Search results for: GS728TPPv3

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.41 - NETGEAR Support

Release Date: July 7, 2026 Bug Fixes: Fixes the issue where the switch becomes unreachable after renewing its DHCP-assigned IP address if the DHCP server is temporarily unavailable during lease renewal. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports might not display. Workaround: perform a cable test for a single port on the switch through Insight. After you change the IP address of the switch, it might take around 6 minutes to...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.1.11 - NETGEAR Support

Release Date: July 7, 2025 New Features and Enhancements: Support for the UI Dark Theme Support for DHCP servers and DHCP relays. Support for HTTP, instead of TFTP, to improve reliability Support for 16 allowed LLDP neighbors per port Increased the maximum supported password length to 64 characters Reduced the query response time when polling SNMP MIB Removed the Diffie-Hellman key exchange algorithms that might pose security concerns. Bug Fixes: Fixes the issue where the GS752TPv3 and GS752TPPv...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.19 - NETGEAR Support

Enhancement: When you change to the NETGEAR Insight mode for the first time, the device IP address and VLAN settings are now kept instead of being reset to default values. Bug fixes: The switch cannot be accessed if DHCP server assigns an IP in the range of 192.168.0.x. The switch cannot be accessed after assigning a static IP through Insight. Known issues: Some port results are not displayed when doing all ports Cable Test via Insight. It will take around 10~15 minutes to update IP address at D...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.25 - NETGEAR Support

New features: Support for the Protected Port feature through Insight cloud management. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.netgear.com/files/GDC/GS728TPPv3/GS728TPv3_GS728TP...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.24 - NETGEAR Support

Bug Fixes: Fixes the issue where the switch stops forwarding all multicast control packets after any of the ARP table entries ages out. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.n...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.13 - NETGEAR Support

Bug Fixes: Fixes the issue where connecting a computer to an IP phone’s LAN port causes the switch to remove the voice VLAN, resulting in a 30 second loss of call audio. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports may not display. After you change the IP address of the switch, it may take 10 to 15 minutes to update the IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.0.36 - NETGEAR Support

Enhancements: You can now use the new NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight app to discover the switch in the same subnet. The NDT supports UPnP, which is now the preferred method of discovery. Bug Fixes: Fixes the issue where the switch sends incorrect VLAN port members to the SNMP manager. Known issues: When performing a cable test for all ports on the switch through Insight, results for some ports may not display. After changing the IP address of the switch, it may take 1...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.16 - NETGEAR Support

New Features: PoE self-healing reboots a connected powered device if the PD becomes unresponsive. Bug fixes: The PVID setting cannot be cleared by clicking the Clear button. The registration link on the GUI is incorrectly using the URL for Insight portal website. An untranslated "Apply" button on some German and Japanese UI pages doesn’t work. Enabling Auto-DoS does not automatically select all DoS options. SNMPv3 doesn't work after you log in with a newly configured password. Known Issues: The ...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.12 - NETGEAR Support

Bug Fixes: Fixes the issue where the management VLAN ID may be overwritten with the default value on a trunk port when you manage the switch through Insight. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports may not display. After you change the IP address of the switch, it may take 10 to 15 minutes to update the IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Wa...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.31 - NETGEAR Support

Features and Enhancements: Addition of bidirectional synchronization of the configuration settings between Insight and the device UI Addition of online checks for new firmware updates Insight management mode is now enabled by default Update to the Dashboard page in the device UI Known issue: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP addres...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.0.15 - NETGEAR Support

New Features: New responsive user interface (UI) that can adjust to the size of your screen Auto-Camera VLAN Auto-WiFi VLAN Known Issues: The admin page is not reachable if the switch is in a 192.168.0.0 subnet and obtains an IP other than 192.168.0.239. Workaround: Set a DHCP reservation for the switch so that it obtains the IP address 192.168.0.239. If there are multiple switches, then isolate each switch from the network, access each switch at the default IP address 192.168.0.239 and configur...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.22 - NETGEAR Support

New Features: Supports the management of DHCP snooping and L2 relay through Insight. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The D...

NMS300 Software Version 1.7.0.20 - NETGEAR Support

New Features: This version supports the following new switches: GS724TPv3 and GS724TPPv3 GS728TPv3, GS728TPPv3, GS752TPv3, and GS752TPPv3 Bug Fixes: Fixes the issue where you cannot download a configuration file from the switch via the NMS300. Fixes the issue where you cannot update firmware from the NMS300. Security Fixes: This software addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known Issue: Any type of ...

I cannot access the admin page of my NETGEAR Smart Switch; what do I do? - NETGEAR Support

This article applies only if your network uses a 192.168.0.0 subnet and only to the following NETGEAR smart switches and firmware versions: GS724TPv3: Firmware 6.2.0.16 and below. GS724TPPv3: Firmware 6.2.0.16 and below. GS728TPv3: Firmware 6.2.0.16 and below. GS728TPPv3: Firmware 6.2.0.16 and below. GS752TPv3: Firmware 6.2.0.16 and below. GS752TPPv3: Firmware 6.2.0.16 and below. MS324TXUP: Firmware 1.0.0.25 and below. If you are unable to access the admin page of your smart switch and your netw...

Bi-Directional Sync on Insight-managed Smart Switches with Insight - NETGEAR Support

Insight bidirectional synchronization instantly updates the Insight cloud whenever you change settings through the device UI. If a local change affects only the switch, Insight synchronizes the change immediately. If the change affects the entire Insight network configuration, Insight does not synchronize the change. Instead, Insight sends a notification indicating that the network-level configuration changed on a specific device. The next time the switch restarts, Insight overrides the local ch...

