Search results for: GS108EP

GS108EP / GS108EPP Firmware Version 2.0.0.11 - NETGEAR Support

Release Date: June 29, 2026 New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Note: After you update to this firmware, the switch management page is only accessible from ports in VLAN 1, which is the default management VLAN. If you are accessing the switch from a port assigned to a different VLAN, you need to switch to a VLAN 1 port to regain access. Support for manual SNTP server configuration for system time synchronization. Sup...

GS108EP / GS108EPP Firmware Version 2.0.0.5 - NETGEAR Support

Enhancements: Initial release Bug fixes: Fixes the issue where the switch incorrectly forwards specific multicast traffic across different VLANs. Download Link: https://www.downloads.netgear.com/files/GDC/GS108EP/GS108EP_GS108EPP_V2.0.0.5.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation ...

GS108EP / GS108EPP Firmware Version 2.0.0.4 - NETGEAR Support

Enhancements: Initial release Warnings: Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the device as it is no longer supported from firmware version 1.0.4.4. Use NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight App to discover the switch at the same subnet. If you disable HTTP and a problem occurs with the HTTPS certificate of the switch, you might not be able to access the device UI. In this case, you must reset the switch to factory default settings to regain access ...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

GS308EPP Firmware Version 2.0.0.11 - NETGEAR Support

Release Date:July 7, 2026 New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Note: After you update to this firmware, the switch management page is only accessible from ports in VLAN 1, which is the default management VLAN. If you are accessing the switch from a port assigned to a different VLAN, you need to switch to a VLAN 1 port to regain access. Support for manual SNTP server configuration for system time synchronization. Suppo...

GS308EP Firmware Version 2.0.0.11 - NETGEAR Support

Release Date: June 24, 2026 New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Note: After you update to this firmware, the switch management page is only accessible from ports in VLAN 1, which is the default management VLAN. If you are accessing the switch from a port assigned to a different VLAN, you need to switch to a VLAN 1 port to regain access. Support for manual SNTP server configuration for system time synchronization. Sup...

GS308EPP Firmware Version 1.0.0.10 - NETGEAR Support

New Features: Support port mirroring from multiple ports. Warnings: Firmware files for GS308EP and GS308EPP are different. Be sure to download and install the correct firmware for your model. After upgrading to v1.0.0.7, the setting for Port LEDs on the home page will be incorrectly changed from ON to OFF, different from the actual Port LEDs on the front panel. To fix the issue, please reset the switch to factory default settings. Download Link: https://www.downloads.netgear.com/files/GDC/GS308E...

GS308EPP Firmware Version 1.0.1.1 - NETGEAR Support

Bug Fixes: Fixes an interoperability issue with the Hikvision camera, model DS-2CD2146G2-ISUI and model DS-2CD2046G2-IU, in which the camera might not receive PoE power from the switch. Warnings: Read and follow these warnings before updating your firmware: The firmware files for model GS308EP and model GS308EPP are different. Be sure to download and install the correct firmware for your model. After you upgrade the firmware to version 1.0.0.7, the settings for the port LEDs on the HOME page are...

GS108Ev3 Firmware Version 2.00.05 - NETGEAR Support

Bug Fixes: Made Flow Control configurable and its default setting is changed from enable to disable. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It could be anywhere from 300 to 600 seconds. IGMP host tim...

GS308EP Firmware Version 1.0.0.7 - NETGEAR Support

New Features and Enhancements: After the switch falls back to its default IP address (192.168.0.239), it continues to request a DHCP IP address every 5 minutes until: It acquires one from a DHCP server, Or, Is assigned a fixed/static IP address. Switch attempts to renew its DHCP lease when its IP address lease expires, as per RFC standards. Warnings: Firmware files for GS308EP and GS308EPP are different. Be sure to download and install the correct firmware for your model. After upgrading to v1.0...

GS308EPP Firmware Version 1.0.0.4 - NETGEAR Support

New Features and Enhancements: Initial Release Warnings: Firmware files for GS308EP and GS308EPP are different, please use the correct fie for your model. Download Link : https://www.downloads.netgear.com/files/GDC/GS308EPP/GS308EPP_V1.0.0.4.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentati...

GS108Ev3 Firmware Version 2.06.17 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Known Issues: To support the device UI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by device UI, and vice versa. IGMP dynamic router port does not timeout exactly at 300 seconds. It...

GS308EP Firmware Version 1.0.0.4 - NETGEAR Support

New Features and Enhancements: Initial Release Warnings: Firmware files for GS308EP and GS308EPP are different, please use the correct fie for your model. Download Link : https://www.downloads.netgear.com/files/GDC/GS308EP/GS308EP_V1.0.0.4.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation...

GS108Ev3 Firmware Version 2.00.08 - NETGEAR Support

Bug Fixes: Fixed the web GUI counter issue where Bytes Received and Bytes Sent (under System > Monitoring > Port Statistics) gets reset to zero after reaching 4294967295. Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be used by Web GUI and vice versa. IGMP dynamic router port does not timeout exactly at 30...

GS108PEv3 Firmware Version 2.06.08 - NETGEAR Support

V2.06.08 has 3 firmware images. Each supports a different language for the WEB GUI: English, German, and Japanese. The supported language is identified by the suffix of image filename: EN - English. GR - German (Deutsch). JP - Japanese (日文). New Feature: Add a new column to Port Status to display “Max MTU” supported by the device. Modification: Change Web GUI page title from “NETGEAR ProSAFE Plus Switch” to “NETGEAR GS108PEv3” Change production description from “ 8-Port Gigabit ProSAFE PLUS Swit...

