Search results for: AXC761

M4200 Firmware Version 12.0.2.15 - NETGEAR Support

Applicable Models: M4200-10MG-POE+(GSM4210P) Bug Fixes: The fiber port can Up when Insert some fiber module without cable. After stack(AXC761 used) reload hosts on secondary switch fail to access management interface(via SSH or https). M4300 supports AXM765 on 12.0.2.14. Mikrotik RoMON services not passing through M4300 switches. Fiber ports link down when there are 4 fiber modules in the same port block. 'show stats group port-utilization' should display utilization percentage(%) format. Switch...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

M4300 Firmware Version 12.0.2.15 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) Bug Fixes: The fiber port can be up when some fiber module is inserted without cable. After stack(AXC761 used) reload hosts on secondary, switch fails to access management interface(via SSH or https) M4300 supports AXM765 on 12.0.2.14. Mikrotik RoMON services not passing through ...

S3300 / Smart M4300 Firmware Version 6.6.4.28 - NETGEAR Support

Bug Fixes Failed to set SNMP OID agentUserPasswordEncryptType Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: NMS300 does not support current firmware SFP+ model AXM765 cannot be used for 10G stacking. Workaround: Use other SFP+ models, such as AXM761, AXM762, AXM763, or use DAC cable AXC761/AXC763 instead. RPS/AC hot swap (quickly unplugging and plugging back in) sometimes does not take effect after reconnecting the APS1000W power cord. Workaround: Reconnect...

S3300 Firmware Version 6.6.4.9 - NETGEAR Support

New features and enhancements 10G SFP port fails to link up after device is rebooted. Fixed the problem where device may crash occasionally with the following task bcmATP-RX, unitMgrTask or spmTask, shown in the debugging log. Known issues SFP+ model AXM765 cannot be used as 10G stacking. [Workaround]: Use other SFP+ models AXM761, AXM762, AXM763 or DAC cable AXC761/AXC763 instead. RPS/AC hot swap sometimes (quickly unplug/plug) does not take effect after plug back APS1000W power cord. [Workarou...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

What NETGEAR SFP and SFP+ modules can I use in NETGEAR XS505M and XS508M Switches? - NETGEAR Support

The XS505M and XS508M support the following SFP and SFP+ modules: Module Description AGM731 SFP Transceiver 1000BASE-SX (Short range, multimode) AGM732F SFP Transceiver 1000BASE-LX (Long range, single mode) AGM734 SFP Transceiver 1000BASE-T Copper RJ45 GBIC AXC761 10GSFP+ Cu (passive) SFP+ to SFP+ Direct Attach Cable 1m AXC763 10GSFP+ Cu (passive) SFP+ to SFP+ Direct Attach Cable 3m AXM761 10GBASE-SR SFP+ GBIC (OM3/OM4 Multimode) AXM762 10GBASE-LR SFP+ GBIC (Single mode) AXM763 10GBASE-LRM SFP+ ...

What NETGEAR modules can I use in the ProSAFE 8-Port 10-Gigabit Ethernet Web Managed Switch (Model XS708Ev2)? - NETGEAR Support

The following NETGEAR modules are supported: AGM731 AGM734 The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 AMX764 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 Last Updated:07/07/2025 | Article ID: 30525 Was this article helpful? Yes No

S3300 / Smart M4300 Firmware Version 6.6.4.26 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: When the FW is upgraded to v6.6.4.26 and the switch is rebooted, sometimes the switch does not complete the boot-up process, and the power LED remains yellow. Workaround: Do a power cycle to the S3300 manually. SFP+ model AXM765 cannot be used for 10G stacking. Workaround: Use other SFP+ models, such as AXM761, AXM762, AXM763, or use DAC cable AXC761/AXC763 instead. RPS/AC hot-swap (quickly unplugging and pluggi...

