Search results for: WAX610

WAX610 / WAX610Y Firmware Version 10.4.1.5 - NETGEAR Support

Enhancements: Support for Australia, and New Zealand wireless regions for WAX610Y access point System stability enhancements. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes the issue where the access point reboots unexpectedly. Fixes the issue where the access point stops serving WiFi clients unexpectedly. Fixes the issue where you cannot create an mDNS policy if...

WAX610 / WAX610Y Firmware Version 10.8.7.1 - NETGEAR Support

New Features and Enhancements: Global MAC ACLs and traffic policies, including the following options: MAC ACLs for broadcast and multicast traffic from the wired LAN Wireless Noise Filter with default traffic rules to globally control traffic based on MAC addresses, IP addresses, and protocols Global Traffic Filter with unique traffic rules to globally control traffic based on MAC addresses, IP addresses, and protocols SSID-based MAC ACLs and traffic policies for WiFi networks, including the fol...

WAX610 / WAX610Y Firmware Version 10.7.5.3 - NETGEAR Support

Enhancements: Alarms are now generated if a RADIUS server failover occurs. An alarm is generated if the primary RADIUS server becomes unreachable and a switchover occurs to the secondary RADIUS sever, or the other way around. An alarm is also raised if only a single RADIUS server is configured and the RADIUS server stops responding to the requests from the AP. After a captive portal session expires for a client, the client is now disconnected from the SSID so that the client can be automatically...

WAX610 / WAX610Y Firmware Version 10.8.10.9 - NETGEAR Support

Bug Fixes: Various bug fixes Known Issues: Changes to an SSID with NAT mode might take up to three minutes to be applied. Workaround: Wait at least three minutes before connecting any clients. The AP stops responding after changing or enabling an Instant Captive Portal and then changing or enabling a DVLAN configuration, or the other way around. Workaround: After enabling the Instant Captive Portal, wait a few minutes before enabling the DVLAN configuration. Or, after enabling the DVLAN configur...

WAX610 / WAX610Y Firmware Version 10.6.0.7 - NETGEAR Support

Enhancements: Option to add subnet mask and DHCP lease time configuration in NAT mode SSID configuration. Improved client connection/disconnection alarm notifications. Bug Fixes: Fixes various issues in the External Captive Portal feature. Fixes an issue where the AP starts operating on 802.3af power even when powered by an 802.3at or 802.3bt switch. Fixes an issue where the captive portal splash page is not displayed when a client connects to a Captive portal SSID with Client Isolation feature ...

WAX610 / WAX610Y Firmware Version 10.7.0.10 - NETGEAR Support

Enhancements: The AP transmit power (in dBm) is now displayed in the local browser interface and in NETGEAR Insight. You can now log in to a client’s information in syslog messages. Load balancing alarms now include the reason why a client is denied a connection to the AP. The AP now prevents client connectivity issues while the AP scans for neighboring APs. All types of traffic are now blocked for a client that is connected to a captive portal SSID before web authentication is complete. (In ear...

WAX610 / WAX610Y Firmware Version 9.6.3.2 - NETGEAR Support

Bug Fixes: Fixes issue where user cannot set certain FQDN. Fixes config update crash issue where local GUI shows blank. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/ Known Issues: Due to the removal of U-NII-1 and U-NII-2A channels from the WAX610Y in Europe to meet the CE regulatory requirement, customers might face issues with the mesh formation when the root AP is operating in channels U-NII-1...

WAX610 / WAX610Y Firmware Version 9.5.4.3 - NETGEAR Support

Enhancements: WAX610 now supports Canada. Supports channel migration to auto for the WAX610Y in Europe if the current operating channel is in U-NII-1 or U-NII-2A. Supports channel migration to 100 for the WAX610Y in Europe if the WDS is established in U-NII-1 or U-NII-2A. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes the issue where wireless clients are not able to connect to the...

WAX610 / WAX610Y Firmware Version 12.8.0.7 - NETGEAR Support

Release Date: July 8, 2026 New Features and Enhancements: Added support for Vietnam and Philippines. Supports backward compatibility for Simple Network Management Protocol version 2 (SNMPv2). Support for various stability improvements. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Bug Fixes: Fixes the issue where LLDP data is not sent out by the Access Point. Fixes the issue in...

