Search results for: PR60X

PR60X Firmware Version 2.2.0.46 - NETGEAR Support

Enhancements: VLAN ID 4094 is now supported on LAN ports. Adds a sorting option to the DHCP leases page. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes the issue where an IPsec tunnel in a PPPoE configuration reports as connected but you cannot ping devices over the tunnel. Fixes the issue where gateway validation is not working after editing static route rules. ...

PR60X Firmware Version 2.5.0.66 - NETGEAR Support

New Feature and Enhancements: Support for WireGuard VPN: WireGuard is a modern VPN solution designed for simplicity, security and performance. Simplicity: VPN connection is made simply by exchanging public keys. Security: WireGuard uses modern cryptography and is easy to audit for security vulnerability owing to its code simplicity. High performance: WireGuard runs in kernel space and high-performance crypto algorithms. Support for SFP+ Rx Compensation control in Port Settings. Bug Fixes: Fixes ...

PR60X Firmware Version 2.3.0.78 - NETGEAR Support

Maximum number of supported VLANs increased from 8 to 32 Maximum number of concurrent firewall connections increased from 60,000 to 250,000 NAT loopback is supported on both the same VLAN and across different VLANs IPSec profile supports up to 10 different encryption algorithms for Phase 1 and Phase 2 options IPSec client-to-site VPN tunnels are now supported: A single VPN tunnel configuration is supported. However, this single configuration allows up to 60 VPN users to connect securely over VPN...

PR60X Firmware Version 2.6.0.80 - NETGEAR Support

New Feature and Enhancements: Multiple WAN IP feature The Multiple WAN IP address feature allows different LAN services to bind to different WAN IP addresses. The following features support the Multiple WAN IP feature: Outbound NAT rules VPN Port forwarding IPSec site-to-site enhancements: Multiple VLAN support UI enhancements for easier use Dual WAN Rule enhancement: User-configured dual WAN rules take priority over the default failover rule. This allows you to better manage services for differ...

PR60X Firmware Version 2.7.0.111 - NETGEAR Support

New Features and Enhancements: This firmware addresses the following new features and enhancements which are available in the device UI only. Insight currently does not support these new features and enhancements. Support for Dual WAN Load Balancing. This feature allows the simultaneous use of two separate Wide Area Network (WAN) connections to ensure uninterrupted connectivity and optimal utilization of available bandwidth.The router uses dual WAN load balancing to: Reduce delays due to sharing...

PR60X Firmware Version 2.0.1.43 - NETGEAR Support

New Feature: Support for port settings (EEE, flow control, and speed) on WAN and LAN interfaces Features: NETGEAR® Insight Managed 1-year NETGEAR Insight subscription for remote cloud-based management 2.5 Gbps primary WAN port Three 2.5 Gbps LAN ports (LAN1, LAN2, LAN3) One 10 Gbps LAN/WAN Port (LAN5 WAN2), the default function is LAN port LAN5 port can be converted to second WAN port (WAN2) through the UI 10 Gbps SFP+ LAN4 port Up to 2000 clients supported Eight VLANs supported with an IPv4 DHC...

PR60X Firmware Version 2.4.0.100 - NETGEAR Support

New Feature and Enhancements: Support for OpenVPN: OpenVPN is a virtual private network (VPN) system that lets you set up secure point-to-point connections for routed or bridged configurations and remote access locations. OpenVPN client devices, such as laptops (Windows, MacOS) and smart phones (iOS, Android), can connect to a company network or remote server over OpenVPN with TUN or TAP mode to access the network resources and their services in a secure manner. A TUN-style network provides laye...

PR60X Firmware Version 2.4.0.104 - NETGEAR Support

New Feature and Enhancements: Support for OpenVPN: OpenVPN is a virtual private network (VPN) system that lets you set up secure point-to-point connections for routed or bridged configurations and remote access locations. OpenVPN client devices, such as laptops (Windows, MacOS) and smart phones (iOS, Android), can connect to a company network or remote server over OpenVPN with TUN or TAP mode to access the network resources and their services in a secure manner. A TUN-style network provides laye...

PR60X Firmware Version 2.1.0.75 - NETGEAR Support

New Features and Enhancements: Added support for Dynamic DNS Added support for mDNS Gateway Added support for QoS - Smart Queue Management Added support for LLDP Added an option to allow remote device management under the IPSec Site-to-Site option Added a default IKEv2 IPSec profile Added a Delete button on the DHCP Leases page Added a VLAN status widget on the Dashboard Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit h...