What NETGEAR modules can I use in the ReadyDATA 5200 10 gigabit ports? - NETGEAR Support

The ReadyDATA 5200 has 2 x 1 gigabit Ethernet ports and 2 x 10 gigabit SFP+ ports. The 2 x 10 gigabit SFP+ ports only support 10 gigabit SFP+ modules and direct-attach cables. These ports do not support gigabit or fast Ethernet SFP modules or 10 gigabit XFP modules. The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 AXC753 (this cable is an SFP+ to XFP direct-attach cable; the SFP+ end connects in th...

What NETGEAR modules can I use in the ProSAFE 10-Gigabit Ethernet Smart Managed Switches (Models XS708T, XS712T, XS716T, XS728T, and XS748T)? - NETGEAR Support

The following NETGEAR modules are supported: AGM731F AGM732F AGM734 The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 (XS708T, XS712T, XS716T only) AXM764 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 Last Updated:07/07/2025 | Article ID: 30529 Was this article helpful? Yes No

Which optical modules do the SFP+ ports support on the XS716E? - NETGEAR Support

The XS716E comes with 1 SFP MSA socket that can be used with either Gigabit SFP or 10-Gigabit SFP+ optical modules. NETGEAR offers a complete line of SFP and SFP+ modules and DAC cables designed for this switch: AGM731F SFP Transceiver 1000BASE-SX AGM732F SFP Transceiver 1000BASE-LX AGM734 SFP Transceiver 1000BASE-T AXM761 SFP+ Transceiver 10GBASE-SR AXM762 SFP+ Transceiver 10GBASE-LR AXM763 SFP+ Transceiver 10GBASE-LRM AXM764 SFP+ Transceiver 10GBASE-LR Lite AXC753 SFP+ XFP DAC Cable AXC761 SFP...

What cables or modules can I use for my 10 Gigabit ports on my ReadyNAS? - NETGEAR Support

ReadyNAS 716X and ReadyNAS 4220X with 2x 10Gbit Copper Use Category 6 (cat-6) rated network cables (or higher) to achieve 10 Gigabit performance ReadyNAS 4220S and ReadyNAS 4200 with 2x 10Gbit SFP+ (RN12Sxxxx) These ports are SFP+ ports and do not support either SFP (Gigabit) modules or SFP direct-attach cables. The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 AXC753 (This is an SFP+ to XFP direct-...

Why does my PR60X/PR460X SFP+ not link up at 10G when I use long DAC cables? - NETGEAR Support

This article describes how to establish a 10G link on a NETGEAR PR60X / PR460X SFP+ port with longer DAC cables. This article applies to: PR60X - 10G/Multi-Gigabit Dual WAN Pro Router with Insight Cloud Management. PR460X - 10G/Multi-Gigabit Dual WAN Pro Router with Insight Cloud Management. Some longer DAC cables, such as 3-meter AXC763, have a weaker signal at the receiver. The Pro Router SFP+ port might not establish a link with these cables at a 10G speed. Alternatively, you can use 1-meter ...

S3300 Firmware Version 6.6.4.7 - NETGEAR Support

New features and enhancements Support mixed stacking between S3300 series and two 10G models from M4300 series (M4300-24X or/and M4300-12X12F). Add configurable option to disable/enable Smart Control Center (SCC) Utility under GUI page of ‘Security > Management Security > SCC Control’. Add configurable option to select different HASH algorithms for LAG under GUI page of ‘Switching > LAG > LAG Configuration’. Please find detailed description on the S3300 User Manual of firmware 6.6.6.4. Specifica...

S3300 / Smart M4300 Firmware Version 6.6.4.25 - NETGEAR Support

New Features and Enhancements: Transport Layer Security (TLS) v1.2. Improve the LOG message to indicate the reason for login failure. Bug Fixes: Looking up MIB object identifier (OID) 1.3.6.1.4.1.4526.11.1.2.15.9.1.5 does not return correct Spanning Tree (STP) status. Fixed issue where the switch sometimes reset when configuring the DNS server. Known Issues: When the FW is upgraded to v6.6.4.25 and the switch is rebooted, sometimes the switch does not complete the boot-up process, and the power ...

