Search results for: GSS116E

GSS116E Firmware Version 1.6.0.5 - NETGEAR Support

New feature and modifications: Added “Auto” detection mode for language selection. With Auto mode, the switch will display English, German (Deutsch) and Japanese (日本語) automatically based on the language of the browser. Notes: Firmware upgrade will fail if using web browser to perform the upgrade from v1.0.0.0. Please connect your computer with Plus Utility directly to your GSS116E and use Plus Utility to perform the upgrade. Firmware upgrade will fail if using web browser to perform the upgrade...

GSS116E Firmware Version 1.6.1.4 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. Warnings: Read and follow these warnings before updating your firmware: The procedure to update the firmware differs depending on the current firmware version running on your GSS116E. You also may be prompted to update the boot loader. Failure to follow the correct procedure can cause the switch to become inoperable. Firmware Update Instructions: Choose the procedure for the firmware version and boot loader version currently installed on the switch...

GSS116E Firmware Version 1.0.0.5 - NETGEAR Support

New feature: Added a Switch Management Mode on the Web GUI to allow user to choose to manage the switch from Web browser only or from both Web browser and Plus Utility. Modifications: Fixed the vulnerabilities of cross-site Scripting (XSS) and cross-site request forgery (CSRF) attacks. Implemented more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). WARNING: There was an issue on v1.0.0.0. VLANs and Link Aggression stop working when GSS116E is booted up ...

GSS116E Firmware Version v1.0.0.5 - NETGEAR Support

New feature: Add a Switch Management Mode on the Web GUI to allow user to choose to manage the switch from Web browser only or from both Web browser and Plus Utility. Modifications: Fix the vulnerabilities of cross-site Scripting (XSS) and cross-site request forgery (CSRF) Implement more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). If your GSS116E firmware version is V1.0.0.0: You can use the ProSAFE Plus Utility to update to the new firmware version ...

GSS116E Firmware Version 1.0.0.2 - NETGEAR Support

Bug Fixes: Fixed the issue where the VLAN and Link Aggression stop working when firmware is being upgraded. Download Link: http://www.downloads.netgear.com/files/GDC/GSS116E/GSS116E_V1.0.0.2.zip Last Updated:10/17/2025 | Article ID: 000038412 Was this article helpful? Yes No

GSS116E Firmware Version v1.0.0.0 (Initial Release) - NETGEAR Support

New feature: Initial release. I understand the instructions provided and will upgrade accordingly. I am ready to download the firmware. Download Firmware Last Updated:07/07/2025 | Article ID: 000063897 Was this article helpful? Yes No

GSS116E Firmware Version 1.6.0.3 - NETGEAR Support

New feature and modifications: In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese (日文). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). If your GSS116E firmware version is V1.0.0.0: You can use the ProSAFE Plus Utility to update to the new firmware version V1.6.0.3. Follow these steps: Use the ProSAFE Plus Utility to update the switch to version V1.6.0.3. After completing the firmware update, ...

GSS116E Firmware Version v1.0.0.2 - NETGEAR Support

Issue fixed: VLAN and Link Aggression stop working when firmware is being upgraded. I understand the instructions provided and will upgrade accordingly. I am ready to download the firmware. Download Firmware Last Updated:07/07/2025 | Article ID: 000063896 Was this article helpful? Yes No

GSS116E Firmware Version 1.6.1.3 - NETGEAR Support

New Features and Enhancements: To comply with California state law, this new firmware requires you to change the default password after using it access the local browser UI. Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only. Security Fixes: Fixes security vulnerability. PSV-2019-0200 For more information about security vulnerabilities, visit https://www.netgear.com/about/security Firmware Update I...

GSS116E Firmware Version 1.6.0.9 - NETGEAR Support

New Feature: Add a new column to Port Status to display “Max MTU” supported by the device. Modification: Change Web GUI page title from “NETGEAR ProSAFE Click Switch” to “NETGEAR GSS116E” Change production description from “ProSAFE 16-Port Gigabit Click Switch“ to “16-Port Gigabit Ethernet Smart Managed Plus Click Switch” on the Web GUI In the help section of web GUI, the links to Documentation and Support now point directly to the product support page Security Fixes: Fixes security vulnerabilit...

GSS116E Firmware Version v1.0.0.6 - NETGEAR Support

Fixed issue: After the firmware is upgraded to V1.0.0.5, there is a chance that the configuration setting cannot be saved. WARNING: There was an issue with v1.0.0.0. VLANs and Link Aggression stop working when GSS116E is booted up and when the firmware is being upgraded from v1.0.0.0. The issue is fixed in v1.0.0.2 or newer versions. Once you upgrade your firmware to v1.0.0.5 or newer, you will no longer be able to use the ProSAFE Plus Utility versions prior to v2.4.3 to manage your GSS116E Clic...