WAX610 / WAX610Y Firmware Version 10.3.0.7 - NETGEAR Support

Enhancements: Supports a new feature: The multicast DNS (mDNS) gateway. Bug Fixes: Fixes the issue where the local browser user interface (UI) becomes inaccessible. The SSID is broadcasting, but after 24 hours, you cannot get a WiFi connection. Fixes the user-name attributes for RADIUS server authentication. Fixes the issue where connected clients are unable to reach the Internet when NAT mode with URL filtering is enabled. Fixes the issue where the VLAN ID and user name are not updated on the C...

WAX610 / WAX610Y Firmware Version 10.3.2.2 - NETGEAR Support

Enhancements: Support for the Japan country option in the European SKU of model WAX610Y. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/ Known Issues: A RADIUS MAC ACL does not work with multi-PSK and a dynamic VLAN (DVLAN). mDNS: A device running Windows cannot discover certain printers. Workaround: Manually add the IP address of the printer on the Windows device. mDNS: Even though Apple AirPlay s...

WAX610 / WAX610Y Firmware version 10.8.13.2 - NETGEAR Support

New Features and Enhancements: Support for the NETGEAR Insight Internal Captive Portal SSID.You can access this feature in the Insight Cloud Portal (Wireless > Settings > Edit SSID > Captive Portal). Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Known Issues: Changes to an SSID with NAT mode might take up to three minutes to be applied.Workaround: Wait at least three minutes be...

WAX610 / WAX610Y Firmware Version 9.6.2.6 - NETGEAR Support

Bug Fixes: Firmware upgrade check at the day zero configuration page in standalone mode. Now MAC ACL supports 512 wireless clients in standalone and Insight mode. Added host name in the client event notifications in standalone and Insight mode. Bug Fixes: Fixes issue with running multiple NTP processes. Fixes issue when client isolation is enabled and certain users can still access local resources. Fixes an issue where the APs IP address changes when creating or editing an SSID. Fixes an issue w...

WAX610 / WAX610Y Firmware Version 9.1.0.16 - NETGEAR Support

New Features and Enhancements: 802.11r Fast Roaming – Allows wireless clients to roam seamlessly between APs belonging to the same Insight location. This feature is available only for access points operating in Insight management mode. WPA3 Enterprise Authentication – Provides greater security than WPA2. WPA3-Enterprise builds on WPA2 and ensures the consistent application of security protocols across the network. It makes use of Suite-B 192-bit security suite that is aligned with Commercial Nat...

WAX610 / WAX610Y Firmware Version 10.4.0.5 - NETGEAR Support

Enhancements: Enhancements for optimal channel selection and transmit power. Support for up to 64 dynamic VLANs (DVLANs). System stability enhancements. Option to customize the channel utilization threshold in user notifications. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes the issue where you cannot reach the local browser UI when you change the management VLA...

WAX610 / WAX610Y Firmware Version 12.5.0.15 - NETGEAR Support

Release Date: January 21, 2026 New Features and Enhancements: This firmware provides the following features: Support for DHCP packet tracing Support for 1K Multi Pre-Shared Key (MPSK) per SSID, with a maximum of four SSIDs Support for Simple Network Management Protocol version 3 (SNMPv3) Support for sticky client RSSI threshold up to -70dbm Support for alarm generation whenever: Critical process is stuck or not running Network reachability and VLAN connectivity is lost Support for Adipsys Extern...

WAX610 / WAX610Y Firmware Version 10.5.0.16 - NETGEAR Support

Bug Fixes: Fixes the issue where the transmitting power of the access point (AP) is unexpectedly reduced when you enable 802.11r roaming for an SSID. Fixes the issue where RADIUS accounting does not work in an external captive portal for WiFi clients that are connected to the portal’s SSID with open authentication. Known Issues: Facebook Wi-Fi authentication does not work because Facebook has discontinued the support for this feature. Workaround: Use the Instant Captive Portal feature or the bas...

WAX610 / WAX610Y Firmware Version 9.0.1.9 - NETGEAR Support

Bug Fixes: Fixes WAX610/WAX610Y Access Point MAC address changes to invalid MAC address resulting in IP conflict & client connectivity issues. Fixes WAX610/WAX610Y Insight onboarding issues. Fixes hard reset button is not working when APs uptime is more than 10 minutes. Known Issues: Issues in Instant WiFi can cause the Access Point to operate on a non-optimum channel. Workaround: Configure the Access Point to use a static channel. Neighbor AP detection does not work in either Insight management...

