Search results for: GS724Tv3

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.13 - NETGEAR Support

Bug Fixes: Fixed the issue that if queue ID other than 0 (eg. queue 2) is selected when configuring minimum bandwidth for all ports (QoS > Advanced > Interface Queue Configuration), the minimum bandwidth will be set in queue 0 instead. Fixed the issue that SNMPv3 Engine ID is not unique. Fixed the issue that the switch would lose synchronization with 802.1AS master clock occasionally when EAV is enabled. Fixed the issue that port 15 and 16 of GS724Tv3 would not link up after a reboot if the spee...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.1.10 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. New Features and Enhancements: IPv6 Management. IPv6 ACL. IPv6 QoS. Known issues: None. Notes for IPv6 ACL and QoS: Due to unavailability of hardware resources on GS716T and GS724T, the following are the restrictions for IPv6 ACL and QoS: A rule with all supported qualifiers cannot be bound on the interface. If any ACL has selected qualifier as...

GS716Tv2 / GS724Tv3 Firmware Version 5.4.2.30 - NETGEAR Support

Bug Fixes: Fixed the issue that after deleting SNMP default communities – public and private (System > SNMP > SNMPv1/v2 > Community configuration), both will return after switch reboot. Fixed the issue where the packets with destination MAC address of 01:80:c2:00:00:1c are still flooded out in a looped environment with STP enabled. Fixed the issue where the debugging URL of ‘devshell’ is accessible without authentication. Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configura...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.19 - NETGEAR Support

Bug Fixes: Fixed the issue where the device view (System > Device View) fails to come up after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Limitations: Combined MAC and IP ACL do not work with double VLAN tagged traffic. Using the Download Link below, down...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.1.13 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. Bug Fixes: Remove "1000 Mbps Full Duplex" selection from the drop-down menu for Port Speed (Switching > Ports > Port Configuration) since it is covered by the "Auto" option. Fixed the problem that the MRP (Switching > MRP) and 802.1AS (Switching > 802.1AS) settings are lost after a system reboot. Known issues: There is no LLDP neighbor informat...

GS716Tv2 / GS724Tv3 Firmware Version 5.4.2.27 - NETGEAR Support

Bug Fixes: Fixes the issue where the switch web GUI cannot be accessed after 802.1X port authentication (Security > Port Authentication >Advanced > 802.1X Configuration) is enabled. Addresses the following security vulnerability issues published on CVE web site https://cve.mitre.org/: CVE-2013-4775 CVE-2016-7941 Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically change back to 1 after its associated VLAN is deleted. Workaround: Manually change ...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.10 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. New Features: Add IPv6 management, IPv6 ACL, and IPv6 DiffServ support. Bug Fixes: Fixed the issue that SCCD (Smart Control Center Discovery) Utility cannot discover the device when its DHCP lease time has expired. Fixed the issue that VLAN does not change via RADIUS VLAN assignment unless bring the link down and up. Known issues: Port PVID (Sw...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.9 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. Bug Fixes: Fixed the issue that SCCD (Smart Control Center Discovery) Utility cannot discover the device when its DHCP lease time has expired. Fixed the issue that VLAN does not change via RADIUS VLAN assignment unless bring the link down and up. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatica...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.18 - NETGEAR Support

Bug Fixes: Fixed the issue of switch not able to obtain IP address from some DHCP server. This particular DHCP server requires the source address from the DHCP discovery packet to be 0.0.0.0. Fixed the issue of stronger key (bigger than 2048 bits) can’t be downloaded to the switch. Fixed the issue where switch receives SNTP KISS OF DEATH from SNTP server, switch will no longer contact the SNTP server for time update. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration)...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.25 - NETGEAR Support

Bug Fixes: Fixes the issue where the following optional TLV values of LLDP-MED are incorrect: Optional Mau Type Auto-negotiation advertised capability Maximum Frame size Asset ID Manufacturer name Firmware and Hardware revision Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Limitations: Combined MAC and IP ACL do not work with double VLAN...

MIBs for Smart switches - NETGEAR Support

The following models support complete standard MIBs: FS728Tv2 FS752TP GS108Tv2 GS110TP GS716Tv2 GS724Tv3 GS748Tv4 GS724/48TP GS7xxTS/TPS Additionally, you can find the MIBs for your switch on the http://support.netgear.com page for the switch in question. References: http://www.oidview.com/mibs/detail.html http://www.oidview.com/mibs/4526/md-4526-1.html Further MIB links: GSM73xxSv2 MIBs for Firmware Version 8.0.3.28 (GSM 7228PS, 7252PS, 7328Sv2, 7352Sv2, 7328FS) GSM7224v2, GSM7248v MIBs for Fir...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.0.9 - NETGEAR Support

GS716Tv3, GS724Tv4 and GS748Tv5 are NETGEAR’s hardware refreshed smart switches based on previous old version GS716Tv2/GS724Tv3/GS748Tv4.Below are the new features for GS716Tv3/GS724Tv4/GS748Tv5. Two combo ports on GS716Tv2/24Tv3 are changed to 2 dedicated SFP ports. EAV (Ethernet Audio Video) feature is supported for both GS716Tv3/24Tv4 and GS748Tv5. Multicast VLAN Registration Dynamic ARP Inspection Protocol based VLAN and MAC based VLAN MLD Snooping This release notes contains features and kn...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.4 - NETGEAR Support

The GS716Tv3, GS724Tv4, and GS748Tv5 switches are NETGEAR's hardware-refreshed smart switches based on the previous GS716Tv2, GS724Tv3, and GS748Tv4 switches. This maintenance release supports the EAV (Ethernet Audio Video) feature on the new GS716Tv3, GS724Tv4, and GS748Tv5 switches. Some software issues are also fixed in this release. See the release notes for the fixed issues and known issues. GS716Tv3, GS724Tv4, and GS748Tv5 support the latest Smart Control Center. Use SCC version 1.1.3.2 fo...

Security Advisory for CVE-2016-7941, PSV-2016-0150 - NETGEAR Support

NETGEAR is aware of a security issue on some models of ProSAFE Gigabit Smart Managed Switches that can let an attacker permanently modify certain system variables. This vulnerability occurs when a remote attacker uses SNMP to access stored XSS on the web management interface. The only system variables that can be accessed and modified because of this vulnerability are system name, system location, and system contact. No other settings are vulnerable, and no network traffic or credentials are exp...

NMS300 Software Release 1.5.0.11 - NETGEAR Support

This release notes contains features and known issues for NETGEAR ProSAFE NMS300 Network Management Software release 1.5.0.11. NMS300 issues fixed on 1.5.0.11 Removed the menu service start/stop in the start menu. The service start/stop menu doesn't work on windows 10. User can start/stop service via service manager which is provided by windows. On NMS300v1.4, SMTP uses computer's name to create a sender's email which is blocked by some SMTP server in some scenario. The Common STP data is not av...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.11 - NETGEAR Support

Fixed Issues ,Fixed the issue where device view does not work after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer ,Fixed the issue where ‘Wake on Lan’ doesn’t work when LACP LAG is configured on that port ,Fixed the issue where DHCP discover packet is sent incorrectly from the switch with source IP other than 0.0.0.0 Known issues Warning messages pop up when the HTTPS admin status is enabled. [Workaround]: Refresh the GUI screen. The cable test results sometimes...

Security Advisory for CVE-2013-4775, PSV-2016-0093 - NETGEAR Support

The original version of this advisory and the Encripto Security Advisory where this issue was identified incorrectly asserted that this defect could be exploited by a “remote attacker.” In fact, an attacker trying to exploit this vulnerability must be either physically or logically present on the same subnet as the switch. NETGEAR is aware of a security issue that can allow attackers on your local network to read startup configuration files, including encrypted admin credentials, for some models...

Common questions about Smart Control Center - NETGEAR Support

What is Smart Control Center utility? NETGEAR's new Smart Control Center (SCC) is a Windows based application replaces the older Smart Wizard Discovery Utility. Its main function is to discover smart switches in your network and to help you to perform management operations like firmware upgrade and IP assignment. The SCC can also support mass configuration along with mass firmware upload. I used the Smart Control Center to find the Smart switch's IP address, but I cannot access the Smart switch'...

NMS300 Software Release 1.4.0.11 - NETGEAR Support

This release notes contains features and known issues for NETGEAR ProSAFE NMS300 Network Management Software release 1.4.0.11. Key features available in this 1.4 release of NMS300 software are the following: Support for additional switch, wireless access point & firewall devices. See table below. Basic support for sFlow: NMS300 can be configured as a receiver of flow samples from NTGR Managed switches which support sFlow. The below list provides the specific device models which are now supported...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.33 - NETGEAR Support

New Features and Enhancements: For compliance with California state law, the default “password” must be changed after logging into the switch. To configure SNMPv3, Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. If you upgrade firmware to V6.3.1.33 from an older version, clear your temporary internet files or browser cache to see the new settings. Added a new option under “Security > Management Security > SCC Control” ...

"Voice VLAN" alternative missing for GS724Tv3 | NETGEAR Communities

I've just updated the firmware of a GS724Tv3 to 5.0.3.2. According to this kb document (pdf) that version should have the Voice VLAN feature, but in the...

GS724Tv3 VLAN issue | NETGEAR Communities

I'm used to port based VLANs in the past and I'm trying to configure VLAN tagging and this T vs U business is not clicking my head.I have a firewall that has...

GS724Tv3 Management Hangs | NETGEAR Communities

I've got 5 Netgear GS724Tv3 switches, all with current firmware. Each and every one of them stops responding to management traffic after three weeks or so of...

Help Required - Netgear GS724Tv3 duplex issue | NETGEAR Communities

Hi thereWondered if someone could advise if my switch is faulty or if its a known issue.I picked up one of these switches yesterday, installed it onto the...

CLI User Manual for GS724Tv3? | NETGEAR Communities

Is there a CLI Reference available to download somewhere for the GS724T series of switches?(great forum here BTW, very helpful so far!)Micky

Recover an old GS724T V3 | NETGEAR Communities

Hi,I have fallen into the trap of updating the firmware on this unit.It's from ebay which netgear didn't allow transfer of lifetime warranty.I have read a...

GS724Tv3 | NETGEAR Communities

Hi I have had this switch awhile.  It appears to be working ok except that on Microsoft Teams calls they frequently drop out for several seconds. ...

Looking for ancient firmware for GS724T v3 | NETGEAR Communities

I have an old GS724T v3 that is on firmware V1.0.3_30. I would like to bring it up to the latest firmware (5.4.2.30). In searching the forum, I see that is...

Ports unavailable on GS724Tv3 | NETGEAR Communities

HelloI bought a second-hand GS724Tv3. It seems to run correctly except that it has disabled 8 port (g1 to g8) : on connecting any device, not even the "link"...

GS724Tv3 5.0.3.5 kein Zugriff über Webinterface, Firmwareupdate über SCC geht auch nicht | NETGEAR Communities

Hallo, wir haben 10 Netgearswitche GS716T bis 48T von v3 bis v5. Seit kurzem habe ich das Problem, dass die drei Switche GS724Tv3 mit Firmware 5.0.3.5...

GS724Tv3 — 24-Port Gigabit Ethernet Smart Switch with 2 SFP Ports - cable testing | NETGEAR Communities

Hi, I have the following type of swtich which I want to install:GS724Tv3 — 24-Port Gigabit Ethernet Smart Switch with 2 SFP...

GS724Tv3 How do I define IP address for a particular port, as I don't want my client to change IP | NETGEAR Communities

Theory is to bind IP to a particular MAC address of the NIC, but how can I do this with GS724Tv3? Thanks!

Please kindly help: Need MIB files GS724Tv3 fan and temperature | NETGEAR Communities

Hi, I found there is nowhere telling me fan status (failed or not) and switch overall temperature in GS724Tv3 admin GUI. Could you kindly help to...

using Vlan assignment mode with gs724tv3 (v5.4.2.30) | NETGEAR Communities

Hello, I use freeradius (3.0) server to authenticate client on the switch gs724tv3 (v5.4.2.30) and it work properly Now, i want to assign a Vlan ID...

Looking for GS724Tv3 MIB(s) | NETGEAR Communities

Hi, I’m looking to download the MIB files for the NetGear proprietary subtree (all the items under 1.3.6.1.4.1.4526.11). I previously asked the same question...

config export/import GS724T v3 -> v4 | NETGEAR Communities

As mentioned in my earlier thread:https://community.netgear.com/t5/Plus-and-Smart-Switches-Forum/config-export-import-GS724T-v2-gt-v4/m-p/2240536#M21211Is...

GS724T V3 many questions | NETGEAR Communities

I recently bought a GS724T V3. I am having a few issues, wondering if anyone is familar enough to help or is this device just too old?Bios is current version...

blocked port on gs724tv3 | NETGEAR Communities

Hello, I have a GS724Tv3 running which has disabled one port (port 7) - on connecting any device, not even the "link" LED lights up. The cable and...

GS724Tv3 Can't generate text configuration | NETGEAR Communities

Can't generate text configuration.choose "Maintenance", next "download", next "HTTP File Download", next "Select File",next create a file with the extension...

Netgear gs724t v3 wont factory reset | NETGEAR Communities

HELP!!!i... so i have had a couple of gs724t v3 switches for some years and decided to update the firmware on one of them but something went wrong and...

NETGEAR Unveils GS724Tv6 & GS748Tv6: Future-Proof Smart Switches

Discover NETGEAR's latest smart switches, GS724Tv6 and GS748Tv6, designed for efficient, future-ready network management in growing businesses.

New MS305E and MS308E Multi-Gig Switches - NETGEAR Blog

NETGEAR has launched the multi-gig five port MS305E and multi-gig eight-port MS308E switches as a lightly smart managed upgrade to their unmanaged predecessors.

Business IT Networking Articles - NETGEAR Blog

Discover how to get the most out of your business IT network with the latest technology and best practices. Learn More.

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

TKTEI's Network Success with NETGEAR's solutions

TKTEI improved network efficiency with NETGEAR solutions, reducing costs and downtime. Highly recommended for reliability and ease of use.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff