Search results for: XSM4340V

NETGEAR Engage Version 1.3.9.9 - NETGEAR Support

New Features: Support the following M4350 switch models: XSM4340CV XSM4340V XSM4344C VSM4320C Support SMPTE profile Bug Fixes: Fixes online single switch firmware update failure on a stacked unit. Fixes non-ProAV devices shown as on-boardable in the discovered device table. Fixes Network Logs page response time is currently more than 5 seconds. Fixes Site Neighbors page is empty for a large network. Fixes alert message about DNS IP configuration needs to be improved. Yes – Configure DNS; No- Pro...

M4350 Firmware Version 14.0.2.33 - NETGEAR Support

This firmware is intended to download on M4350-24X8F8V (XSM4340V), M4350-36X4V (XSM4340CV), M4350-32F8V (XSM4340FV) models if switches are running on firmware version 14.0.2.23, boot code version 1.0.0.8 and need to upgrade to the latest firmware Bug Fixes: This firmware addresses the following bugs: Fixes the issue where M4350-24X8F8V (XSM4340V), M4350-36X4V (XSM4340CV), M4350-32F8V (XSM4340FV) models are running on firmware version 14.0.2.23, boot code version 1.0.0.8 and upgrade to any higher...

M4350 Firmware Version 14.0.9.10 - NETGEAR Support

Release Date: August 13, 2026 This firmware supports the M4350 series models. Enhancements: Support for up to four PTP domains with an updated PTP command format. Multiple PTP domains are available through CLI and the device UI only. The AV UI continues to support a single PTP domain. The PTP command structure and architecture are changed to a domain-based format. Existing PTP configurations are migrated automatically when you upgrade the firmware. However, we recommend backing up the switch con...

NETGEAR Engage Controller Supported Devices - NETGEAR Support

The Engage Controller supports the following device models: Pro Routers: PR460X WiFi Access Points: WBE718, WBE758, WAX608Y Fully Managed Switches: M4250 series: Model SKU M4250-8G2XF-PoE+ GSM4210PX M4250-9G1F-PoE+ GSM4210PD M4250-10G2F-PoE+ GSM4212P M4250-10G2XF-PoE+ GSM4212PX M4250-10G2XF-PoE++ GSM4212UX M4250-12M2XF MSM4214X M4250-16XF XSM4216F M4250-26G4F-PoE+ GSM4230P M4250-26G4F-PoE++ GSM4230UP M4250-26G4XF-PoE+ GSM4230PX M4250-40G8F-PoE+ GSM4248P M4250-40G8XF-PoE+ GSM4248PX M4250-40G8XF-P...

NETGEAR AV and IT Managed Switches M4350 Series - NETGEAR Support

The following table lists the port and PoE configurations for the M4350 series of fully managed switches: Model/ SKU 1000 BASE-T RJ45 2.5G BASE-T RJ45 2.5G BASE-X SFP 10G BASE-T RJ45 10G BASE-X SFP+ 25G BASE-X QSFP28 100G BASE-X QSFP28 PoE Budget SMPTE-Capable M4350-24G4XF GSM4328 24 ports PoE++ 4 ports 648W (base) up to 720W M4350-48G4XF GSM4352 48 ports PoE++ 4 ports 236W (base) up to 1440W M4350-44M4X4V MSM4352 44 ports PoE++ 4 ports PoE++ 4 ports 194W (base) up to 3314W M4350-8X8F XSM4316 8 ...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

NETGEAR Engage Version 2.0.3.13 - NETGEAR Support

New Features: Enhancement of the management VLAN for AP devices and the PR460X Pro Router: Ensures consistent management VLAN settings across the site. Support for lock/unlock site configuration: Added a lock button to enable or disable the site configuration for security purposes. Added the Hybrid SMPTE AES67 and Audio AES67 edge profile: This profile lets you set up a mixed environment on the management VLAN in which the SMPTE profile with PTPv2 BC/GM (boundary clock/grandmaster clock) runs on...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

NETGEAR Engage Version 2.1.1.6 - NETGEAR Support

New Features: Support for new password rules throughout the Engage Controller and sites: The password must be 8 to 64 characters in length and must contain at least one uppercase letter, one lowercase letter, and one number. The following special characters are allowed: ! @ # $ % ^ & * ( ). Support for the following new AV Network Profiles: Sennheiser TeamConnect Bar S - Single Domain Mode HARMAN Professional AV Network Nice Home Management Pharos Lighting Control Pharos Lighting Data ETC Lighti...

