Search results for: GSM4212P

M4250 Firmware Version 13.0.5.26 - NETGEAR Support

Release Date: April 29, 2026 This firmware supports the GSM4210PD, GSM4210PX, GSM4212P, GSM4212PX, GSM4212UX, MSM4214X, and XSM4216F models. Enhancements: The AV UI provides the following enhancements: Support for new AJA AV Network profile. Support for new Audio Video AVB MILAN profile. Support for new Audio Video AVB MILAN with Dante PTPv1 PTPv2 or AES67 profile. Support for new AUDAC Audio and Control Network profile. Support for new BluOS AV profile. Support for Color Palettes to the profile...

M4250 Firmware Version 13.0.5.24 - NETGEAR Support

Release Date: February 12, 2026 This firmware supports the GSM4210PD, GSM4210PX, GSM4212P, GSM4212PX, GSM4212UX, MSM4214X, and XSM4216F models. Enhancements: The AV UI provides the following enhancements: Support for the Default profile with IGMP Plus enabled. Updated the Data profile to disable IGMP. Updated the Audio Basalte Multiroom profile to disable IGMP and MLD snooping. Updated the Audio Dante profile to remove storm-control for broadcast traffic. Updated the Lighting profile to remove s...

M4250 Firmware Version 13.0.6.8 - NETGEAR Support

Release Date: September 29, 2026 This firmware supports the GSM4210PD, GSM4210PX, GSM4212P, GSM4212PX, GSM4212UX, MSM4214X, and XSM4216F models. Enhancements: The AV UI provides the following enhancements: Support for the following new AV profiles: Turtle Profile Just Add Power Updates for the following existing AV profiles: Sonos: Updated profile configurations AVoIP Lightware: Updated profile configurations Audio-Technica: Updated default profile color Audio AES67: Updated profile descriptions...

M4250 Firmware Version 13.0.5.20 - NETGEAR Support

Release Date: October 23, 2025 This firmware supports the GSM4210PD, GSM4210PX, GSM4212P, GSM4212PX, GSM4212UX, MSM4214X, and XSM4216F models. Enhancements: The AV UI provides the following enhancements: Support for new profiles: Visionary Advanced Multi-Domain G&D KVM-over-IP Poly StudioNet Modular Room URC Automation Avid S6L Updated the default web browser protocol to HTTPS Added interface descriptions that specify the VLAN ID, the profile name and the profile template Updated AV profile desc...

NMS300 Software Release 1.6.0.26 - NETGEAR Support

Enhancements on 1.6.0.26: Added new support models M4250 Series: GSM4212P, GSM4212PX, GSM4212UX, MSM4214X, XSM4216F Download Link: Win32 bit: https://www.downloads.netgear.com/files/GDC/NMS300/NMS300_V1.6.0.26(Win32).zip Win64 bit: https://www.downloads.netgear.com/files/GDC/NMS300/NMS300_V1.6.0.26(Win64).zip Firmware Update Instructions: There are 2 installers: one for 32-bit Windows OS, and another for 64-bit Windows OS. Download the appropriate zip file from the web site for either the 32-bit...

NETGEAR Engage Controller Supported Devices - NETGEAR Support

The Engage Controller supports the following device models: Pro Routers: PR460X WiFi Access Points: WBE718, WBE758, WAX608Y Fully Managed Switches: M4250 series: Model SKU M4250-8G2XF-PoE+ GSM4210PX M4250-9G1F-PoE+ GSM4210PD M4250-10G2F-PoE+ GSM4212P M4250-10G2XF-PoE+ GSM4212PX M4250-10G2XF-PoE++ GSM4212UX M4250-12M2XF MSM4214X M4250-16XF XSM4216F M4250-26G4F-PoE+ GSM4230P M4250-26G4F-PoE++ GSM4230UP M4250-26G4XF-PoE+ GSM4230PX M4250-40G8F-PoE+ GSM4248P M4250-40G8XF-PoE+ GSM4248PX M4250-40G8XF-P...

NETGEAR AV Line of Fully Managed Switches M4250 Series - NETGEAR Support

NETGEAR AV Line of Fully Managed Switches M4250 SeriesThe following table lists the port and PoE configurations for the 8-port M4250 series of fully managed switches:ModelSKUPoE Ports 1GBASE-T RJ-45Non-PoE Ports 1GBASE-T RJ-45Fiber PortsPoE BudgetM4250-9G1F-PoE+GSM4210PD8 x PoE+ (802.3at) 11 x 1G SFP110WM4250-8G2XF-PoE+GSM4210PX8 x PoE+ (802.3at) 2 x 10G SFP+ 220WM4250-10G2F-PoE+GSM4212P8 x PoE+ (802.3at) 2 2 x 1G SFP125WM4250-10G2XF-PoE+GSM4212PX8 x PoE+ (802.3at) 2 2 x 10G SFP+ 240WM4250-10G2X...

