Search results for: GS728TP

GS728TP/GS752TP/GS728TPP Firmware Version 6.0.1.16 - NETGEAR Support

Note It will take about 8 minutes for the first boot up after upgrade to 6.0.1.16 from previous releases 6.0.x.x, because the switch will auto-upgrade the new PoE firmware. Please wait patiently till the switch completely boot up. GS752TP, GS728TP and GS728TPP support Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. Fixed issues Unable to get any value from MIB object table - Dot1dTpFdbTable There is delay (3~6 seconds) when powering...

GS728TP/GS728TPP/GS752TP Firmware Version 6.0.1.29 - NETGEAR Support

New Features and Enhancements: To comply with California state law, the switch now requires that you change the default password after using it to access the local browser UI. Security Fixes: PSV-2019-0059 For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: System Up Time now continues to count past 248 days. Switch now correctly enforces password length limit of 20 characters. Limitations Reboot is required when changing between Switch m...

GS728TP/GS752TP/GS728TPP Firmware Version 6.0.1.18 - NETGEAR Support

Note It will take about 8 minutes for the first boot up after upgrade to 6.0.1.18 from previous releases 6.0.x.x, because the switch will auto-upgrade the new PoE firmware. Please wait patiently till the switch completely boot up. GS752TP, GS728TP and GS728TPP support Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. New Features and Enhancements Improved switch security to guard against cross-site-scripting attacks. Fixed issues Only...

GS728TP/GS728TPP/GS752TP Firmware Version 6.0.1.24 - NETGEAR Support

Modifications: This firmware supports new version of IC (PHY). Implement POE recover mechanism to enhance PoE IOT functionality. Remove default SNMP community "private" and “public” to minimize security vulnerability. Fixed issues: Switch crashes when receiving IPv6 router advertisement packet whose ‘retrans timer’ field is set to 64ms. SNMP Engine ID is not unique with different GS728TP/TPP/GS752TP units. Known issues None. Limitations Reboot is required when switching between ‘Switch’ mode and...

GS728TP/GS728TPP/GS752TP Firmware Version 6.0.1.30 - NETGEAR Support

Bug Fixes: Fixes the issue where hidden pages in the local browser UI can be accessed without authentication. Limitations Reboot is required when changing between Switch mode and Router mode. Dynamic VLAN assignment and DiffServ Simple Policy (differentiated services flow-based policer) are supported in Switch mode, but not in Router mode. Download Link: https://www.downloads.netgear.com/files/GDC/GS728TP/GS728TP_GS728TPP_GS752TP_V6.0.1.30.zip Firmware Update Instructions: To update your product...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.3.3 - NETGEAR Support

MPORTANT CHANGES NOTE: This new firmware release requires product registration to unlock full access to the local browser UI. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. New Features and Enhancements: Faster application of multiple port configuration settings through the Insight Cloud Portal and the Insight app. Bug Fixes: Port now sends properly formed IGMP queries after booting up with non-default VLAN (VLAN 1). Switch connectivity is no ...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.6.2 - NETGEAR Support

New Features and Enhancements: Registration is no longer required to access the full UI menu. It can be skipped at UI login. Insight management mode is disabled by default. Select the “NETGEAR Insight Mobile App and Insight Cloud Portal” radio button to enable Insight management mode. You can pause Insight management mode at any time to temporarily manage the switch through the device UI by selecting the “Local-Only GUI” radio button. To return to Insight management mode, select the “NETGEAR Ins...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.41 - NETGEAR Support

Release Date: July 7, 2026 Bug Fixes: Fixes the issue where the switch becomes unreachable after renewing its DHCP-assigned IP address if the DHCP server is temporarily unavailable during lease renewal. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports might not display. Workaround: perform a cable test for a single port on the switch through Insight. After you change the IP address of the switch, it might take around 6 minutes to...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.48 - NETGEAR Support

Security Fixes: PSV-2019-0059 PSV-2019-0066 Bug Fixes: [LLDP-MED] LLDP Network Policy Not being send to Polycom VVX401 phones correctly [IGMP snooping] Multicast stream is interrupted for around 1-2 seconds when a device leaves a Multicast group [ACL] Implicit deny is not working when configuring MAC address Access Control List [SNMP] Uptime reported via SNMP gets reset after around 49 days [SNMP] SNMP service hangs up after 1-2 days Known Issues: [File management] Copy image fail [Workaround]: ...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.1.11 - NETGEAR Support

Release Date: July 7, 2025 New Features and Enhancements: Support for the UI Dark Theme Support for DHCP servers and DHCP relays. Support for HTTP, instead of TFTP, to improve reliability Support for 16 allowed LLDP neighbors per port Increased the maximum supported password length to 64 characters Reduced the query response time when polling SNMP MIB Removed the Diffie-Hellman key exchange algorithms that might pose security concerns. Bug Fixes: Fixes the issue where the GS752TPv3 and GS752TPPv...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.19 - NETGEAR Support

Enhancement: When you change to the NETGEAR Insight mode for the first time, the device IP address and VLAN settings are now kept instead of being reset to default values. Bug fixes: The switch cannot be accessed if DHCP server assigns an IP in the range of 192.168.0.x. The switch cannot be accessed after assigning a static IP through Insight. Known issues: Some port results are not displayed when doing all ports Cable Test via Insight. It will take around 10~15 minutes to update IP address at D...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.31 - NETGEAR Support

GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades. New features and enhancements: Initial Release Notes: The USB storage device that you attach to the USB port must comply with the following requirements: - The USB device must support USB 2.0. - The USB device must support the FAT32 or VFAT file system. The NTFS file system is not supported.. Known issue: The device does no...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.9.3 - NETGEAR Support

Bug Fixes: Fixes the issue on the System > Device View page where the power LED of the device is not shown lit. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 6.0.9.1: We recommend against downgrading the firmware image to 6.0.8.x or earlier version after updating to 6.0.9.1 or later versions. Since HTTPS i...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.25 - NETGEAR Support

New features: Support for the Protected Port feature through Insight cloud management. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.netgear.com/files/GDC/GS728TPPv3/GS728TPv3_GS728TP...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.10 - NETGEAR Support

New Features: Add Secure Diagnostic Mode (SDM) to allow NETGEAR Support to establish a secured connection for remote troubleshooting. This is disabled by default. Bug Fixes: Fixes the issue when an OUI is added, the last two hexadecimal are changed to E0 instead of the entered value. Changes: After HTTPS is enabled, accessing the device UI via HTTP is not redirected to HTTPS. Warnings: Read and follow these warnings before updating a firmware version: We recommend against downgrading the firmwar...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.37 - NETGEAR Support

GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades. New features and enhancements: Improved German and Japanese translation for Web GUI and context help.. Changed MVR VLAN setting behavior to be consistent as other NETGEAR smart switches. Fixed Issues: Device may run out of memory if there is a frequent renewal of DHCP IPv6 address. Can't set the PVID of a port when the lang...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.24 - NETGEAR Support

Bug Fixes: Fixes the issue where the switch stops forwarding all multicast control packets after any of the ARP table entries ages out. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.n...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.13 - NETGEAR Support

Bug Fixes: Fixes the issue where connecting a computer to an IP phone’s LAN port causes the switch to remove the voice VLAN, resulting in a 30 second loss of call audio. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports may not display. After you change the IP address of the switch, it may take 10 to 15 minutes to update the IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.26 - NETGEAR Support

New Features and Enhancements: The maximum number of LLDP (Link Layer Discovery Protocol) neighbors supported by the switch has been increased. This enhancement improves compatibility in environments with high device density and ensures more comprehensive network topology discovery. Bug Fix: Fixes the issue where the switch could go offline in Insight when using a Layer 3 VLAN. The update ensures the switch stays connected in this setup. Warnings: Read and follow these warnings before you update...

Setup Help pls - GS728TP with Billion Router 7800VDOX | NETGEAR Communities

I need some help setting up my Netgear GS728TP managed switch with a Billion Modem/Router BiPac 7800VDOX I have tried to set up straight out of the box...

GS728TP: PoE Fault | NETGEAR Communities

Hello,We just purchased a GS728TP PoE Smart Switch.Unfortunately, when we plug in a new device that requires PoE, the switch has to be rebooted before it...

Nec SV8100 Phone System and GS728TP | NETGEAR Communities

I need to set it on both the Netgear Switch GS748Tv3 going over a EnGenius ENH500 Wireless Bridge in the WDS Bridge mode to another building with a Netgear...

Nec SV8100 Phone System and GS728TP v3 QOS | NETGEAR Communities

I am needing help setting up my GS728TP and GS748Tv3 Switch Settings so that they will pass the Nec SV8100 Phone System packets. My issue is that I have a...

Does GS728TPPv2 have a limit on number of mac addresses in a mac address-based VLAN? | NETGEAR Communities

I'm looking for a switch with POE and mac address-based VLAN capabilities and came across the GS728TPPv2. I want to put my smart home devices in a...

Issue with PoE Interface on GS728TPPv2 | NETGEAR Communities

Hello everyone, I'm experiencing a persistent issue with the PoE interface on my NETGEAR GS728TPPv2 switch.The interface seems to be constantly loading...

GS728TP Boot 2.0.0.11 | NETGEAR Communities

Hi,I possess a GS728TP since 2014, running perfectly.I updated the firmware to version 6.0.1.30, all fine.The boot version is 2.0.0.6 and I read the latest...

InterVLAN on GS728TP not working | NETGEAR Communities

Hello, I have a configuration with three different VLAN where I want to enable the routing between them.The configuration is the following: VLAN...

ProSAFE 24-Port Gigabit PoE+ Smart Switch with 4 SFP Ports (GS728TPPv2) | NETGEAR Communities

i got this for my security cam system and I'm trying to know what port will give it internet so i can set it up it in the  link/act mode and can find it...

GS728TPv2 is it End of Life? | NETGEAR Communities

We have a number of GS728TPv2 switches - can anyone confirm that these are now End of Life and should be removed? We have fairly strict cyber insurance which...

Cannot Download Config for GS728TP | NETGEAR Communities

Hello, I'm trying to download the configuration of my Netgear GS728TP, but every time I try, I get "Failed - Network error"  message. Searching the...

NetGear GS728TP config for Wireless Access Points with 2 SSID's | NETGEAR Communities

Walking into a new environment and just double checking all the configs. Switch purpose: 5 POE wireless access points  that serve 2 different...

gs728tpp not working with wireless access point | NETGEAR Communities

I'm trying to get a wax214v2 WAP working with a gs728tpp switch, but it's not working. Devices on connected to the WAP have no access to the internet. Wired...

Slow Internet Speed Through Netgear Switch (GS728TP)(V2) | NETGEAR Communities

Hello everyone,   The problem I am have is slow internet speed through a new Netgear Switch (GS728TP)(V2). The setup I have is xfinity...

GS728TPv2 doesn't seem to support LLDP-Mib | NETGEAR Communities

I have a GS728TPv2 that I found does not appear to support LLDP-MIB.  It gives OID not found and also doesn't list it on the MIB page.  I...

How to improve Netgear switch GS728TP from loop | NETGEAR Communities

Hello team, I need a suggestion how to improve configuration on Netgear Prosafe GS728TP-200 EUS switch in order to protect from loop. I am working...

GS316EPP VLAN trunk to GS728TPPv2 | NETGEAR Communities

Trying to setup vlans to isolate SKYQ boxes from the main network (getting all sorts of issues, and it seems common).  I have a Vigor router connected...

GS728TPv2 Port Security - Sticky MAC | NETGEAR Communities

Hi All, I am trying to enable port security on my switch so that the first device plugged into that port is allowed, but if that device is unplugged and...

GS728TPP Switch | NETGEAR Communities

I have a Netgear GS728TPP switch getting data via fiber from another GS728TPP. The switch keeps freezing. There is no overpower warning. When I reset the...

Block traffic from a list of locally connected MAC addresses on a GS728TP ProSafe Smart Switch | NETGEAR Communities

At times, I want to be able to block traffic from my kid's devices on my network. Some devices are connected by WiFi and others by ethernet. I figure that I...

GS728TPS(B) | 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports | NETGEAR Support

GS728TPS(B) - 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports

GS728TS(B) | 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper/SFP+ and 4 Dedicated SFP+ Ports | NETGEAR Support

GS728TS(B) - 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper/SFP+ and 4 Dedicated SFP+ Ports

S3300-28X (GS728TX) | 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-28X (GS728TX) - 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports

S3300-28X-PoE+ (GS728TXP) | 28-Port Gigabit Ethernet Stackable Smart Switch with 24 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-28X-PoE+ (GS728TXP) - 28-Port Gigabit Ethernet Stackable Smart Switch with 24 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports

FS728TPv2 | 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports | NETGEAR Support

FS728TPv2 - 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports

FS728TPv1 | 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports | NETGEAR Support

FS728TPv1 - 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Cuisine Schmidt IT Solutions - Simplify Business Processes

Schmidt cuisine enables their advisors to present new kitchen designs using tablets to provide its customers an excellent buying experience.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff

DC Montessori School Chandigarh - Case Study - NETGEAR Blog

DCM School Chandigarh has upgraded its network with NETGEAR Business, improving speed, reliability, and security for staff and students.

TKTEI's Network Success with NETGEAR's solutions

TKTEI improved network efficiency with NETGEAR solutions, reducing costs and downtime. Highly recommended for reliability and ease of use.