Search results for: GS724TPP

GS724TPv2 / GS724TPP Firmware Version 2.0.8.9 - NETGEAR Support

Enhancements: Upgrade OpenSSL to version 1.1.20 Add TLS 1.2/1.3 support Support SSH access control session New Features: Add Secure Diagnostic Mode (SDM) to allow NETGEAR Support to establish a secured connection for remote troubleshooting. This is disabled by default. Add Secure Shell (SSH) server for remote login. This is enabled by default. Lite command-line interface (CLI). To find the Lite CLI Reference Manual, visit https://www.netgear.com/support/, enter your model number in the search bo...

GS724TPv2 / GS724TPP Firmware Version 2.0.6.3 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. Warnings: Read and follow these warnings before updating GS724TPv2 or GS724TPPv1 firmware: After updating the FW to v2.0.6.3, it cannot be downgraded to the previous versions. Updating GS724TPv2 FW from v1.1.1.x to v2.0.6.x: If you are updating GS724TPv2 FW from v1.1.1.x to v2.0.6.x, make sure to follow these instructions carefully. Caution: To successfully update the firmware to v2.0.6.x from v1.1.x.x, you must perform a ser...

GS724TPv2 / GS724TPP Firmware Version 2.0.4.3 - NETGEAR Support

Bug Fixes: Fixes the RADIUS reauthentication configuration where it did not clear after session timeout. Fixes an issue where the packet counter for the CPU port on the Statistics page did not work. Fixes an issue where a client device can fail to get a DHCP IP address when there is another network device connected between the switch and the client device. Security Fixes: Fixes various security vulnerability fixes and enhancements. Warnings: HTTPS is disabled by default since firmware release v1...

GS724TPv3 / GS724TPPv3 Firmware Version 6.2.0.22 - NETGEAR Support

New Features: Supports the management of DHCP snooping and L2 relay through Insight. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The D...

GS724TPv2 / GS724TPP Firmware Version 2.0.8.12 - NETGEAR Support

Bug Fixes: Fixes an issue where you cannot exclude ports from the voice VLAN using the Insight Cloud Portal or Insight app. Warnings and Instructions: Read and follow these instructions before you update to firmware version 2.0.7.4 from an earlier version: After you update the firmware to version 2.0.7.4 or a later version, we recommend that you do not downgrade the firmware to version 2.0.6.x or an earlier version. Because HTTPS is disabled by default since firmware version 1.0.2.2, the device ...

GS724TPv3 / GS724TPPv3 Firmware Version 6.2.0.15 - NETGEAR Support

New Features: New responsive user interface (UI) that can adjust to the size of your screen Auto-Camera VLAN Auto-WiFi VLAN Known Issues: The admin page is not reachable if the switch is in a 192.168.0.0 subnet and obtains an IP other than 192.168.0.239. Workaround: Set a DHCP reservation for the switch so that it obtains the IP address 192.168.0.239. If there are multiple switches, then isolate each switch from the network, access each switch at the default IP address 192.168.0.239 and configur...

GS724TPv3 / GS724TPPv3 Firmware Version 6.2.1.11 - NETGEAR Support

Release Date: July 7, 2025 New Features and Enhancements: Support for the UI Dark Theme Support for HTTP, instead of TFTP, to improve reliability Support for 16 allowed LLDP neighbors per port Increased the maximum supported password length to 64 characters Reduced the query response time when polling SNMP MIB Removed the Diffie-Hellman key exchange algorithms that might pose security concerns. Bug Fixes: Fixes the issue where the IP phone that has LLDP enabled cannot join the voice VLAN. Known ...

GS724TPv3 / GS724TPPv3 Firmware Version 6.2.1.41 - NETGEAR Support

Release Date: July 7, 2026 Bug Fixes: Fixes the issue where the switch becomes unreachable after renewing its DHCP-assigned IP address if the DHCP server is temporarily unavailable during lease renewal. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports might not display. Workaround: Perform a cable test for a single port on the switch through Insight. After you change the IP address of the switch, it might take around 6 minutes to upd...

