Search results for: GS110EMX

GS110EMX Firmware Version 1.0.0.2 - NETGEAR Support

Known issue: Cable test does not work properly on multi-gig ports (port 9 and port 10) when no cable is connected or the length is less than 5 meter. Download Link: http://www.downloads.netgear.com/files/GDC/GS110EMX/GS110EMX_V1.0.0.2.zip Last Updated:07/07/2025 | Article ID: 000049342 Was this article helpful? Yes No

GS110EMX Firmware Version 1.0.0.9 - NETGEAR Support

Fixed Issues: LACP cannot work with device running with Windows server 2016 operating system. Possibility of unauthenticated web access through admin cookie leak. Weak cryptography of the admin password that is stored in the admin cookie. Device may reboot when under attack by certain malicious packets. Upgrade Procedure Below are the steps to upgrade the firmware via HTTP. For the other method, please check the IG and SW User Manual for details. Download the new firmware from NETGEAR product su...

GS110EMX Firmware Version 1.0.1.7 - NETGEAR Support

Security Fixes: Various security fixes and enhancements. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Download Link : https://www.downloads.netgear.com/files/GDC/GS110EMX/GS110EMX_V1.0.1.7.zip Firmware Update Instructions: Note: After upgrading firmware to v1.0.1.4 or newer version from a version prior to v1.0.1.4, current password will reset to default. To update your product’s firmware, follow the instructions in your product’s user manual....

GS110EMX Firmware Version 1.0.0.6 - NETGEAR Support

New feature: Added LACP(Link Aggregation Control Protocol) feature. Fixed Issues: Fixed the issue where the GS110EMX cannot be discovered by ProSAFE Plus Utility, UPnP or Bonjour. Upgrade Procedure Below are the steps to upgrade the firmware via HTTP. For the other method, please check the IG and SW User Manual for details. Download the new firmware 1.0.0.6 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to get the switch...

GS110EMX Firmware Version 1.0.0.7 - NETGEAR Support

Fixed Issues: Under IGMP Snooping page, Static Router Port number gets erased after just clicking the Apply button without making any configuration change. Upgrade Procedure Below are the steps to upgrade the firmware via HTTP. For the other method, please check the IG and SW User Manual for details. Download the new firmware from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to get the switch firmware image “GS110EMX_V1.0.0...

GS110EMX Firmware Version 1.0.1.4 - NETGEAR Support

Note: After downloading FW v1.0.1.1 to the switch, regardless of the current password, the switch’s password resets to the default. This helps address bug #2 in the Bug Fixes section. New Features and Modifications: The default admin password must be changed to a unique password during the first login. NSDP (System > Management > Discovery and Management) is now separated into NSDP Discovery and NSDP Management. NSDP Discovery is enabled, and NSDP Management is disabled, by default. Changed the ...

GS110EMX Firmware Version 1.0.2.3 - NETGEAR Support

Enhancements: Adds an option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol) under System > Management > Discovery and Management. Default is Disable. Security Fixes: Various security fixes and enhancements. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/ Warnings: Read and follow these warnings before updating your firmware: After upgrading firmware to v1.0.1.4 or a newer version from a version prior to v1.0.1.4, th...

GS110EMX Firmware Version 1.0.2.7 - NETGEAR Support

Enhancements: A new CPU version is supported. IGMP snooping is now disabled by default. Warnings Read the following warning before you update your firmware: If your switch is currently running a firmware version earlier than version 1.0.1.4 and you update the firmware to version 1.0.1.4 or a later version, your admin password is reset to the default password. Download Link: https://www.downloads.netgear.com/files/GDC/GS110EMX/GS110EMX_V1.0.2.7.zip Firmware Update Instructions: To update your pro...

GS110EMX Firmware Version 1.0.2.8 - NETGEAR Support

Enhancements: LLDP packets are now dropped instead of being forwarded. Warnings: Read the following warning before you update your firmware: If your switch is currently running a firmware version earlier than version 1.0.1.4 and you update the firmware to version 1.0.1.4 or a later version, your admin password is reset to the default password. Download Link: https://www.downloads.netgear.com/files/GDC/GS110EMX/GS110EMX_V1.0.2.8.zip Firmware Update Instructions: To update your product’s firmware,...

