Search results for: WC7520
We couldn’t find anything for "WC7520".
Sort by
Showing 0-0 of 0
65 Items
Sort by
Knowledge Article
WC7520 Firmware Version 2.5.0.39 - NETGEAR Support
Bug Fixes: Fixed the issue where the AP210 continuously reboots during change from standalone to managed operating mode. Fixed authentication security vulnerabilities. Fixed BSSID mismatch between AP and controller. Upgrade Instructions: Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is wc7520_m5-2.5.0.39.bin Download Link: http://www.downloads.netgear.com/files/GDC/WC7520/WC7520_V2.5.0.39.zip Log int...
Knowledge Article
WC7520 / WC7600: RADIUS configuration with Microsoft Windows Server 2012R2 Network Policy Server - NETGEAR Support
This article describes how to configure the WC7520 and WC7600 wireless controllers for RADIUS authentication with the Microsoft Windows Server 2012 Network Policy Server. The article also describes how to use Active Directory Certificate Services and how to push wireless profiles to domain-joined computers that use a group policy. The following services must already be installed on the Windows Server 2012R2: Active Directory Domain Services (AD DS) DNS DHCP For the installation of additional ser...
Knowledge Article
WC7520 Firmware Version 2.5.0.24 - NETGEAR Support
New Features: High density bandwidth : On the wireless configuration page, high density bandwidth can be configured to high, if there are more than 20 clients on a single radio and all clients are performing high bandwidth activities such as watching streaming video, or peer to peer video. By default, the density bandwidth should be Auto. When the value is set to high, the effectiveness of wireless range may be decreased. Bug Fixes: Fixed for AP reboot issues reported by WC7520 products customer...
Knowledge Article
WC7520 Firmware Version 2.3.1.5 - NETGEAR Support
WC7520 Firmware Version 2.3.1.5 North America (N.A.) & World Wide (W.W.) Releases Published May 22nd, 2012 Bug Fixes: Discovery issues between latest release of AP FWs and Controller. Client drop outs and connectivity issues with clients. LDAP authentication failure. WNDAP360 AP getting stuck in AP rebooting state and doesn't go to Connected state after adding this standalone AP to managed list Fix for race-condition where system reboot may not happen sometimes when memory goes below 100MB, poss...
Knowledge Article
WC7520 Firmware Version 2.5.0.31 - NETGEAR Support
Bug Fixes: Fixed issue where captive users are showing incorrect time when client roams. Improved Apple client’s connectivity. Improved DFS channel selection. Fixed issue where in rare cases that client is connected but cannot send data. Upgrade Instructions: Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is wc7520_m5-2.5.0.31.bin Download Link: http://www.downloads.netgear.com/files/GDC/WC7520/WC7520...
Knowledge Article
WC7520 Firmware Version 2.5.0.43 - NETGEAR Support
Bug Fixes: Fixed AP reboots. Fixed Wireless client disconnect/reconnect on WNAP210. Fixed the captive portal authentication page issue where the EULA text is not displayed properly in the Internet Explorer browser. Fixed the issue where the syslog messages from Controller and AP are not in sync. Fixed the client connectivity issues with the remote APs on a corner case. Upgrade Matrix: UPGRADE TO 2.5.0.43 FROM RECENT RELEASES Devices Firmware Upgrade From below versions to 2.5.0.43 WC7520 2.5.0.3...
Knowledge Article
WC7520 Firmware Version 2.5.0.47 - NETGEAR Support
Bug Fixes: Upgraded the LMS libraries to support TLS1.2. Fixed a condition where the wireless controller intermittently reboots when a large number of clients are connected to it. Upgrade Matrix: UPGRADE TO 2.5.0.46 FROM RECENT RELEASES Devices Firmware Upgrade From below versions to 2.5.0.46 WC7520 2.5.0.46 -> 2.5.0.47 2.5.0.45 -> 2.5.0.47 2.5.0.43 -> 2.5.0.47 Upgrade procedure for Redundancy setup: First Upgrade the Secondary controller followed by the primary controller. Upgrade procedure for...
Knowledge Article
WC7520 & WC7600: External authentication using LDAP with Active Directory - NETGEAR Support
This article describes how to configure the WC7520 and WC7600 wireless controllers to direct authentication of wireless clients to Active Directory using LDAP. This procedure should be used for basic installations where you want clients to authenticate using credentials from the LDAP server and are not concerned with restricting which accounts or OUs from Active Directory can log on. If you require a more advanced set-up, use external authentication via RADIUS, which is described in the followin...
Knowledge Article
WC7520 Firmware Version 2.5.0.46 - NETGEAR Support
Bug Fixes: Fixes for Security Vulnerability: PSV-2018-0051-Pre-Auth CI in request_handler.php via forward_ip parameter. Fixes for the issue - APs with statically set channels on 5GHz band are randomly switched to different frequency. Upgrade Matrix: UPGRADE TO 2.5.0.46 FROM RECENT RELEASES Devices Firmware Upgrade From below versions to 2.5.0.46 WC7520 2.5.0.45 -> 2.5.0.46 2.5.0.43 -> 2.5.0.46 2.5.0.39 -> 2.5.0.46 Upgrade procedure for Redundancy setup: First Upgrade the Secondary controller fol...
Knowledge Article
WC7520 Firmware Version 2.5.0.26 - NETGEAR Support
Bug Fixes: This release contains bug fixes that will increase the reliability of the AP in high RF congested areas. Known Issues: L3 roaming will have impact if the Managed APs change IP address after tunnels are established. In a working environment with External Radius Authentication, if the Authentication server is changed from External to Internal Authentication, immediately after the change clients cold connect using the older security cache. If the client disconnect to timeout, new authent...
