Search Results for: GS105GE

GS105Ev2 Firmware Version 1.4.0.2 - NETGEAR Support

Bug Fixes: Fixed the problem where the configuration file saved from Web GUI cannot be restored via ProSAFE Plus Configuration Utility and vice versa Note: Please upgrade your ProSAFE Plus Configuration Utility to version V2.3.5 in order to use the configuration file saved using Web GUI from v1.4.0.2 firmware Limitations: Switch configuration will be kept after upgrading the firmware to v1.4.0.2, but the configuration file previously saved on the PC cannot be restored after the FW is upgraded to...

GS105PE Firmware Version 1.3.0.3 - NETGEAR Support

New Features & Enhancements: Fixed the problem that DHCP mode shows disabled on Web GUI even though it is actually enabled. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is GS105PE_V1.3.0.3.bin Download Link: http://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.3.0.3.zip Last Updated:10/17/2025 | Article ID: 25659 Was this article helpful? Yes No

GS105PE: PoE troubleshooting - NETGEAR Support

The GS105PE is a PoE passthrough switch which can only be powered by Power Over Ethernet (does not accept AC power). GS105PE can be powered by either IEEE 802.3af or IEEE 802.3at from either a PoE switch or a PoE injector. When powered by IEEE 802.3af: The GS105PE can power up only one Class 1/2 PoE device. When powered by IEEE 802.3at: The GS105PE can power up only one Class 0/3 PoE device or two class 1/2 devices. Note on 802.3at interop issues with certain Cisco switches: Interop problems hav...

GS105Ev2 Firmware Version 1.3.0.1 - NETGEAR Support

New Features & Enhancements: Supports Web GUI management. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is GS105Ev2_V1.3.0.1.bin Download Link: http://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.3.0.1.zip Last Updated:10/17/2025 | Article ID: 25397 Was this article helpful? Yes No

GS105PE Firmware Version 1.6.0.3 - NETGEAR Support

New feature and Modifications: In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese (日本語). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). Implemented new access control WARNING: After GS105PE is upgraded to FW version V1.6.0.3 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgrade Proce...

GS105PE Firmware Version 1.3.0.1 - NETGEAR Support

New Features & Enhancements: Supports Web GUI management. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is GS105PE_V1.3.0.1.bin Download Link: http://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.3.0.1.zip Last Updated:10/17/2025 | Article ID: 25396 Was this article helpful? Yes No

GS105E Firmware Version 1.02.04 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.25 or newer before upgrading the GS105E firmware. Older versions of the Plus Utility do not support the password encryption required by V1.02.02 and newer firmware.. New Features and Changes: None Modifications / Fixes: Fix the problem of not able to login to GS105E after upgrading its firmware from V1.01.25 to V1.02.02. Known issues: None. Limitations: None. Installation Instructions Using the Downloa...

GS105Ev2 Firmware Version 1.6.0.24 - NETGEAR Support

Release Date: March 30, 2026. New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Bug Fixes: Fixes the issue where multicast traffic was incorrectly forwarded across different VLANs. Warnings: Read and follow these warnings before updating your firmware: As of firmware version 1.6.0.15, the NETGEAR Switch Discovery Protocol (NSDP) that was used by the old NETGEAR Switch Discovery Tool (NSDT) is no longer supported. Instead, now use ...

GS105EP / GS105EPP Firmware Version 2.0.0.10 - NETGEAR Support

Release Date: June 29, 2026 New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Note: After you update to this firmware, the switch management page is only accessible from ports in VLAN 1, which is the default management VLAN. If you are accessing the switch from a port assigned to a different VLAN, you need to switch to a VLAN 1 port to regain access. Support for manual SNTP server configuration for system time synchronization. Sup...

GS105PE Firmware Version 1.6.0.6 - NETGEAR Support

New Features: The default admin password must be changed to a unique password after the first login. Modifications: Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only. Download Link: http://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.6.0.6.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. After GS105PE is upgraded to FW version...

GS105E Firmware Version 1.02.02 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.24 or newer before upgrading the GS105E firmware. Older versions of the Plus Utility do not support the password encryption required by V1.02.02 firmware. New Features and Changes: Allow the forwarding of ICMP PING packet with size greater than 512 bytes. Add password encryption Modifications / Fixes: Change the default setting of Block Unknown Multicast from enable to disable. Known issues: None. Limi...

GS105Ev2 Firmware Version 1.6.0.25 - NETGEAR Support

Release Date: July 02, 2026 Bug Fixes: Fixes the issue where restoring an older firmware configuration causes the management VLAN ID to be set to an invalid value, making the switch management GUI inaccessible. Warnings: Read and follow these warnings before updating your firmware: As of firmware version 1.6.0.15, the NETGEAR Switch Discovery Protocol (NSDP) that was used by the old NETGEAR Switch Discovery Tool (NSDT) is no longer supported. Instead, now use the NDT or the latest NETGEAR Insigh...

GS105PE Firmware Version 1.4.0.6 - NETGEAR Support

New Features and Enhancements: Added the option to disable/enable power saving mode. Bug Fixes: Changed the Flow Control (System > Status > Switch Status) default setting from enabled to disabled. Fixed the problem where the port 1 will link at 100M instead of 1000M after upgrading the firmware to version v1.4.0.2. Fixed the PoE interoperability issue with certain PoE+ PSE or injector devices like Meraki MS220-8P, Intellinet 560566, and HP JG350A. GS105PE will initially show it is being powered ...

GS105Ev2 Firmware Version 1.6.0.6 - NETGEAR Support

New Features: The default admin password must be changed to a unique password after the first login. Modifications: Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only. Download Link: http://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.6.0.6.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. After GS105Ev2 is upgraded to FW vers...

GS105PE Firmware Version 1.6.0.17 - NETGEAR Support

Bug Fixes: Fixes the issue where port 5 incorrectly adjusts PoE power requests from the powered device (PD). Fixes the issue where a subnet mask length set below 24 causes the switch to reject IP addresses using the following patterns: x.x.x.255 and x.x.x.0. Example: If the subnet mask length is IP address/22, it rejects 172.16.16.255/22 and 172.16.17.0/22. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.net...

GS105PE Firmware Version 1.5.0.5 - NETGEAR Support

Fixes and Modifications: Fixed the issue that there is a chance where link cannot be established with random port after power cycle WARNING: Once GS105PE FW is upgraded to V1.5.0.4, it is imperative to upgrade the bootloader also. Please login to switch using web GUI. V1.5.0.4 FW will prompt you automatically for the required bootloader version. Please make sure you pick the right version. Incorrect version will cause the switch to become inoperable. Once you have upgraded both FW and bootloader...

GS105Ev2 Firmware Version 1.6.0.10 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Download Link: https://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.6.0.10.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. When the GS105PE is upgraded to firmware versi...

GS105EP / GS105EPP Firmware Version 2.0.0.3 - NETGEAR Support

Enhancements: Initial release with production enhancements Warnings: Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the device as it is no longer supported from firmware version 1.0.1.4. Use NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight App to discover the switch in the same subnet. The firmware file for models GS105EP/GS105EPP is different from the file for model GS305EP. Ensure you download and install the correct firmware for your model. Known Issues: After you u...

GS105Ev2 Firmware Version 1.5.0.5 - NETGEAR Support

Fixes and Modifications: Fixed the issue that there is a chance where link cannot be established with random port after power cycle. WARNING: After GS105Ev2 is upgraded to FW version V1.5.0.4 or higher, it cannot work with Plus Utility version prior to V2.4.3. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgrade Procedure: Download the new firmware 1.5.0.4 from NETGEAR product support Website and store it in local PC, and remember its location in the PC...

GS105PE Firmware Version 1.6.0.10 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Download Link: https://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.6.0.10.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. When the GS105PE is upgraded to firmware version...