PR60X Firmware Version 3.0.0.105 - NETGEAR Support

Release Date: May 1, 2026 New Features and Enhancements: Firmware version 3.0.0.105 is the first firmware release for the PR60X to integrate SASE (Secure Access Service Edge) security capabilities powered by the Exium cloud platform. Enabling SASE security on the router provisions two categories of features: capabilities that run directly on the router, and capabilities that become accessible via the Exium cloud portal. Note: Enabling SASE security activates multiple security services on the rou...

Why does my PR60X/PR460X SFP+ not link up at 10G when I use long DAC cables? - NETGEAR Support

This article describes how to establish a 10G link on a NETGEAR PR60X / PR460X SFP+ port with longer DAC cables. This article applies to: PR60X - 10G/Multi-Gigabit Dual WAN Pro Router with Insight Cloud Management. PR460X - 10G/Multi-Gigabit Dual WAN Pro Router with Insight Cloud Management. Some longer DAC cables, such as 3-meter AXC763, have a weaker signal at the receiver. The Pro Router SFP+ port might not establish a link with these cables at a 10G speed. Alternatively, you can use 1-meter ...

How do I restore my PR60X configuration settings? - NETGEAR Support

If you backed up the configuration file, you can restore the configuration settings from this file. To restore configuration settings that you backed up: Launch a web browser from a computer or mobile device that is connected to the router network. Enter https://www.routerlogin.net. Your browser might display a security message, which you can ignore. A login window opens. Enter the router user name and password. The user name is admin. The password is the one that you specified when you set up y...

How do I install my PR60X router using the router web interface? - NETGEAR Support

To install your NETGEAR router using the router web interface: Using an Ethernet cable, connect your modem to the yellow Internet port on the back of your NETGEAR router. Connect your computer to one of the Ethernet ports on your router. Insert the Power Cable into the router. The LEDs on the router light. Open a web browser and enter https://www.routerlogin.net. You are prompted to log in. Your browser might display a security message, which you can ignore Note: If you experience any Internet c...

How do I power cycle or reboot my PR60X router? - NETGEAR Support

If you are experiencing problems with your NETGEAR router, you might want to reboot it. Sometimes a reboot is all that’s needed to resolve basic connectivity issues. All of your router settings are saved when you reboot your router. To power cycle or reboot your PR60X router with the power cable: Remove the power cable located on the back of the unit. Wait 30 seconds. Power on your router by re-inserting the power cable. To power cycle or reboot your PR60X router with the local interface: Launch...

How do I enable Dual WAN on my NETGEAR PR60X? - NETGEAR Support

The PR60X allows you to enable the LAN5 port to become a secondary WAN port. This can create a fail over WAN interface in the event that the WAN 1 port loses connection to the internet. A secondary internet service provider is required to fully utilize the secondary WAN port. To enable the secondary WAN port: Launch a web browser from a computer or mobile device that is connected to your router’s network. Enter https://www.routerlogin.net. Your browser might display a security message, which you...

How do I enable NAT loopback on my PR60X or PR460X? - NETGEAR Support

NAT loopback is enabled by default on PR60X and PR460X. There is no option to enable or disable the feature. Last Updated:07/07/2025 | Article ID: 000066031 Was this article helpful? Yes No

How do I reserve an IP address on my PR60X router? - NETGEAR Support

When you reserve an IP address for a device on your local area network (LAN), that device is always assigned the same IP address each time it accesses the router’s DHCP server. You might want to assign reserved IP addresses to computers or servers that need permanent IP settings to work correctly. You can reserve IP addresses from your router’s web interface. To reserve an IP address on your NETGEAR router: Launch a web browser from a computer or mobile device that is connected to your router’s ...

How do I manually update the firmware on my PR60X router? - NETGEAR Support

NETGEAR regularly releases firmware updates to improve product performance, add features, and enhance security. If you want to load a specific firmware version, follow these instructions. To manually update the firmware on your PR60X router: Connect your computer to your router with an Ethernet cable. Visit NETGEAR Support. Enter your router’s Model Number or Product Name. Click Downloads. Select a firmware version and click Download. Unzip the file if needed. Enter https://www.routerlogin.net i...

How do I add a custom port forwarding service on my PR60X router? - NETGEAR Support

By default, the firewall of your NETGEAR router blocks all incoming connection attempts by devices on the Internet to devices in your local network. If you want devices on the Internet to connect to devices on your local network, you can set up your router with port forwarding rules to do so. For more information, see What is port forwarding? The router uses port forwarding rules to forward incoming traffic with specific protocols to devices on your local network. For example, you might want to ...