S3300 / Smart M4300 Firmware Version 6.6.4.21 - NETGEAR Support

New Features and Enhancements: Default password must be changed when you log in to the switch for the first time. To configure SNMPv3, the authentication protocol must be configured as MD5 or SHA. The None option for the authentication protocol is no longer allowed. Changed the default setting of the Smart Control Center (SCC) management from enabled to disabled. Note: The SCC Utility can still discover the switch. Bug Fixes: Unable to set the end time of the PoE timer to mid-night (00:00). Cann...

M4350 Firmware Version 14.0.0.15 - NETGEAR Support

Bug Fixes: Fixes the issue where you might not be able to access the switch through the OOB port and non-stop pause frames are generated by the OOB port. Fixes the issue where the status of the IPv6 management interface is not correct after you change the management VLAN. Fixes the issue where a multicast group is not learned from an interconnected switch after it is rebooted when Rapid-PVST is configured. Fixes the issue where PTP flooding does not work when you first disable IGMP and MLD snoop...

Getting started with the XS728T 10-Gigabit Smart Managed Switch - NETGEAR Support

The XS728T is a 28-port 10-Gigabit Ethernet Smart Managed Switch. It supports 24 copper 10GBased-T ports and four dedicated 1G/10G fiber ports. Frequently Asked Questions 1. What are the major enhancements for the XS728T compared with the XS712T? More 10G copper ports and fiber ports One USB port for firmware upgrade and configuration backup IPv6 Static Routing New GUI style that supports the most popular WEB Browsers (see Question 11 below for a complete list) 2. What cables can be used with th...

M4250 Firmware Version 13.0.5.10 - NETGEAR Support

Enhancements: The AV UI provides the following enhancements: Added new profiles: Allen & Heath gigaACE/GX, Audio Genelec Smart IP, AVoIP Lightware AV network, Blustream Multicast, and Unite Audio. Added the Add-Ports-Untagged-To-Profile menu on the Network Profiles page: Use this menu to add ports to existing profiles by selecting the ports on the switch panel and selecting a profile from the menu. Added the configured system name to the switch model name on the Overview page and it displays abo...

connecting GS728TXS and GC728XP with AXC761 | NETGEAR Communities

Hello,I want to connect my two switches (GS728TXS and GC728XP) to work as one.Simply plugging the AXC761-cable into some 10G-ports does not work.I need some...

Connecting XS7xxT with GS7xxTS with AXC761 DAC | NETGEAR Communities

Hello Netgear community, We have a 10G XS712T switches and a new 3 x GS752TX stack.Can we use AXC761 DAC to connect the XS712T...

How to connect M5300-52G to Intel® Network Adapter X520 Series | NETGEAR Communities

Hi..I'd like to connect M5300-52G to Intel® Network Adapter X520 Series with SFP+.I just found out intel did not accept  10gb DAC (AXC761).What...

Connect M5300 & S3300 via SPF | NETGEAR Communities

I have a direct attached SPF cable (AXC761) and have plugged it in from a M5300 to a S3300 switch. Both ends are showing as link down and there is nothing...

Connecting MS510TXPP to XS505M via AXM761 SFP+ | NETGEAR Communities

Hi, I've got a MS510TXPP and I'm trying to connect it to an XS505M via two AXM761 SFP+ modules. I've got an existing fiber cable ran between two...

Where can you buy Netgear AXC763 ProSafe 10-Gigabit SFP+ Direct Attach Cable in Australia (in stock) | NETGEAR Communities

Hi Where can you buy Netgear AXC763 ProSafe 10-Gigabit SFP+ Direct Attach Cables in Australia (in stock) without a special order been made.   Paul

AXM761 limited 5 year warranty query | NETGEAR Communities

Hey,   I have developed a fault with one of our AXM761 10gig tranceivers. I have confirmed it is the tranceiver by swapping it with known working...

