Search results for: GS728TPv3

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.41 - NETGEAR Support

Release Date: July 7, 2026 Bug Fixes: Fixes the issue where the switch becomes unreachable after renewing its DHCP-assigned IP address if the DHCP server is temporarily unavailable during lease renewal. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports might not display. Workaround: perform a cable test for a single port on the switch through Insight. After you change the IP address of the switch, it might take around 6 minutes to...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.1.11 - NETGEAR Support

Release Date: July 7, 2025 New Features and Enhancements: Support for the UI Dark Theme Support for DHCP servers and DHCP relays. Support for HTTP, instead of TFTP, to improve reliability Support for 16 allowed LLDP neighbors per port Increased the maximum supported password length to 64 characters Reduced the query response time when polling SNMP MIB Removed the Diffie-Hellman key exchange algorithms that might pose security concerns. Bug Fixes: Fixes the issue where the GS752TPv3 and GS752TPPv...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.19 - NETGEAR Support

Enhancement: When you change to the NETGEAR Insight mode for the first time, the device IP address and VLAN settings are now kept instead of being reset to default values. Bug fixes: The switch cannot be accessed if DHCP server assigns an IP in the range of 192.168.0.x. The switch cannot be accessed after assigning a static IP through Insight. Known issues: Some port results are not displayed when doing all ports Cable Test via Insight. It will take around 10~15 minutes to update IP address at D...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.25 - NETGEAR Support

New features: Support for the Protected Port feature through Insight cloud management. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.netgear.com/files/GDC/GS728TPPv3/GS728TPv3_GS728TP...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.24 - NETGEAR Support

Bug Fixes: Fixes the issue where the switch stops forwarding all multicast control packets after any of the ARP table entries ages out. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.n...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.13 - NETGEAR Support

Bug Fixes: Fixes the issue where connecting a computer to an IP phone’s LAN port causes the switch to remove the voice VLAN, resulting in a 30 second loss of call audio. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports may not display. After you change the IP address of the switch, it may take 10 to 15 minutes to update the IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.0.36 - NETGEAR Support

Enhancements: You can now use the new NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight app to discover the switch in the same subnet. The NDT supports UPnP, which is now the preferred method of discovery. Bug Fixes: Fixes the issue where the switch sends incorrect VLAN port members to the SNMP manager. Known issues: When performing a cable test for all ports on the switch through Insight, results for some ports may not display. After changing the IP address of the switch, it may take 1...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.16 - NETGEAR Support

New Features: PoE self-healing reboots a connected powered device if the PD becomes unresponsive. Bug fixes: The PVID setting cannot be cleared by clicking the Clear button. The registration link on the GUI is incorrectly using the URL for Insight portal website. An untranslated "Apply" button on some German and Japanese UI pages doesn’t work. Enabling Auto-DoS does not automatically select all DoS options. SNMPv3 doesn't work after you log in with a newly configured password. Known Issues: The ...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.12 - NETGEAR Support

Bug Fixes: Fixes the issue where the management VLAN ID may be overwritten with the default value on a trunk port when you manage the switch through Insight. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports may not display. After you change the IP address of the switch, it may take 10 to 15 minutes to update the IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Wa...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.31 - NETGEAR Support

Features and Enhancements: Addition of bidirectional synchronization of the configuration settings between Insight and the device UI Addition of online checks for new firmware updates Insight management mode is now enabled by default Update to the Dashboard page in the device UI Known issue: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP addres...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.0.15 - NETGEAR Support

New Features: New responsive user interface (UI) that can adjust to the size of your screen Auto-Camera VLAN Auto-WiFi VLAN Known Issues: The admin page is not reachable if the switch is in a 192.168.0.0 subnet and obtains an IP other than 192.168.0.239. Workaround: Set a DHCP reservation for the switch so that it obtains the IP address 192.168.0.239. If there are multiple switches, then isolate each switch from the network, access each switch at the default IP address 192.168.0.239 and configur...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.22 - NETGEAR Support

New Features: Supports the management of DHCP snooping and L2 relay through Insight. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The D...

NMS300 Software Version 1.7.0.20 - NETGEAR Support

New Features: This version supports the following new switches: GS724TPv3 and GS724TPPv3 GS728TPv3, GS728TPPv3, GS752TPv3, and GS752TPPv3 Bug Fixes: Fixes the issue where you cannot download a configuration file from the switch via the NMS300. Fixes the issue where you cannot update firmware from the NMS300. Security Fixes: This software addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known Issue: Any type of ...

I cannot access the admin page of my NETGEAR Smart Switch; what do I do? - NETGEAR Support

This article applies only if your network uses a 192.168.0.0 subnet and only to the following NETGEAR smart switches and firmware versions: GS724TPv3: Firmware 6.2.0.16 and below. GS724TPPv3: Firmware 6.2.0.16 and below. GS728TPv3: Firmware 6.2.0.16 and below. GS728TPPv3: Firmware 6.2.0.16 and below. GS752TPv3: Firmware 6.2.0.16 and below. GS752TPPv3: Firmware 6.2.0.16 and below. MS324TXUP: Firmware 1.0.0.25 and below. If you are unable to access the admin page of your smart switch and your netw...

Bi-Directional Sync on Insight-managed Smart Switches with Insight - NETGEAR Support

Insight bidirectional synchronization instantly updates the Insight cloud whenever you change settings through the device UI. If a local change affects only the switch, Insight synchronizes the change immediately. If the change affects the entire Insight network configuration, Insight does not synchronize the change. Instead, Insight sends a notification indicating that the network-level configuration changed on a specific device. The next time the switch restarts, Insight overrides the local ch...