GS724TPv2 / GS724TPP Firmware Version 2.0.2.4 - NETGEAR Support

New Features and Enhancements: Increase the resolution for the Storm Control > Threshold setting from 10Mbit to 1Mbit to support finer-grained values (for example, you can set 5.1). Bug Fixes: Added support for Insight PoE Schedule feature when the configured schedule crosses midnight EAP packets get dropped when IGMP or MLD Snooping is enabled, which resulted in authentication failure of connected supplicant Returns wrong SNMP ifIndex of switch management port Warning: Read and follow the warni...

GS724TPv2 / GS724TPP Firmware Version 2.0.8.11 - NETGEAR Support

Bug Fixes: Fixes an interoperability issue with Hikvision camera, model DS-2CD2146G2-ISUI. It may not get PoE power from the switch. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 2.0.7.4: We recommend against downgrading the firmware image to 2.0.6.X or earlier version after updating to 2.0.7.4 or later versions. Because HTTPS has been disabled by default since v1.0.2.2, the device UI Home page does not display automatically after using HTTPS to upgr...

GS724TPv2 / GS724TPP Firmware Version 2.0.3.2 - NETGEAR Support

New Features and Enhancements: Adds ping and traceroute network administrative functions to the Troubleshooting page in the Insight Web Portal and app. Security Fixes: Fixes security vulnerabilities. This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes the issue where the DNS host configuration doesn’t accept an IPv6 address. Fixes the issue where the PoE schedule for weekly recurrenc...

GS724TPv2 / GS724TPP Firmware Version 2.0.8.17 - NETGEAR Support

Enhancements: Upgrade OpenSSL to version 3.1. Bug Fixes: Fixes an issue that the system may freeze when accessing device migrates frequently from port to port. For example, wireless client roaming from one wireless AP to another AP that are connected to different ports on the same switch. Warnings and Instructions: Read and follow these instructions before you update to firmware version 2.0.7.4 from an earlier version: After you update the firmware to version 2.0.7.4 or a later version, we recom...

GS724TPv2 / GS724TPP Firmware Version 2.0.1.2 - NETGEAR Support

NOTE: This new firmware release requires product registration to unlock full access to the local browser UI. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. New Features and Enhancements: Faster application of multiple port configuration settings through the Insight Cloud Portal and the Insight app. Bug Fixes: Port now sends properly formed IGMP queries after booting up with non-default VLAN (VLAN 1). Switch connectivity is no longer lost when ...

GS724TPv2 / GS724TPP Firmware Version 2.0.7.4 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Bug Fixes: Unable to update SSL certificate via TFTP and HTTPS if logged in via HTTPS. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 2.0.7.4: We recommend against downgrading the firmware image to 2.0.6.X or earlier version after updating to 2.0.7.4 or later versions. Because HTTPS has been disabled by de...

GS724TPv3 / GS724TPPv3 Firmware Version 6.2.1.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS724TPv2 / GS724TPP Firmware Version 2.0.2.8 - NETGEAR Support

New Features and Enhancements: Starting from firmware version 2.0.2.6, product registration is required to unlock full access to the local browser UI. You can login and access all features through the local browser UI 3 times without registering the switch through your netgear.com account. A limited feature set is available without registration. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. Introduced an option to enable/disable switch discov...

GS724TPv2 / GS724TPP Firmware Version 2.0.8.20 - NETGEAR Support

Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings and Instructions: Read and follow these instructions before you update to firmware version 2.0.7.4 from an earlier version: Configuration files are not compatible between firmware version 1.x.x.x and version 2.x.x.x. After you update the firmware to version 2.0.7.4 or a later version, we recommend that you do not downgrade t...

GS724TPv3 / GS724TPPv3 Firmware Version 6.2.0.25 - NETGEAR Support

New features: Support Protected Port feature through Insight cloud management. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.netgear.com/files/GDC/GS724TPPv3/GS724TPv3_GS724TPPv3_firm...

GS724TPv2 / GS724TPP Firmware Version 2.0.8.18 - NETGEAR Support

Enhancements: Support MSchapv2 for RADIUS authentication Bug Fixes: Fixes the issue where you might not be able to access the device UI after the switch’s IP address is changed or renewed multiple times. Fixes the issue where the device UI might become inaccessible when the IP address is changed. Fixes the issue where you cannot configure IPv6 addresses in the range of unique local addresses (fc00::/7). Fixes the issue that the EAP Success packets still flood after receiving EAPOL start packets....

GS724TPv2 / GS724TPP Firmware Version 2.0.6.1 - NETGEAR Support

Bug Fixes: Fixes an issue where SNMP service hangs when the MAC table is fully populated and SNMP walk is executed continuously. Fixes an issue that turning off both HTTP and HTTPS at the same time causes the device UI to become inaccessible. Fixes an issue that causes a brief pause in protocol packet forwarding to the CPU when the rate exceeds 150 packets per second. Warnings: Read and follow these warnings before updating any firmware version prior to 2.0.0.XX: Updating GS724TPv2 FW from v1.1....

GS724TPPv3 (FW v6.1.0.10) PoE MIBs error | NETGEAR Communities

Hi,I'm trying to check/enable/disable PoE on switch ports via SNMP. The problem is that I'm using MIBs for firmware version 6.2.1.12 but my switch has...

GS724TPPV3 possibly blocking VRRP on my mobility express primary election port 112 | NETGEAR Communities

we have just started replacing our older switches and immediatly have started a new problem.   We have Cisco AP's using the Mobility express and as...

Fixed IP dropping for GS724TPP | NETGEAR Communities

I am baffled.Every now and then, the fixed IP assigned to this switch "drops" as in, is no longer assigned.The switch is still working, devices connected to...

GS724TPP - fan's always disabled | NETGEAR Communities

Hi community, I have bought a GS724TPP switch for my home network. No high traffic which goes over the switch, one POE-device (display) is...

How to Update POE-firmware on GS724TPP | NETGEAR Communities

I have a "GS724TPP: 24-Port Gigabit Hi-Power PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management" device running firmware...

GS724TPP Failed Audit due to Lighttpd Version | NETGEAR Communities

Routine audit showed our Netgear is running a version of Lighttpd that is affected by CVE-2014-2323, CVE-2014-2324. The audit wants verison 1.4.35 or later...

GS724TPP and AP issue | NETGEAR Communities

I have two EnGenius EWS377AP's connected to the GS724TPP switch using POE 802.3at. I am using VLAN's, but not a management VLAN and no issues there. I...

Vlan config | NETGEAR Communities

Using a netgear GS724TPP to try and understand networking a little better. boot version1.0.0.12Software vession2.0.8.5 So I was able to hook this...

Connect two Switches | NETGEAR Communities

Hello,I have a GS724tpp switch that is working great. On one of the runs I have a small dumb hub that connects 3 devices to the network. When this connection...

"Timeout expired, please login again. Window will be closed" message when trying to access GS724TP. | NETGEAR Communities

Hi, I use a GS724TP switch for my home network which has 17 devices connected. To easy up network management I created a HTML page with a clickable map...

GSM7328SV2 not able to uplink to GS724TPS | NETGEAR Communities

there is a GSM7328SV2 connected to GS724TPS The GSM7328SV2 is not able to ping to the GS724TPSreset to factory defaults the GSM7328SV2 and updated the...

GS724TP VLAN Issues | NETGEAR Communities

I just added a GS724TP to my network, it is showing the latest firmware 5.0.0.15 with the Boot Version of 1.0.0.5. This switch was added to utilize the POE...

