Search results for: GS748

GS748Tv6 Firmware Version 7.0.0.12 - NETGEAR Support

Enhancements: The NETGEAR Switch Discovery Protocol (NSDP) that is used by NETGEAR Switch Discovery Tool (NSDT) for PCs is removed. Known Issues: When an Ethernet cable encounters a problem and you run a cable test to identify the cause of the issue, it detects the issue but does not report the reason for the test failure correctly. Warnings: Read and follow these warnings before updating your firmware: Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the device as it is no longer...

GS748Tv4 Firmware Version 5.4.1.11 - NETGEAR Support

GS748Tv4h1 is the first hardware version of latest 48 port Gigabit smart switch with 2 combo ports and 2 dedicated Gigabit SFP ports. GS748Tv4h2 is NETGEAR's new hardware version of GS748Tv4. Compared to the first version GS748Tv4h1, below new features are added. New Features: EEE (IEEE802.3az) IPv4 Static Route. IPv6 ACL and QoS. This SW release 5.4.1.x can both run on GS748Tv4h1 and GS748Tv4h2. And note that EEE (IEEE802.3az) feature can only work on GS748Tv4h2. GS748Tv4 supports the latest Sm...

GS748T V1H1, V1H2 & V1H3 Firmware Version 2.0.2_02 - NETGEAR Support

New Features: Storm Control TOS and DSCP to be additional options of QoS Modification and bugs Fixed: Fixed the bug that when a port is configured in forced mode, the port cannot be linked up to a PC with a cross-over cable.(already fixed on V2.0.1_01) Fixed the bug that the configuration of IEEE802.1Q VLAN could not be retained after reboot if more than one VLAN group exists. (already fixed on V2.0.1_01) Fixed the bug that '128.0.0.x' was treated as invalid IP addresses. (already fixed on V2.0....

GS748Tv4 Firmware Version 5.4.2.13 - NETGEAR Support

GS748Tv4h1 is the first hardware version of latest 48 port Gigabit smart switch with 2 combo ports and 2 dedicated Gigabit SFP ports. GS748Tv4h2 is NETGEAR's new hardware version of GS748Tv4. Compared to the first version GS748Tv4h1, below new features are added. EEE (IEEE802.3az) IPv4 Static Route. IPv6 ACL and QoS. Based on previous release 5.4.1.x, SW release 5.4.2.x is maintenance release that fixed some SW issues. It can both run on GS748Tv4h1 and GS748Tv4h2. And note that EEE (IEEE802.3az)...

GS748Tv4 Firmware Version 5.0.2.28 - NETGEAR Support

New Features: The feature of product registration is added. Fixed Issues: Fixed - Unit crashes when performing Configuration Backup through NMS200. After running for some time, random port down, can't communicate to internet until rebooting. LLDP Port Id should be unique in GS748Tv4. VLAN setting changed after reboot when voice vlan is enabled. Known Issues: Sometimes for some type of SFP, fiber connects two switches, shutdown one side, other side still links up. When set Minimum Bandwidth as 10...

GS748Tv1 Firmware Version 1.3.0 - NETGEAR Support

Only for GS748Tv1h1 - Do NOT use this on v1h2 or v1h3. Note: If you have firmware version 1.0.0, you must first upgrade to firmware version 1.1.0 before attempt upgrade to version 1.3.0. After upgraded to version 1.3.0, you must reset the switch to factory default by using the Factory Default button on the switch or by clicking Factory Reset on the Web GUI. Write down all the configuration you have changed. Use them to manually reconfigure the switch after upgrade. Enhancements from v1.3.0-0606:...

GS748Tv4 Firmware Version 5.4.2.18 - NETGEAR Support

GS748Tv4h1 is the first hardware version of latest 48 port Gigabit smart switch with 2 combo ports and 2 dedicated Gigabit SFP ports. GS748Tv4h2 is NETGEAR's new hardware version of GS748Tv4. Compared to the first version GS748Tv4h1, below new features are added. EEE (IEEE802.3az) IPv4 Static Route. IPv6 ACL and QoS. Based on previous release 5.4.1.x, SW release 5.4.2.x is maintenance release that fixed some SW issues. It can both run on GS748Tv4h1 and GS748Tv4h2. And note that EEE (IEEE802.3az)...

GS748Tv6 Firmware Version 7.0.0.14 - NETGEAR Support

Bug Fixes: Fixes the issue where the uplink ports might be reported incorrectly to the Insight Cloud Server. Known Issues: When an Ethernet cable encounters a problem and you run a cable test to identify the cause of the issue, it detects the issue but does not report the reason for the test failure correctly. Warnings: Read and follow these warnings before updating your firmware: Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the device as it is no longer supported from firmwar...

GS748Tv4 Firmware Version 5.0.2.33 - NETGEAR Support

GS748Tv4 is the latest 48 port Gigabit smart switch with 2 combo ports and 2 dedicated Gigabit SFP ports. It also supports the latest Smart Control Center, please use SCC version 1.1.1.14 with GS748Tv4 for discovery, basic configuration and FW upgrades. Fixed Issues: Wont boot up properly /power lights never comes on. DUT cannot ping for destinations outside of local network. Customer can't login GUI after the switch is running for some time. GUI fails to load after SIP phone use on the switch. ...

GS748Tv4 Firmware Version 5.4.1.17 - NETGEAR Support

GS748Tv4h1 is the first hardware version of latest 48 port Gigabit smart switch with 2 combo ports and 2 dedicated Gigabit SFP ports. GS748Tv4h2 is NETGEAR's new hardware version of GS748Tv4. Compared to the first version GS748Tv4h1, below new features are added. EEE (IEEE802.3az) IPv4 Static Route. IPv6 ACL and QoS. This SW release 5.4.1.x can both run on GS748Tv4h1 and GS748Tv4h2. And note that EEE (IEEE802.3az) feature can only work on GS748Tv4h2. GS748Tv4 supports the latest Smart Control Ce...

GS748Tv4 Firmware Version 5.4.2.27 - NETGEAR Support

GS748Tv4h1 is the first hardware version of latest 48 ports Gigabit smart switch with 2 combo ports and 2 dedicated Gigabit SFP ports. GS748Tv4h2 is Netgear’s new hardware version of GS748Tv4. Compared to the first version GS748Tv4h1, below new features are added. EEE (IEEE802.3az) IPv4 Static Route IPv6 ACL and QoS. Based on previous release 5.4.1.x, SW release 5.4.2.x is maintenance release that fixed some SW issues. It can both run on GS748Tv4h1 and GS748Tv4h2. And note that EEE (IEEE802.3az)...

GS748Tv4 Firmware Version 5.4.2.30 - NETGEAR Support

GS748Tv4h1 is the first hardware version of latest 48 ports Gigabit smart switch with 2 combo ports and 2 dedicated Gigabit SFP ports. GS748Tv4h2 is Netgear’s new hardware version of GS748Tv4. Compared to the first version GS748Tv4h1, below new features are added. EEE (IEEE802.3az) IPv4 Static Route IPv6 ACL and QoS. Based on previous release 5.4.1.x, SW release 5.4.2.x is maintenance release that fixed some SW issues. It can both run on GS748Tv4h1 and GS748Tv4h2. And note that EEE (IEEE802.3az)...

GS748Tv6 Firmware Version 7.0.0.10 - NETGEAR Support

New Features and Enhancements: This is the initial release of this firmware. Known Issues: When an Ethernet cable has a problem, running a cable test can detect the issue but might not report the reason for the test failure correctly. Download Link: https://www.downloads.netgear.com/files/GDC/GS748Tv6/GS748Tv6-V7.0.0.10.zip Firmware Update Instructions: The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating. To update yo...

GS724TP, GS748TP Switch Firmware Version 5.2.0.9 - NETGEAR Support

Bug Fixes: Fixed the problem that log information sent to remote server does not include the source IP address. Fixed the problem that LED Mode button on the front panel does not work. Limitations: Although Management VLAN can now be changed from VLAN 1 to any other valid VLAN, egress packets still cannot be tagged with VLAN ID of 1. Known Issues: When configuring IP ACL rule, system does not reject source address to be multicast address and accepts 0.0.0.0 masking. Workaround: None. It will be ...

GS724TPS, GS748TPS, GS724TS and GS748TS Firmware Version 5.1.0.2 - NETGEAR Support

Bug Fixes: Fixed the issue with the POE configuration being lost after reboot. Firmware Download 4.31 MB Upgrading procedure Warning: Improper upgrade procedure may cause the device to become inoperable and it will need to be replaced. Device firmware cannot be downgraded to version V3.x.x.x once it has been upgraded to V5.x.x.x. Devices (GS700TS series) installed with firmware version V1.x.x.x must first be upgraded to version V3.x.x.x before attempting to upgrade them to V5.x.x.x. The boot cod...

GS724TPS, GS748TPS, GS724TS and GS748TS Firmware Version 5.2.0.8 - NETGEAR Support

GS724TS/GS748TS/GS724TPS/GS748TPS V5.2.0.8 New Feature and Enhancement: Support IE9. Increase the maximum number of entries in the multicast group table (Switching > Multicast > Adavanced > Multicast Group Membership) from 32 to 48. Bug Fixes: Fixed the problem that log information sent to remote server does not include the source IP address. Fixed the problem of failing 802.1X port-based authentication if the device is connected to the secondary unit of a stack. . Limitations: For troubleshooti...

GS724TPS, GS748TPS, GS724TS and GS748TS Firmware Version 5.2.0.9 - NETGEAR Support

GS724TS/GS748TS/GS724TPS/GS748TPS V5.2.0.9 New Feature and Enhancement: None. Bug Fixes: Fixed the problem that the behavior of LED Mode button on the front panel (GS724TPS and GS748TPS) is incorrect. Limitations: For troubleshooting (Maintenance > Troubleshooting), the switch supports "Cable Test" & "Remote Diagnostics" but not "Ping" & "Traceroute". Upgrading procedure Warning: Improper upgrade procedure may cause the device to become inoperable and it will need to be replaced. Device firmware...

GS724TPS, GS748TPS, GS724TS and GS748TS Firmware Version 5.2.0.10 - NETGEAR Support

New Feature and Enhancement: None. Bug Fixes: Fixed the problem that using Google Chrome browser with special cookies to login to a switch by its host name, the switch will reboot when the GUI idle timeout time has reached. Fixed the problem that syslog format is not conforming to RFC-3164 standard. Limitations: For troubleshooting (Maintenance > Troubleshooting), the switch supports "Cable Test" & "Remote Diagnostics" but not "Ping" & "Traceroute". Upgrading procedure Warning: Improper upgrade ...

GS724TPS, GS748TPS, GS724TS and GS748TS Firmware Version 5.2.0.11 - NETGEAR Support

Bug Fixes: Fixed the problem that the switch will reboot when try to select LAG in Switching > STP > Advanced > MST Port Configuration page. Fixed the problem that user cannot login to the switch after changing password containing special character like “&”. Fixed the problem that switch cannot discover Cisco-3850x switch through LLDP. Fixed the problem that no matter which fan is not working, the syslog always displays “FAN# 1 status changed – not operational”. Limitations: For troubleshooting ...

GS724TP, GS748TP Switch Firmware Version 5.2.0.10 - NETGEAR Support

Bug Fixes: Fixed the problem that using Google Chrome browser with special cookies to login to a switch by its host name, the switch will reboot when the GUI idle timeout time has reached. Fixed the problem that syslog format is not conforming to RFC-3164 standard. Fixed the problem of not able to download configuration file. Limitations: Although Management VLAN can now be changed from VLAN 1 to any other valid VLAN, egress packets still cannot be tagged with VLAN ID of 1. For troubleshooting (...

GSM7352S and GS748TS Unit Modes? | NETGEAR Communities

We just installed a GSM7352S in our data room and replaced a unmanaged switch with a GS748TS on the 3rd floor of our office building. Is it the best to setup...

ethernet leds are amber netgear prosafe GS748T | NETGEAR Communities

Hi, I hope somebody help me. We have a switch netgear ProSafe GS748T, and suddenly, the leds that indicates if any port is occupied are amber, even if the...

best option, 2 netgear Prosafe GS724T-400EUS in trunking or 1 gs748teu, | NETGEAR Communities

best option, 2 netgear Prosafe GS724T-400EUS in trunking or 1 gs748teu,  do you have the same performance both options.   2 netgear prosafe 24...

Please help me upgrade the firmware on GS748Tv3 and GS724T | NETGEAR Communities

In a small business environment I have 6 Netgear GS series switches of various ages.  using Netgear Smart Control Center Manager...

Firmware Update Problem Gs748TS | NETGEAR Communities

Hello everybody,I can not run a firmware update because the static IP address can not enter.When I wear these in the form of a 192.168.xxx.xxx, is to apply...

GS748T v4 cross VLAN multicast routing | NETGEAR Communities

I have a ProSafe GS748T v4 L2 Smart Switch. The main reason to get it was it's routing capabilities and Multicast. Where do I find information on how to...

GS748T v5 VLAN problems | NETGEAR Communities

Hi there,I have a Netgear newbie question:I'm trying to get this working:VLAN100 (used for LAN), Untagged Ports 1-24, Tagged Port 48VLAN200 (used for...

GS748TS web interface issue when configuring LAGs | NETGEAR Communities

We have several GS748TS which need reconfiguration of the LAGs, however neither Chrome nor IE 10 (both normal and compatibility mode) appear to allow us to...

Stacked gs748ts firmware upgrade | NETGEAR Communities

Hi !I plan to upgrade the firmware of a pair of stacked GS748ts using V5.0.0.23 at this time to V5.2.0.10.Do I need to unstack them or only to upgrade the...