Trying to get AXM761 in a M4300 to work with a TP-Link MC200CM Media Converter | NETGEAR Communities

Hello,iam trying to get my Fiber to work. On the one side there is a M4300-52G-PoE+ and on the other side a TP-Link MC200CM Mediaconverter.The Converter is 1...

AXC763 SFP+ DAC CABLE with Intel X710 | NETGEAR Communities

Is there any known compatibly issue with the AXC763 SFP+ DAC CABLE and the Intel X710 Converged Adapter? I can't seem to get a link with this. I'm...

7000 series CLI Commands | NETGEAR Communities

Hello,We have recently deployed an XSM7224S and serveral GSM7252PS switches, connected together with OM3 fiber and AXM761 GBIC modules.We're having some...

LAG with SFP+ not working | NETGEAR Communities

I have 2 switches (XS512EM and XS724EM) each with 2 AXM761 SFP+ modules and would like to connect them via LAG. The LAG works with copper cables, it does not...

Netgear-brand SFP+ Bi-directional Transceivers? | NETGEAR Communities

I have just finished integrating a small/building-scale multimode (OM3) fiber backbone using Netgear 4300-series switches. I am using Netgear AXM761...

Transceiver compatibility | NETGEAR Communities

Hello,Is the Netgear 10GBASE-SR AXM761 SFP+ Transceiver compatible with the M4300-24x24F switch ? It should be but I only see in the product overview...

Switches in the stack. There is no Agent in the Host switch. | NETGEAR Communities

Hello everyone I have this situation. I have two switches stacked and connected with an AGC761 cable. Unit1 is GS752 and unit2 is GS728. Switches are also...

GS752TS Long reset of Unit 2 switch. | NETGEAR Communities

Hellow,Long reset of Unit 2 switch.I have two GS752TS switches in stack configuration. They are connected by SFP Direct Attach Cable AGC761.Unit 1 as...

GS752TPSB Stacking | NETGEAR Communities

I'm trying to determine how to stack these switches. It states to use the following:AGC761However those don't seem to be currently manufactered However...

Fiber Connection | NETGEAR Communities

Have a GS752TXS w/ 4 10G fiber connections and a GS728TX-100NES w/ 2 10G fiber connections,  both using AXM761 modules.   On the GS752, port 49 is...

M5300-52G-POE+ // Port does not come up - Port programming failed with error 0x1 for event OPERATION | NETGEAR Communities

Hi Community, I have a GSM7252PS switch which worked fine for some months now.Since a few days the 10GBit/s uplink (via SFP AXM761) isn't...

Connecting new XS708? switch to existing GS7xx switch stack | NETGEAR Communities

I've got an existing switch stack using a GS752TS and a GS728TPS.  They're stacked using the provided AGC761 cables.(From the documentation it says they...

Cable test for SFP+ optical modules | NETGEAR Communities

Hi All, We have two XS708e installed in our collocation provider rack. We have installed into 8th port of the switches AXM761 SFP+ modules and...

GS752TS(B) | 52-Port Gigabit Stackable Smart Switch with 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 SFP Stacking Cables (AGC761) | NETGEAR Support

GS752TS(B) - 52-Port Gigabit Stackable Smart Switch with 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 SFP Stacking Cables (AGC761)

GS752TPS(B) | 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE Ports, 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 10G SFP+ Cables (AGC761) | NETGEAR Support

GS752TPS(B) - 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE Ports, 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 10G SFP+ Cables (AGC761)

DC Montessori School Chandigarh - Case Study - NETGEAR Blog

DCM School Chandigarh has upgraded its network with NETGEAR Business, improving speed, reliability, and security for staff and students.

Newegg’s Premier Gaming Arena Runs Flawlessly on NETGEAR Networking Technology - NETGEAR Blog

NETGEAR M4350 and WiFi 7 power Newegg’s Gamer Zone for seamless gaming, streaming, and live production.