GSS116E Firmware Version v1.6.0.5 - NETGEAR Support

New feature and modifications: Add “Auto” detection mode for language selection. With Auto mode, the switch will display English, German (Deutsch) and Japanese (日文) automatically based on the language of the browser. If your GSS116E firmware version is V1.0.0.0: You can use the ProSAFE Plus Utility to update to the new firmware version V1.6.0.5. Follow these steps: Use the ProSAFE Plus Utility to update the switch to version V1.6.0.5. After completing the firmware update, open a web browser and ...

GSS116E Firmware Version 1.0.0.6 - NETGEAR Support

Bug Fixes: After firmware is upgraded to V1.0.0.5, there is a chance that configuration setting cannot be saved. WARNING: If using web browser to perform the upgrade from v1.0.0.0 will fail. Please use Plus Utility to perform the upgrade. If using web browser to perform the upgrade from v1.0.0.2 will fail the first time. Please upgrade the firmware again using the same web browser or use Plus Utility to perform the upgrade. There was an issue with v1.0.0.0. VLANs. Link Aggression stops working w...

GSS116E Firmware Version 1.6.1.7 - NETGEAR Support

Enhancements: Adds an option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode. The default is Disabled. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security Warnings: Read and follow these warnings before updating your firmware: The procedure to update the firmware differs depending on the current firmware version running on you...

GSS108E / GSS116E Product FAQs - NETGEAR Support

What are GSS108E and GS116E? They are ProSAFE 8-port and 16-port Gigabit Click Switches. , offering the same software features as Plus Switches. What is the key difference between NETGEAR Click Switch and NETGEAR Plus Switch? Click switch offers the innovative 1-2-3-4 mounting system which gives you the flexibility to place the Click Switch in locations where other switches will not go. Whether it's directly on a wall, strapped to a pole, under the meeting table in a conference room or in a serv...

ProSAFE Plus Configuration Utility v2.3.5 - NETGEAR Support

New Features and Enhancements: Updated OpenSSL library to version 0.9.8ze Updated Adobe AIR to version 17.0.0.124 Bug Fixes: Removed wording (One-to-One) from GSS116E Port Mirroring page (System > Monitoring > Mirroring) since it can support many-to-one port mirroring Fixed the issue where GS105Ev2 & GS105PE configuration saved by web GUI cannot be restored via ProSAFE Plus Configuration Utility, and vice versa. Note: GS105Ev2 & GS105PE FW need to be v1.4.0.2 and later version. Notes: If this er...

Which NETGEAR Smart Managed Plus Switches offer firmware in multiple languages? - NETGEAR Support

The following NETGEAR Smart Managed Plus Switches offer firmware in German and Japanese: GS108Ev3 GS108PEv3 GS116Ev2 GSS116E JGS516PE JGS524Ev2 JGS524PE XS708Ev2 XS716E For more information, see the following knowledge base articles: How can I change my user interface to Japanese or German for my NETGEAR Smart Managed Plus Switch that requires localized firmware? How can I change my user interface to Japanese or German for my NETGEAR Smart Managed Plus Switch that supports multi-language firmwar...

Security Advisory for Authentication Bypass on ProSAFE Web Managed Switches, PSV-2015-0043 - NETGEAR Support

NETGEAR is aware of a security issue that can allow an attacker to bypass authentication on some models of NETGEAR Web Managed Switches and gain access to a switch’s configuration file and password. This vulnerability only occurs when an attacker is on the same subnet as the switch. This vulnerability affects the following products: JGS516PE JGS524Ev2 JGS524PE GS105Ev2 GS105PE GS108Ev3 GS108PEv3 GS116Ev2 GSS108E GSS116E XS708Ev2 XS716E Firmware fixes are currently available for all affected prod...

Security Advisory for Insecure SOAP Access in ProSAFE Plus Configuration Utility, PSV-2017-1997 - NETGEAR Support

NETGEAR is aware of a security issue in the ProSAFE Plus Configuration Utility that allows an unauthenticated user to change settings on NETGEAR switches that the ProSAFE Plus Utility can configure. This insecure Simple Object Access Protocol (SOAP) access vulnerability can only be exploited from a computer on the local network and must be exploited while the utility is running. This vulnerability is present in the following utility versions: ProSAFE Plus Configuration Utility versions earlier t...