M4250 Firmware Version 13.0.4.13 - NETGEAR Support

Enhancements: Adds a new profile: Waves Soundgrid. Changes the start time from 00 hours to 12 hours for configuration of the date and time. Allows you to configure an out of band (OOB) IP address without requiring a gateway IP address. Allows you to add a static route with a gateway IP address that is on a different subnet. Bug Fixes: Fixes the issue where the SNMP object is not available for the preferred auto | master | slave CLI command. Fixes the issue where model GSM4212PX crashes and reboo...

M4250 Firmware Version 13.0.4.13 - NETGEAR Support

Enhancements: Adds a new profile: Waves Soundgrid. Changes the start time from 00 hours to 12 hours for configuration of the date and time. Allows you to configure an out of band (OOB) IP address without requiring a gateway IP address. Allows you to add a static route with a gateway IP address that is on a different subnet. Bug Fixes: Fixes the issue where the SNMP object is not available for the preferred auto | master | slave CLI command. Fixes the issue where model GSM4212PX crashes and reboo...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

GSM5212P/GSM7212P/GSM7212F/GSM7224P Firmware Version 10.0.1.21 - NETGEAR Support

Applicable Models: M4100-12GF,M4100-D12G-POE+,M4100-24G-POE+,M4100-12G-POE+ New Features: L2+ with static routing. L3 routing is wire-speed with up to 16 static routes (IPv4). Enhance VoIP, support both OUI based and protocol based VoIP. Advanced classifier-based hardware for L2, L3, L4 security and prioritization. Advanced multicast filtering with IGMP and MLD snooping and querier modes. IPv4/IPv6 ingress traffic filtering (ACLs) and prioritization (QoS-Diffserv). Upgrade procedure: Save the cu...

GSM5212P/GSM7212P/GSM7212F/GSM7224P Firmware Version 9.0.2.18 - NETGEAR Support

Bug Fixes: Some ports don't learn mac or forward streams after speed changes more times Combo port 100M link down when change speed from 10 to 100M with SmartBits FE (LAN3100A). Upgrade PoE controller firmware to 1.0.2.1 Upgrade procedure Save the current configuration data. Normally the firmware will preserve the original configuration in the switch, however, just in case something went wrong during the upgrade, you may want to save a copy of current running configuration. To do so, go to 'Main...

GSM5212P/GSM7212P/GSM7212F/GSM7224P Firmware Version 9.0.2.13 - NETGEAR Support

New Features/Enhancements: Name Description 1 All of PoE ports support 802.3at(PoE+) 2 Support PoE timer control 3 Support MVR(Multicast Vlan Registartion) 4 Support ACL Wizard( GUI only) 5 Console port baud rate changed to 115200 6 Support mini-USB console port Upgrade procedure Save the current configuration data. If you have not setup any special functions on the existing switch other than the management IP address, or you have saved a copy of the configuration in a text file, proceed to the ...

GSM5212P/GSM7212P/GSM7212F/GSM7224P Firmware Version 9.0.2.15 - NETGEAR Support

New Features/Enhancements: Support Registration page. Bug Fixes: GUI: only support '0-6' as egress queue on IPv6 route configure page(CLI can support 0-7). GUI: need to support the name with blanks(space character) in the page of lag configure/mem page. GUI: unable to download IAS user database to switch through HTTP mode. DUT still sent out SNMP trap when user failed to log in after authentication flag disabled. Combo copper ports cannot forward packets after reload with 10 full duplex. Upgrade...

M4200 Firmware Version 12.0.2.6 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) New Features and Enhancements: Enabled igmp snooping/mld snooping and fast-leave on vlan 1. Enhanced the firmware upgrade naming to avoid confusion. Increased voice VLAN table to 384. Changed the default setting for the logging console and logging buffered. Changed default IP address on OOB to 192.168.0.239/24 and management VLAN to 169.254.100.100/16. Support loop protection on GUI. Logs the status of firmware/config upgrade to logged buffer. Display...

M4200 Firmware Version 12.0.0.15 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes Fixed the issue where the packets might be dropped if DAC cable is used in fiber ports. Limitations M4200 does not support 100M Half Duplex. M4200 doesn't support IPv6 tunnel and lookback interface. Upgrade procedure Save the current configuration data. Normally the firmware will preserve the original configuration in the switch, however, just in case something went wrong during the upgrade, you may want to save a copy of current running con...