GS105 Letter Of Volatility | NETGEAR Communities

Hello,Where can I find a Letter Of Volatility of a GS105GE ethernet switch ?Thanks

Can't get GS110TP to work as simple as GS105E | NETGEAR Communities

For my work I have to check services going over utp links in different vlans. I used a GS105E with its mirror function. I can connect the GS105E without any...

GS105E, GS108E, and WG102, all in a VLAN - how? | NETGEAR Communities

I have a GS108E connecting 4 point of sale systems, linking to a GS105E connecting to a point of sale server and WG102 access point with 2 VLAN's on 2...

GS105ev2 firmware breaks prosafe plus | NETGEAR Communities

The 2 latest firmwares for this model removed the switch management mode options and the Prosafe Plus Utility can't find the switch. Tried both...

GS105E V2 Firmware "issue" | NETGEAR Communities

I've updated the firmware (1.6.0.21) via the Prosafe Plus utility only to find it is now not seen by said PP. I can access it via the web but I find that I...

Netgear GS105e mismatch | NETGEAR Communities

Starting the cable tester it gives a mismatch (Cable Fault Distance 6 meters) at port 1.  The other cables are OK.  After replacing the...

GS105E Statement of Volatility | NETGEAR Communities

Hello, Could I be provided with a statement of volatility for the GS105E? Thank you!

NETGEAR GS108GE AND GSM4230PX - ECCN | NETGEAR Communities

I want to confirm the ECCN for GS108GE AND GSM4230PX. is it 5A991? Or something else like 5A002? I have emailed netgear compliance as listed but no response.

5-Port Gigabit Ethernet Plus Switch (GS105Ev2) DST Error Message on Mac | NETGEAR Communities

5-Port Gigabit Ethernet Plus Switch (GS105Ev2)Switch up and running, however when I attempt to launch on (Mac mini M2 Pro) the DST comes back with message...

GS105E acting like an unmanaged switch | NETGEAR Communities

Hi all,i just pulled out an old GS105E of my storage.Unfortunatley it acts more like an unmanaged switch.If I put in on my network and connect a computer it...

Gs105Ev2 | NETGEAR Communities

After 3 months of owning company bricked my switch and during the 3 month support it wouldn’t work without contacting support to let them allow access to the...

Letter of Volatility GS105E GS108E | NETGEAR Communities

Hello,May I please get Letters of Volatility (LOVs) for the GS105E and GS108E?  I found prior discussions but the links were only valid for 48...

GS105Ev2 - Unable to access switch using a browser | NETGEAR Communities

For nearly 10 years I'm a happy user of my GS105Ev2. Now I want to log into the UI again, but (of course) did not remember any credentials. I've reset the...

GS105Ev2 Update Firmware Beyond V 1.2.0.5 | NETGEAR Communities

I have an unused GS105Ev2 Plus Switch that I have been playing with. On an apparently misguided whim, I downloaded and flashed the original V1.2.0.5...

Stripping/Tagging ISP VLAN on GS105Ev2 | NETGEAR Communities

Hi all, I am considering purchasing a GS105Ev2 managed switch. I want to check it will meet my needs. My new Internet Service Provide...

Netgear GS105E Setup Cinfiguration | NETGEAR Communities

(Just noticed i posted this same post in the wrong discussion subsection - if a Mod. can delete that post please).  HiJust purchased a Netgear...

Netgear GS105PE firmware upgrades | NETGEAR Communities

I have a number of Netgear GS105PE switches in my network which were all running FW V1.6.0.6.  They were all happily behaving themselves (I know if it...

GS105Ev2 does not get IP address from DHCP | NETGEAR Communities

I have a brand new GS105Ev2 (GS105E-200NAS).  It already has the latest firmware as of today, which is V1.6.0.11.  I attached it to the...

GS105PE Not allowing firmware upgrade | NETGEAR Communities

When I try to put the switch into bootloader mode to upgrade the firmware, the switch stops responding to pings, and refuses to allow me to do anything with...

GS105Ev2 switch admin page automatically logout issue | NETGEAR Communities

OS: Win 11I attempted to access the switch admin page using the provided Switch Discovery Tool for Windows. The tool successfully connected to the switch and...