WAX610 / WAX610Y Firmware Version 9.5.3.2 - NETGEAR Support

Bug Fixes: Fixes the sorting option on the URL Tracking page. Fixes the issue where the firmware updates after a session times out. Fixes the issue where wireless clients aren't getting an IP address when RADIUS MAC ACL is enabled. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known Issues: Some iOS devices with specific iOS versions might fail to connect to a WPA3 enterprise SSID. Workaround: Up...

WAX610 / WAX610Y Firmware Version 10.6.1.1 - NETGEAR Support

Bug Fixes: Fixes the issue where clients might fail to rejoin the network when the wireless SSID is configured with 802.11r Fast Roaming enabled and the AP has been up for two weeks or more. Known Issues: Changes to a NAT SSID configuration can take 2 to 3 minutes to apply. Workaround: Please wait at least 3 minutes before connecting any clients. Facebook Wi-Fi authentication does not work because Facebook has discontinued the support for this feature. Workaround: Use the Instant Captive Portal ...

WAX610 Radius accounting | NETGEAR Communities

Hi there.I have recently attempted to set up Radius authentication and accounting between PFSense and a Wax610 wireless AP.I am able to successfully use...

VLAN Set-up with WAX610, MS510TXPP, GS110EMX & pfSense | NETGEAR Communities

I'll start out by saying I am not a networking expert and have struggled thus far successfully to get a new home network using a homemade pfSense box to...

Only 100mbps from GS108PEv3 to WAX610Y while 1000mbps is coming from modem | NETGEAR Communities

Hi there, I've saw some threads about this subject but I couldn't find a solution for this: I have my standard ISP router (Arcadyan Experia Box...

ORBI40 with WAX610 | NETGEAR Communities

Currently I have an older Orbi system (ORBI40, one base, 2 satellites). My speed and coverage is slow on the second floor, and coverage is poor in the...

WAX210 Firmware 1.1.0.34 Bug – SSID Password Complexity Incorrectly Enforced | NETGEAR Communities

Hi everyone — I’m seeing what looks like a firmware regression on the WAX210 after updating to v1.1.0.34, and I want to report it in case others are...

DFS Channels: How to access on the WAX210? | NETGEAR Communities

The promotional materials for the WAX210 indicate the hardware supports using DFS channels. The manual even gives a stern warning that I am responsible for...

MS510TXUP confused about VLAN for Guest Network | NETGEAR Communities

I have 3 WAX630E AP's connected to this switch, which connects to my firewall appliance.  I am trying to setup a VLAN for guest network.  I have...

m4300-96x POE++ | NETGEAR Communities

Using a m4300-96x switch with poe+...unfortunately its like 1 watt shy of keeping the wax630e APs at full power.  Any insight into a poe++ module coming...

Netgear MS108UP switch to AP and internet | NETGEAR Communities

Setting up Netgear MS108UP with WAX630EP AP? Odd not to have a non POE uplink port that connects the switch to an existing network.Would set up be:ISP modem/...

Ping spikes to MS510TXUP | NETGEAR Communities

Hi, I'm doing some diagnostics and running a couple of pings in the process.We have a Netgear MS510TXUP switch with 4 WAX630 AP's...

WAX360 ... How many extenders per root? | NETGEAR Communities

This is about WAX630 I have a setup of 6  WAX 630 access points.  When I setup Mesh as one root and five extenders one of the extenders...

Replacing router and 2 access points with new Orbi system | NETGEAR Communities

I currently have a fios router and 2 Linksys WAP610 access points.  My home occupies 2400 sq ft on two floors in an older NY high rise. Wireless signals...

WAX615 | Insight Managed WiFi 6 AX3000 Dual-band Multi-Gig Access Point | NETGEAR Support

WAX615 - Insight Managed WiFi 6 AX3000 Dual-band Multi-Gig Access Point

WAX210PA | AX1800 Dual Band PoE WiFi 6 Access Point with Power Adapter | NETGEAR Support

WAX210PA - AX1800 Dual Band PoE WiFi 6 Access Point with Power Adapter

WAX630EP | Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point with Power Adapter | NETGEAR Support

WAX630EP - Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point with Power Adapter

WAX615PA | Insight Managed WiFi 6 AX3000 Dual-band Multi-Gig Access Point with Power Adapter | NETGEAR Support

WAX615PA - Insight Managed WiFi 6 AX3000 Dual-band Multi-Gig Access Point with Power Adapter

NETGEAR Redefines Guest WiFi with its Most Compact Wall-mount Access Point Yet - NETGEAR Blog

NETGEAR announced the WAX610W, a compact, wall-mount Wi-Fi 6 access point designed to deliver high-performance, cost-effective connectivity for hospitality environments, multi-dwelling units (MDUs), and education settings.

