Search results for: GSM4210P

M4200 Firmware Version 12.0.2.6 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) New Features and Enhancements: Enabled igmp snooping/mld snooping and fast-leave on vlan 1. Enhanced the firmware upgrade naming to avoid confusion. Increased voice VLAN table to 384. Changed the default setting for the logging console and logging buffered. Changed default IP address on OOB to 192.168.0.239/24 and management VLAN to 169.254.100.100/16. Support loop protection on GUI. Logs the status of firmware/config upgrade to logged buffer. Display...

M4200 Firmware Version 12.0.2.36 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) New Features and Enhancements: Compliant with California Privacy Law: Force user to change the default password on first login to the device. In the web GUI “LAG Configuration” page, replace "Active Ports" field with “Down Ports” for each LAG group to easily spot the offline member port Bug Fixes: PoE task is running even though PoE is disabled Vulnerability alert: Linux DOS issue Management interface gets stuck in manual assignment if DHCP lease expi...

M4200 Firmware Version 12.0.2.10 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes: The 10G fiber port fails to come up with Intel SFP+ at 10G speed. The 10G fiber port fails to come up with QSFP+ cable. Unable to disable LACP per port on GUI. In some cases, switch doesn’t transmit LLDP MED packets for Voice VLAN. Known issues: Loop Protect functionality does not work if igmpsnooping is enabled. Upgrade procedure Save the current configuration data. Normally the firmware will preserve the original configuration in the swit...

M4200 Firmware Version 12.0.2.20 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes: Packet loss/ Connection drops due to "Timeout to CPU" and "Out of memory" errors. M4300-12X12F (XSM4324S) - device rebooted itself without any reason, customer wants to know the root cause. DUT will lose PBR configuration and hung-up when execute 'clear arp-cache' command on console port. M4300-28G crashed with Task Name=lldpTask. Switch reboots randomly when routing VLAN is flapping. XSM4348S -Netbridge-1G SFP down when the master switch c...

M4200 Firmware Version 12.0.2.9 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) New Features and Enhancements: Increased MAC based VLAN to 512. 10G PHY firmware upgraded to 2.11.9 to support IEEE 802.3bz 2.5G/5GBASE-T Bug Fixes: STP BPDU is not transmitted through DVLAN tunnel. The description is incorrect for ingress filtering on GUI help page. Dot1x unauthenticated-vlan command caused long delay to DHCP client. Service disruption after dot1x enabled and failed to authenticate with Microsoft NPS. Known issues: Loop Protect funct...

M4200 Firmware Version 12.0.0.19 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes Client takes about 1min to get an IP address from DHCP server after moving to init-reboot state. The switch is not using the configured radius source interface while sending the radius packets. Unable to disable LACP mode on ports of Switching>Ports>Port Configuration pages. The password for RADIUS account server changed, after renaming the RADIUS account server's name through GUI. Route table shows incorrect information in Configure Routes ...

M4200 Firmware Version 12.0.2.17 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes: LLDP local management address is different with system MAC address. Known issues: Loop Protect functionality does not work if igmpsnooping is enabled. Upgrade procedure Save the current configuration data. Normally the firmware will preserve the original configuration in the switch, however, just in case something went wrong during the upgrade, you may want to save a copy of current running configuration. To do so, go to ‘Maintenance->Uploa...

M4200 Firmware Version 12.0.2.15 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes: The fiber port can Up when Insert some fiber module without cable. After stack(AXC761 used) reload hosts on secondary switch fail to access management interface(via SSH or https). M4300 supports AXM765 on 12.0.2.14. Mikrotik RoMON services not passing through M4300 switches. Fiber ports link down when there are 4 fiber modules in the same port block. 'show stats group port-utilization' should display utilization percentage(%) format. Switch...

M4200 Firmware Version 12.0.0.15 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes Fixed the issue where the packets might be dropped if DAC cable is used in fiber ports. Limitations M4200 does not support 100M Half Duplex. M4200 doesn't support IPv6 tunnel and lookback interface. Upgrade procedure Save the current configuration data. Normally the firmware will preserve the original configuration in the switch, however, just in case something went wrong during the upgrade, you may want to save a copy of current running con...

M4200 Firmware Version 12.0.2.26 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes: Unable to reset 'switch priority' and 'unit number' using 'erase stack-config' DUT should forwarding BPDU packet with VLAN tag when the port 802.1Q VLAN tag setting Switch won't let you bind more than 15 ACL Captive portal: When authenticate the client by dot1x and captive portal ,it gets an error "05 Method Not Allowed" Add two ACL show commands in techsupport file. Switch reboot randomly when there is only one port in the VLAN 1. Link Dep...

M4200 Firmware Version 12.0.2.12 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes: Root Unauthenticated Remote Code Execute via DevShell "logging email" feature does not send an email via SMTP. Known issues: Loop Protect functionality does not work if igmpsnooping is enabled. Upgrade procedure Save the current configuration data. Normally the firmware will preserve the original configuration in the switch, however, just in case something went wrong during the upgrade, you may want to save a copy of current running configu...

M4250 Firmware Version 13.0.5.24 - NETGEAR Support

Release Date: February 12, 2026 This firmware supports the GSM4210PD, GSM4210PX, GSM4212P, GSM4212PX, GSM4212UX, MSM4214X, and XSM4216F models. Enhancements: The AV UI provides the following enhancements: Support for the Default profile with IGMP Plus enabled. Updated the Data profile to disable IGMP. Updated the Audio Basalte Multiroom profile to disable IGMP and MLD snooping. Updated the Audio Dante profile to remove storm-control for broadcast traffic. Updated the Lighting profile to remove s...

M4250 Firmware Version 13.0.5.26 - NETGEAR Support

Release Date: April 29, 2026 This firmware supports the GSM4210PD, GSM4210PX, GSM4212P, GSM4212PX, GSM4212UX, MSM4214X, and XSM4216F models. Enhancements: The AV UI provides the following enhancements: Support for new AJA AV Network profile. Support for new Audio Video AVB MILAN profile. Support for new Audio Video AVB MILAN with Dante PTPv1 PTPv2 or AES67 profile. Support for new AUDAC Audio and Control Network profile. Support for new BluOS AV profile. Support for Color Palettes to the profile...

M4250 Firmware Version 13.0.5.20 - NETGEAR Support

Release Date: October 23, 2025 This firmware supports the GSM4210PD, GSM4210PX, GSM4212P, GSM4212PX, GSM4212UX, MSM4214X, and XSM4216F models. Enhancements: The AV UI provides the following enhancements: Support for new profiles: Visionary Advanced Multi-Domain G&D KVM-over-IP Poly StudioNet Modular Room URC Automation Avid S6L Updated the default web browser protocol to HTTPS Added interface descriptions that specify the VLAN ID, the profile name and the profile template Updated AV profile desc...

M4200 Firmware Version 12.0.0.12 (Initial Release) - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Limitations M4200 does not support 100M Half Duplex. M4200 doesn't support IPv6 tunnel and lookback interface. Upgrade procedure Save the current configuration data. Normally the firmware will preserve the original configuration in the switch, however, just in case something went wrong during the upgrade, you may want to save a copy of current running configuration. To do so, go to 'Maintenance->Upload' page, and select Text Configuration option and c...

NETGEAR Engage Controller Supported Devices - NETGEAR Support

The Engage Controller supports the following device models: Pro Routers: PR460X WiFi Access Points: WBE718, WBE758, WAX608Y Fully Managed Switches: M4250 series: Model SKU M4250-8G2XF-PoE+ GSM4210PX M4250-9G1F-PoE+ GSM4210PD M4250-10G2F-PoE+ GSM4212P M4250-10G2XF-PoE+ GSM4212PX M4250-10G2XF-PoE++ GSM4212UX M4250-12M2XF MSM4214X M4250-16XF XSM4216F M4250-26G4F-PoE+ GSM4230P M4250-26G4F-PoE++ GSM4230UP M4250-26G4XF-PoE+ GSM4230PX M4250-40G8F-PoE+ GSM4248P M4250-40G8XF-PoE+ GSM4248PX M4250-40G8XF-P...

M4250 Firmware Version 13.0.5.10 - NETGEAR Support

Enhancements: The AV UI provides the following enhancements: Added new profiles: Allen & Heath gigaACE/GX, Audio Genelec Smart IP, AVoIP Lightware AV network, Blustream Multicast, Unite Audio, and Poly StudioNet Modular Room Switch (GSM4210PD only). Added the Add-Ports-Untagged-To-Profile menu on the Network Profiles page: Use this menu to add ports to existing profiles by selecting the ports on the switch panel and selecting a profile from the menu. Added the configured system name to the switc...

NETGEAR AV Line of Fully Managed Switches M4250 Series - NETGEAR Support

NETGEAR AV Line of Fully Managed Switches M4250 SeriesThe following table lists the port and PoE configurations for the 8-port M4250 series of fully managed switches:ModelSKUPoE Ports 1GBASE-T RJ-45Non-PoE Ports 1GBASE-T RJ-45Fiber PortsPoE BudgetM4250-9G1F-PoE+GSM4210PD8 x PoE+ (802.3at) 11 x 1G SFP110WM4250-8G2XF-PoE+GSM4210PX8 x PoE+ (802.3at) 2 x 10G SFP+ 220WM4250-10G2F-PoE+GSM4212P8 x PoE+ (802.3at) 2 2 x 1G SFP125WM4250-10G2XF-PoE+GSM4212PX8 x PoE+ (802.3at) 2 2 x 10G SFP+ 240WM4250-10G2X...

M4500-32C / M4500-48XF8C Firmware Version 7.0.4.18 - NETGEAR Support

Features and Enhancements: This firmware provides the following features and enhancements: Enables L3 routing in the default configuration The AV UI provides the following enhancements: On the Network Profiles page, new profile templates are added: Allen & Heath gigaACE/GX Audio Genelec Smart IP AVoIP Lightware AV network Blustream Multicast Unite Audio Model M4250-9G1F-PoE+ (GSM4210PD) only: Poly StudioNet Modular Room Switch On the Network Profiles page, the “Add-Ports-Untagged-To-Profile” men...

Security Advisory for Unauthenticated Remote Code Execution on M4200 and M4300, PSV-2017-1971 - NETGEAR Support

NETGEAR is aware of a security vulnerability that can allow an unauthenticated attacker to execute commands with administrator privileges through the web interface of the M4300 family of fully managed switches and one model in the M4200 family of fully managed switches. This could allow an attacker to take over the switch, gain access to configuration files, or disrupt operation of the switch. This vulnerability only occurs when an attacker is able to access the web interface of the switch. For ...

M4250 Unable to edit default data profile GSM4210PD 8 Port | NETGEAR Communities

I’d like to edit the default data profile so that it gives out ip addresses in the 192.168.0.x range. I think I’m doing it correctly, I hit apply then save...

GSM4210P Switch recovery | NETGEAR Communities

Hi I am after some help My switch seems to of lost its firmware and sits with just orange power light on (not green) no matter if its just power plugged...

M4200 - Intermittent Incomplete Boot or SFP+ not working on Power Up | NETGEAR Communities

** NOTE - We can't select M4200 from the Associated Products list. ** A customer has been using a M4200-10MG-PoE+ (GSM4210P) for several years....

NETGEAR GS108GE AND GSM4230PX - ECCN | NETGEAR Communities

I want to confirm the ECCN for GS108GE AND GSM4230PX. is it 5A991? Or something else like 5A002? I have emailed netgear compliance as listed but no response.

Netgear AV-line Switch "connection refused. Please try again later" | NETGEAR Communities

Hi there, I've configurated my GSM4230P AV-Line Switch with the web browser. Worked fine as always. Also, gave it a new IP address. After that, changed...

M4300 Stack (GSM4253PB) - Firmware upgrade causing PABX failure ? | NETGEAR Communities

Hi. We have a stack of 4 GSM4253PB switches with firmware version 12.0.11.15 and yesterday we planned an upgrade to version 12.0.19.4, going through the...

NETGEAR M4250-10G2XF-PoE++ (GSM4212UX)_lldpcli Command setting issue | NETGEAR Communities

Hello, Thank you for any help or advice in advance.Under M4250 CLI Command Mode to check the status of POE, it always shows the maximum power...

GSM4212UX Not Bridging Layer 2 Frames | NETGEAR Communities

I recently purchased a GSM4212UX PoE++ switch.   The device works fine and seems to bridge most traffic but will not bridge a broadcast layer...

M4100-12G-POE+ (GSM7212P).failed after Update | NETGEAR Communities

Hello community,I have a problem with my switch, M4100-12G-POE+ (GSM7212P).I wanted to update it and loaded the current firmware onto the switch via the web...

GSM5212P | NETGEAR Communities

I have a GSM5212P running version 10.0.2.26, B1.0.0.5 I do not receive POE power on any ports. When I look at System Info > POE configuration, the fields...