M4200 Firmware Version 12.0.2.10 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes: The 10G fiber port fails to come up with Intel SFP+ at 10G speed. The 10G fiber port fails to come up with QSFP+ cable. Unable to disable LACP per port on GUI. In some cases, switch doesn’t transmit LLDP MED packets for Voice VLAN. Known issues: Loop Protect functionality does not work if igmpsnooping is enabled. Upgrade procedure Save the current configuration data. Normally the firmware will preserve the original configuration in the swit...

M4200 Firmware Version 12.0.2.9 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) New Features and Enhancements: Increased MAC based VLAN to 512. 10G PHY firmware upgraded to 2.11.9 to support IEEE 802.3bz 2.5G/5GBASE-T Bug Fixes: STP BPDU is not transmitted through DVLAN tunnel. The description is incorrect for ingress filtering on GUI help page. Dot1x unauthenticated-vlan command caused long delay to DHCP client. Service disruption after dot1x enabled and failed to authenticate with Microsoft NPS. Known issues: Loop Protect funct...

M4250 Unable to edit default data profile GSM4210PD 8 Port | NETGEAR Communities

I’d like to edit the default data profile so that it gives out ip addresses in the 192.168.0.x range. I think I’m doing it correctly, I hit apply then save...

NETGEAR M4250-10G2XF-PoE++ (GSM4212UX)_lldpcli Command setting issue | NETGEAR Communities

Hello, Thank you for any help or advice in advance.Under M4250 CLI Command Mode to check the status of POE, it always shows the maximum power...

GSM4212UX Not Bridging Layer 2 Frames | NETGEAR Communities

I recently purchased a GSM4212UX PoE++ switch.   The device works fine and seems to bridge most traffic but will not bridge a broadcast layer...

M4100-12G-POE+ (GSM7212P).failed after Update | NETGEAR Communities

Hello community,I have a problem with my switch, M4100-12G-POE+ (GSM7212P).I wanted to update it and loaded the current firmware onto the switch via the web...

GSM4210P Switch recovery | NETGEAR Communities

Hi I am after some help My switch seems to of lost its firmware and sits with just orange power light on (not green) no matter if its just power plugged...

GSM5212P | NETGEAR Communities

I have a GSM5212P running version 10.0.2.26, B1.0.0.5 I do not receive POE power on any ports. When I look at System Info > POE configuration, the fields...

GSM5212P SNMP OID for reading Ouput Voltage and current and pethPsePortAdminEnable.X command | NETGEAR Communities

Hello to the community, I try to read output POE voltage and current from a GSM5212P and a also need to switch on and off a port with...

GSM7212P Firmware upgrade | NETGEAR Communities

Looks like there might be more than one version of this switch, but not sure how to tell what I have. Serial number is 2TH11952F0033 Current firmware is...

GSM5212P spare part | NETGEAR Communities

Trying to order a replacement power supply board for a GSM5212P-v1h1. How do you go about that?

M4200 - Intermittent Incomplete Boot or SFP+ not working on Power Up | NETGEAR Communities

** NOTE - We can't select M4200 from the Associated Products list. ** A customer has been using a M4200-10MG-PoE+ (GSM4210P) for several years....

PoE Measurement Accuracy | NETGEAR Communities

Hi!  I'm looking at using a managed 802.11bt PoE switch (specifically GSM4212UX) and would like to use it to monitor the voltage/current/power delivered...

M4100 Ports 1&2 | NETGEAR Communities

Greetings,  I have recently procured gsm5212p switch and was wondering if it's possible to use the first two ports as regular ports instead of PD...

GSM7252PS Console Access | NETGEAR Communities

I have two GSM7252PS units stacked. I attempted to upgrade firmware, but it failed. Now I am unable to obtain a web management GUI or find a DHCP assigned IP...

GSM7212 switch port failure | NETGEAR Communities

Hi I have GSM7212. One of ethernet ports appears to be broken. When I connect ethernet device to it the light is up, ethernet link is up but device can't get...

Can't Unstack GSM7252PS / GSM7228PS | NETGEAR Communities

I'm having several issues, but they may all be related to stacking...I successfully stacked two GSM7252PS and one GSM7228PS using the front SFP ports and...

GSM7212 config file on a GSM7312? | NETGEAR Communities

hello all,i had a GSM7212 which failed but the replacement i got through the RMA was a GSM7312. I have a copy of the configuration file for my GSM7212 which...

