Search results for: GS105E

GS105E Firmware Version 1.01.25 - NETGEAR Support

New Features and Changes: Add a new option “any” to IGMP Snooping Static Router Port selection (System > MultiCast > IGMP Snooping). When selected, IGMP control packets are flooded to all ports. Increase the DHCP timeout time from 15 seconds to 60 seconds Modifications / Fixes: Fix the issue when IGMP Snooping and Block Unknown Multicast Address (System > MultiCast > IGMP Snooping) are disabled, the following multicast MAC addresses are not being forwarded: 01:00:5E:00:00:01, 01:00:5E:00:00:02 a...

GS105E Firmware Version 1.02.04 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.25 or newer before upgrading the GS105E firmware. Older versions of the Plus Utility do not support the password encryption required by V1.02.02 and newer firmware.. New Features and Changes: None Modifications / Fixes: Fix the problem of not able to login to GS105E after upgrading its firmware from V1.01.25 to V1.02.02. Known issues: None. Limitations: None. Installation Instructions Using the Downloa...

GS105E Firmware Version 1.02.02 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.24 or newer before upgrading the GS105E firmware. Older versions of the Plus Utility do not support the password encryption required by V1.02.02 firmware. New Features and Changes: Allow the forwarding of ICMP PING packet with size greater than 512 bytes. Add password encryption Modifications / Fixes: Change the default setting of Block Unknown Multicast from enable to disable. Known issues: None. Limi...

GS105Ev2 Firmware Version 1.6.0.15 - NETGEAR Support

Enhancements: You can now use the new NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight app to discover the switch in the same subnet. The NDT supports UPnP, which is now the preferred method of discovery. Warnings: Read and follow these warnings before updating your firmware: As of firmware version 1.6.0.15, the NETGEAR Switch Discovery Protocol (NSDP) that was used by the old NETGEAR Switch Discovery Tool (NSDT) is no longer supported. Instead, now use the NDT or the latest NETGEAR In...

GS105Ev2 Firmware Version 1.3.0.3 - NETGEAR Support

Bug Fixes: Fixed the problem that DHCP mode shows disabled on Web GUI even though it is actually enabled. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is GS105Ev2_V1.3.0.3.bin Download Link: http://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.3.0.3.zip Last Updated:10/17/2025 | Article ID: 25658 Was this article helpful? Yes No

GS105Ev2 Firmware Version 1.3.0.1 - NETGEAR Support

New Features & Enhancements: Supports Web GUI management. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is GS105Ev2_V1.3.0.1.bin Download Link: http://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.3.0.1.zip Last Updated:10/17/2025 | Article ID: 25397 Was this article helpful? Yes No

GS105Ev2 Firmware Version 1.6.0.10 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Download Link: https://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.6.0.10.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. When the GS105PE is upgraded to firmware versi...

GS105EP / GS105EPP Firmware Version 2.0.0.3 - NETGEAR Support

Enhancements: Initial release with production enhancements Warnings: Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the device as it is no longer supported from firmware version 1.0.1.4. Use NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight App to discover the switch in the same subnet. The firmware file for models GS105EP/GS105EPP is different from the file for model GS305EP. Ensure you download and install the correct firmware for your model. Known Issues: After you u...

GS105Ev2 Firmware Version 1.6.0.4 - NETGEAR Support

Modifications: Web GUI title changes to NETGEAR GS105Ev2 Security Fixes: PSV-2018-0538 PSV-2018-0542 PSV-2018-0612 For more information about security vulnerabilities, visit https://www.netgear.com/about/security Bug Fixes: Access control list allows invalid combinations of IP and mask settings. WARNING: After GS105Ev2 is upgraded to FW version V1.6.0.3 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support...

GS105EP / GS105EPP Firmware Version 2.0.0.1 - NETGEAR Support

Enhancements: Initial release Warnings: Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the device as it is no longer supported from firmware version 1.0.1.4. Use NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight App to discover the switch in the same subnet. The firmware file for models GS105EP/GS105EPP is different from the file for model GS305EP. Ensure you download and install the correct firmware for your model. Known Issues: After you upgrade the firmware to versio...

