Search results for: AXM761

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

S3300 / Smart M4300 Firmware Version 6.6.4.28 - NETGEAR Support

Bug Fixes Failed to set SNMP OID agentUserPasswordEncryptType Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: NMS300 does not support current firmware SFP+ model AXM765 cannot be used for 10G stacking. Workaround: Use other SFP+ models, such as AXM761, AXM762, AXM763, or use DAC cable AXC761/AXC763 instead. RPS/AC hot swap (quickly unplugging and plugging back in) sometimes does not take effect after reconnecting the APS1000W power cord. Workaround: Reconnect...

S3300 Firmware Version 6.6.4.9 - NETGEAR Support

New features and enhancements 10G SFP port fails to link up after device is rebooted. Fixed the problem where device may crash occasionally with the following task bcmATP-RX, unitMgrTask or spmTask, shown in the debugging log. Known issues SFP+ model AXM765 cannot be used as 10G stacking. [Workaround]: Use other SFP+ models AXM761, AXM762, AXM763 or DAC cable AXC761/AXC763 instead. RPS/AC hot swap sometimes (quickly unplug/plug) does not take effect after plug back APS1000W power cord. [Workarou...

What NETGEAR modules can I use in the ProSAFE 8-Port 10-Gigabit Ethernet Web Managed Switch (Model XS708Ev2)? - NETGEAR Support

The following NETGEAR modules are supported: AGM731 AGM734 The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 AMX764 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 Last Updated:07/07/2025 | Article ID: 30525 Was this article helpful? Yes No

Which optical modules do the SFP+ ports support on the XS716E? - NETGEAR Support

The XS716E comes with 1 SFP MSA socket that can be used with either Gigabit SFP or 10-Gigabit SFP+ optical modules. NETGEAR offers a complete line of SFP and SFP+ modules and DAC cables designed for this switch: AGM731F SFP Transceiver 1000BASE-SX AGM732F SFP Transceiver 1000BASE-LX AGM734 SFP Transceiver 1000BASE-T AXM761 SFP+ Transceiver 10GBASE-SR AXM762 SFP+ Transceiver 10GBASE-LR AXM763 SFP+ Transceiver 10GBASE-LRM AXM764 SFP+ Transceiver 10GBASE-LR Lite AXC753 SFP+ XFP DAC Cable AXC761 SFP...

S3300 / Smart M4300 Firmware Version 6.6.4.26 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: When the FW is upgraded to v6.6.4.26 and the switch is rebooted, sometimes the switch does not complete the boot-up process, and the power LED remains yellow. Workaround: Do a power cycle to the S3300 manually. SFP+ model AXM765 cannot be used for 10G stacking. Workaround: Use other SFP+ models, such as AXM761, AXM762, AXM763, or use DAC cable AXC761/AXC763 instead. RPS/AC hot-swap (quickly unplugging and pluggi...

What NETGEAR modules can I use in the ProSAFE 10-Gigabit Ethernet Smart Managed Switches (Models XS708T, XS712T, XS716T, XS728T, and XS748T)? - NETGEAR Support

The following NETGEAR modules are supported: AGM731F AGM732F AGM734 The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 (XS708T, XS712T, XS716T only) AXM764 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 Last Updated:07/07/2025 | Article ID: 30529 Was this article helpful? Yes No

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

What NETGEAR modules can I use in the ReadyDATA 5200 10 gigabit ports? - NETGEAR Support

The ReadyDATA 5200 has 2 x 1 gigabit Ethernet ports and 2 x 10 gigabit SFP+ ports. The 2 x 10 gigabit SFP+ ports only support 10 gigabit SFP+ modules and direct-attach cables. These ports do not support gigabit or fast Ethernet SFP modules or 10 gigabit XFP modules. The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 AXC753 (this cable is an SFP+ to XFP direct-attach cable; the SFP+ end connects in th...

What cables or modules can I use for my 10 Gigabit ports on my ReadyNAS? - NETGEAR Support

ReadyNAS 716X and ReadyNAS 4220X with 2x 10Gbit Copper Use Category 6 (cat-6) rated network cables (or higher) to achieve 10 Gigabit performance ReadyNAS 4220S and ReadyNAS 4200 with 2x 10Gbit SFP+ (RN12Sxxxx) These ports are SFP+ ports and do not support either SFP (Gigabit) modules or SFP direct-attach cables. The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 AXC753 (This is an SFP+ to XFP direct-...

What NETGEAR SFP and SFP+ modules can I use in NETGEAR XS505M and XS508M Switches? - NETGEAR Support

The XS505M and XS508M support the following SFP and SFP+ modules: Module Description AGM731 SFP Transceiver 1000BASE-SX (Short range, multimode) AGM732F SFP Transceiver 1000BASE-LX (Long range, single mode) AGM734 SFP Transceiver 1000BASE-T Copper RJ45 GBIC AXC761 10GSFP+ Cu (passive) SFP+ to SFP+ Direct Attach Cable 1m AXC763 10GSFP+ Cu (passive) SFP+ to SFP+ Direct Attach Cable 3m AXM761 10GBASE-SR SFP+ GBIC (OM3/OM4 Multimode) AXM762 10GBASE-LR SFP+ GBIC (Single mode) AXM763 10GBASE-LRM SFP+ ...

GS728TS / GS752TS / GS728TPS / GS752TPS Firmware Version 5.3.0.36 - NETGEAR Support

Bug Fixes: GUI page for LLDP can be opened with a URL without logging in to the switch. Notes: SNMP community with public or private community string will be removed. To configure SNMPv3, the Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. Smart Control Center (SCC) is set to Disabled by default. The SCC Utility can still discover the switch even if SCC is disabled. NETGEAR 10G SFP+ modules AXM761/762/763 can be used f...

GS728TS, GS752TS, GS728TPS and GS752TPS Firmware Version 5.3.0.31 - NETGEAR Support

Bug Fixes: Multicast packet with destination MAC address of 01:80:c2:00:00:1c and Ethernet type of 0x88CC causes loop in properly converged STP topology. Debugging URL of ‘devshell’ is accessible without authentication. Fiber port 50 goes down when copper port47/port48 links up. Cannot access switch via HTTPS when using the certificate generated by the switch. Notes: The released zip contains switch firmware (gs7xxts_tps-v5.3.0.31.stk) and MIB files. Please unzip the file to extract the switch i...

S3300 Firmware Version 6.6.4.7 - NETGEAR Support

New features and enhancements Support mixed stacking between S3300 series and two 10G models from M4300 series (M4300-24X or/and M4300-12X12F). Add configurable option to disable/enable Smart Control Center (SCC) Utility under GUI page of ‘Security > Management Security > SCC Control’. Add configurable option to select different HASH algorithms for LAG under GUI page of ‘Switching > LAG > LAG Configuration’. Please find detailed description on the S3300 User Manual of firmware 6.6.6.4. Specifica...

S3300 / Smart M4300 Firmware Version 6.6.4.25 - NETGEAR Support

New Features and Enhancements: Transport Layer Security (TLS) v1.2. Improve the LOG message to indicate the reason for login failure. Bug Fixes: Looking up MIB object identifier (OID) 1.3.6.1.4.1.4526.11.1.2.15.9.1.5 does not return correct Spanning Tree (STP) status. Fixed issue where the switch sometimes reset when configuring the DNS server. Known Issues: When the FW is upgraded to v6.6.4.25 and the switch is rebooted, sometimes the switch does not complete the boot-up process, and the power ...

Which smart switches support 10G SFP+ slots and which optical modules can you install in an SFP+ slot? - NETGEAR Support

The GS728TXS, GS752TXS and XS712T smart switches support 10G small form-factor pluggable (SFP+) slots in which you can install optical modules: GS728TXS and GS752TXS. Support four SFP+ slots, two of which you can configure for either a 10G uplink or 10G stacking. XS712T. Supports two SFP+ slots that function as combo ports in which you can install10G Fiber or copper optical modules. You can use the SFP+ slots on the GS728TXS, GS752TXS, and XS712T to install either Gigabit SFP optical modules or ...

GS728TS / GS752TS / GS728TPS / GS752TPS Firmware Version 5.3.0.35 - NETGEAR Support

Bug Fixes: For compliance with California state law, the default “password” must be changed after logging into the switch. To configure SNMPv3, the Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. If you upgrade firmware to V5.3.0.35 from an older version, you can clear your temporary Internet files or browser cache to see the new settings. Add a new option under Security > Management Security > SCC Control to disable o...

S3300 / Smart M4300 Firmware Version 6.6.4.21 - NETGEAR Support

New Features and Enhancements: Default password must be changed when you log in to the switch for the first time. To configure SNMPv3, the authentication protocol must be configured as MD5 or SHA. The None option for the authentication protocol is no longer allowed. Changed the default setting of the Smart Control Center (SCC) management from enabled to disabled. Note: The SCC Utility can still discover the switch. Bug Fixes: Unable to set the end time of the PoE timer to mid-night (00:00). Cann...

GS728TS, GS752TS, GS728TPS and GS752TPS Firmware Version 5.3.0.29 - NETGEAR Support

Modifications: Added error handling enhancement to prevent system from hanging caused by potential memory issue. Bug Fixes: Ports list cannot not be displayed under Port Mirroring page when the stack consists of 5 or more units. Stack crashes or freezessometimes when the network has lots of 802.1X broadcast traffics, while 802.1X is disabled on the system. Switch reboots every few hours when it is monitored by SSL Security Check sensor from PRTG network monitoring software. VoIP Phones change VL...

How do I configure a 100 Gbps QSFP28 port on an M4350 switch to function as four individual 10 Gbps interfaces? - NETGEAR Support

This document explains how to configure a 100G QSFP28 port on an M4350 switch to operate in breakout mode, allowing it to function as four individual 10G interfaces. Configuring a 100G port in breakout mode enables connectivity to multiple 10G devices using a single QSFP28 uplink port. If all supported 100G ports are configured in breakout mode, the switch can provide up to 16 additional 10G interfaces (model dependent). Requirements: The following components are required: 100G QSFP28 transceive...

Connecting MS510TXPP to XS505M via AXM761 SFP+ | NETGEAR Communities

Hi, I've got a MS510TXPP and I'm trying to connect it to an XS505M via two AXM761 SFP+ modules. I've got an existing fiber cable ran between two...

AXM761 limited 5 year warranty query | NETGEAR Communities

Hey,   I have developed a fault with one of our AXM761 10gig tranceivers. I have confirmed it is the tranceiver by swapping it with known working...

Trying to get AXM761 in a M4300 to work with a TP-Link MC200CM Media Converter | NETGEAR Communities

Hello,iam trying to get my Fiber to work. On the one side there is a M4300-52G-PoE+ and on the other side a TP-Link MC200CM Mediaconverter.The Converter is 1...

7000 series CLI Commands | NETGEAR Communities

Hello,We have recently deployed an XSM7224S and serveral GSM7252PS switches, connected together with OM3 fiber and AXM761 GBIC modules.We're having some...

LAG with SFP+ not working | NETGEAR Communities

I have 2 switches (XS512EM and XS724EM) each with 2 AXM761 SFP+ modules and would like to connect them via LAG. The LAG works with copper cables, it does not...

Netgear-brand SFP+ Bi-directional Transceivers? | NETGEAR Communities

I have just finished integrating a small/building-scale multimode (OM3) fiber backbone using Netgear 4300-series switches. I am using Netgear AXM761...