M4350 Firmware Version 14.0.6.9 - NETGEAR Support

Enhancements: The AV UI provides the following enhancements: Support for new profiles: DICENTIS Conference system profile Telos Alliance / Livewire+ AES67 Support for configurable colors on the Audio Technica profile. Support for the coexistence of a PTP boundary clock and a transparent clock on an Auto-Trunk interface. The firmware provides the following enhancements: Supports four new models M4350-8M2V (MSM4310), M4350-24M4X4V (MSM4332), M4350-24F4X (MSM4328F) & M4350-40F4C (XSM4344FC). Suppor...

M4350 Firmware Version 14.0.4.14 - NETGEAR Support

Enhancements: The AV UI provides the following enhancements: Support for new profiles: Harman AV Network, Sennheiser, Nice AV Network, Pharos Lighting Control and Data, and ETC. New password policy: When you create or change a password on the AV UI, a new password policy applies. The password must be 8 to 64 characters in length and must contain at least one uppercase letter, one lowercase letter, and one number. The firmware provides the following enhancements: Support for OUI based VLAN assign...

What NETGEAR switch should I use with my WBE750 or WBE758 wireless access point? - NETGEAR Support

When selecting a switch to deploy with your WBE750 or WBE758 access point (AP), there are some considerations to bear in mind. Powering the AP: the AP can be powered by a 12V DC, 3.5A power adapter (not included), a PoE injector (not included) or using Power over Ethernet (PoE). To power the AP using PoE it is important the switch can provide the correct type of PoE and provide a sufficient PoE budget depending on the number of AP’s that require PoE. Due to the high-performance capabilities of t...

M4300 Firmware Version 12.0.9.3 - NETGEAR Support

Applicable Models: M4300-12X12F (XSM4324S) M4300-16X (XSM4316PA) M4300-16X (XSM4316PB) M4300-24X (XSM4324CS) M4300-24X24F (XSM4348S) M4300-24XF (XSM4324FS) M4300-28G (GSM4328S) M4300-28G-PoE+ (GSM4328PA) M4300-28G-PoE+ (GSM4328PB) M4300-48X (XSM4348CS) M4300-48XF (XSM4348FS) M4300-52G (GSM4352S) M4300-52G-PoE+ (GSM4352PA) M4300-52G-PoE+ (GSM4352PB) M4300-8X8F (XSM4316S) M4300-96X(XSM4396S) New Features and Enhancements: Compliant with California Privacy Law: Force user to change the default pass...

M4300 Firmware Version 12.0.6.7 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed on 12.0.6.7 since 12.0.6.6: SFP-BIDI module is not active in M4300-24x24F at 1G Speed with third party switch Tech-support file for M4300 is missing the critical 'show interface counters' output Multicast Packets is counted as Unicast Packets when t...

M4300 Firmware Version 12.0.2.12 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) Bug Fixes: Root Unauthenticated Remote Code Execute via DevShell. Logging email" feature does not send an email via SMTP. Debug information for the SFP + transceivers is incorrect on the 24X24F Known issues: Loop Protect functionality does not work if igmpsnooping is enabled. Upg...

M4300 Firmware Version 12.0.6.6 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New features in 12.0.6.6: Supports new module APM402XL which has 40G QSFP ports for M4300-96X Supports UPnP and Bonjour to allow management station to discover the IP address of management VLAN or Service port. Adds ‘time-a.netgear.com’ and ‘time-c.netgear.com...

