Search results for: GS108P

GS108PEv2 Firmware Version 1.00.11 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.24 or newer before upgrading the GS108PEv2 firmware. Older versions of the Plus Utility do not support the password encryption required by V1.00.10 firmware. Bug Fixes: Fixed the issue that device broadcasts loop detection packets periodically even when the feature is disabled. Known Issues: None Limitations: Cable Test is designed to work specifically with Category 5 (CAT-5) cable. Incorrect test resu...

GS108PEv3 Firmware Version 2.06.10 - NETGEAR Support

V2.06.10 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). New Feature: The default admin password must be changed to a unique password after the first login. Modification: Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser...

GS108PEv2 Firmware Version 1.00.10 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.24 or newer before upgrading the GS108PEv2 firmware. Older versions of the Plus Utility do not support the password encryption required by V1.00.10 firmware. New Feature and Enhancement: Make loop detection configurable. Allow the forwarding of ICMP PING packet with size greater than 512 bytes. Add password encryption Bug Fixes: Change the default setting of loop detection from enable to disable. Known...

GS108PEv3 Firmware Version 2.06.03 - NETGEAR Support

New feature and modifications: V2.06.03 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the postfix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日本語). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). WARNING: After GS108PEv3 are upgraded to FW version V2.06.03 or higher, it cannot work with Plus Utility ve...

GS108PEv2 Firmware Version 1.00.12 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.24 or newer before upgrading the GS108PEv2 firmware. Older versions of the Plus Utility do not support the password encryption required by V1.00.10 firmware. Bug Fixes: Fixed the issue that device does not send DHCP request to renew its IP address before DHCP lease expires. Known Issues: None Limitations: Cable Test is designed to work specifically with Category 5 (CAT-5) cable. Incorrect test result m...

GS108PEv3 Firmware Version 2.00.09 - NETGEAR Support

New Features and Enhancements: Added the option to disable/enable Plus Utility Management through Web GUI. Bug Fixes: Fixed the issue that regardless of current setting, port speed is changed to “Auto” (autonegotiation) and flow control is changed to “Enable” after running the cable test on a port. Fixed the security vulnerability issue related to CSRF (Cross-Site request forgery) attacks. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enab...

GS108PEv3 Firmware Version 2.00.12 - NETGEAR Support

New Features and Enhancements: Implemented new and more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). WARNING: After GS108PEv3 are upgraded to FW version V2.00.12 or higher, it cannot work with Plus Utility version prior to V2.4.3. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impac...

GS108PEv3 Firmware Version 2.00.07 - NETGEAR Support

Bug Fixes: Fixed the problem where it always displays the test result for port 7 even when a different port is selected for Cable Tester, under System > Monitoring > Cable Tester page. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout...

GS108PEv2 Firmware Version 1.00.07 - NETGEAR Support

New Feature and Enhancement: None. Bug Fixes: Fix the problem with port-based VLAN where uplink ports (VLAN Group = all) stops forwarding packet to other VLAN members after a power cycle. Known Issues: None Limitations: Cable Test is designed to work specifically with Category 5 (CAT-5) cable. Incorrect test result may be shown if different type of cable is used. The accuracy of the Cable Test is within 5 meters. So, testing with cable shorter than 5 meters may yield incorrect result. When “Bloc...

GS108PEv2 Firmware Version 1.00.06 - NETGEAR Support

New Feature and Enhancement: None. Bug Fixes: Packets with VLAN tag are forwarded out from ports that should have the VLAN tag removed. Packets without VLAN tag are forwarded out from ports that should have the VLAN tag. Known Issues: None Limitations: Cable Test is designed to work specifically with Category 5 (CAT-5) cable. Incorrect test result may be shown if different type of cable is used. The accuracy of the Cable Test is within 5 meters. So, testing with cable shorter than 5 meters may y...

GS108PEv3 Firmware Version 2.06.08 - NETGEAR Support

V2.06.08 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). New Feature: Add a new column to Port Status to display “Max MTU” supported by the device. Modification: Change Web GUI page title from “NETGEAR ProSAFE Plus Switch” to “NETGEAR GS108PEv3” Change production description from “ 8-Port Gigabit ProSAFE PLUS Swit...

GS108PEv3 Firmware Version 2.06.16 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be u...

GS108PEv3 Firmware Version 2.00.05 - NETGEAR Support

Bug Fixes: Made Flow Control configurable and its default setting is changed from enable to disable. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It could be anywhere from 300 to 600 seconds. IGMP host tim...

GS108PEv3 Firmware Version 2.06.24 - NETGEAR Support

New Features: Can enable and disable the power saving mode (IEEE 802.3az) on the Switch Information page. (In the device UI, select System > Management > Switch Information.) Bug Fixes: Fixes the issue where the settings for the 802.1Q VLAN Advanced function (in the device UI, select VLAN > 802.1Q > Advanced) are missing in the German version. Known Issues: When you access the device UI, all HTTP packets are forwarded to the embedded CPU. If flow control is enabled, the throughput is impacted if...

GS108PEv3 Firmware Version 2.00.03 - NETGEAR Support

New Features & Enhancements: Initial Release Limitations: Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It could be anywhere from 300 to 600 seconds. IGMP host timeout is not exactly 260 seconds. It could be anywhere from 260 to 520 seconds. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. Download Link: http://www.downloads.ne...

GS108PEv3 Firmware Version 2.06.14 - NETGEAR Support

V2.06.14 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). Security Fixes: Various security fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration...

GS108PEv3 Firmware Version 2.00.08 - NETGEAR Support

Bug Fixes: Fixed the web GUI counter issue where Bytes Received and Bytes Sent (under System > Monitoring > Port Statistics) gets reset to zero after reaching 4294967295. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 30...

How does the flexible Power over Ethernet (PoE) budget work on my NETGEAR GS108LP, GS108PP, GS116LP, or GS116PP switch? - NETGEAR Support

Your NETGEAR GS108LP, GS108PP, GS116LP, or GS116PP Gigabit Unmanaged Ethernet Switch comes with a single external power adapter. All four models have a built-in power over ethernet (PoE) power selector switch that allows you to connect a different power adapter (sold separately) that can be used to increase or decrease the PoE power available on the switch. If you need a different power budget than what came with the switch, first purchase the optional power adapter for the new PoE power budget ...

Which NETGEAR Smart Managed Plus Switches offer firmware in multiple languages? - NETGEAR Support

The following NETGEAR Smart Managed Plus Switches offer firmware in German and Japanese: GS108Ev3 GS108PEv3 GS116Ev2 GSS116E JGS516PE JGS524Ev2 JGS524PE XS708Ev2 XS716E For more information, see the following knowledge base articles: How can I change my user interface to Japanese or German for my NETGEAR Smart Managed Plus Switch that requires localized firmware? How can I change my user interface to Japanese or German for my NETGEAR Smart Managed Plus Switch that supports multi-language firmwar...

Security Advisory for Sensitive Information Disclosure on Some Switches, PSV-2018-0612 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a sensitive information disclosure security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware version...

poe splitter works with GS108P but not with GS110TP | NETGEAR Communities

I have a (non netgear) POE splitter that work very well with my GS108P.But now I wanted to replace the GS108P with an GS110T, but it does not work. The POE...

Netgear GS108PE - Port blinking without cable, no network connection | NETGEAR Communities

Hello I am using the Netgear GS108PEv3.The switch runs 24/7.The connection of the switch hangs 2-3 times a year.Sometimes only on one port, like just...

Visio Stencil for GS108PEv3 | NETGEAR Communities

Hello,  Do you know where can I get FREE Visio Stencil for 8-port Switch GS108PEv3 model? Thanks in advance,Marco 

Changing MTU Size on a GS108PEv3 | NETGEAR Communities

How do I change the MTU size on a GS108PEv3 managed switch? Neither the web browser nor the ProSafe Plus app allow me to change the MTU size on any of...

Daisy Chain 2 x GS108PP | NETGEAR Communities

Hi there,I'm trying to daisy chain 2 x GS108PP switches I own. I'm using them for larger security camera wiring job.Originally, I had 2 cables coming...

Advice on managing old GS108PEv2 and GS108Ev3 switches? | NETGEAR Communities

My homelab is populated with much older 2nd hand Netgear ProSAFE switches, specifically 2 GS108PEv2 and 3 GS108Ev3.  My understanding is that these need...

GS108PP EOL | NETGEAR Communities

Meine GS108PP sind EOL und es wird keine neue Firmware mehr geben. Gibt es einen Nachfolger, bzw. eine Empfehlung zu einem Nachfolgeprodukt?

GS108PEv3 VLAN compatibility with GS728TPv2 backbone | NETGEAR Communities

I'm in the planning stage of adding VLANs to a network that currently does not have VLANs implemented.  The backbone is two fiber-connected Netgear...

GS108PEv3 Network Name change | NETGEAR Communities

I have a question so I have setup both switches and now the pics that they are connected to are showing ethernet connection 2 and 8. Now does mean that the...

Add computer to GS108PP PoE switch? | NETGEAR Communities

I have my 4 PoE cameras connected to my GS108PP PoE switch.  Can I connect my new Windows desktop computer to the switch?  Will the switch slow...

GS108PEV3 IP address still default on DHCP Network | NETGEAR Communities

This switch connects to a JGS516PE which in turn is connected to the DHCP server in the form of Wi-Fi router provided by the ISP. The 16 port switch gets a...

GS108PEv3 PVID Configuration Missing | NETGEAR Communities

I have a NetGear GS108PEv3 switch that I have been using "wide open" for a while. I recently got myself some VLAN capable hardware and wanted to get things...

Letter of Volatility for GS108PP Switch | NETGEAR Communities

I need a copy of the Letter of Volatility for the GS108PP switch, which is not available in the online documentation. How do I obtain this information?

Fix this in a firmware update for the GS108PEV3? | NETGEAR Communities

When people have originated posts here about not being able to reach the  GS108PEV3 eight-port managed switch with PoE at its assumed IP address, I have...

Can’t reach GS108PEv3 management interface (static IP) | NETGEAR Communities

I have a ProSAFE Gigabit Plus Switch with PoE (GS108PEv3). I followed suggestions to give it a fixed IP address and turn DHCP off. Previously, I had it...

GS108PE vs GS110TP | NETGEAR Communities

What are the differences between the 2 switches that I have listed above?

GS108PE vs GS110TP | NETGEAR Communities

What are the differences between the 2 switches that I have listed above?

GS108PEv3 web GUI not reachable | NETGEAR Communities

I have set up a couple of GS108PEv3 switches on LANs for two different clients. I have configured them through their web GUIs. The problem is that after...

GS108PEv3 issues with management network and tagging vlans. | NETGEAR Communities

I am currently having issues with a newly purchased GS108PEv3 and accessing the management interface while having multiple tagged vlans.. General...

VPN access GS108PEv3 | NETGEAR Communities

Hi!with all newer versions than GS108PEv3_V2.06.10GR, VPN access to the switch isn't possibble.GS108PEv3_V2.06.10GR is the only firmware that works with...

Introducing GS108X 8-Port Gigabit Switch w/SFP+ 10Gb Uplink - NETGEAR Blog

Meeting the needs of scaling businesses, NETGEAR is launching its latest unmanaged switch – the GS108X, featuring a 10G SFP+ port for non-blocking uplink over longer distances.

GS108MX Switch Unveiled: Modern Business Connectivity

NETGEAR is launching its latest unmanaged switch, the GS108MX, featuring one 10G/Multi-Gigabit Ethernet port for non-blocking uplink.

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Upgrade Your Surveillance With PoE - NETGEAR Hub

Read our blog on upgrading your surveillance with PoE switches. Learn more here.

Experience High Performance with NETGEAR's WiFi 6

Experience the future of connectivity with NETGEAR's high-performance WiFi 6, offering faster speeds, increased capacity, and improved efficiency.

New MS305E and MS308E Multi-Gig Switches - NETGEAR Blog

NETGEAR has launched the multi-gig five port MS305E and multi-gig eight-port MS308E switches as a lightly smart managed upgrade to their unmanaged predecessors.

10 Gig Routers - Find Multi-Gig Home Network Tips

Now is the right time to invest in a future-proofed 10 Gig Router or Multi-Gig Mesh System. Unlock exciting new home networking technology.

Cloud Enabled Network Control For Wireless AP - NETGEAR Blog

"Discover the power of cloud-enabled network control for wireless access points (AP) in your business. Netgear's blog explores the benefits, features, and management capabilities of cloud-based solutions to streamline your wireless network operations and enhance connectivity.

Business IT Networking Articles - NETGEAR Blog

Discover how to get the most out of your business IT network with the latest technology and best practices. Learn More.