Search results for: GS308

GS308T / GS310TP Firmware Version 1.0.0.9 - NETGEAR Support

New Features and Enhancements: Initial Release Limitation and Notes: A warning message shown below appears when first log in to the Web GUI: This is normal since self-signed certificate is used. Please click Advanced, then Proceed to link to log in, Download Link:http://www.downloads.netgear.com/files/GDC/GS308T/GS308T_GS310TP_V1.0.0.9.zip Last Updated:07/07/2025 | Article ID: 000060502 Was this article helpful? Yes No

GS308EPP Firmware Version 1.0.0.10 - NETGEAR Support

New Features: Support port mirroring from multiple ports. Warnings: Firmware files for GS308EP and GS308EPP are different. Be sure to download and install the correct firmware for your model. After upgrading to v1.0.0.7, the setting for Port LEDs on the home page will be incorrectly changed from ON to OFF, different from the actual Port LEDs on the front panel. To fix the issue, please reset the switch to factory default settings. Download Link: https://www.downloads.netgear.com/files/GDC/GS308E...

GS308T / GS310TP Firmware Version 1.0.1.2 - NETGEAR Support

New Features and Enhancements: Introduced an option to enable/disable switch discovery (SSDP/UPnP) protocol. Bug Fixes: Default IP route configuration disappears after reset Public and private certificate name string is updated in GUI Start and end time are wrong when configuring DST for European Time Zone Broadcast packets to UDP Port-123 are dropped when NTP is configured and client mode is set to ‘Unicast’ Untagged ports cannot be added to a VLAN using SNMP Cannot schedule the PoE timer when ...

GS308EPP Firmware Version 1.0.1.1 - NETGEAR Support

Bug Fixes: Fixes an interoperability issue with the Hikvision camera, model DS-2CD2146G2-ISUI and model DS-2CD2046G2-IU, in which the camera might not receive PoE power from the switch. Warnings: Read and follow these warnings before updating your firmware: The firmware files for model GS308EP and model GS308EPP are different. Be sure to download and install the correct firmware for your model. After you upgrade the firmware to version 1.0.0.7, the settings for the port LEDs on the HOME page are...

GS308EP Firmware Version 1.0.0.7 - NETGEAR Support

New Features and Enhancements: After the switch falls back to its default IP address (192.168.0.239), it continues to request a DHCP IP address every 5 minutes until: It acquires one from a DHCP server, Or, Is assigned a fixed/static IP address. Switch attempts to renew its DHCP lease when its IP address lease expires, as per RFC standards. Warnings: Firmware files for GS308EP and GS308EPP are different. Be sure to download and install the correct firmware for your model. After upgrading to v1.0...

GS308T / GS310TP Firmware Version 1.0.5.5 - NETGEAR Support

New Features: Add Secure Diagnostic Mode (SDM) to allow NETGEAR Support to establish secured connection for remote troubleshooting. This is disabled by default. Add Secure Shell (SSH) server for remote login. This is enabled by default. Lite command line interface (CLI). To find the Lite CLI Reference Manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page. Bug Fixes: Fixes the issue when an OUI is added, t...

GS308EPP Firmware Version 1.0.0.4 - NETGEAR Support

New Features and Enhancements: Initial Release Warnings: Firmware files for GS308EP and GS308EPP are different, please use the correct fie for your model. Download Link : https://www.downloads.netgear.com/files/GDC/GS308EPP/GS308EPP_V1.0.0.4.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentati...

GS308EPP Firmware Version 2.0.0.11 - NETGEAR Support

Release Date:July 7, 2026 New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Note: After you update to this firmware, the switch management page is only accessible from ports in VLAN 1, which is the default management VLAN. If you are accessing the switch from a port assigned to a different VLAN, you need to switch to a VLAN 1 port to regain access. Support for manual SNTP server configuration for system time synchronization. Suppo...