NETGEAR Insight Cloud Portal and App version 7.4 - NETGEAR Support

< Insight 7.5 Insight 7.3 > NETGEAR Insight Cloud Portal version 7.4 version 7.4.2 Version 7.4.4 Version 7.4.2 Release Date: June 15, 2024 New Features: Adds support on the PR60X and PR460X Pro Routers for OpenVPN at the device level, VLAN DHCP options 15 and 42, and VPN client access control, including support for multiple subnets. Adds support for RF profiles as well as default and newly defined customer profiles for ProAV and IT deployments. Add support for instant synchronization of local UI...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

2 LANS on one switch? | NETGEAR Communities

I have a new GS728TPPV3. My question is can I dedicate some ports to 10.0.x.x and some to 192.168.x.x on the same switch?

Does GS728TPPv2 have a limit on number of mac addresses in a mac address-based VLAN? | NETGEAR Communities

I'm looking for a switch with POE and mac address-based VLAN capabilities and came across the GS728TPPv2.&nbsp;I want to put my smart home devices in a...

Issue with PoE Interface on GS728TPPv2 | NETGEAR Communities

Hello everyone,&nbsp;I'm experiencing a persistent issue with the PoE interface on my NETGEAR GS728TPPv2 switch.The interface seems to be constantly loading...

GS724TPPv3 (FW v6.1.0.10) PoE MIBs error | NETGEAR Communities

Hi,I'm trying to check/enable/disable PoE on switch ports via SNMP. The problem is that I'm using MIBs for firmware version 6.2.1.12 but my switch has...

ProSAFE 24-Port Gigabit PoE+ Smart Switch with 4 SFP Ports (GS728TPPv2) | NETGEAR Communities

i got this for my security cam system and I'm trying to know what port will give it internet so i can set it up it in the&nbsp; link/act mode and can find it...

GS724TPPV3 possibly blocking VRRP on my mobility express primary election port 112 | NETGEAR Communities

we have just started replacing our older switches and immediatly have started a new problem.&nbsp;&nbsp; We have Cisco AP's using the Mobility express and as...

GS728TXPv3 Stacking with S3300-28X-PoE+ (GS728TXP) | NETGEAR Communities

Hello, i recently got a replacement for one S3300-28X-PoE+ (GS728TXP) and it is called&nbsp;GS728TXPv3.The GUI is completely different and i cannot find the...

GS316EPP VLAN trunk to GS728TPPv2 | NETGEAR Communities

Trying to setup vlans to isolate SKYQ boxes from the main network (getting all sorts of issues, and it seems common).&nbsp; I have a Vigor router connected...

GS728TPPv2 how to trunking SonicWALL VLAN | NETGEAR Communities

HI Support&nbsp;we have the remote station use SonicWALL TZ500 + GS728TPPv2 could switch setup on customer site.&nbsp;We all set up on SonicWALL TZ500, the...

GS728TPPV2 POE Loading | NETGEAR Communities

Can find others with this same problem but no solution, does one exist now?&nbsp;Updated firmware to 6.0.10.14 but still the same in all...

SNMP GS728TPPV2 | NETGEAR Communities

Hello all,I would like to add GS728TPPV2 Switches into SNMP Monitoring. Unfortunately I did only find at System &gt; SNMP &gt; Supported...

GS728TPPv2 working with Nest Mesh Router issues | NETGEAR Communities

We have internet service with Google Fiber. We are using a NEST MESH router with 3 additional mesh points.&nbsp;When we try to connect the internet to one of...

GS728TPPv2 M4100-24PoE+ Port PVID question with two vlans | NETGEAR Communities

I have set up two vlans with different subnets with dhcp and dns enabled on my UTM.&nbsp; These are both set on one port on the UTM.When I connect this port...

Configure vlan security Netgear GS728TPPv2 M4100-24PoE+ | NETGEAR Communities

I have run out of ports on my UTM which defines each subnet.&nbsp; Is it possible to have two different subnets share a vLan.My problem is that each subnet...

Vlan Routing to Internet GS728TPPv2 | NETGEAR Communities

Hi all!&nbsp;I really need you help with my issue,&nbsp;I have one&nbsp;GS728TPPv2 with SW 6.0.6.3 version&nbsp;And my issue is something like in this...

GS728TPPv2 PoE Configuration Loading page | NETGEAR Communities

The PoE Configuraiton page and Advanced page just keeps loading. PoE itself appears to be working. Just can't load the configuration page. Other pages are...

Switch GS728TPPv2 not working when connected to wireless bridge | NETGEAR Communities

Hi all,I tried others forums but to no avail ....we need to switch our security cams to poe system. Since the building is not ours we cannot use utp...

GS728TPPv2 stackable switches | NETGEAR Communities

I just purchased three GS728tppv2 switches and would like to stack them together using SPF ports. I am new into SPF and would like to know what kind of...

GS728TPPv2 Fan speed (idle) | NETGEAR Communities

Hello NETGEAR Community,i just set up a GS728TPPv2 in my Office. I need some POE ports and have a long history using NETGEAR Products so i buy a...

MIB files for GS728TPPV2 | NETGEAR Communities

Good Morning. I am looking for the MIB files for the following switches. GS728TPPV2 , M5300 - 28GF3, GS418TPP To be used with BMS.&nbsp; Thank you very...

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff