Search results for: XS308Mv2

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

XS708Ev2 Firmware Version 1.00.4 - NETGEAR Support

New Features and Enhancements: Initial release. Installation Instructions Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is XS708Ev2_FW_v1.0.0.4.flash Download Link: http://www.downloads.netgear.com/files/GDC/XS708Ev2/XS708Ev2_FW_v1.0.0.4.zip Start ProSAFE Plus Configuration Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing. The ProSAFE P...

XS708Ev2 Firmware Version 1.0.0.15 - NETGEAR Support

New Features and Enhancements: Added a Switch Management Mode on the Web GUI to allow user to choose to manage the switch from Web browser only or from both Web browser and Plus Utility. Modifications: Fixed the vulnerabilities of cross-site Scripting (XSS) and cross-site request forgery (CSRF) attacks. Implemented more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). Fixed the issue where the fragmented packets cannot be forwarded. WARNING: After XS708Ev...

XS708Ev2 Firmware Version 1.6.0.15 - NETGEAR Support

New Features and Modifications: In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese (日本語). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). Implemented new access control WARNING: After XS708Ev2 is upgraded to FW version V1.6.0.15 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgarde Pr...

XS708Ev2 Firmware Version 1.6.0.17 - NETGEAR Support

New Features and Modifications: Revised some wordings on the web GUI for German language setting. WARNING: After XS708Ev2 is upgraded to FW version V1.6.0.15 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgarde Procedure: Download the new firmware 1.6.0.17 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to get t...

XS708Ev2 Firmware Version 1.6.0.30 - NETGEAR Support

New Features and Modifications: For enhanced security, the default “password” must be changed when you log in to the switch for the first time. Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only. Download Link: http://www.downloads.netgear.com/files/GDC/XS708Ev2/XS708Ev2_V1.6.0.30.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user man...

XS708Ev2 Firmware Version 1.6.0.23 - NETGEAR Support

New Features and Modifications: In the local browser interface, change page title from NETGEAR ProSAFE Plus Switch to NETGEAR XS708Ev2. In the help section of the local browser interface, links to Documentation and Support will now open up in the same language as selected for the local browser interface. Security Fixes: PSV-2018-0542 PSV-2018-0612 Bug Fixes: Access control list does not reject invalid combinations of IP and mask WARNING: After upgrading the XS708Ev2 to firmware version V2.6.0.21...

What NETGEAR modules can I use in the ProSAFE 8-Port 10-Gigabit Ethernet Web Managed Switch (Model XS708Ev2)? - NETGEAR Support

The following NETGEAR modules are supported: AGM731 AGM734 The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 AMX764 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 Last Updated:07/07/2025 | Article ID: 30525 Was this article helpful? Yes No

Which NETGEAR Smart Managed Plus Switches offer firmware in multiple languages? - NETGEAR Support

The following NETGEAR Smart Managed Plus Switches offer firmware in German and Japanese: GS108Ev3 GS108PEv3 GS116Ev2 GSS116E JGS516PE JGS524Ev2 JGS524PE XS708Ev2 XS716E For more information, see the following knowledge base articles: How can I change my user interface to Japanese or German for my NETGEAR Smart Managed Plus Switch that requires localized firmware? How can I change my user interface to Japanese or German for my NETGEAR Smart Managed Plus Switch that supports multi-language firmwar...

What are the port speeds for the NETGEAR ProSAFE 10-Gigabit Ethernet Smart Managed and Web Managed (Plus) Switches? - NETGEAR Support

Models XS708Ev2, XS716E, XS708T, and XS716T: The copper ports are compatible with 100M, 1G, and 10G speeds. The SFP+ fiber ports are compatible with 1G and 10G speeds. Models XS728T and XS748T: The copper and fiber ports are compatible with 1G and 10G speeds. The SFP+ fiber ports are compatible with 1G and 10G speeds. Last Updated:07/07/2025 | Article ID: 30378 Was this article helpful? Yes No

Security Advisory for Authentication Bypass on ProSAFE Web Managed Switches, PSV-2015-0043 - NETGEAR Support

NETGEAR is aware of a security issue that can allow an attacker to bypass authentication on some models of NETGEAR Web Managed Switches and gain access to a switch’s configuration file and password. This vulnerability only occurs when an attacker is on the same subnet as the switch. This vulnerability affects the following products: JGS516PE JGS524Ev2 JGS524PE GS105Ev2 GS105PE GS108Ev3 GS108PEv3 GS116Ev2 GSS108E GSS116E XS708Ev2 XS716E Firmware fixes are currently available for all affected prod...

