WiFi systems work with the Orbi Wall Mount Kit? - NETGEAR Support

Most WiFi 6E and earlier generation Orbi WiFi systems work with the Orbi Wall Mount Kit (RBKWM). However, the following Orbi WiFi devices do not work with the RBKWM wall mount kit: RBR10 router, RBS10 satellite RBS40V voice smart speaker satellite SRR60 router, SRS60 satellite SRC60 ceiling satellite RBS50Y outdoor satellite For more information about the products in your Orbi WiFi system, see Which NETGEAR products are in my Orbi or Nighthawk Mesh system?. For instructions about how to set up y...

How do I mount my Orbi Pro devices using the wall mount? - NETGEAR Support

To mount your Orbi Pro devices using the wall mount: Place your Orbi router or satellite on the mount base and attach the router or satellite to the base with the provided screws. Attach the mount cover to the mount base. Use the wall anchors with screws to attach the wall bracket to the wall. Slide the mount base onto the wall bracket. Your Orbi Pro devices are mounted. Last Updated:07/07/2025 | Article ID: 000045856 Was this article helpful? Yes No

GS316 FAQs - NETGEAR Support

What are key features on the GS316? 16 copper 10/100/1000Mbps RJ-45 Ethernet ports LEDs for Power/Port Speed/Link and Activity Auto MDI/MDI-X (Autosense) 3x Flow Control 1p QoS IEEE 802.3az Energy Efficient Ethernet (EEE) compliance Wall mountable Operating temperature: 0° to 40° C (32° to 104° F) What is IEEE 802.3az Energy Efficient Ethernet (EEE) compliance? 802.3az is an IEEE (Institute of Electrical and Electronics Engineers) standard, which allows for less power consumption during periods ...

GS324 FAQs - NETGEAR Support

What are key features on the GS324? 24 copper 10/100/1000Mbps RJ-45 Ethernet ports LEDs for Power/Port Speed/Link and Activity Auto MDI/MDI-X (Autosense) 3x Flow Control 1p QoS and DSCP IEEE 802.3az Energy Efficient Ethernet (EEE) compliance Rack mountable Wall mountable Operating temperature: 0° to 40° C (32° to 104° F) What is IEEE 802.3az Energy Efficient Ethernet (EEE) compliance? 802.3az is an IEEE (Institute of Electrical and Electronics Engineers) standard, which allows for less power con...

How do I install the Swivel Mount for my Meural Canvas? - NETGEAR Support

To install your Swivel Mount, use the following instructions: Step 1. Secure the donut a. Place the donut against the backplate of your Canvas. b. Use a Phillips head screwdriver to screw the four screws into the donut, securing it tightly. Step 2. Install the wall mount extension a. Hold the wall mount extension up to the wall, using the liquid level to adjust. (We recommend 60" from the ground to the center of the mount—the gallery standard.) Then, mark the holes with a pencil. b. Remove the w...

How do I request a Return Material Authorization (RMA) for my NETGEAR product? - NETGEAR Support

If you are experiencing problems with your NETGEAR product, you can contact NETGEAR support so that an expert can troubleshoot your problems and issue a Return Material Authorization (RMA) if it is defective. Do not ship your product to NETGEAR before contacting Support and obtaining authorization to return it. For more information about NETGEAR’s warranty policy, visit the NETGEAR Warranty T&C page. Before requesting an RMA, you must register your NETGEAR product. For more information, see How ...

How to use failover mode on your NETGEAR mobile hotspot with an MD200 MHS cradle - NETGEAR Support

For environments where reliable Internet access is critical, you can set up your NETGEAR mobile hotspot (MHS) with an MD200 MHS cradle to transition a primary fixed Internet connection (such as a home cable or business fiber Internet connection) to the hotspot’s secondary 5G broadband connection in case of downtime or instability in the primary connection (also known as WAN to WWAN passthrough). If downtime or instability in the primary connection occurs: With a cradle: The Internet connection c...

How can I hide the power cable for my Meural Canvas? - NETGEAR Support

How can I hide the power cable for my Meural Canvas?The Meural Canvas is an elegant way to display your art and photos. Some users like to enhance that elegance by hiding the power cable from view. Beyond simply positioning your Canvas's power cable behind plants or furniture, you can also try these methods to hide your Canvas's power cable.Use a cable racewayA cable raceway is a plastic sheath used to route wires along walls.Tips:Clean the surface of your wall before adhering the cable raceway ...