GS308EP Firmware Version 2.0.0.5 - NETGEAR Support

Bug fixes: Fixes the issue where the switch incorrectly forwards specific multicast traffic across different VLANs. Known Issues: After you upgrade the firmware to version 1.0.0.7, the Home page in the device UI incorrectly displays the port LED settings as OFF, while the physical port LEDs on the front panel display as ON. Workaround: To fix this issue, reset the switch to the factory default settings. Download Link: https://www.downloads.netgear.com/files/GDC/GS308EP/GS308EP_V2.0.0.5.zip Firmw...

GS108PEv3 Firmware Version 2.06.16 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impacted if the rate is higher than the CPU can handle. Configuration obtained from the Plus Utility cannot be u...

GS108PEv3 Firmware Version 2.00.12 - NETGEAR Support

New Features and Enhancements: Implemented new and more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). WARNING: After GS108PEv3 are upgraded to FW version V2.00.12 or higher, it cannot work with Plus Utility version prior to V2.4.3. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Limitations: To support WEB GUI, all HTTP packets are forwarded to the embedded CPU. With Flow Control enabled, throughput will be impac...

GS308EP Firmware Update | NETGEAR Communities

On GS108EP software you could configure transfer rate to any value. The GS308EP only allows you to start with 512kb and up mb. Is there any way to the get...

Web firmware upgrade for GS108Ev3 failing | NETGEAR Communities

I wante to upgrade to version 2.00.05 but don't have a Windows machine handy. So I thought I'd use the web interface. After entering "loader mode" on...

GS108ev3 - Utility stops responding | NETGEAR Communities

Just purhcased a GS108Ev3 switch, and I was able to open up the ProSafe Plus Config utility and select the switch to assign an IP address.  The switch...

GS108Ev3 Firmware Upgrade Issues | NETGEAR Communities

This is still a problem. I bought the GS108E (v3) last week. I couldn't configure the switch using 192.168.0.239 (my PC has a static IP of 192.168.0.200). I...

GS108Ev3 Cannot set VLAN for management interface | NETGEAR Communities

I just purchased a GS108Ev3 because I needed some simple VLAN segregation for a small group of machines "down the hall" from my core networking equipment....

Weak wifi with Netgear GS108E | NETGEAR Communities

I get a very weak download speed on wifi after I plugged in my Netgear GS108E switch. I have a 100/10 (down/up) Mbit/s fiber connection. Have tried...

No Gigabit connection GS108Ev3 | NETGEAR Communities

Hi, recently I bought a GS108Ev3 to upgrade my GS105E. The problem is that I can't get a Gigabit connection on my laptop (Asus K52JC with JMicron...

Steam download overloads GS108Ev3 | NETGEAR Communities

Hello everyoneI'm using two GS108Ev3 to connect my devices. I also use 2 STB that provide TV (something like Netflix but from Switzerland). The on STB...

GS108E-v3 DHCP VLAN | NETGEAR Communities

I recently purchased this switch and was surprised to learn that when in DHCP client mode, it will pull an address from any device on any VLAN.I would have...

GS108E only accessible over default VLAN | NETGEAR Communities

Hello, is it possible to set the IP address of the device on a tagged Vlan instead of the native Vlan?I'd like to manage the Switch from behind a trunk...

GS105E, GS108E, and WG102, all in a VLAN - how? | NETGEAR Communities

I have a GS108E connecting 4 point of sale systems, linking to a GS105E connecting to a point of sale server and WG102 access point with 2 VLAN's on 2...

GS108E FW upgrade OK but no GUI | NETGEAR Communities

Hi,Just upgraded my new GS108E switch and updated the firmware from 1.00.09 to 1.00.12. Upgrade went fine and at 100% the reboot message came. Switch comes...

poe splitter works with GS108P but not with GS110TP | NETGEAR Communities

I have a (non netgear) POE splitter that work very well with my GS108P.But now I wanted to replace the GS108P with an GS110T, but it does not work. The POE...

GS108E Firmware Upgrade Issues | NETGEAR Communities

Hi,I recently tried to upgrade to v1.00.06 firmware on a GS108E I had purchased. However, I have been having severe problems trying to upgrade it and I fear...

PoE doesn't start_GS308EP | NETGEAR Communities

We use the GS308EP to manage 2 differents VLAN in our custom system. the port 1 is used to power on a RFID reader (FEIG MR102), the others ports are for...

Broken GS308EPP web gui after reverse proxy | NETGEAR Communities

Hello community, I put my switch GS308EPP behind a reverse proxy HTTP -> HTTPS on my Synology DS923+ which works well.Unfortunately, the errors come...

gs108v2 gs308ep DoS | NETGEAR Communities

I have both of those switches... The port turns off and has to be enabled to back on. The gs108v2 is connected to the gs308ep (poe is turned of on port...

GS308EP Won't Factory Reset | NETGEAR Communities

So I have been using a GS308EP for my network for a while. I set it and forgot it and didn't leave a management port open. I'm changing my network now, so I...

Netgear GS316EP reports as GS108EV3 after factory reset | NETGEAR Communities

We have an unused Netgear GS316EP 16 port switch.   During troubleshooting we were asked to factory reset the switch.  After factory reset it...

GS305EPP New Firmware But Not GS308EPP? | NETGEAR Communities

I see new firmware v2.0.04 for GS305EPP but not for GS308EPP.   I would think these run the same software.   Will new 2.0.0.4 firmware be...

Upgrade Your Surveillance With PoE - NETGEAR Hub

Read our blog on upgrading your surveillance with PoE switches. Learn more here.