M4300 Firmware Version 12.0.7.17 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bug Fixes: After LAG logical interface is disabled, you can still enable individual port members without admin enabling the LAG interface first. Traffic loss when firmware upgrade/reboot on M4300 stack PTP Master clock election fails after adding new device to...

M4300 Firmware Version 12.0.2.20 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) Bug Fixes: Packet loss/ Connection drops due to "Timeout to CPU" and "Out of memory" errors. M4300-12X12F (XSM4324S) - device rebooted itself without any reason, customer wants to know the root cause. DUT lost PBR configuration and hung-up when executing 'clear arp-cache' command...

M4300 Firmware Version 12.0.7.10 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed since 12.0.7.9: mDNS protocol packets are not flooded in the VLAN when Apple Bonjour protocol is enabled Stack port packet counter was miscalculated which resulted in displaying excessive packet drops Add BitRate info to 'show interface counter' out...

Bricked xsm4348S-100NES after erase pernament storage | NETGEAR Communities

 Hey,Today I was clearing my switch and accidentally deleted the permanent storage. As a result, everything on my device was erased. 😞 Is there any way...

We have 2 NETGEAR M4300-48X (XSM4348CS) Switches connected as stacked in our production environment | NETGEAR Communities

We have 2 NETGEAR M4300-48X (XSM4348CS) switches in our production environment. The firmware version of switch is 12.0.17.9. There are multiple server...

XSM4348CS can't take Firmware upgrade 12.0.17.10 | NETGEAR Communities

I have a fairly new ( > 1 year )  XSM-4348CS 10 GigE switch that currently has firmware 12.0.13.7.  I have tried several times to upgrade the...

Letter of Volatility for XSM4348S-100NES | NETGEAR Communities

Hi -- Are you able to provide a letter of volatility for the XSM4348S-100NES switch? 

XSM4300 not powering on - red/green on PSU with relay noise | NETGEAR Communities

Netgear M4300  Anyone knows what it means the red/green LED on the power supply? It is also noticeable a clicking relay...

XSM4348CS Stencil Request | NETGEAR Communities

I am looking to obtain the stencils for the XSM4348CS switch.  Please let me know if these are available.  Thank you.

XSM4348S firmware update causes errors | NETGEAR Communities

Hi all, I've got a M4300 24x24F that is currently running firmware version 12.0.0.19,with a backup image of 12.0.0.14 (The original firmware that came...

XS748T, GS752TX, XSM4348S Letters of Volatility | NETGEAR Communities

Greetings. My company requires letters of volatility for the following switch models: NETGEAR 48-Port Gbit Smart Managed Pro Switch, L2+/L3 Lite, SFP+...

M4300-24X24F (XSM4348S) switch: FC SAN | NETGEAR Communities

Hello everybody,I have a fiber SAN storage infrastructure. I recently purchased the XSM4348S switch and can't get this switch to work with FC SAN. Is it...

Letter of Volatility for XSM4348S | NETGEAR Communities

I need a letter of volatility for a XSM4348S (M4300 24x24F Managed Switch)   Thanks!

[M4300] M4300-24X24F (XSM4348S) Stacking, new environment, other brand switches | NETGEAR Communities

Good morning all, For the company I work for I am currently desinging a brandnew IT environment.This will be based on Hyper-V, Windows Server 2016 with...

M4300-48X overheating | NETGEAR Communities

 Hello Netgear Community, It is my first post here, nice to meet you all! Last friday, I faced an issue with my M4300-48X (XSM4348CS-100NES)...

M4300-48 Bricked | NETGEAR Communities

I inherited a rack at my new job which includes the M4300-48 (xsm4348cs) managed switch. All was fine for the first few months but now my switch is bricked....

LAG ports create DUP packets and STP chaos | NETGEAR Communities

Hi . We have exchanged or previous Aruba switches with Netgear XSM4348S switches, which are acting as a stack (4 switches). Behind these switches are...