Security Advisory for Denial of Service on Some Switches, PSV-2018-0222 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a denial of service security vulnerability on the following product models: GS110EMX, running firmware versions prior to 1.0.0.9 GS810EMX, running firmware versions prior to 1.0.0.5 XS512EM, running firmware versions prior to 1.0.0.6 XS724EM, running firmware versions prior to 1.0.0.6 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR...

Security Advisory for Authentication Bypass on Some Smart Managed Plus Switches, PSV-2020-0305 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for an authentication bypass security vulnerability on the following product models: GS110EMX, running firmware versions prior to 1.0.1.7 GS810EMX, running firmware versions prior to 1.7.1.3 XS512EM, running firmware versions prior to 1.0.1.3 XS724EM, running firmware versions prior to 1.0.1.3 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NE...

Security Advisory for Sensitive Information Disclosure on Some Switches, PSV-2018-0612 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a sensitive information disclosure security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware version...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

Security Advisory for Missing Function Level Access Control on Some Switches, PSV-2018-0542 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a missing function level access control security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware ve...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

GS810EMX Firmware Version 1.7.1.3 - NETGEAR Support

New Features and Enhancements: New access control feature allows you to block or allow access based on IP addresses. Security Fixes: Various security fixes and enhancements. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known Issues: The cable test does not work properly on multi-gig ports (port 9 and port 10) when no cable is connected, or when the cable length is less than 5 meters. When a device running firmware v1.7.0.7 (or newer version) ...

GS810EMX Firmware Version 1.7.0.7 - NETGEAR Support

New Features and Changes: In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese. Change the followings to the VLAN feature: Add basic port-based VLAN. Remove PVID setting from basic 802.1Q VLAN. Add advanced 802.1Q VLAN. Add access control list. Known Issues and Limitations: Cable test does not work properly on multi-gig ports (port 9 and port 10) when no cable is connected or if the length is less than 5 meters. Once v1.7.0.7 (or newer version) is downgraded to de...

GS810EMX Firmware Version 1.0.0.1 - NETGEAR Support

New Features and Enhancements: Initial Release. Known Issue: Cable test does not work properly on multi-gig ports (port 9 and port 10) when no cable is connected or if the length is less than 5 meters. Download Link : http://www.downloads.netgear.com/files/GDC/GS810EMX/GS810EMX_V1.0.0.1.zip Last Updated:07/07/2025 | Article ID: 000053244 Was this article helpful? Yes No

GS810EMX Firmware Version 1.0.0.5 - NETGEAR Support

Issues Solved: Possibility of unauthenticated web access via a particular URL. Admin password is leaked in the returned error message for a particular HTTP request. Web GUI may not be accessible with certain malicious packet attack. Known Issue: Cable test does not work properly on multi-gig ports (port 9 and port 10) when no cable is connected or if the length is less than 5 meters. Download Link : http://www.downloads.netgear.com/files/GDC/GS810EMX/GS810EMX_V1.0.0.5.zip Last Updated:07/07/2025...

GS110EMX not tagging frames | NETGEAR Communities

I've had this switch for quite a while but haven't had a need to configure VLANs until now. I've started by moving all the ports to Vlan 2, and configuring...

GS110EMX & Livebox 7 | NETGEAR Communities

Hi, sorry for my poor english but i need help... I recently got a Livebox 7 from french operator Orange with a 10gb port.I've an old GS110EMX given by a...

GS110EMX Rack Mount replacement kit | NETGEAR Communities

Hello!I've managed to lose the rack mounting kit for my GS110EMX managed switch. I need to purchase a new set, but can't find which kit I need for a 19...

Speed LAG with 2 netgear switches GS110EMX and GS380EPP | NETGEAR Communities

Hi All, I recently got me a nice set of switches. Connected to the GS110EMX:NAS (Synology DS923+) with 10Gbit port to 10Gbit switch port,2x 1Gbit/s...