Transceiver compatibility | NETGEAR Communities

Hello,Is the Netgear 10GBASE-SR AXM761 SFP+ Transceiver compatible with the M4300-24x24F switch ? It should be but I only see in the product overview...

Fiber Connection | NETGEAR Communities

Have a GS752TXS w/ 4 10G fiber connections and a GS728TX-100NES w/ 2 10G fiber connections,  both using AXM761 modules.   On the GS752, port 49 is...

M5300-52G-POE+ // Port does not come up - Port programming failed with error 0x1 for event OPERATION | NETGEAR Communities

Hi Community, I have a GSM7252PS switch which worked fine for some months now.Since a few days the 10GBit/s uplink (via SFP AXM761) isn't...

Cable test for SFP+ optical modules | NETGEAR Communities

Hi All, We have two XS708e installed in our collocation provider rack. We have installed into 8th port of the switches AXM761 SFP+ modules and...

AXM765v2 SFP+ supported on MS510TX(PP) | NETGEAR Communities

We are using the MS510TXPP switch, firmware 6.7.0.52 with a SFP+ port. According to the datasheet of the MS510TXPP this switch supports the AXM765...

10GBase-T AXM765 problem with Tricaster NDI | NETGEAR Communities

Hi,I have a problem with a M4250-26G4XF-POE+ switch and a AXM765 copper 10GbaseT SFP+.In particular i connected it to a TC2 (and TC1) Tricaster via 10Gb...

connecting GS728TXS and GC728XP with AXC761 | NETGEAR Communities

Hello,I want to connect my two switches (GS728TXS and GC728XP) to work as one.Simply plugging the AXC761-cable into some 10G-ports does not work.I need some...

AXM764 on M4300-52G | NETGEAR Communities

Just confirming that the AXM764 plays well with the M4300-52G: From the product...

AXM762 APC/UPC? | NETGEAR Communities

Hi folks, I'm trying to figure out which fiber patch cables I need for a new M4300 setup using AXM762 SFP+ modules, and coming up short on whether...

AXM765 SFP+ with Nighthawk R9000 | NETGEAR Communities

Hi All,Is the Netgear AXM765 SFP+ now compatible with Netgear R9000. The list is not updated and I have no idea if the RJ45 transceivers can work with the...

SFP+ Module AXM765 compatible with GS728TXS | NETGEAR Communities

Hallo,   does it work? Is not specified in the documention.   Thank you and best regards    

Module AXM763 (10 Gigabit Base-LRM) and mode-conditioning cable | NETGEAR Communities

Hello,   I read some docs that says 10 Gigabit Base-LRM requires mode-conditioning patch cords when used in a 62.5/125 multimode fiber. Is it a...

Compatibility for AXM763 (10Gbic module) | NETGEAR Communities

Does this module AXM763 compatble with GS724Tv4 ?I want to link it with a M4300-28G ProSAFE 24-port 1G and 2-port 10GBASE-T and 2-port 10G...

Does the AXM763-10000S fiber module work with the XS708Ev2 switch | NETGEAR Communities

Does the AXM763-10000S fiber module work with the XS708Ev2 switch? In one accessory list it shows that it works with this switch, in another it shoes that it...

DC Montessori School Chandigarh - Case Study - NETGEAR Blog

DCM School Chandigarh has upgraded its network with NETGEAR Business, improving speed, reliability, and security for staff and students.

Newegg’s Premier Gaming Arena Runs Flawlessly on NETGEAR Networking Technology - NETGEAR Blog

NETGEAR M4350 and WiFi 7 power Newegg’s Gamer Zone for seamless gaming, streaming, and live production.

COEP's Technological University builds on its heritage of excellence with world-class campus-wide networking - NETGEAR Blog

COEPS Technological University builds on its heritage of excellence with world-class campus-wide networking

IT Supervision Solutions - Enhance Network Management

Partnering for reliable, high-speed, and secure connectivity based on the NETGEAR Total Network Solution