How do I set up one or more VLANs between a NETGEAR PR60X Pro Router and a Smart Switch with a traditional UI? - NETGEAR Support

To separate guest and production networks, you can segment a network and create two Layer 3 networks. In this way, you achieve complete separation between both networks, while each network can have full access to the Internet. When you create VLANs, be sure to use numbers and names that clearly identify each VLAN and its purpose. The scenario described in this example is as follows: Existing default VLAN 1: 192.168.1.0/255.255.255.0 Example VLAN 5 as Guest: 192.168.5.1/255.255.255.0 LAN 11 port ...

Introducing NETGEAR PR60X Pro Router: Next-Gen Speed

Discover the PR60X Pro Router by NETGEAR. Experience blazing-fast speeds, enhanced security, and seamless connectivity for all your devices. Learn more!

NETGEAR SMART SWITCH - MS108TUP - NETGEAR Blog

NETGEAR launches MS108TUP smart switch to boost SMB connectivity.

GS108MX Switch Unveiled: Modern Business Connectivity

NETGEAR is launching its latest unmanaged switch, the GS108MX, featuring one 10G/Multi-Gigabit Ethernet port for non-blocking uplink.

Introducing GS108X 8-Port Gigabit Switch w/SFP+ 10Gb Uplink - NETGEAR Blog

Meeting the needs of scaling businesses, NETGEAR is launching its latest unmanaged switch – the GS108X, featuring a 10G SFP+ port for non-blocking uplink over longer distances.

Cloud Manageable Smart Switch - NETGEAR Blog

The cloud-managed NETGEAR S3600 Series Smart Switches, join the company’s line of switches designed to meet the growing demands for faster networking that today’s businesses require.

How to Build AI or ML Farms - Without Breaking the Bank

The cluster is where things can get either really expensive or limit AI performance – or both. Let’s run through the typical hardware components used and determine where you can optimize for the best performance vs cost ratio.

NETGEAR Launches New WiFi 7 Access Point

NETGEAR introduces the WBE710 access point, the newest addition to its WiFi 7 business access point lineup.

Pressroom

Welcome to NETGEAR PRESSROOM. Here you can download our latest news, images and videos. All content can be used rights-free for editorial purposes.

Introducing: NETGEAR for Business - Discover More

NETGEAR is kicking off 2024 with a renewed focus on business solutions. To better reflect our offerings, which are scalable for businesses running out of home or satellite offices to multi-campus enterprises, we have officially repositioned the SMB division of NETGEAR as NETGEAR for Business.

Go faster with 2.5Gb Ethernet - NETGEAR Blog

Multi Gig Ethernet: Upgrade your network with Netgear's advanced 2.5Gb 5Gb and 10Gb tech. Experience lightning-fast speeds and better performance.

NETGEAR at CEDIA 2023 - PR460X Pro Router & More - NETGEAR Blog

NETGEAR Launches PR460X with Insight Remote Cloud Management to Deliver a Total Network Solution for Residential Installations

WLEX Lexington Transforms Live Production with NETGEAR AV Switches - NETGEAR Blog

WLEX modernizes mobile broadcast production with NETGEAR’s AV Line, cutting setup time, boosting reliability, and enabling seamless remote workflows

What’s new for ISE 2024 from NETGEAR AV?

Integrated Systems Europe (ISE) 2024 takes place in Barcelona from January 30- February 2 and the NETGEAR team will be on hand to demonstrate the latest products and services for your AV network infrastructure.

AV over IP Technical Guides

Explore and download our ProAV tech guides and procedure documentation to quickly install and configure NETGEAR AV products and solutions.

NETGEAR Engage 2.0 - NETGEAR Blog

NETGEAR introduces Engage 2.0: AV Network Management made simple. Upgrade your existing controller now!

NETGEAR at InfoComm 2023: AV Solutions for Business

Join NETGEAR at InfoComm 2023 to explore cutting-edge AV solutions tailored for businesses. Discover products that elevate your audiovisual experience.

NETGEAR at InfoComm Asia 2024 - NETGEAR Blog

At InfoComm Asia 2024 (booth L10) the NETGEAR AV team will showcase a major innovation, the M4350 series of fully managed AV switches.

Broadcast AV Case Studies - List - NETGEAR Blog

Explore how NETGEAR Business has helped organizations complete AV projects with our quality network solutions

Business Case Studies - Real-World NETGEAR Solutions

Explore NETGEAR's business case studies showcasing innovative solutions for IT and AV challenges. See how we empower organisations to succeed.

The Ultimate AV Product Reference Guide for AV Engineers - NETGEAR Blog

AV engineers: simplify your 220V installations with the NETGEAR AV Product Reference Guide. Download now for easy product selection.