Surprisingly slow throughput on GigE ports of GS110EMX | NETGEAR Communities

I have a pair of NETGEAR GS110EMX switches, one connected via port 10 to the 2.5Gbps port of an Orbi RBRE960 router, and the second connected "back to...

pfSense VLAN with GS110EMX | NETGEAR Communities

Hello there. I am trying to get some pfSense VLANs set up. Two physical ports on my pfSense box are connected to GS110EMX Smart Switches. Is there any way to...

GS110EMX uplink to XS505M only 5gbit | NETGEAR Communities

(Sorry for the double post, I just realized I chose the wrong forum managed switches yesterday and can't delete my post now 🙁Could a mod please...

GS110EMX uplink to XS505M only 5gbit | NETGEAR Communities

Hello everybody! 👋Model: GS110EMX, Firmware: 1.0.2.7 My problem:If I connect my 10G TB3 ethernet adapter (on the 2nd floor of our house) to the...

Synology DS224 NAS and GS110EMX LACP mode not working | NETGEAR Communities

Hello, I have setup my new Synology DS224 NAS with LAN1 & LAN 2 ports for Link Aggregation in Synology Control Panel but on the Netgear Switch...

IPv6 on GS110EMX | NETGEAR Communities

Can a Netgear GS110EMX do both IPv4 and IPv6 passthrough or just IPv4? 

GS110EMX Link Aggregation with ASUS XT9 | NETGEAR Communities

I’m trying to set up link aggregation on my GS110EMX to an ASUS XT9.  I follow the instructions for the GS110EMX and the XT9.  The process seems to...

GS110EMX - Letter of Volatility | NETGEAR Communities

Hi, I am looking for a letter of volatility for the GS110EMX 8-Port Gigabit Ethernet Plus Switch. Thank you in advance!

Link two switches via 10g s3300 and GS110EMX possible? | NETGEAR Communities

Hello I have been given a second hand s3300 and was wondering if I bought a GS110EMX and ran a cat6a link from the 10g port on the GS110EMX to the s3300s 10g...

LACP link traffic levels on GS110EMX | NETGEAR Communities

I've got two ports on a  configured as a LACP LAG between the switch and my home broadband router, and I'm noticing that there's a huge difference in...

GS110EMX - 2 VLAN from the same switch: Loop issue? | NETGEAR Communities

Hi folks, I'm opening this discussion to be sure I'm not doing anything wrong.Long story short, my TV setupbox must be directly connected to the...

GS110EMX - Slow speed with NAS | NETGEAR Communities

Hello, I have this switch connected to a NAS. When the computer is connected directly to NAS I get close to 500MB sec. When connected via this switch...

GS110EMX Switches SBS installation | NETGEAR Communities

Hi everyone!I would like to use two of these devices side by side on a standard 19" server rack/ shelf.I can't find any information about hardware options,...

Newbi help needed with VLAN performance MS108EUP and GS110EMX | NETGEAR Communities

Just updated my home network by adding a NETGEAR MS108EUP and GS110EMX so I can have 2 VLAN's connecting my basement and upper floor with both my internet...

GS110EMX https support | NETGEAR Communities

Ok...this can't actually be true - I must be missing something - but I can't find where I can enable https on the GS110EMXThere's no way this switch doesn't...

HELP GS110EMX low Upload Speed when connecting at 2.5Gbps on ports 9 and 10 | NETGEAR Communities

Hi All, I hope someone can help and point me in the right direction even though I think this is a software/hardware bug (I hope I am wrong). First...

GS108MX Switch Unveiled: Modern Business Connectivity

NETGEAR is launching its latest unmanaged switch, the GS108MX, featuring one 10G/Multi-Gigabit Ethernet port for non-blocking uplink.

10 Gig Routers - Find Multi-Gig Home Network Tips

Now is the right time to invest in a future-proofed 10 Gig Router or Multi-Gig Mesh System. Unlock exciting new home networking technology.

Business IT Networking Articles - NETGEAR Blog

Discover how to get the most out of your business IT network with the latest technology and best practices. Learn More.