GSM7212 corrupt flash (how to recover) | NETGEAR Communities

I become the following problem on _3_ different GSM7212 switches shortly after another:The switches are running long time without any problem. When saving...

NETGEAR GS108GE AND GSM4230PX - ECCN | NETGEAR Communities

I want to confirm the ECCN for GS108GE AND GSM4230PX. is it 5A991? Or something else like 5A002? I have emailed netgear compliance as listed but no response.

M4300 Stack (GSM4253PB) - Firmware upgrade causing PABX failure ? | NETGEAR Communities

Hi. We have a stack of 4 GSM4253PB switches with firmware version 12.0.11.15 and yesterday we planned an upgrade to version 12.0.19.4, going through the...

Looking for a Mount Kit for GSM4352PS | NETGEAR Communities

I am looking for the correct mount kit for my GSM4352PS. When Netgear replaced my defective device, they sent me a mounting kit of the wrong size. Their...

M4250-10G2XF-PoE+ (GSM4212PX) | AV Line 8x1G PoE+ 240W 2x1G and 2xSFP+ Managed Switch | NETGEAR Support

M4250-10G2XF-PoE+ (GSM4212PX) - AV Line 8x1G PoE+ 240W 2x1G and 2xSFP+ Managed Switch

M4250-10G2F-PoE+ (GSM4212P) | AV Line 8x1G PoE+ 125W 2x1G and 2xSFP Managed Switch | NETGEAR Support

M4250-10G2F-PoE+ (GSM4212P) - AV Line 8x1G PoE+ 125W 2x1G and 2xSFP Managed Switch

M4100-12G-POE+ (GSM7212P) | 12-Port Managed Gigabit Switch | NETGEAR Support

M4100-12G-POE+ (GSM7212P) - 12-Port Managed Gigabit Switch

M4100-D12G-POE+ (GSM5212P) | ProSAFE Gigabit L2+ Managed Switch | NETGEAR Support

M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch

M4250-8G2XF-PoE+ (GSM4210PX) | AV Line 8x1G PoE+ 220W and 2xSFP+ Managed Desktop Switch | NETGEAR Support

M4250-8G2XF-PoE+ (GSM4210PX) - AV Line 8x1G PoE+ 220W and 2xSFP+ Managed Desktop Switch

M4250-9G1F-PoE+ (GSM4210PD) | AV Line 8x1G PoE+ 110W 1x1G and 1xSFP Managed Desktop Switch | NETGEAR Support

M4250-9G1F-PoE+ (GSM4210PD) - AV Line 8x1G PoE+ 110W 1x1G and 1xSFP Managed Desktop Switch

M4200-10MG-PoE+ (GSM4210P) | Multigigabit Managed Switch with 8x2.5G and 2x10G SFP+ Layer 2+ | NETGEAR Support

M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8x2.5G and 2x10G SFP+ Layer 2+

M4250-10G2XF-PoE++ (GSM4212UX) | AV Line 8x1G Utra90 PoE++ 802.3bt 720W 2x1G and 2xSFP+ Managed Switch | NETGEAR Support

M4250-10G2XF-PoE++ (GSM4212UX) - AV Line 8x1G Utra90 PoE++ 802.3bt 720W 2x1G and 2xSFP+ Managed Switch

M4100-12GF (GSM7212F) | ProSAFE Gigabit L2+ Managed Switch | NETGEAR Support

M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch

M4100-D12G (GSM5212v1h1) | 10-port GE + 2 GE Combo L2 Managed PD Switch | NETGEAR Support

M4100-D12G (GSM5212v1h1) - 10-port GE + 2 GE Combo L2 Managed PD Switch

M5300-52G-POE+ (GSM7252PSv1h2) | ProSAFE 48+4 L2+ POE Stackable Managed Switch | NETGEAR Support

M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch

M4250-40G8XF-PoE+ (GSM4248PX) | AV Line 40x1G PoE+ 960W and 8xSFP+ Managed Switch | NETGEAR Support

M4250-40G8XF-PoE+ (GSM4248PX) - AV Line 40x1G PoE+ 960W and 8xSFP+ Managed Switch

M4250-40G8F-PoE+ (GSM4248P) | AV Line 40x1G PoE+ 480W and 8xSFP Managed Switch | NETGEAR Support

M4250-40G8F-PoE+ (GSM4248P) - AV Line 40x1G PoE+ 480W and 8xSFP Managed Switch

M4250-26G4XF-PoE+ (GSM4230PX) | AV Line 24x1G PoE 480W 2x1G and 4xSFP+ Managed Switch | NETGEAR Support

M4250-26G4XF-PoE+ (GSM4230PX) - AV Line 24x1G PoE 480W 2x1G and 4xSFP+ Managed Switch

M4250-26G4F-PoE+ (GSM4230P) | AV Line 24x1G PoE+ 300W 2x1G and 4xSFP Managed Switch | NETGEAR Support

M4250-26G4F-PoE+ (GSM4230P) - AV Line 24x1G PoE+ 300W 2x1G and 4xSFP Managed Switch

M4300-52G-PoE+ (GSM4352PA) | 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU) | NETGEAR Support

M4300-52G-PoE+ (GSM4352PA) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU)

M4300-52G-PoE+ (GSM4352PB) | 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1,000W PSU) | NETGEAR Support

M4300-52G-PoE+ (GSM4352PB) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1,000W PSU)

Netgear AV Line M4250 Series - NETGEAR Hub

Netgear AV Line M4250 series switches are the perfect solution for your AV needs. Contact NETGEAR for the best deals and support.

NETGEAR at InfoComm 2023: Revolutionizing AV Solutions

Discover how the Muxlab and NETGEAR M4250 AV solution can revolutionize your business operations. Learn about the features and benefits of this powerful combination.Get a glimpse of NETGEAR's presence at InfoComm 2023. Learn about our innovative AV solutions and how they can transform your business operations.

Best Switches for NDI Network Video Streaming AV-over-IP

Stream AV over IP with switches from NETGEAR. Get the best deals on top-quality hardware and elevate your setup today.

Unmatched audio for world-famous stadium Eden Park - NETGEAR Blog

Learn how the Netgear Hub delivers unmatched audio solutions for Eden Park Stadium. Visit now to optimise your network with high-performance technology!

ProDVX and NETGEAR Announce Strategic Partnership - NETGEAR Blog

ProDVX and NETGEAR are partnering to support POE solutions for Panels assuring a stable and seamless solution.

NETGEAR's Dual Band WiFi 6: Redefining Connectivity

Discover how NETGEAR's Dual Band WiFi 6 is redefining connectivity, offering faster speeds, increased capacity, and improved efficiency.

Samsung Transforms AV Training with NETGEAR Solutions - NETGEAR Blog

Samsung SHRDI boosts its AV infrastructure with NETGEAR switches, delivering low-latency, scalable, and future-ready training environments.

NETGEAR's Professional AV Switch: Powering AV Over IP Solutions

Discover NETGEAR's Professional AV Switch, designed to power AV over IP solutions with efficiency, reliability, and unparalleled performance.

Tri-band WiFi 6E Access Point - Enhancing Wireless Networks

Learn about the Tri-band WiFi 6E Access Point and how it's enhancing wireless networks. NETGEAR offers cutting-edge solutions for your connectivity needs.

NETGEAR EARNS TEN RED DOT AWARDS FOR PRODUCT DESIGN - NETGEAR Blog

Each year, the Red Dot Award for product design is awarded to the world’s best products. According to the organization, products that are selected by the Red Dot Jury may be aesthetically appealing, functional, smart or innovative but, above all, they epitomize outstanding design. This year, we submitted 12 products for consideration and the jury honored ten,

Streamlining Networks with NETGEAR Solutions for Global Firm

HVS tackled complex AV networking challenges with advanced solutions from Netgear improving connectivity & efficiency. Learn how their system evolved today!

TAA Compliant Network Switches

We’re proud to announce TAA compliant switches comprised of several models of our award-winning M4250 and new M4350 switch series.

Enhancing Legislative Broadcasts: NETGEAR's AV Solutions for South Korea's National Assembly

Discover how the National Assembly Steering Committee in South Korea improved their legislative broadcasts with NETGEAR AV switches. Learn about the benefits of enhanced network stability, seamless AV device compatibility, and streamlined configuration for efficient meeting room broadcasts.

Theatres, Philharmonics, Cultural Centres NETGEAR Blog

The Police Cultural Center was upgraded with Harman AV technology for superior sound, control, and flexibility.

Immersive Media Art in Thailand - NETGEAR Blog

Discover how KP Art Center in Pattaya, Thailand created a 4,300-square-meter immersive media art exhibition powered by NETGEAR AV over IP.

Tokyo Broadcasting System's R&D base

Tech Design X, Tokyo Broadcasting System’s R&Dbase, takes full advantage of NETGEAR’s AV over IPswitches to create content for the future.