GS308EP Firmware Version 1.0.0.4 - NETGEAR Support

New Features and Enhancements: Initial Release Warnings: Firmware files for GS308EP and GS308EPP are different, please use the correct fie for your model. Download Link : https://www.downloads.netgear.com/files/GDC/GS308EP/GS308EP_V1.0.0.4.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation...

GS308EP Firmware Version 2.0.0.5 - NETGEAR Support

Bug fixes: Fixes the issue where the switch incorrectly forwards specific multicast traffic across different VLANs. Known Issues: After you upgrade the firmware to version 1.0.0.7, the Home page in the device UI incorrectly displays the port LED settings as OFF, while the physical port LEDs on the front panel display as ON. Workaround: To fix this issue, reset the switch to the factory default settings. Download Link: https://www.downloads.netgear.com/files/GDC/GS308EP/GS308EP_V2.0.0.5.zip Firmw...

GS308T / GS310TP Firmware Version 1.0.5.6 - NETGEAR Support

New Features: Supports the latest version 1.3 of the Transport Layer Security (TLS) protocol. Bug Fixes: Power Timer Schedule does not work for certain time zones. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before updating a firmware version prior to 1.0.5.5: We recommend against downgrading the firmware image to 1.0.2.2 or earlier version after updatin...

GS308T / GS310TP Firmware Version 1.0.3.2 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before updating a firmware version prior to 1.0.2.2 or later version: Because HTTPS has been disabled by default since v1.0.2.2, the device UI Home page does not display automatically after using HTTPS to upgrade to this firmware version. Open a new web browser tab and type the switch’s I...

GS308EP Firmware Version 1.0.0.6 - NETGEAR Support

New Features and Enhancements: Added an option on the device UI to disable or enable the uninterrupted PoE feature. Add a “REFRESH” button to the PoE port status feature on the device UI. Displays different colors for different link speeds when the port status is “UP” on the HOME page: Green =>1000Mbits, Yellow=>10/100Mbits. Warnings: Firmware files for GS308EP and GS308EPP are different. Be sure to download and install the correct firmware for your model. Download Link : https://www.downloads.n...

GS308E Firmware Version 1.00.08 - NETGEAR Support

V1.00.08 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). Security Issues: Various security fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuratio...

GS308EPP Firmware Version 1.0.0.7 - NETGEAR Support

New Features and Enhancements: After the switch falls back to its default IP address (192.168.0.239), it continues to request a DHCP IP address every 5 minutes until: It acquires one from a DHCP server, Or, Is assigned a fixed/static IP address. Switch attempts to renew its DHCP lease when its IP address lease expires, as per RFC standards. Warnings: Firmware files for GS308EP and GS308EPP are different. Be sure to download and install the correct firmware for your model. After upgrading to v1.0...

GS308EP Firmware Version 1.0.1.4 - NETGEAR Support

Enhancement: You can use Universal Plug and Play (UPnP) protocol to discover the device. Warnings: Read and follow these warnings before updating your firmware: Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the device as it is no longer supported from firmware version 1.0.1.4. Use NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight App to discover the switch in the same subnet. The firmware files for models GS308EP and model GS308EPP are different. Ensure you download an...

GS308E Firmware Version 1.00.10 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode. Default is Disable. Security Fixes: Various security fixes vulnerability and enhancements. Known Issues: To support the device UI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput can be affected if the rate is higher than the CPU can handle. Configuration settings from the Plus Utility cannot ...

GS308E Firmware Version 1.00.05 - NETGEAR Support

V1.00.05 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). New Features and Modification: The default admin password must be changed to a unique password during the first login. Changes the default Management Mode (System > Management > Switch Management Mode) from Web browser and Plus Utility to Web browser only. K...

GS308Ev4 Firmware Version 1.0.1.9 - NETGEAR Support

Bug Fixes: Fixes the issue where IPv6 multicast packets were incorrectly forwarded across different VLANs. Warnings: Read and follow these warnings before updating your firmware: As of firmware version 1.0.1.3, the NETGEAR Switch Discovery Protocol (NSDP) that was used by the old NETGEAR Switch Discovery Tool (NSDT) is no longer supported. Instead, now use the NDT or the latest NETGEAR Insight app to discover the switch in the same subnet. Download Link: https://www.downloads.netgear.com/files/G...