GS105Ev2 Firmware Version 1.6.0.25 - NETGEAR Support

Release Date: July 02, 2026 Bug Fixes: Fixes the issue where restoring an older firmware configuration causes the management VLAN ID to be set to an invalid value, making the switch management GUI inaccessible. Warnings: Read and follow these warnings before updating your firmware: As of firmware version 1.6.0.15, the NETGEAR Switch Discovery Protocol (NSDP) that was used by the old NETGEAR Switch Discovery Tool (NSDT) is no longer supported. Instead, now use the NDT or the latest NETGEAR Insigh...

GS105Ev2 Firmware Version 1.5.0.4 - NETGEAR Support

New Features & Enhancements: Implemented new and more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). WARNING: After GS105Ev2 is upgraded to FW version V1.5.0.4 or higher, it cannot work with Plus Utility version prior to V2.4.3. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Once GS105Ev2 FW has been upgraded to V1.5.0.4, you need to login to web GUI to upgrade boot loader. GS105Ev2 has 2 different chip versions ...

GS105Ev2 FAQs - NETGEAR Support

What is GS105Ev2? This is a 5-port Gigabit switch. It is NETGEAR’s 2nd generation of ProSAFE Plus Switch. Comparing to GS105Ev1, is there any new feature in GS105Ev2? Yes, the new features added are loop detection and automatic DoS attack prevention. Is GS105Ev2 firmware compatible with GS105Ev1? No. The firmware is not compatible between v1 and v2, and the configuration files are not compatible as well. What is a ProSAFE Plus Switch? It’s an upgrade to unmanaged switch which can only provide in...

GS105Ev2 Firmware Version 1.4.0.9 - NETGEAR Support

New Features & Enhancements: Added the option to enable/disable Plus Utility Management under Web GUI. Bug Fixes: Fixed the security vulnerability issue related to XSS (Cross-Site Scripting) and CSRF (Cross-Site request forgery) attacks.. Fixed the security vulnerability issue where the web login session ID is predictable. Limitations: Switch configuration will be kept after upgrading the firmware to v1.4.0.2, but the configuration file previously saved on the PC cannot be restored after the FW ...

GS105Ev2 Firmware Version 1.6.0.11 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Download Link: https://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.6.0.11.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. When the GS105PE is upgraded to firmware version V1.5.0.4 or higher, it cannot work with any Plus Utility version prior to V2.4.3. Please download the lat...

GS105EP / GS105EPP Firmware Version 2.0.0.4 - NETGEAR Support

Warnings: Read and follow these warnings before updating your firmware: Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the device as it is no longer supported from firmware version 1.0.1.4. Use NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight App to discover the switch in the same subnet. The firmware for models GS105EP, GS105EPP, and GS305EPP is different from the firmware for model GS305EP. Download and install the correct firmware for your model. Known Issues: Fixes...

GS105Ev2 Firmware Version 1.5.0.5 - NETGEAR Support

Fixes and Modifications: Fixed the issue that there is a chance where link cannot be established with random port after power cycle. WARNING: After GS105Ev2 is upgraded to FW version V1.5.0.4 or higher, it cannot work with Plus Utility version prior to V2.4.3. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgrade Procedure: Download the new firmware 1.5.0.4 from NETGEAR product support Website and store it in local PC, and remember its location in the PC...

GS105Ev2 Firmware Version 1.4.0.6 - NETGEAR Support

New Features & Enhancements: Added the option to disable/enable power saving mode. Bug Fixes: Changed the Flow Control (System > Status > Switch Status) default setting from enabled to disabled. Fixed the problem where the port 1 will link at 100M instead of 1000M after upgrading the firmware to version v1.4.0.2. Fixed the problem where the pixel errors are observed when watching video from internet through GS105Ev2. Limitations: Switch configuration will be kept after upgrading the firmware to ...

GS105EP / GS105EPP Firmware Version 2.0.0.10 - NETGEAR Support

Release Date: June 29, 2026 New Features and Enhancements: Support for adjusting the management VLAN to enhance network management flexibility. Note: After you update to this firmware, the switch management page is only accessible from ports in VLAN 1, which is the default management VLAN. If you are accessing the switch from a port assigned to a different VLAN, you need to switch to a VLAN 1 port to regain access. Support for manual SNTP server configuration for system time synchronization. Sup...

GS105Ev2 Firmware Version 1.6.0.6 - NETGEAR Support

New Features: The default admin password must be changed to a unique password after the first login. Modifications: Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only. Download Link: http://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.6.0.6.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. After GS105Ev2 is upgraded to FW vers...