Security Advisory for Sensitive Information Disclosure on Some Switches, PSV-2018-0612 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a sensitive information disclosure security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware version...

IEEE 802.3ad on GSS116E as advertised? | NETGEAR Communities

The new GSS116E switch (not old GS116E) is advertised as supporting IEEE 802.3ad link aggregation standards.Note that my Synology NAS does not support the...

gss116E Disable Spanning Tree Protocol (STP) and forward Bridge Protocol Data Units (BPDUs) | NETGEAR Communities

Google recommends that I disable Spanning Tree Protocol (STP) and forward Bridge Protocol Data Units (BPDUs) when STP is disabled when I use a switch with...

Can't get to GSS116E Switch after backhauling Google Nest Wifi Pro Setup | NETGEAR Communities

I recently connected my Google Nest WiFi Plus setup via a backhaul wiring and everything seems to be working correctly. However, I no longer have access...

Sudden failure on GSS116E (new) | NETGEAR Communities

Hi Everyone,I've got one of these switches.  Similar to other users, today, it's suddenly gone dark and wont power on.  I have power-cycled the...

GSS116E Power Failure | NETGEAR Communities

Woke up this morning and the power was out on my GSS116E.  It was working fine last night when I went to bed.  I unplugged it and plugged it back...

GSS116e switch - management console ip reverts to default after week | NETGEAR Communities

Hi there, I have a few managed switches model GSS116e.  They are all current bootloader+firmware (1.0.0.5+1.6.1.7). The router has DHCP...

GSS116E spontaneously resets its IP address | NETGEAR Communities

Ever few months, my switch spontaneously resets its managememnt address to its default of 192.168.0.239 and I have to manually reconfigure it to use DHCP....

Hello, I am in need of a letter of volatility for a GSS116E | NETGEAR Communities

I'm looking for a statement of volatility which explain the existence and use of Volatile and Non-Volatile memory on a GSS116E, and whether or not any of...

Sudden failure on GSS116E | NETGEAR Communities

Hi all, I've got one of these switches, that has been humming along without issue for ages.Today, it's suddenly gone dark - power LED is lit, but...

GSS116E: Unable to upgrade Bootloader | NETGEAR Communities

I have successfully updated the firmware on my GSS116E to the latest version (1.6.1.7) but i am unable to upgrade the bootloader to the latest version...

Firmware for GSS116E | NETGEAR Communities

Does anyone have a link for V1.0.0.5 or V1.0.0.6 firmware for the GSS116E managed switch?  I know it's not the most recent version, but I need to...

GSS116E unable to update firmware either directly using current ProSafe Plus Utility or web browser | NETGEAR Communities

Unable to update GSS116E with new firmware file using ProSafe Utility 2.7.8 or by logging in with web browser ( FireFox or IE). The firmware file...

gss116e Unable to configure | NETGEAR Communities

When I try to configure, I get the following message "the switch and manager IP address are not in the same subnet.  How do I fix this?

Can't run firmware update on GSS116E - TFTP Timeout | NETGEAR Communities

Hello, i have a GSS116E with firmware v1.0.0.0 and want to upgrade to the latest version v1.6.1.3. Trying it through the Pro Safe Utility 2.7.8. it...

GSS116E lost access via browser and prosafe utility | NETGEAR Communities

After upgradingsystem to:prosafe utility 2.7.7Firmware from 1.0.0.0 to 1.6.1.3 Lost complet access to switch. Prosafe utility says that access was...

WAC510 Multiple SSID on separate VLAN using Smart Switch GSS116E | NETGEAR Communities

First - I am new to VLAN setup and smart switch configuration, though I have some background and understand the goal and purpose of them.  My...

GSS116E locking tab problem | NETGEAR Communities

The locking tab assembly came off and I can't seem to know how to put the spring back so that it can work. Does anyone know how the spring fits in with the...

GSS116E unable to upgrade firmware from 1.0.0 to any available firmware | NETGEAR Communities

Hello, I was trying to update my Netgear GSS116E switch from firmware version V1.0.0.0 to the current version (as of this time, this seems to be...

GSS116E: unable to upgrade bootloader after firmware upgrade | NETGEAR Communities

Hi,After Upgrading my GSS116E - ProSAFE 16-port Gigabit Click Switch from Firmware version v1.0.0.0 to  v1.6.0.3 via the Plus Utilitywhen I call the web...

GSS116E Firmware upgrade Fail from 1.0.0 unable to upgrade firmware | NETGEAR Communities

So i decided to upgrade my switch firmware today as it was still on the base 1.0.0.0 version Following the instructions on the website i downloaded the...