Search results for: XCM8948

M6100 Firmware Version 11.0.0.28 - NETGEAR Support

Applicable Models: M6100 XCM8903 XCM8944 XCM8948 XCM8944F XCM8924X XCM89P XCM89UP Bug Fixes since 11.0.0.25 Increased MAC based VLAN to 512. The description is incorrect for ingress filtering on GUI help page. Redistributed routes doesn't take effect if one interface's IP address is in the range of the redistributed routes in one OSPF scenario Dot1x unauthenticated-vlan command caused long delay to DHCP client. VLAN routing interface randomly goes down and observes "Failed to register router int...

M6100 Firmware Version 10.2.0.18 - NETGEAR Support

Applicable Models M6100, XCM8903, XCM8944, XCM8948, XCM8944F, XCM8924X, XCM89P, XCM89UP New Features PV(R)STP CPU Rate Limiting enhancement Single Rate Policing (RFC 2697) PIM Timer Accuracy (HAPI) PIM-SM Unhandled Events OSPF ECMP Next Hop Rework OSPF Flooding Reduction IPv4 Fragmented packets MLAG BGP Route Reflection Removing Private AS Numbers from a BGP Path OSPFv2/v3 Transit Network Hiding IPv6 enhancements BGP enhancements Introduce RSPAN – mirroring enhancements Introduce Policy-based Ro...

M6100 Firmware Version 11.0.0.40 - NETGEAR Support

Applicable Models: M6100 XCM8903 XCM8944 XCM8948 XCM8944F XCM8924X XCM89P XCM89UP New Features amd Enhancements: Compliant with California Privacy Law: Force user to change the default password on first login to the device. Known Issues: If the network is configured as DHCP mode on the previous version, after it upgrades to 11.0, the “network” interface protocol mode will change to ‘none’ and its IP will be set to ‘0.0.0.0’. And DHCP mode is enabled on management VLAN instead. The auto install i...

M6100 Firmware Version 10.2.0.21 - NETGEAR Support

Applicable Models M6100, XCM8903, XCM8944, XCM8948, XCM8944F, XCM8924X, XCM89P, XCM89UP New Features 10G fiber port doesn't come up either after reboot or fiber disconnect/reconnect on XCM8924XCPU Rate Limiting enhancement static IP address on the network interface is reset to default value after issue 'no ip address' on a routing port sflow agent IP address is in reverse order when it is displayed in MIB browser. The blade crashed and all ports status is "Detach" after reload the blade more tim...

M6100 Firmware Version 11.0.0.31 - NETGEAR Support

Applicable Models: M6100 XCM8903 XCM8944 XCM8948 XCM8944F XCM8924X XCM89P XCM89UP Bug Fixes since 11.0.0.28 GARP vlan status is not stable. Multicast packet from UBNT wifi AP caused GS716T to enter packet storm. Switch crashed in a specific 802.1x setup. Fixed 'devshell access' security issue on GUI. Download Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.The filename after extracting is m6100v11.0.0.31.stk. Download Link: http://w...

M6100 Firmware Version 11.0.0.18 - NETGEAR Support

M6100 Firmware Version 11.0.0.18 Release Notes Applicable Models M6100 XCM8903 XCM8944 XCM8948 XCM8944F XCM8924X XCM89P XCM89UP Bug Fixes since 11.0.0.14 Issue error reply when user attempt to configure sFlow on LAG due to hardware limitation. Web accepting special characters but CLI is not accepting for port description. MLAG secondary device STP port states showing incorrect even spanning tree disabled in topology. Client was not able to obtain IP address from DHCP pool, the service is no long...

M6100 Firmware Version 11.0.0.10 - NETGEAR Support

M6100 Firmware Version 11.0.0.10 Release Notes Applicable Models M6100, XCM8903, XCM8944, XCM8948, XCM8944F, XCM8924X, XCM89P, XCM89UP Bug Fixes and Enhancements since 10.2.0.21 Support for Industry Standard VLAN trunking port mode Support for RSPAN (Remote Mirroring) Support for PVST/PVST+ CPU Management IP Changes: Deprecate "network" interface. The old "network" interface still will be migrated to new 11.0.0.10, but user cannot configure it. Standardized with management VLAN 1 interface as de...

M6100 Firmware Version 11.0.0.14 - NETGEAR Support

M6100 Firmware Version 11.0.0.14 Release Notes Applicable Models M6100 XCM8903 XCM8944 XCM8948 XCM8944F XCM8924X XCM89P XCM89UP Bug Fixes since 11.0.0.12 Fixed the issue where the fiber port link goes down after the issue ‘cablestatus <unit/slot/port’’ to test cable. Fixed the issue where after removing some VLANs,those VLAN IDs are added to ‘Allowed VLANs List’ in VLAN trunking mode. Fixed the issue where VLAN interface status showing as half duplex/10M. Fixed the issue where the LED shows gree...

M6100 Firmware Version 11.0.0.11 - NETGEAR Support

M6100 Firmware Version 11.0.0.11 Release Notes Applicable Models M6100 XCM8903 XCM8944 XCM8948 XCM8944F XCM8924X XCM89P XCM89UP Bug Fixes since 11.0.0.10 Fixed the issue where SNMP Task crashes when we have a web browser walk OSPF LSDP MIB and run ‘show ip ospf neighbor’ and ‘show ip ospf database’ continuously Fixed the issue where 'show network' doesn’t show the IP address for the management VLAN. Since 11.0.0.11, ‘show network’ shows the IP address for management VLAN. But if user specifies a...

M6100 Firmware Version 11.0.0.12 - NETGEAR Support

M6100 Firmware Version 11.0.0.12 Release Notes Applicable Models M6100 XCM8903 XCM8944 XCM8948 XCM8944F XCM8924X XCM89P XCM89UP Bug Fixes since 11.0.0.11 Fixed the issue where 10G SFP+ port is unable to link up after switch reload with customer's config Changed chassis firmware synchronization to enable by default Changes and Restrictions If the network is configured as DHCP mode on the previous version, after it upgrades to 11.0.0.12, the "network" interface protocol mode will change to "none,"...

M6100 Firmware Version 11.0.0.25 - NETGEAR Support

M6100 Firmware Version 11.0.0.25 Release Notes Applicable Models M6100 XCM8903 XCM8944 XCM8948 XCM8944F XCM8924X XCM89P XCM89UP Bug Fixes since 11.0.0.18 Unknown BGP packets locked up the switch and required hard reboot to start passing traffic again. SFP ports are not coming up after reboot. There are some garbage u/s/p value in PoE log messages. TechSupport file corrupted after upload it through GUI. The port does not link up after connect XCM8924X to GS752TPS. The switch is not using the conf...

M6100 Product FAQs - NETGEAR Support

What is the NETGEAR ProSAFE M6100 Chassis Switch? The NETGEAR ProSAFE M6100 Chassis Switch consists of Gigabit access layer and 10 Gigabit distribution layer switches in the NETGEAR modular chassis switch product line. The M6100 switch series offers a high-quality, high-density chassis alternative to stackable switches in campus LAN and midsize organizations. With more than 1.4 Tbps switching and routing capacity, passive backplane, management and fabric nonstop forwarding redundancy, the M6100 ...

VLAN Internet Connection and Access To Another VLAN | NETGEAR Communities

Hello,This is my first time setting up VLANs and I need help.&nbsp; I have the following equipment and IP settings:M6100 Chassis with XCM8944 Managed...