Search Results for: GS108GE

GS108Ev3 Firmware Version 2.00.09 - NETGEAR Support

New Features and Enhancements: Added the option to disable/enable Plus Utility Management through Web GUI. Bug Fixes: Fixed the issue that regardless of current setting, port speed is changed to “Auto” (autonegotiation) and flow control is changed to “Enable” after running the cable test on a port. Fixed the security vulnerability issue related to CSRF (Cross-Site request forgery) attacks. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enab...

GS108PEv3 Firmware Version 2.06.24 - NETGEAR Support

New Features: Can enable and disable the power saving mode (IEEE 802.3az) on the Switch Information page. (In the device UI, select System > Management > Switch Information.) Bug Fixes: Fixes the issue where the settings for the 802.1Q VLAN Advanced function (in the device UI, select VLAN > 802.1Q > Advanced) are missing in the German version. Known Issues: When you access the device UI, all HTTP packets are forwarded to the embedded CPU. If flow control is enabled, the throughput is impacted if...

GS108PEv3 Firmware Version 2.06.14 - NETGEAR Support

V2.06.14 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). Security Fixes: Various security fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration...

GS108Ev3 Firmware Version 2.00.08 - NETGEAR Support

Bug Fixes: Fixed the web GUI counter issue where Bytes Received and Bytes Sent (under System > Monitoring > Port Statistics) gets reset to zero after reaching 4294967295. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 30...

GS108Ev4 Firmware Version 1.0.1.13 - NETGEAR Support

Release Date: March 30, 2026. New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Support for manual SNTP server configuration for system time synchronization. Bug Fixes: Fixes the issue where multicast traffic was incorrectly forwarded across different VLANs. Warnings: Read and follow these warnings before updating your firmware: As of firmware version 1.0.1.3, the NETGEAR Switch Discovery Protocol (NSDP) that was used by the old N...

GS108PEv3 Firmware Version 2.06.16 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be u...

GS108EP / GS108EPP Firmware Version 2.0.0.11 - NETGEAR Support

Release Date: June 29, 2026 New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Note: After you update to this firmware, the switch management page is only accessible from ports in VLAN 1, which is the default management VLAN. If you are accessing the switch from a port assigned to a different VLAN, you need to switch to a VLAN 1 port to regain access. Support for manual SNTP server configuration for system time synchronization. Sup...

GS108Ev4 Firmware Version 1.0.1.9 - NETGEAR Support

Bug Fixes: Fixes the issue where IPv6 multicast packets were incorrectly forwarded across different VLANs. Warnings: Read and follow these warnings before updating your firmware: As of firmware version 1.0.1.3, the NETGEAR Switch Discovery Protocol (NSDP) that was used by the old NETGEAR Switch Discovery Tool (NSDT) is no longer supported. Instead, now use the NDT or the latest NETGEAR Insight app to discover the switch in the same subnet. Download Link: https://www.downloads.netgear.com/files/G...

GS108Ev3 Firmware Version 2.06.16 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be u...

GS108Ev3 Firmware Version 2.06.08 - NETGEAR Support

V2.06.08 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese: The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日本語). New Feature: Add a new column to Port Status to display “Max MTU” supported by the device. Modification: Change Web GUI page title from “NETGEAR ProSAFE Plus Switch” to “NETGEAR GS108Ev3” Change production description from “ 8-Port Gigabit ProSAFE Plus Swit...

GS108Ev4 Firmware Version 1.0.1.1 - NETGEAR Support

Bug Fixes: Fixes the issue where packets that are tagged with high priority are not being treated correctly when QoS mode is set to 802.1P/DSCP (see SWITCHING > QOS). Download Links: https://www.downloads.netgear.com/files/GDC/GS108Ev4/GS108Ev4_V1.0.1.1.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the...

GS108PEv3 Firmware Version 2.00.12 - NETGEAR Support

New Features and Enhancements: Implemented new and more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). WARNING: After GS108PEv3 are upgraded to FW version V2.00.12 or higher, it cannot work with Plus Utility version prior to V2.4.3. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impac...

GS108PEv2 Firmware Version 1.00.07 - NETGEAR Support

New Feature and Enhancement: None. Bug Fixes: Fix the problem with port-based VLAN where uplink ports (VLAN Group = all) stops forwarding packet to other VLAN members after a power cycle. Known Issues: None Limitations: Cable Test is designed to work specifically with Category 5 (CAT-5) cable. Incorrect test result may be shown if different type of cable is used. The accuracy of the Cable Test is within 5 meters. So, testing with cable shorter than 5 meters may yield incorrect result. When “Bloc...

GS108PEv3 Firmware Version 2.00.08 - NETGEAR Support

Bug Fixes: Fixed the web GUI counter issue where Bytes Received and Bytes Sent (under System > Monitoring > Port Statistics) gets reset to zero after reaching 4294967295. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 30...

GS108Ev3 Firmware Version 2.06.14 - NETGEAR Support

V2.06.14 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). Security Fixes: Various security fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration...

GS108PEv3 Firmware Version 2.00.09 - NETGEAR Support

New Features and Enhancements: Added the option to disable/enable Plus Utility Management through Web GUI. Bug Fixes: Fixed the issue that regardless of current setting, port speed is changed to “Auto” (autonegotiation) and flow control is changed to “Enable” after running the cable test on a port. Fixed the security vulnerability issue related to CSRF (Cross-Site request forgery) attacks. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enab...

GS108Ev2 Firmware Version 1.00.06 - NETGEAR Support

New Feature and Enhancement: None. Bug Fixes: Packets with VLAN tag are forwarded out from ports that should have the VLAN tag removed. Packets without VLAN tag are forwarded out from ports that should have the VLAN tag. Known Issues: None Limitations: Cable Test is designed to work specifically with Category 5 (CAT-5) cable. Incorrect test result may be shown if different type of cable is used. The accuracy of the Cable Test is within 5 meters. So, testing with cable shorter than 5 meters may y...

GS108Ev3 Firmware Version 2.00.03 - NETGEAR Support

New Features & Enhancements Initial Release Limitations: Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It could be anywhere from 300 to 600 seconds. IGMP host timeout is not exactly 260 seconds. It could be anywhere from 260 to 520 seconds. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. Download Link: http://www.downloads.net...

GS108Ev3 Firmware Version 2.06.17 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Known Issues: To support the device UI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by device UI, and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It...

GS108Ev3 Firmware Version 2.06.03 - NETGEAR Support

New features and modifications: V2.06.03 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the postfix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日本語). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). WARNING: After GS108Ev3 are upgraded to FW version V2.06.03 or higher, it cannot work with Plus Utility ve...

NETGEAR GS108GE AND GSM4230PX - ECCN | NETGEAR Communities

I want to confirm the ECCN for GS108GE AND GSM4230PX. is it 5A991? Or something else like 5A002? I have emailed netgear compliance as listed but no response.

Web firmware upgrade for GS108Ev3 failing | NETGEAR Communities

I wante to upgrade to version 2.00.05 but don't have a Windows machine handy. So I thought I'd use the web interface. After entering "loader mode" on...

GS108ev3 - Utility stops responding | NETGEAR Communities

Just purhcased a GS108Ev3 switch, and I was able to open up the ProSafe Plus Config utility and select the switch to assign an IP address.  The switch...

GS108Ev3 Firmware Upgrade Issues | NETGEAR Communities

This is still a problem. I bought the GS108E (v3) last week. I couldn't configure the switch using 192.168.0.239 (my PC has a static IP of 192.168.0.200). I...

GS108Ev3 Cannot set VLAN for management interface | NETGEAR Communities

I just purchased a GS108Ev3 because I needed some simple VLAN segregation for a small group of machines "down the hall" from my core networking equipment....

Weak wifi with Netgear GS108E | NETGEAR Communities

I get a very weak download speed on wifi after I plugged in my Netgear GS108E switch. I have a 100/10 (down/up) Mbit/s fiber connection. Have tried...

No Gigabit connection GS108Ev3 | NETGEAR Communities

Hi, recently I bought a GS108Ev3 to upgrade my GS105E. The problem is that I can't get a Gigabit connection on my laptop (Asus K52JC with JMicron...

Steam download overloads GS108Ev3 | NETGEAR Communities

Hello everyoneI'm using two GS108Ev3 to connect my devices. I also use 2 STB that provide TV (something like Netflix but from Switzerland). The on STB...

GS108E-v3 DHCP VLAN | NETGEAR Communities

I recently purchased this switch and was surprised to learn that when in DHCP client mode, it will pull an address from any device on any VLAN.I would have...

GS108E only accessible over default VLAN | NETGEAR Communities

Hello, is it possible to set the IP address of the device on a tagged Vlan instead of the native Vlan?I'd like to manage the Switch from behind a trunk...

GS105E, GS108E, and WG102, all in a VLAN - how? | NETGEAR Communities

I have a GS108E connecting 4 point of sale systems, linking to a GS105E connecting to a point of sale server and WG102 access point with 2 VLAN's on 2...

GS108E FW upgrade OK but no GUI | NETGEAR Communities

Hi,Just upgraded my new GS108E switch and updated the firmware from 1.00.09 to 1.00.12. Upgrade went fine and at 100% the reboot message came. Switch comes...

GS108E Firmware Upgrade Issues | NETGEAR Communities

Hi,I recently tried to upgrade to v1.00.06 firmware on a GS108E I had purchased. However, I have been having severe problems trying to upgrade it and I fear...

Netgear GS316EP reports as GS108EV3 after factory reset | NETGEAR Communities

We have an unused Netgear GS316EP 16 port switch.   During troubleshooting we were asked to factory reset the switch.  After factory reset it...

Netgear GS108PE - Port blinking without cable, no network connection | NETGEAR Communities

Hello I am using the Netgear GS108PEv3.The switch runs 24/7.The connection of the switch hangs 2-3 times a year.Sometimes only on one port, like just...

Switch GS108Ev3 status export control | NETGEAR Communities

Hi,  What is the export control number for the switch GS108Ev3 ?It is 5A

Netgear GS108E Prosafe Webinterface not responding | NETGEAR Communities

Hi, I´m trying to configure this switchtype. I have two of them in front of me, I factory resetted them. I am directly connected with my Lan Adapter to...

GS108Ev3 fragmented IP packet dropping | NETGEAR Communities

Model: GS108Ev3 - 8-Port Gigabit Ethernet Smart Managed Plus SwitchFirmware: V2.06.24EN I noticed that when I fragment a SYN packet in very small...

Visio Stencil for GS108PEv3 | NETGEAR Communities

Hello,  Do you know where can I get FREE Visio Stencil for 8-port Switch GS108PEv3 model? Thanks in advance,Marco 

Changing MTU Size on a GS108PEv3 | NETGEAR Communities

How do I change the MTU size on a GS108PEv3 managed switch? Neither the web browser nor the ProSafe Plus app allow me to change the MTU size on any of...