How do I know if there is a loop detected on my XS716E? - NETGEAR Support

The XS716E Web Managed Switch supports loop detection, not prevention. When a loop is detected, both LEDs on the affected ports will blink at a constant speed of about 1 blink per second. Loop detection is disabled by default, but you can configure it using either the web browser-based GUI or the ProSAFE Plus Utility. For more information about configuring loop detection, see the ProSAFE 8-Port and 16-Port 10-Gigabit Web Managed Switch Models XS708Ev2 and XS716E User Manual. Last Updated:07/07/2...

Security Advisory for Insecure SOAP Access in ProSAFE Plus Configuration Utility, PSV-2017-1997 - NETGEAR Support

NETGEAR is aware of a security issue in the ProSAFE Plus Configuration Utility that allows an unauthenticated user to change settings on NETGEAR switches that the ProSAFE Plus Utility can configure. This insecure Simple Object Access Protocol (SOAP) access vulnerability can only be exploited from a computer on the local network and must be exploited while the utility is running. This vulnerability is present in the following utility versions: ProSAFE Plus Configuration Utility versions earlier t...

Security Advisory for Sensitive Information Disclosure on Some Switches, PSV-2018-0612 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a sensitive information disclosure security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware version...

Security Advisory for Missing Function Level Access Control on Some Switches, PSV-2018-0542 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a missing function level access control security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware ve...

What power supply can I use with my NETGEAR GS308v2 switch - NETGEAR Support

You must use the 12V, 0.5 amp power supply that came with your NETGEAR GS308v2 switch. Do not use any power supplies with your GS308v2 switch other than the power supply that came with your switch. Using a different power supply will damage your switch and could cause a safety hazard. This will also void your warranty. NETGEAR is aware of an error in the documentation that shipped with some GS308v2 units. Some GS308v2 Installation Guides incorrectly state that the included power supply provides ...

XS708Ev2 Statement of volatility | NETGEAR Communities

Hello, I am requesting a Statement of Volatility for the XS708ev2 switch.  

letter of volatility for the XS708Ev2 | NETGEAR Communities

I am looking for letter of volatility for the XS708Ev2. Is there a link to where I can find this? Thanks.

XS708Ev2 new firmware invalid | NETGEAR Communities

We have several several-year-old XS708Ev2 switches that have just been retired from one use and will soon be given another.  This seems like a good time...

QoS Prioritisation using DSCP/DiffServ with Linux and XS708Ev2 | NETGEAR Communities

Hello,I'm trying reduce the mean-delay (round-trip-time) of my PTP packets when going over a switch and generated traffic by increasing the DSCP priority -...

Stacking XS708v2 and GS752TPv2 | NETGEAR Communities

Hi everyone,   I had already a 10GB copper switch (XS708Ev2) but it did not have enough ports for the just remodeled office. So I purchased a...

XS708Ev2: unable to remove LAG ID 1 through Web interface | NETGEAR Communities

I configured LAG 1 for Port 1-2. LAG 2 for Port 3-4 and LAG 3 for Port 5-6. After restructuring the entire network, the LAGs are not needed anymore. I...

Does the AXM763-10000S fiber module work with the XS708Ev2 switch | NETGEAR Communities

Does the AXM763-10000S fiber module work with the XS708Ev2 switch? In one accessory list it shows that it works with this switch, in another it shoes that it...

XS708Ev2: packet drop over 1473 | NETGEAR Communities

Recntly I was bought XS708Ev2. If the size of the packet exceeds 1473, communication is not possible. Currently fimware is v1.0.0.4. I was...

Prosafe 10G copper module recommendation | NETGEAR Communities

Hi- I have a new prosafe XS708Ev2 switch and wanted to utilize the SFP+ port.I'm having a hard time finding the reccomended 10Gbase-t copper module....

Multi-Gig AutoNegotiation: Is the cable quality taken into account? | NETGEAR Communities

I have a multi-gig PCIe card in my desktop PC now - currently running at 10 gigabits and connected to my XS708Ev2 switch.   I am wondering how the speed...

Netgear XS708e connecting to cisco Catalyst 2960 | NETGEAR Communities

Hi guysI bought a Netgear XS708Ev2|ProSafe Plus 10G 8 ports switch to put it with our cisco network, but I am having trouble connecting it to cisco...