NETGEAR Insight Cloud Portal and App version 7.4 - NETGEAR Support

< Insight 7.5 Insight 7.3 > NETGEAR Insight Cloud Portal version 7.4 version 7.4.2 Version 7.4.4 Version 7.4.2 Release Date: June 15, 2024 New Features: Adds support on the PR60X and PR460X Pro Routers for OpenVPN at the device level, VLAN DHCP options 15 and 42, and VPN client access control, including support for multiple subnets. Adds support for RF profiles as well as default and newly defined customer profiles for ProAV and IT deployments. Add support for instant synchronization of local UI...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

Nec SV8100 Phone System and GS728TP v3 QOS | NETGEAR Communities

I am needing help setting up my GS728TP and GS748Tv3 Switch Settings so that they will pass the Nec SV8100 Phone System packets. My issue is that I have a...

VLAN help | NETGEAR Communities

Hello,Ive been searching for some time and trying to get the better of understanding vlan of my GS728TPV3 switch.I cant seem to understand how this should...

S3300-28X EOL replacement | NETGEAR Communities

The&nbsp;S3300-28X is about EOL, original i would like to have the&nbsp;GS728TPv3&nbsp; as the replacement. Everything looks good but if found that the...

GS724TPv3 The switch loses IP connection about 1 time in 5 days. | NETGEAR Communities

Hi,&nbsp;I have Netgear switch GS724TPv3, newest firmware installed&nbsp;The switch loses IP connection about 1 x every 5 days.&nbsp;I don't know...

GS724TPV3 wide open? | NETGEAR Communities

Hey there, I bought a GS724TPV3 just for the POE functions with having the management option in the future. I need to learn more about management. Until...

Had to replace switches with GS724TPv3 | NETGEAR Communities

Good dayI am very new to the Netgear range as I have been working mostly with Cisco and Juniper. Anyway, I had a major storm which took out all the switches...

GS728TPv2 is it End of Life? | NETGEAR Communities

We have a number of GS728TPv2 switches - can anyone confirm that these are now End of Life and should be removed? We have fairly strict cyber insurance which...

GS724TPv3 setting up routing between different VLANs' | NETGEAR Communities

I'm a new user of the switch.I'm trening to setup VLANs'.I cannot find a way to setup on this switch a routing between different VLANs' and also define the...

Netgear GS724T uplink not working to Netgear GS724TPv3 | NETGEAR Communities

hello,&nbsp;Why is the Netgear GS724T unable to establish an uplink connection with the Netgear GS724TPv3 and not receiving an IP address from DHCP? When...

GS728TXPv3 Stacking with S3300-28X-PoE+ (GS728TXP) | NETGEAR Communities

Hello, i recently got a replacement for one S3300-28X-PoE+ (GS728TXP) and it is called&nbsp;GS728TXPv3.The GUI is completely different and i cannot find the...

GS728TPv2 doesn't seem to support LLDP-Mib | NETGEAR Communities

I have a&nbsp;GS728TPv2 that I found does not appear to support LLDP-MIB.&nbsp; It gives OID not found and also doesn't list it on the MIB page.&nbsp;&nbsp;I...

GS724TPv3 | NETGEAR Communities

Hi all,&nbsp;i have a FritzBox (=in Germany a very popular Home / Consumer Router) and behind the FritzBox a&nbsp;GS724TPv3 Switch. I use a Mac mini and I do...

GS724TPv3 | NETGEAR Communities

I found my switch on LAN with Discover Tool and got its IP but admin page (purple button) is not reachable through browser.

GS728TPv2 Port Security - Sticky MAC | NETGEAR Communities

Hi All,&nbsp;I am trying to enable port security on my switch so that the first device plugged into that port is allowed, but if that device is unplugged and...

GS108PEv3 VLAN compatibility with GS728TPv2 backbone | NETGEAR Communities

I'm in the planning stage of adding VLANs to a network that currently does not have VLANs implemented.&nbsp; The backbone is two fiber-connected Netgear...

GS728TPv2 - What is the Latest BOOT Version (NOT Software Version)? | NETGEAR Communities

Greetings,&nbsp;&nbsp; &nbsp;I've been updating the firmware on my GS728TPv2 from time to time for several years. Currently I have 6.0.10.17 loaded. That...

GS728TPv2 POE Loading page | NETGEAR Communities

I have just bought a second hand GS728TPv2Upgraded the firmware to 6.0.10.14 and did a factory reset.&nbsp;My issue is the on the System/POE page it just...

GS728TPv2 strange behavior all aps' going down. | NETGEAR Communities

Hello, hopefully you can help me. The last few days ive installed a&nbsp;GS728TPv2 which power four Ubiquiti u6-pro access points. The cable to each one is...

Netgear GS728TPv2 | NETGEAR Communities

I have my Netgear GS728TPPv2 powering up 20 units of Akuvox C315W indoor monitors. However, all the indoor monitors fails to boot. However, I have tried...

Connecting GS752TPP and GS728TPv2 | NETGEAR Communities

I have the switches connected through ports 48 and&nbsp; 23 respectively.&nbsp; The new switch&nbsp; (GS728TPv2) initially had a DHCP address.&nbsp; I...

GS728TPS(B) | 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports | NETGEAR Support

GS728TPS(B) - 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports

FS728TPv2 | 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports | NETGEAR Support

FS728TPv2 - 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports

FS728TPv1 | 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports | NETGEAR Support

FS728TPv1 - 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Cuisine Schmidt IT Solutions - Simplify Business Processes

Schmidt cuisine enables their advisors to present new kitchen designs using tablets to provide its customers an excellent buying experience.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff