Search results for: GS108X

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

GS108Ev3 Firmware Version 2.00.05 - NETGEAR Support

Bug Fixes: Made Flow Control configurable and its default setting is changed from enable to disable. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It could be anywhere from 300 to 600 seconds. IGMP host tim...

GS108Ev3 Firmware Version 2.06.17 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Known Issues: To support the device UI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by device UI, and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It...

GS108Ev3 Firmware Version 2.00.08 - NETGEAR Support

Bug Fixes: Fixed the web GUI counter issue where Bytes Received and Bytes Sent (under System > Monitoring > Port Statistics) gets reset to zero after reaching 4294967295. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 30...

GS108PEv3 Firmware Version 2.06.08 - NETGEAR Support

V2.06.08 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). New Feature: Add a new column to Port Status to display “Max MTU” supported by the device. Modification: Change Web GUI page title from “NETGEAR ProSAFE Plus Switch” to “NETGEAR GS108PEv3” Change production description from “ 8-Port Gigabit ProSAFE PLUS Swit...

GS108PEv3 Firmware Version 2.06.16 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be u...

GS108Tv3 / GS110TPv3 Firmware Version 7.0.0.16 - NETGEAR Support

New Features and Enhancements: Initial Release Known Issues: Netgear account Single Sign On would be redirected to local login page if internet connection is not stable, suggest changing device password to avoid unauthorized login with default password Uploading configuration file through Smart Control Center cannot be turned off, suggest changing device default password to avoid unintended configuration settings being uploaded. Download Link: http://www.downloads.netgear.com/files/GDC/GS108Tv3/...

GS108PEv3 Firmware Version 2.00.12 - NETGEAR Support

New Features and Enhancements: Implemented new and more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). WARNING: After GS108PEv3 are upgraded to FW version V2.00.12 or higher, it cannot work with Plus Utility version prior to V2.4.3. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impac...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.20 - NETGEAR Support

Bug Fixes: Fixes the issue where the device UI might become inaccessible when the IP address is changed. Fixes the issue where you cannot configure IPv6 addresses in the range of unique local addresses (fc00::/7). Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before you update a firmware version that’s earlier than version 7.0.8.4 to vers...

GS108Ev3 Firmware Version 2.06.03 - NETGEAR Support

New features and modifications: V2.06.03 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the postfix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日本語). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). WARNING: After GS108Ev3 are upgraded to FW version V2.06.03 or higher, it cannot work with Plus Utility ve...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.1.25 - NETGEAR Support

IMPORTANT CHANGES NOTE: This new firmware release will require product registration to unlock full access to the local management GUI. To learn the access restriction, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174 New Features and Enhancements: Device auto reclaim support from Insight app and cloud portal Bug Fixes: IGMP snooping is enabled automatically after a reset, regardless of its current setting. Download Link: http://www.downloads.netgear.com/files/GDC/GS10...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.6.3 - NETGEAR Support

Bug Fixes: Fixes the RADIUS reauthentication configuration where it did not clear after session timeout. Fixes an issue where the packet counter for the CPU port on the Statistics page did not work. Fixes an issue where a client device can fail to get a DHCP IP address when there is another network device connected between the switch and the client device. Fixes an issue that GS110TPv3 SFP LED status in Device View is incorrect. Security Fixes: Fixes various security vulnerability fixes and enha...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.5 - NETGEAR Support

New Features: This firmware provides the following new features for GS108Tv3 and GS110TPv3: Add Secure Diagnostic Mode (SDM) to allow NETGEAR Support to establish a secured connection for remote troubleshooting. This is disabled by default. Add Secure Shell (SSH) server for remote login. This is enabled by default. Lite command-line interface (CLI). To find the Lite CLI Reference Manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentatio...

GS108Ev3 Firmware Version 2.06.10 - NETGEAR Support

V2.06.10 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). New Feature: The default admin password must be changed to a unique password after the first login. Modification: Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.7.2 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 7.0.1.XX: Because HTTPS has been disabled by default since v7.0.6.2, the device UI Home page does not display automatically after using HTTPS to update to this firmware version. Open a new web browser tab and type the switch’s IP address to access the Home page. Default community string “Private” and “Public” for SNMPv1/v2 are not avai...

GS108Ev3 Firmware Version 2.06.08 - NETGEAR Support

V2.06.08 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese: The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日本語). New Feature: Add a new column to Port Status to display “Max MTU” supported by the device. Modification: Change Web GUI page title from “NETGEAR ProSAFE Plus Switch” to “NETGEAR GS108Ev3” Change production description from “ 8-Port Gigabit ProSAFE Plus Swit...

GS108Ev3 Firmware Version 2.06.24 - NETGEAR Support

New Features: Can enable and disable the power saving mode (IEEE 802.3az) on the Switch Information page. (In the device UI, select System > Management > Switch Information.) Bug Fixes: Fixes the issue where the settings for the 802.1Q VLAN Advanced function (in the device UI, select VLAN > 802.1Q > Advanced) are missing in the German version. Known Issues: When you access the device UI, all HTTP packets are forwarded to the embedded CPU. If flow control is enabled, the throughput is impacted if...

GS108PEv3 Firmware Version 2.00.07 - NETGEAR Support

Bug Fixes: Fixed the problem where it always displays the test result for port 7 even when a different port is selected for Cable Tester, under System > Monitoring > Cable Tester page. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout...

GS108PEv3 Firmware Version 2.00.05 - NETGEAR Support

Bug Fixes: Made Flow Control configurable and its default setting is changed from enable to disable. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It could be anywhere from 300 to 600 seconds. IGMP host tim...

GS108X Rack Mounting? | NETGEAR Communities

Is it possible to get OEM rack mounting ears for the GS108X?There seems to be screw holes but I can’t find brackets anywhere. I’m not interested in the 3D...

Sanitization Procedures for GS108X and GS116 | NETGEAR Communities

Hello, I am looking for the letter of volatility and sanitization procedures for the GS108X (8-port 1Gb Switch with 10gb SFP+ Uplink GS108X - NETGEAR)...

DC Power connector size for GS108X Unmanaged Switch with 1 dedicated 10G SFP+ Port | NETGEAR Communities

I have a question regarding the power supply for the GS108X Unmanaged Switch, specifically the model that includes the dedicated 10G SFP+ port.Could you...

Web firmware upgrade for GS108Ev3 failing | NETGEAR Communities

I wante to upgrade to version 2.00.05 but don't have a Windows machine handy. So I thought I'd use the web interface. After entering "loader mode" on...

GS108ev3 - Utility stops responding | NETGEAR Communities

Just purhcased a GS108Ev3 switch, and I was able to open up the ProSafe Plus Config utility and select the switch to assign an IP address.  The switch...

GS108Ev3 Firmware Upgrade Issues | NETGEAR Communities

This is still a problem. I bought the GS108E (v3) last week. I couldn't configure the switch using 192.168.0.239 (my PC has a static IP of 192.168.0.200). I...

Issue with connectivity to a NAS connected to GS108T | NETGEAR Communities

I have installed a CTERA C200 NAS on my network with has a TWC Router (ADDIS) and it then feeds to my Netgear GS108T.  The NAS requires the opening of...

Cable Modem > Airport Express > GS108 Switch, but not Cable Modem > GS108 Switch > Airport Express? | NETGEAR Communities

So it appears that my Apple Airport Express router is being a bit of a diva.  I have a Motorola SB6141 Cable modem running into my Apple Airport Express...

GS108Ev3 Cannot set VLAN for management interface | NETGEAR Communities

I just purchased a GS108Ev3 because I needed some simple VLAN segregation for a small group of machines "down the hall" from my core networking equipment....

Weak wifi with Netgear GS108E | NETGEAR Communities

I get a very weak download speed on wifi after I plugged in my Netgear GS108E switch. I have a 100/10 (down/up) Mbit/s fiber connection. Have tried...

GS108 to GS108T but only 100Mbps between them? | NETGEAR Communities

Hi,I have both a GS108 and a GS108T connected together.The GS108 has two PCs connected, both connecting at 1Gbps.The GS108T has 6 100Mbps devices (avr,...

No Gigabit connection GS108Ev3 | NETGEAR Communities

Hi, recently I bought a GS108Ev3 to upgrade my GS105E. The problem is that I can't get a Gigabit connection on my laptop (Asus K52JC with JMicron...

Steam download overloads GS108Ev3 | NETGEAR Communities

Hello everyoneI'm using two GS108Ev3 to connect my devices. I also use 2 STB that provide TV (something like Netflix but from Switzerland). The on STB...

GS108Tv2 Static Mac | NETGEAR Communities

Is it possible to force a port to allow traffic for a specific MAC address and not accept learned MAC addresses?

GS108E-v3 DHCP VLAN | NETGEAR Communities

I recently purchased this switch and was surprised to learn that when in DHCP client mode, it will pull an address from any device on any VLAN.I would have...

GS108E only accessible over default VLAN | NETGEAR Communities

Hello, is it possible to set the IP address of the device on a tagged Vlan instead of the native Vlan?I'd like to manage the Switch from behind a trunk...

GS105E, GS108E, and WG102, all in a VLAN - how? | NETGEAR Communities

I have a GS108E connecting 4 point of sale systems, linking to a GS105E connecting to a point of sale server and WG102 access point with 2 VLAN's on 2...

GS108T empty web configuration page with Firmware Version 5.4.2.9 | NETGEAR Communities

Ok. strange my other post disapeared into nothing...I have GS108T i try to configure with up/download speed limit on the same port. That seems btw to failed,...

Cannot discover GS108T | NETGEAR Communities

HiMy GS108Tv2 switch was working ok. Then I performed a factory reset (because of various problems). I set my local PC address to 192.168.0.1 and I have only...

GS108E FW upgrade OK but no GUI | NETGEAR Communities

Hi,Just upgraded my new GS108E switch and updated the firmware from 1.00.09 to 1.00.12. Upgrade went fine and at 100% the reboot message came. Switch comes...

Introducing GS108X 8-Port Gigabit Switch w/SFP+ 10Gb Uplink - NETGEAR Blog

Meeting the needs of scaling businesses, NETGEAR is launching its latest unmanaged switch – the GS108X, featuring a 10G SFP+ port for non-blocking uplink over longer distances.

GS108MX Switch Unveiled: Modern Business Connectivity

NETGEAR is launching its latest unmanaged switch, the GS108MX, featuring one 10G/Multi-Gigabit Ethernet port for non-blocking uplink.

New MS305E and MS308E Multi-Gig Switches - NETGEAR Blog

NETGEAR has launched the multi-gig five port MS305E and multi-gig eight-port MS308E switches as a lightly smart managed upgrade to their unmanaged predecessors.

Business IT Networking Articles - NETGEAR Blog

Discover how to get the most out of your business IT network with the latest technology and best practices. Learn More.

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Upgrade Your Surveillance With PoE - NETGEAR Hub

Read our blog on upgrading your surveillance with PoE switches. Learn more here.

10 Gig Routers - Find Multi-Gig Home Network Tips

Now is the right time to invest in a future-proofed 10 Gig Router or Multi-Gig Mesh System. Unlock exciting new home networking technology.