What comes in the box with my Orbi Pro? - NETGEAR Support

Your Orbi Pro comes with the following items: Orbi Pro router (Model SRR60) Orbi Pro satellite (Model SRS60) Power adapte (2) adapter varies by region Ethernet cable Rubber feet (2 sets) Mount bases (2) Mount covers (2) Mount base screws (2 sets) Wall brackets (2) Wall anchors with screws (4) T-bracket with screw (2) T-bracket screws (2 sets) Ceiling bracket (2) Last Updated:07/07/2025 | Article ID: 000045859 Was this article helpful? Yes No

GSS108E / GSS116E Product FAQs - NETGEAR Support

What are GSS108E and GS116E? They are ProSAFE 8-port and 16-port Gigabit Click Switches. , offering the same software features as Plus Switches. What is the key difference between NETGEAR Click Switch and NETGEAR Plus Switch? Click switch offers the innovative 1-2-3-4 mounting system which gives you the flexibility to place the Click Switch in locations where other switches will not go. Whether it's directly on a wall, strapped to a pole, under the meeting table in a conference room or in a serv...

Which NETGEAR switch is right for me? - NETGEAR Support

NETGEAR offers several kinds of switches to suit a wide variety of needs: Unmanaged. Unmanaged switches are easy to set up and offer simple connectivity with no need for management—perfect for a home office. Just pick the speed and number of ports that you want, plug it in, and connect your devices. Unmanaged switches are available in speeds of Fast (100Mbps) or Gigabit Ethernet. Three models also support Power over Ethernet (PoE). To view NETGEAR’s line of Unmanaged Switches, visit http://www.n...

Installing NETGEAR External Wireless Antennae - NETGEAR Support

This article discusses installation of NETGEAR External Wireless Antennae. "N" band is not covered here, just 2.4Gig or "G" band. Overview: NETGEAR wireless routers and access points are supplied with short antennas that attach directly to the wireless device and work well in most installations. They are typically used indoors and provide coverage within approx a 30m-70m range, depending on the number of walls, construction materials etc. However, there are some circumstances when better range i...

ReadyNAS OS 6.4: Unable to mount btrfs USB - NETGEAR Support

Not what you're looking for? Return to the 6.4.1 FAQ NETGEAR is aware of an issue when trying to use btrfs-formatted USB devices on ReadyNAS OS 6.4. You may run into an issue if you meet all of the conditions: Have a USB device that is formatted with btrfs After inserting the USB device into the ReadyNAS, it will not automatically mount the device. You are using ReadyNAS OS 6.4.0 or OS 6.4.1. Users who are using btrfs-formatted USBs will not be able to automatically mount their USB into the Read...

ReadyNAS OS Version 6.4.0 - NETGEAR Support

Release Date Oct 05, 2015 ReadyNAS OS V6.4.0 Release Notes: RN102 & RN104 systems running firmware older than 6.2.1 should first update to 6.2.5, then update from 6.2.5 to 6.4.0. RN2120 systems running firmware older than 6.2.1 should first update to 6.2.4, then update from 6.2.4 to 6.4.0. All other systems can update directly to 6.4.0. Download Link: arm (RN102 / RN104 / RN202 / RN204 / RN212 / RN214 / RN2120) x86 (RN312 / RN314 / RN316 / RN516 / RN716x / RN3130 / RN3138 / RN3220 / RN4220) New ...

ReadyNAS OS Version 6.4.2 - NETGEAR Support

ReadyNAS OS V6.4.2 Release Notes: RN102 & RN104 systems running firmware older than 6.2.1 should first update to 6.2.5, then update from 6.2.5 to 6.4.2. RN2120 systems running firmware older than 6.2.1 should first update to 6.2.4, then update from 6.2.4 to 6.4.2. All other systems can update directly to 6.4.2. Download Link: arm (RN102 / RN104 / RN202 / RN204 / RN212 / RN214 / RN2120) x86 (RN312 / RN314 / RN316 / RN516 / RN716x / RN3130 / RN3138 / RN3220 / RN4220) Enhancements & Bug Fixes: Secu...