GS748Tv4 | NETGEAR Communities

I've been shoved into unknown waters with a task that I need to complete.I've been asked to create a VLAN on two GS748Tv4 switches for a new phone system....

GS748Tv4 - Firware upgrade gone bad? | NETGEAR Communities

Hi All,I have a the above switch where I upgraded the firmware from 5.0.2.18 to 5.0.2.28. According to the smart control center tasks, this was successful. ...

GS748TPS Stacking Errors | NETGEAR Communities

I have 4 GS748TPS and 1 GS748TS in a stack, however two of the GS748TPS's seem to cause the stack to have difficulties. It continually reboots the stack and...

GS748TPS Stacking Errors | NETGEAR Communities

I have 4 GS748TPS's and 1 GS748TS in a single stack, however two of the GS748TPS's seem to cause problems when they are in the stack. The whole stack will...

2 vlans GS748T to 2 vlans GS724TP lock nwrk conns | NETGEAR Communities

I don’t post too often but just recently bought some new hardware that is not playing well sssooo. Reviewing forum post did not readily find a similar...

Reset password on GS748TPS? | NETGEAR Communities

Hello All-Have 4 of these switches (2 in each bldg& stacked via HDMI) connected by fiber. I had a 8 char PW set on the switch and decided to change it...

GS748TR save config locally - only TFTP? | NETGEAR Communities

I have an old GS748TR, hardware version 0x3, boot version 1.2.0, and software version 4.0.2.2 that has been running solid for over 10 years. It has now...

Expanding GS748TP Switch into another switch | NETGEAR Communities

Hello, My networking skills are very basic and I am currently stumped with a situation. I have a GS748TP legacy switch (Calling this switch 1) that I am...

Advice on Suitable replacement of Netgear Prosafe GS748TPS Switches | NETGEAR Communities

Evening folks. I have two GS748TPS's in a home environment that have done super work the last 12+ years. But they got water damaged recently and are approved...

GS748v5 6.3.1.47 how to set up vlan | NETGEAR Communities

Hiive been trying to set up a cryptocurrency miner on a vlan.i own a GS748v5running 6.3.1.47no of the instructions ive found match current interface.could...

GS748Tv5 managed switch with a Nest pro wifi | NETGEAR Communities

I have Nest pros with a Netgear GS748Tv5 managed switch. I have turned off stp and turned on forward BPDU. Everything was working fine until a about a month...

GS728TS(B) | 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper/SFP+ and 4 Dedicated SFP+ Ports | NETGEAR Support

GS728TS(B) - 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper/SFP+ and 4 Dedicated SFP+ Ports

S3300-28X (GS728TX) | 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-28X (GS728TX) - 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports

GS728TPS(B) | 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports | NETGEAR Support

GS728TPS(B) - 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports

S3300-28X-PoE+ (GS728TXP) | 28-Port Gigabit Ethernet Stackable Smart Switch with 24 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-28X-PoE+ (GS728TXP) - 28-Port Gigabit Ethernet Stackable Smart Switch with 24 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports

NETGEAR Unveils GS724Tv6 & GS748Tv6: Future-Proof Smart Switches

Discover NETGEAR's latest smart switches, GS724Tv6 and GS748Tv6, designed for efficient, future-ready network management in growing businesses.

New MS305E and MS308E Multi-Gig Switches - NETGEAR Blog

NETGEAR has launched the multi-gig five port MS305E and multi-gig eight-port MS308E switches as a lightly smart managed upgrade to their unmanaged predecessors.

Business IT Networking Articles - NETGEAR Blog

Discover how to get the most out of your business IT network with the latest technology and best practices. Learn More.

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Introducing the NETGEAR S350 Series v2: Powerful PoE+ Smart Switches - NETGEAR Blog

The NETGEAR S350 Series v2 Gigabit PoE+ Smart Managed Essentials Switches are designed to give growing organizations enterprise-grade capabilities - without the complexity or cost that usually comes with them.

DC Montessori School Chandigarh - Case Study - NETGEAR Blog

DCM School Chandigarh has upgraded its network with NETGEAR Business, improving speed, reliability, and security for staff and students.

Cuisine Schmidt IT Solutions - Simplify Business Processes

Schmidt cuisine enables their advisors to present new kitchen designs using tablets to provide its customers an excellent buying experience.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff

Networking solution ensures Hawk-Eye Innovations never misses the mark - NETGEAR Blog

Discover how NETGEAR networking powers Hawk-Eye’s real-time precision and reliability across global sporting events.