NETGEAR Takes Center Stage at CEDIA 2025 - NETGEAR Blog

Discover NETGEAR’s latest smart home networking innovations at CEDIA 2025 in Denver, designed for integrators and luxury installations.

NETGEAR: Empowering Small and Medium Businesses to Stay Connected

Discover how NETGEAR is helping small and medium businesses stay connected with robust, efficient networking solutions tailored to their needs.

NETGEAR Access Points Achieve EU RED Cybersecurity Certification for WiFi 6 & 7 - NETGEAR Blog

NETGEAR WiFi 6 & 7 Access Points now RED certified, meeting EU cybersecurity standards for secure, cloud-managed networks.

DC Montessori School Chandigarh - Case Study - NETGEAR Blog

DCM School Chandigarh has upgraded its network with NETGEAR Business, improving speed, reliability, and security for staff and students.

TKTEI's Network Success with NETGEAR's solutions

TKTEI improved network efficiency with NETGEAR solutions, reducing costs and downtime. Highly recommended for reliability and ease of use.

Cuisine Schmidt IT Solutions - Simplify Business Processes

Schmidt cuisine enables their advisors to present new kitchen designs using tablets to provide its customers an excellent buying experience.

Assist Solutions on the Business Impact of NETGEAR Insight - NETGEAR Blog

Assist Solutions uses NETGEAR Insight for secure, cloud-managed networking with seamless Salesforce integration and scalable global support.

Wireless Design Service for SMB & WiFi 6 AP WAX625 - NETGEAR Business

Optimize your wireless network design with Wireless Design Service WAX625. Get expert advice and custom design for a robust wireless solution.

Introducing 2.5Gb Unmanaged PoE++ Switch MS108UP - NETGEAR Hub

MS108UP 2.5Gb Unmanaged PoE++ Switch for reliable and efficient network performance. Pair it with WiFi 6E Access Points for powerful connections.

It’s a Hole-in-One for WiFi at Blacknest Golf & Country Club - NETGEAR Blog

NETGEAR helped Blacknes Golf & Country Club enhance connectivity and efficiency with advanced IT solutions. Learn more about the full case study today.

NARL Builds a High-Availability, High-Throughput Network Powered by NETGEAR - NETGEAR Blog

Discover how NARL built a high-availability, high-throughput research network using NETGEAR MLAG to enable nonstop, petabyte-scale scientific data processing.

Cloud Enabled Network Control For Wireless AP - NETGEAR Blog

"Discover the power of cloud-enabled network control for wireless access points (AP) in your business. Netgear's blog explores the benefits, features, and management capabilities of cloud-based solutions to streamline your wireless network operations and enhance connectivity.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff

東ホールディングス – 事業継続と成長を支えるネットギアの選択 - NETGEAR Blog

東ホールディングスは、事業の継続性を強化し、成長を推進するために、セキュアで信頼性が高く、将来に対応可能なネットワーキングソリューションを提供するNETGEARとパートナーシップを締結しました。

Next-Gen 6GHz WiFi 6E AP vs. WiFi 6 AP - Discover WAX630E - NETGEAR Blog

Experience the power of 6GHz Wi-Fi 6E with Netgear's WAX630E access point. Unlock blazing-fast speeds, increased capacity, and enhanced performance for your business network. Learn more about this cutting-edge technology and its benefits for seamless connectivity and productivity

Expanded Portfolio for Residential Installers: Shop Now

Discover our expanded portfolio of products for residential installers. Find the best solutions for your clients' needs. Visit us today!

Tri-band WiFi 6E Access Point - Enhancing Wireless Networks

Learn about the Tri-band WiFi 6E Access Point and how it's enhancing wireless networks. NETGEAR offers cutting-edge solutions for your connectivity needs.

NETGEAR's Dual Band WiFi 6: Redefining Connectivity

Discover how NETGEAR's Dual Band WiFi 6 is redefining connectivity, offering faster speeds, increased capacity, and improved efficiency.

NETGEAR CES 2023 Innovation Awards Honorees - NETGEAR Hub

Discover the future of innovation with Netgear at CES 2023 Innovation Awards. Shop award-winning products for your home and office today!