What hole size do I need to drill on the wall to mount the Orbi RBKWM wall mount? | NETGEAR Communities

What hole size do I need to drill on the wall to mount the Orbi RBKWM wall mount?There is nothing mentioned in the instructions manual!!! 

Rbs50yv2 wall mount | NETGEAR Communities

I need the wall mount for this product. It comes in the box. For some reason support refuses to help me source this item. It is model specific and required...

GS308T wall mount option | NETGEAR Communities

Hi all Ive just bought a GS308T which I was hoping to wall mount. However its doesnt appear to have the 'T' shaped holes for the screw heads and...

GS724T Wall Mount | NETGEAR Communities

Hello, I am trying to find out whether GS724T can be mounted vertically on the wall.I am looking for a switch that can be closed in a shallow...

Wall mount for RBS40V | NETGEAR Communities

Does anyone know of a wall mount that will work with the Orbi RBS40V?I would really like to mount it on the wall, but cannot find a wall mount that will fit...

Orbi Wall Mount Kit | NETGEAR Communities

I ordered and received an Orbi Wall Mount Kit from Netgear and wanted another one, but it doesn't give me an option to add one to the cart. It is not...

Orbi RBR50 Wall Mount | NETGEAR Communities

Does anyone know how to buy the wall mount for the Orbi RBR50 unit? I received an email about the item from Netgear but cannot find anywhere on the site to...

wall mount for RBS20 | NETGEAR Communities

Is there a wall mount for a RBS20 satellite?

Type and location of Antennas in Orbi... Wall Mount of Orbi | NETGEAR Communities

I'm using the Orbi wallmounts that I got from Amazon https://www.amazon.co.uk/gp/product/B0793LKH58/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 I noticed...

NightHawk M1 wall mount | NETGEAR Communities

Hello matesI am looking for a compatible wall mount for my Nighthawk M1.I did search based on the Dimensions: 105.5 (L) x 105.5 (W) x 20.35 (H) mm but...

Request: Wall Mount for Router | NETGEAR Communities

Any plans for a wall mount for the router?  My last two wifi routers could do that it would be good for the basement. 

Have a TV that needs hard wired in the living room and Network is up stairs | NETGEAR Communities

Hi All I have an Orbi and love it.. But I have the main unit and a wall mount satellite and All is good except my TV needs hard wired.. Is there an additiona...

Replacement Bracket for Orbi OUTDOOR | NETGEAR Communities

Is there anyway to get a replacement wall mount bracket for an Orbi Outdoor?  Ours broke.  I tried calling customer service several months ago and...

RBKWM10000S | NETGEAR Communities

Can anybody advise me how far the Orbi wall mounting bracket RBKWM10000S protrudes from the wall? Thanks.

Whish repeater | NETGEAR Communities

Hello,can someone please recommend a repeater with the following requirements:- consumer/semi office- Wifi 6- Mesh- POE in- Gbit Ethernet out- wall mounting...

Nighthawk M1 battery charging problem | NETGEAR Communities

I have just bought a Netgear Nighthawk M1 through Telstra to enable working in the field. Plugged into the wallmount to charge and the battery seems to drain...

orbi rbk13 question on mounting to the wall | NETGEAR Communities

I bought the cubes and I was curious if I could mount the router and satellites on their side.  I want to mount them on the wall but I don't want to...

Nighthawk M6 Pro SIGNAL STRENGTH through WALLS | NETGEAR Communities

Using Nighthawk M6 Pro to provide 2.4gz wifi network to operate three Wyze v3 cameras.  One camera is mounted outside on exterior wall.  This...

Orbi outdoor satellite is making clicking noises | NETGEAR Communities

The satellite is mounted on an outside wall, under an overhang, and has started making a fairly constant clicking noise. It appears from the app to be...

RBS50Y Power lead length | NETGEAR Communities

Does anyone know the length of the power lead:(a) Orbi connector to power block(b) Power block to UK plug I want to mount this on an outside wall and...

NETGEAR Redefines Guest WiFi with its Most Compact Wall-mount Access Point Yet - NETGEAR Blog

NETGEAR announced the WAX610W, a compact, wall-mount Wi-Fi 6 access point designed to deliver high-performance, cost-effective connectivity for hospitality environments, multi-dwelling units (MDUs), and education settings.