GSM5212P SNMP OID for reading Ouput Voltage and current and pethPsePortAdminEnable.X command | NETGEAR Communities

Hello to the community, I try to read output POE voltage and current from a GSM5212P and a also need to switch on and off a port with...

GSM7212P Firmware upgrade | NETGEAR Communities

Looks like there might be more than one version of this switch, but not sure how to tell what I have. Serial number is 2TH11952F0033 Current firmware is...

GSM5212P spare part | NETGEAR Communities

Trying to order a replacement power supply board for a GSM5212P-v1h1. How do you go about that?

PoE Measurement Accuracy | NETGEAR Communities

Hi!  I'm looking at using a managed 802.11bt PoE switch (specifically GSM4212UX) and would like to use it to monitor the voltage/current/power delivered...

M4100 Ports 1&2 | NETGEAR Communities

Greetings,  I have recently procured gsm5212p switch and was wondering if it's possible to use the first two ports as regular ports instead of PD...

M4250-8G2XF-PoE+ (GSM4210PX) | AV Line 8x1G PoE+ 220W and 2xSFP+ Managed Desktop Switch | NETGEAR Support

M4250-8G2XF-PoE+ (GSM4210PX) - AV Line 8x1G PoE+ 220W and 2xSFP+ Managed Desktop Switch

M4250-9G1F-PoE+ (GSM4210PD) | AV Line 8x1G PoE+ 110W 1x1G and 1xSFP Managed Desktop Switch | NETGEAR Support

M4250-9G1F-PoE+ (GSM4210PD) - AV Line 8x1G PoE+ 110W 1x1G and 1xSFP Managed Desktop Switch

M4200-10MG-PoE+ (GSM4210P) | Multigigabit Managed Switch with 8x2.5G and 2x10G SFP+ Layer 2+ | NETGEAR Support

M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8x2.5G and 2x10G SFP+ Layer 2+

M4250-26G4XF-PoE+ (GSM4230PX) | AV Line 24x1G PoE 480W 2x1G and 4xSFP+ Managed Switch | NETGEAR Support

M4250-26G4XF-PoE+ (GSM4230PX) - AV Line 24x1G PoE 480W 2x1G and 4xSFP+ Managed Switch

M4250-26G4F-PoE+ (GSM4230P) | AV Line 24x1G PoE+ 300W 2x1G and 4xSFP Managed Switch | NETGEAR Support

M4250-26G4F-PoE+ (GSM4230P) - AV Line 24x1G PoE+ 300W 2x1G and 4xSFP Managed Switch

M4250-10G2XF-PoE+ (GSM4212PX) | AV Line 8x1G PoE+ 240W 2x1G and 2xSFP+ Managed Switch | NETGEAR Support

M4250-10G2XF-PoE+ (GSM4212PX) - AV Line 8x1G PoE+ 240W 2x1G and 2xSFP+ Managed Switch

M4250-10G2F-PoE+ (GSM4212P) | AV Line 8x1G PoE+ 125W 2x1G and 2xSFP Managed Switch | NETGEAR Support

M4250-10G2F-PoE+ (GSM4212P) - AV Line 8x1G PoE+ 125W 2x1G and 2xSFP Managed Switch

M4100-12G-POE+ (GSM7212P) | 12-Port Managed Gigabit Switch | NETGEAR Support

M4100-12G-POE+ (GSM7212P) - 12-Port Managed Gigabit Switch

M4100-D12G-POE+ (GSM5212P) | ProSAFE Gigabit L2+ Managed Switch | NETGEAR Support

M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch

M4250-40G8XF-PoE+ (GSM4248PX) | AV Line 40x1G PoE+ 960W and 8xSFP+ Managed Switch | NETGEAR Support

M4250-40G8XF-PoE+ (GSM4248PX) - AV Line 40x1G PoE+ 960W and 8xSFP+ Managed Switch

M4250-40G8F-PoE+ (GSM4248P) | AV Line 40x1G PoE+ 480W and 8xSFP Managed Switch | NETGEAR Support

M4250-40G8F-PoE+ (GSM4248P) - AV Line 40x1G PoE+ 480W and 8xSFP Managed Switch

M4250-10G2XF-PoE++ (GSM4212UX) | AV Line 8x1G Utra90 PoE++ 802.3bt 720W 2x1G and 2xSFP+ Managed Switch | NETGEAR Support

M4250-10G2XF-PoE++ (GSM4212UX) - AV Line 8x1G Utra90 PoE++ 802.3bt 720W 2x1G and 2xSFP+ Managed Switch

M4250-26G4F-PoE++ (GSM4230UP) | AV Line 24x1G Ultra90 PoE++ 802.3bt 1,440W 2x1G and 4xSFP Managed Switch | NETGEAR Support

M4250-26G4F-PoE++ (GSM4230UP) - AV Line 24x1G Ultra90 PoE++ 802.3bt 1,440W 2x1G and 4xSFP Managed Switch

M4100-D10-POE (FSM5210Pv1h1) | 8-port FE + 2 GE Combo L2 Managed PoE Switch | NETGEAR Support

M4100-D10-POE (FSM5210Pv1h1) - 8-port FE + 2 GE Combo L2 Managed PoE Switch

NETGEAR's Dual Band WiFi 6: Redefining Connectivity

Discover how NETGEAR's Dual Band WiFi 6 is redefining connectivity, offering faster speeds, increased capacity, and improved efficiency.

ProDVX and NETGEAR Announce Strategic Partnership - NETGEAR Blog

ProDVX and NETGEAR are partnering to support POE solutions for Panels assuring a stable and seamless solution.

Samsung Transforms AV Training with NETGEAR Solutions - NETGEAR Blog

Samsung SHRDI boosts its AV infrastructure with NETGEAR switches, delivering low-latency, scalable, and future-ready training environments.

NETGEAR's Professional AV Switch: Powering AV Over IP Solutions

Discover NETGEAR's Professional AV Switch, designed to power AV over IP solutions with efficiency, reliability, and unparalleled performance.

Tri-band WiFi 6E Access Point - Enhancing Wireless Networks

Learn about the Tri-band WiFi 6E Access Point and how it's enhancing wireless networks. NETGEAR offers cutting-edge solutions for your connectivity needs.

NETGEAR EARNS TEN RED DOT AWARDS FOR PRODUCT DESIGN - NETGEAR Blog

Each year, the Red Dot Award for product design is awarded to the world’s best products. According to the organization, products that are selected by the Red Dot Jury may be aesthetically appealing, functional, smart or innovative but, above all, they epitomize outstanding design. This year, we submitted 12 products for consideration and the jury honored ten,

Netgear AV Line M4250 Series - NETGEAR Hub

Netgear AV Line M4250 series switches are the perfect solution for your AV needs. Contact NETGEAR for the best deals and support.

NETGEAR at InfoComm 2023: Revolutionizing AV Solutions

Discover how the Muxlab and NETGEAR M4250 AV solution can revolutionize your business operations. Learn about the features and benefits of this powerful combination.Get a glimpse of NETGEAR's presence at InfoComm 2023. Learn about our innovative AV solutions and how they can transform your business operations.

TAA Compliant Network Switches

We’re proud to announce TAA compliant switches comprised of several models of our award-winning M4250 and new M4350 switch series.

Enhancing Legislative Broadcasts: NETGEAR's AV Solutions for South Korea's National Assembly

Discover how the National Assembly Steering Committee in South Korea improved their legislative broadcasts with NETGEAR AV switches. Learn about the benefits of enhanced network stability, seamless AV device compatibility, and streamlined configuration for efficient meeting room broadcasts.

Immersive Media Art in Thailand - NETGEAR Blog

Discover how KP Art Center in Pattaya, Thailand created a 4,300-square-meter immersive media art exhibition powered by NETGEAR AV over IP.

Best Switches for NDI Network Video Streaming AV-over-IP

Stream AV over IP with switches from NETGEAR. Get the best deals on top-quality hardware and elevate your setup today.

Unmatched audio for world-famous stadium Eden Park - NETGEAR Blog

Learn how the Netgear Hub delivers unmatched audio solutions for Eden Park Stadium. Visit now to optimise your network with high-performance technology!

Theatres, Philharmonics, Cultural Centres NETGEAR Blog

The Police Cultural Center was upgraded with Harman AV technology for superior sound, control, and flexibility.

Tokyo Broadcasting System's R&D base

Tech Design X, Tokyo Broadcasting System’s R&Dbase, takes full advantage of NETGEAR’s AV over IPswitches to create content for the future.