GS308T / GS310TP Firmware Version 1.0.4.4 - NETGEAR Support

Security Fixes: Fixes security vulnerability. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Bug Fixes: Fixes the issue that the RADIUS reauthentication configuration is not cleared after session timeout. Fixes the problem of the counter for Packets Received Without Errors is always zero. (Under Monitoring → Ports → Switch Statistics) Fixes that problem of Web GUI becoming inaccessible if accidentally disabling HTTP and HTTPS at the same time....

Three GS308E, PFSense, cannot get VLAN working on third switch | NETGEAR Communities

I'm working on getting VLAN setup in my home network.  All of the switches are GS308E and have the VLAN turned on for the type "Advanced 802.1Q...

PoE doesn't start_GS308EP | NETGEAR Communities

We use the GS308EP to manage 2 differents VLAN in our custom system. the port 1 is used to power on a RFID reader (FEIG MR102), the others ports are for...

Broken GS308EPP web gui after reverse proxy | NETGEAR Communities

Hello community, I put my switch GS308EPP behind a reverse proxy HTTP -> HTTPS on my Synology DS923+ which works well.Unfortunately, the errors come...

gs108v2 gs308ep DoS | NETGEAR Communities

I have both of those switches... The port turns off and has to be enabled to back on. The gs108v2 is connected to the gs308ep (poe is turned of on port...

GS308E not working, power led blinking | NETGEAR Communities

 My Netgear GS308E stopped working.When powered on, the power led and the top right led on ethernet port #8 blink.I'd be glad to get your advice.Regards

Only the GS308 series loses connection from the Wi-Fi router | NETGEAR Communities

  When I connect a Sony Wi-Fi router(NSD-G1000T) to Port 1 of a GS308 series switch, it receives an IP address from the DHCP server and functions as a...

Can I use a GS308E with Deco Ethernet Backhaul? | NETGEAR Communities

I am looking for a small managed switch for Ethernet Backhaul on the Deco, as the wireless connections randomly disconnect. Fortunately, my friend has a...

GS308EP Won't Factory Reset | NETGEAR Communities

So I have been using a GS308EP for my network for a while. I set it and forgot it and didn't leave a management port open. I'm changing my network now, so I...

GS308Ev4, GS305E - Help with uplinks/downlinks | NETGEAR Communities

Could I please have some help or confirmation that I have these setup correctly?  I'm weary that they are because I sometimes have trouble connecting to...

What happened to GS308T ? | NETGEAR Communities

Hello I am searching for a new switch and found Netgear's "GS308T"(notice the 'T' at the end, not to be confused with any other switch with a similar...

GS305EPP New Firmware But Not GS308EPP? | NETGEAR Communities

I see new firmware v2.0.04 for GS305EPP but not for GS308EPP.   I would think these run the same software.   Will new 2.0.0.4 firmware be...

Netgear GS308EP | NETGEAR Communities

Morning all from UK.Just purchased my first ever switch and decided to go for one with POE as I want to eventually run a couple of security cameras.I've only...

Re: Unable to sign into GS308E | NETGEAR Communities

I'm having some issues with this product.  I recently purchased it and set it up last week.  But as soon as I set it up via the admin page and...

SSDP multicast leakage across VLAN on GS308EP | NETGEAR Communities

SetupSwitch is in Advanced 802.1Q VLAN modePort 1-6 connected to VLAN 1. Port 1-6 untagged, port 7-8 exclude.Port 7-8 connected to VLAN 2. Port 1-6 exclude,...

Multiple GS308EPP switches and vlan | NETGEAR Communities

Hi All, I am trying to configure vlan traffice to travel true 4 switches. Now i configured vlan and this is working on my first switch. But for the...