Orbi Wall Mount - Mounts for Orbi Router & Satellites - NETGEAR Blog

For optimal WiFi system performance and an attractive décor touch, mesh satellite nodes can be permanently affixed to walls or other partitions using purpose-designed NETGEAR Orbi Wall Mount Kits.

Unlock Your Home's Potential with NETGEAR's Holiday Deals - NETGEAR Blog

Pressroom

Welcome to NETGEAR PRESSROOM. Here you can download our latest news, images and videos. All content can be used rights-free for editorial purposes.

Theatres, Philharmonics, Cultural Centres NETGEAR Blog

The Police Cultural Center was upgraded with Harman AV technology for superior sound, control, and flexibility.

GS108MX Switch Unveiled: Modern Business Connectivity

NETGEAR is launching its latest unmanaged switch, the GS108MX, featuring one 10G/Multi-Gigabit Ethernet port for non-blocking uplink.

Introducing GS108X 8-Port Gigabit Switch w/SFP+ 10Gb Uplink - NETGEAR Blog

Meeting the needs of scaling businesses, NETGEAR is launching its latest unmanaged switch – the GS108X, featuring a 10G SFP+ port for non-blocking uplink over longer distances.

New MS305E and MS308E Multi-Gig Switches - NETGEAR Blog

NETGEAR has launched the multi-gig five port MS305E and multi-gig eight-port MS308E switches as a lightly smart managed upgrade to their unmanaged predecessors.

NETGEAR Launches New WiFi 7 Access Point

NETGEAR introduces the WBE710 access point, the newest addition to its WiFi 7 business access point lineup.

Take Your WiFi Outside - Outdoor WiFi Solutions

Extend your WiFi coverage outside with our selection of outdoor mesh systems. Compare and choose the best one for your needs.

Mesh WiFi Articles - NETGEAR Blog

Mesh WiFi systems create a seamless WiFi network throughout your home or business with a mesh system. Compare top-rated options and find the perfect one for your needs.

Cinema hall in Sieradz Culture Centre - NETGEAR Blog

Discover the Sieradz Culture Centre’s cinema hall with Dolby Atmos, Barco SP4K projection, and flexible seating for 100 guests.

Cloud Manageable Smart Switch - NETGEAR Blog

The cloud-managed NETGEAR S3600 Series Smart Switches, join the company’s line of switches designed to meet the growing demands for faster networking that today’s businesses require.

New 5-Port 2.5G Switches - NETGEAR Business - NETGEAR Hub

Upgrade your network with our Multigig 25G switches. Trust us for all your business needs.

Introducing the 8-Port 2.5gb Multi Gig Switch MS308 - NETGEAR Blog

To meet these growing needs of networks, NETGEAR is expanding its portfolio of next generation multi-gig switches with the introduction of the new MS308 8-port 2.5G Multi-gig Switch.

Bleisure WiFi: Work & Play Seamlessly - NETGEAR Blog

Explore the concept of 'Bleisure' with NETGEAR's WiFi solutions. Learn how to balance work and leisure activities with reliable and fast internet at home.

Tips for Building a Powerful DIY Home Office Network - NETGEAR Blog

"Empower your DIY home office network with Netgear's expert tips. Learn how to build a powerful and reliable network infrastructure for your home office, ensuring seamless connectivity, productivity, and efficient remote work.

The Stage of the Future: BERNEXPO – Powered by State-of-the-Art Event Technology from NETGEAR - NETGEAR Blog

From concerts to congresses, BERNEXPO redefines live experiences with NETGEAR’s next-generation AV-over-IP network backbone.

Meural Canvas II: The Perfect Gift for Art Lovers

Transform walls into galleries with Meural Canvas II. Perfect for art enthusiasts to display classics, NFTs, and personal memories in style.

Bieszczady Centre for Cultural Heritage - NETGEAR Blog

The challenge of creating an immersive, multidimensional multimedia space in which the creators of the Immersive Room at the Bieszczady Centre for Cultural Heritage in Ustrzyki Dolne can learn in an attractive form. Of course, multimedia can help you tell diverse stories.