Strange stack problem | NETGEAR Communities

Having strange probelm XSM4342S I have two switches port 24 on both switches are stack. Switch A is mater and B is slave.  I switched off Switch A,...

M4300 firmware 12.0.2.15 - switch was reset due to operator intervention | NETGEAR Communities

Hi, We have 4 pcs M4300 XSM4324CS-100NES and 6 pcs XSM4348S-100NES. 2 months after setting all them up they have started to restart...

[MSM4310/VSM4320C] mDNS communication between different VLAN. | NETGEAR Communities

Hi everyone, I try to setup MSM4310 and VSM4320C with several VLAN for example Control, Video Streaming and etc...Does anyone know how can I routing...

M4350-24X8F8V (XSM4340V) | 24x10G/Multi-Gig PoE++ (290W base, up to 1,770W), 8xSFP+ and 8xSFP28 25G Managed Switch | NETGEAR Support

M4350-24X8F8V (XSM4340V) - 24x10G/Multi-Gig PoE++ (290W base, up to 1,770W), 8xSFP+ and 8xSFP28 25G Managed Switch

M4350-32F8V (XSM4340FV) | 32xSFP+ and 8xSFP28 25G Managed Switch | NETGEAR Support

M4350-32F8V (XSM4340FV) - 32xSFP+ and 8xSFP28 25G Managed Switch

M4350-36X4V (XSM4340CV) | 36x10G/Multi-Gig PoE++ (280W base, up to 1,760W) and 4xSFP28 25G Managed Switch | NETGEAR Support

M4350-36X4V (XSM4340CV) - 36x10G/Multi-Gig PoE++ (280W base, up to 1,760W) and 4xSFP28 25G Managed Switch

M4300-48XF (XSM4348FS) | 48x10G Stackable Managed Switch with 48xSFP+ | NETGEAR Support

M4300-48XF (XSM4348FS) - 48x10G Stackable Managed Switch with 48xSFP+

M4300-48X (XSM4348CS) | Stackable Managed Switch with 48x10GBASE-T | NETGEAR Support

M4300-48X (XSM4348CS) - Stackable Managed Switch with 48x10GBASE-T

M4300-24X24F (XSM4348S) | Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 | NETGEAR Support

M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3

M4350-40X4C (XSM4344C) | 40x10G/Multi-Gig PoE++ (196W base, up to 1,676W) and 4xQSFP28 100G Managed Switch | NETGEAR Support

M4350-40X4C (XSM4344C) - 40x10G/Multi-Gig PoE++ (196W base, up to 1,676W) and 4xQSFP28 100G Managed Switch

TAA Compliant Network Switches

We’re proud to announce TAA compliant switches comprised of several models of our award-winning M4250 and new M4350 switch series.

NETGEAR Expands Pro Av Managed Switch Portfolio With Four New Models At InfoComm 2025 Booth 4401 - NETGEAR Blog

NETGEAR, partnering with approximately 450 manufacturers, is expanding its M4350 managed switch portfolio with four new models.

NETGEAR Tests Panasonic SMPTE ST-2110 Solutions

NETGEAR announced an interoperability partnership with Panasonic Connect for the KAIROS IT/IP Platform for live production.

Samsung Transforms AV Training with NETGEAR Solutions - NETGEAR Blog

Samsung SHRDI boosts its AV infrastructure with NETGEAR switches, delivering low-latency, scalable, and future-ready training environments.

NETGEAR EXPANDS GROWING LIST OF AV TECHNOLOGY PARTNERS - NETGEAR Blog

NETGEAR announces interoperability between AV switches and Intel’s Media Transport Library and E800 series Network Interface Cards .

COEP's Technological University builds on its heritage of excellence with world-class campus-wide networking - NETGEAR Blog

COEPS Technological University builds on its heritage of excellence with world-class campus-wide networking

Tokyo Broadcasting System's R&D base

Tech Design X, Tokyo Broadcasting System’s R&Dbase, takes full advantage of NETGEAR’s AV over IPswitches to create content for the future.