Can't get GS110TP to work as simple as GS105E | NETGEAR Communities

For my work I have to check services going over utp links in different vlans. I used a GS105E with its mirror function. I can connect the GS105E without any...

GS105E, GS108E, and WG102, all in a VLAN - how? | NETGEAR Communities

I have a GS108E connecting 4 point of sale systems, linking to a GS105E connecting to a point of sale server and WG102 access point with 2 VLAN's on 2...

GS105ev2 firmware breaks prosafe plus | NETGEAR Communities

The 2 latest firmwares for this model removed the switch management mode options and the Prosafe Plus Utility can't find the switch. Tried both...

GS105E V2 Firmware "issue" | NETGEAR Communities

I've updated the firmware (1.6.0.21) via the Prosafe Plus utility only to find it is now not seen by said PP. I can access it via the web but I find that I...

Netgear GS105e mismatch | NETGEAR Communities

Starting the cable tester it gives a mismatch (Cable Fault Distance 6 meters) at port 1.  The other cables are OK.  After replacing the...

GS105E Statement of Volatility | NETGEAR Communities

Hello, Could I be provided with a statement of volatility for the GS105E? Thank you!

5-Port Gigabit Ethernet Plus Switch (GS105Ev2) DST Error Message on Mac | NETGEAR Communities

5-Port Gigabit Ethernet Plus Switch (GS105Ev2)Switch up and running, however when I attempt to launch on (Mac mini M2 Pro) the DST comes back with message...

GS105E acting like an unmanaged switch | NETGEAR Communities

Hi all,i just pulled out an old GS105E of my storage.Unfortunatley it acts more like an unmanaged switch.If I put in on my network and connect a computer it...

Gs105Ev2 | NETGEAR Communities

After 3 months of owning company bricked my switch and during the 3 month support it wouldn’t work without contacting support to let them allow access to the...

Letter of Volatility GS105E GS108E | NETGEAR Communities

Hello,May I please get Letters of Volatility (LOVs) for the GS105E and GS108E?  I found prior discussions but the links were only valid for 48...

GS105Ev2 - Unable to access switch using a browser | NETGEAR Communities

For nearly 10 years I'm a happy user of my GS105Ev2. Now I want to log into the UI again, but (of course) did not remember any credentials. I've reset the...

GS105Ev2 Update Firmware Beyond V 1.2.0.5 | NETGEAR Communities

I have an unused GS105Ev2 Plus Switch that I have been playing with. On an apparently misguided whim, I downloaded and flashed the original V1.2.0.5...

Stripping/Tagging ISP VLAN on GS105Ev2 | NETGEAR Communities

Hi all, I am considering purchasing a GS105Ev2 managed switch. I want to check it will meet my needs. My new Internet Service Provide...

Netgear GS105E Setup Cinfiguration | NETGEAR Communities

(Just noticed i posted this same post in the wrong discussion subsection - if a Mod. can delete that post please).  HiJust purchased a Netgear...

GS105Ev2 does not get IP address from DHCP | NETGEAR Communities

I have a brand new GS105Ev2 (GS105E-200NAS).  It already has the latest firmware as of today, which is V1.6.0.11.  I attached it to the...

GS105Ev2 switch admin page automatically logout issue | NETGEAR Communities

OS: Win 11I attempted to access the switch admin page using the provided Switch Discovery Tool for Windows. The tool successfully connected to the switch and...

GS105E unexpectedly responds to ping | NETGEAR Communities

Hi ...My old "ProSafe GS105E Unmanaged Plus" recently started to respond to ping requests ... in addition to the device I intended to ping.No surprise: DUP...

No web UI on GS105E | NETGEAR Communities

I dug an old ProSAFE Plus GS105E managed switch out of the cupboard, many years since I last used it but as far as I remember it was working fine. It's...

GS105Ev2G - need letter of volatility (LOV) / statement of volatility (SOV) | NETGEAR Communities

GS105Ev2G - need letter of volatility (LOV) / statement of volatility (SOV)    

NetGear ProSafe GS105E v2 managed switch bricked after firmware update | NETGEAR Communities

I have a Netgear ProSafe Plus switch, model . I recently attempted to do a firmware update but it appears to have failed. The switch still appears to...