GS308EPP PoE & REOLINK PoE doorbell | NETGEAR Communities

GS308EPP:Port (PoE) doesent work regardless on the PoE setting with my NEW PoE Reolink doorbell (V3) -->IEEE 802.3afWhat is strange is the fact that the...

Can I use GS308E unmanaged? | NETGEAR Communities

Hello I have bought about 15EA NETGEAR GS308E about 3 years ago I didn't know that GS308E was for managed switch (confused with GS308...

Mac based Vlan on a GS308Ev4 | NETGEAR Communities

Hi can anyone advise if I can set up mac or ip address VLANs on the GS308?

GS308Ev4 Tagged traffic issue | NETGEAR Communities

Hi all. Let´s start with a 2025 best wishes.I´m new to this type of switch and Vlans as a whole. Bare with me.I think best is to describe my setup so that it...

Newbie to VLANs - GS308Ev4 | NETGEAR Communities

All Before I get into any detail around what I want to achieve long term, I have a very basic question.... please bear with, as first time I am trying...

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Experience High Performance with NETGEAR's WiFi 6

Experience the future of connectivity with NETGEAR's high-performance WiFi 6, offering faster speeds, increased capacity, and improved efficiency.

Introducing GS108X 8-Port Gigabit Switch w/SFP+ 10Gb Uplink - NETGEAR Blog

Meeting the needs of scaling businesses, NETGEAR is launching its latest unmanaged switch – the GS108X, featuring a 10G SFP+ port for non-blocking uplink over longer distances.

GS108MX Switch Unveiled: Modern Business Connectivity

NETGEAR is launching its latest unmanaged switch, the GS108MX, featuring one 10G/Multi-Gigabit Ethernet port for non-blocking uplink.

Introducing the NETGEAR S350 Series v2: Powerful PoE+ Smart Switches - NETGEAR Blog

The NETGEAR S350 Series v2 Gigabit PoE+ Smart Managed Essentials Switches are designed to give growing organizations enterprise-grade capabilities - without the complexity or cost that usually comes with them.

Upgrade Your Surveillance With PoE - NETGEAR Hub

Read our blog on upgrading your surveillance with PoE switches. Learn more here.

New MS305E and MS308E Multi-Gig Switches - NETGEAR Blog

NETGEAR has launched the multi-gig five port MS305E and multi-gig eight-port MS308E switches as a lightly smart managed upgrade to their unmanaged predecessors.

10 Gig Routers - Find Multi-Gig Home Network Tips

Now is the right time to invest in a future-proofed 10 Gig Router or Multi-Gig Mesh System. Unlock exciting new home networking technology.

Business IT Networking Articles - NETGEAR Blog

Discover how to get the most out of your business IT network with the latest technology and best practices. Learn More.

Introducing the 8-Port 2.5gb Multi Gig Switch MS308 - NETGEAR Blog

To meet these growing needs of networks, NETGEAR is expanding its portfolio of next generation multi-gig switches with the introduction of the new MS308 8-port 2.5G Multi-gig Switch.

NETGEAR Unveils GS724Tv6 & GS748Tv6: Future-Proof Smart Switches

Discover NETGEAR's latest smart switches, GS724Tv6 and GS748Tv6, designed for efficient, future-ready network management in growing businesses.

Introducing the NETGEAR XS724EMv2 Switch: Smarter, Faster, and Built for the Future - NETGEAR Blog

NETGEAR maintains its leadership in multi-gigabit switching technology with the introduction of the XS724EMv2 24-Port 10G/Multi-Gigabit Easy Smart Managed Switch.

Gaming WiFi Gift Guide - Perfect Tech for Gamers

Find the ideal tech gifts for gamers with NETGEAR's Gaming WiFi Gift Guide. Explore top picks to boost gaming speed and enhance online performance.

Switch Management Types Explained - NETGEAR Blog

NETGEAR Switches are primarily designed around Management Style, so it’s important to understand the capabilities and use cases for each switch management style.