How to reset GS724TP to Factory??? | NETGEAR Communities

Come on guys you REALLY need to get on the ball with your manuals. Show me where in the manual or any "Guide" how to reset this switch to Factory Defaults...

Gs724tp | NETGEAR Communities

The unit only has devices plugged into ports 1 thru 8 but shows other ports as connected in the Device View. I can not configure any of the ports at this...

2 vlans GS748T to 2 vlans GS724TP lock nwrk conns | NETGEAR Communities

I don’t post too often but just recently bought some new hardware that is not playing well sssooo. Reviewing forum post did not readily find a similar...

VLAN and Trunk Port on GS724TP | NETGEAR Communities

I am trying to configure a couple of GS724TPs with multiple VLANs and trunk ports. I have been able to figure out the VLANs and currently have The following...

Netear GS724TPS - Vlans | NETGEAR Communities

Morning,I am having a bit fo a mare here. I have already replaced one of these switches and wonder if this one is kaput too. The new one is the 100EUS...

GS724TPv3 The switch loses IP connection about 1 time in 5 days. | NETGEAR Communities

Hi, I have Netgear switch GS724TPv3, newest firmware installed The switch loses IP connection about 1 x every 5 days. I don't know...

Does GS728TPPv2 have a limit on number of mac addresses in a mac address-based VLAN? | NETGEAR Communities

I'm looking for a switch with POE and mac address-based VLAN capabilities and came across the GS728TPPv2. I want to put my smart home devices in a...

Issue with PoE Interface on GS728TPPv2 | NETGEAR Communities

Hello everyone, I'm experiencing a persistent issue with the PoE interface on my NETGEAR GS728TPPv2 switch.The interface seems to be constantly loading...

GS728TPS(B) | 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports | NETGEAR Support

GS728TPS(B) - 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports

S3300-28X-PoE+ (GS728TXP) | 28-Port Gigabit Ethernet Stackable Smart Switch with 24 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-28X-PoE+ (GS728TXP) - 28-Port Gigabit Ethernet Stackable Smart Switch with 24 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff

TKTEI's Network Success with NETGEAR's solutions

TKTEI improved network efficiency with NETGEAR solutions, reducing costs and downtime. Highly recommended for reliability and ease of use.

NETGEAR Unveils GS724Tv6 & GS748Tv6: Future-Proof Smart Switches

Discover NETGEAR's latest smart switches, GS724Tv6 and GS748Tv6, designed for efficient, future-ready network management in growing businesses.

DC Montessori School Chandigarh - Case Study - NETGEAR Blog

DCM School Chandigarh has upgraded its network with NETGEAR Business, improving speed, reliability, and security for staff and students.

Cuisine Schmidt IT Solutions - Simplify Business Processes

Schmidt cuisine enables their advisors to present new kitchen designs using tablets to provide its customers an excellent buying experience.

New MS305E and MS308E Multi-Gig Switches - NETGEAR Blog

NETGEAR has launched the multi-gig five port MS305E and multi-gig eight-port MS308E switches as a lightly smart managed upgrade to their unmanaged predecessors.

Introducing the NETGEAR S350 Series v2: Powerful PoE+ Smart Switches - NETGEAR Blog

The NETGEAR S350 Series v2 Gigabit PoE+ Smart Managed Essentials Switches are designed to give growing organizations enterprise-grade capabilities - without the complexity or cost that usually comes with them.

COEP's Technological University builds on its heritage of excellence with world-class campus-wide networking - NETGEAR Blog

COEPS Technological University builds on its heritage of excellence with world-class campus-wide networking

IT Supervision Solutions - Enhance Network Management

Partnering for reliable, high-speed, and secure connectivity based on the NETGEAR Total Network Solution

Business IT Networking Articles - NETGEAR Blog

Discover how to get the most out of your business IT network with the latest technology and best practices. Learn More.