Knowledge Article
WC7520 Firmware Version 2.5.0.05 - NETGEAR Support
Published May 6, 2013 New Features: Chinese localization support. Support for WNDAP380Rv2 Access Point. Support for WNAP210v2 Access Point. Bug Fixes: Fix for reboot issue under excessive console dump. Scheduled Radio On/Off feature fixed. Re-authentication for the Radius server fixed for the configured value. RFID information is not forwarded to server from the controller. Standalone AP firmware upgrade fails when Controller is in non-default VLAN and APs are in default VLAN. Known Issues: L3 r...
Knowledge Article
WC7520 Firmware Version 2.5.0.28 - NETGEAR Support
Bug Fixes: This release contains Bug fixes for connectivity issues with Apple iOS Clients like iPhone and iPad. Known Issues: L3 roaming will have impact if the Managed APs change IP address after tunnels are established. In a working environment with External Radius Authentication, if the Authentication server is changed from External to Internal Authentication, immediately after the change clients cold connect using the older security cache. If the client disconnect to timeout, new authenticat...
Knowledge Article
WC7520 Firmware Version 2.5.0.35 - NETGEAR Support
Bug Fixes: , Stack password across primary and secondary members have to be same. , AP Led state fixes. , Allow UK zipcodes while registering the product information. , DHCP server bug fixes. , Captive portal bug fix. , Security fixes that takes care of some reported vulnerabilities in accessing controller through UI. Upgrade Instructions: Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is wc7520_m5-2....
Knowledge Article
WC7520 Firmware Version 2.5.0.14 - NETGEAR Support
Published December 17, 2013 New Features: Chinese localization support. Support for WNDAP380Rv2 Access Point. Support for WNAP210v2 Access Point. Bug Fixes: Fix for reboot issue under excessive console dump. Scheduled Radio On/Off feature fixed. Re-authentication for the Radius server fixed for the configured value. RFID information is not forwarded to server from the controller. Standalone AP firmware upgrade fails when Controller is in non-default VLAN and APs are in default VLAN. Data connect...
Knowledge Article
WC7520 Firmware Version 2.5.0.45 - NETGEAR Support
Bug Fixes: Fixes for Russian time zone issue and removed DST from Russia. Fixed security flaw: Glibc stack-based buffer overflow in getaddrinfo() (CVE-2015-7547) Fixed security vulnerabilities in WPA2 handshake mechanism Upgrade Matrix: UPGRADE TO 2.5.0.45 FROM RECENT RELEASES Devices Firmware Upgrade From below versions to 2.5.0.45 WC7520 2.5.0.43 -> 2.5.0.45 2.5.0.39 -> 2.5.0.45 Upgrade procedure for Redundancy setup: First Upgrade the Secondary controller followed by the primary controller. U...
Knowledge Article
WC7520 Firmware Version 2.4.0.26 - NETGEAR Support
WC7520 Firmware Version 2.4.0.26 North America (N.A.) & World Wide (W.W.) Releases Published July 26, 2012 New Features: Remote AP support for Branch office deployments. Support for WNDAP380R Access Point + RFID. RFID configuration and monitoring. Bug Fixes: Improvement in Background scan logic to avoid client connectivity disruptions Fix for reboot issue under excessive alarms. Allowed hyphen for domain and username for LDAP configuration on controller. Fixed for the performance issue. At high ...
Knowledge Article
Requirements for Autodiscovery of Remote Access Points using WC7520 Wireless controller - NETGEAR Support
The wireless controller can discover remote access points over a site-to-site VPN connection or behind a remote NAT router without a VPN connection. Before attempting to autodiscover remote access points the following guidelines should be met: • All standalone access points need to have SNMP and SSH enabled. • The following ports need to be unblocked in the firewall at the site where the wireless controller is located in order for the remote access points to communicate with the wireless control...
Knowledge Article
Migrating a managed access point to WC9500 from WC7500/WC7520/WC7600 - NETGEAR Support
The following steps outline the process of migrating access point(s) to a WC9500 from any of these model controllers: EC7500, WC7520 or WC7600. In this example we use the following devices to display the migration: Existing controller: WC7600 - IP address 192.168.0.250 New controller: WC9500 - IP address 192.168.0.150 Access point (AP) : WNAP320 - IP address 192.168.0.51 The access point is contolled by WC7600. This is visible at Access Point - Discovery - Managed AP List. On the AP web gui we c...
Knowledge Article
How to add a license key on ProSAFE Wireless Controller Models WC7520, WC7500, WC7600, WC7600v2, and WC9500 - NETGEAR Support
Before you apply your license key, please ensure the wireless controller has a working internet connection. To achieve this, make sure that DNS Server and Default Gateway addresses for your network are set correctly in the wireless controller web interface. Check DNS and Default Gateway settings Open a web browser, and in the browser’s address field, type the wireless controller’s IP address. By default, the IP address is 192.168.0.250. The wireless controller’s login window opens. Navigate to C...
Showing 1-20 of 65
We couldn’t find anything for "WC7520".
Sort by
Showing 0-0 of 0
1 Item
WC7520 | ProSAFE 20-AP Wireless Controller | NETGEAR Support
WC7520 - ProSAFE 20-AP Wireless Controller
Showing 1-1 of 1
We couldn’t find anything for "WC7520".
Showing 0-0 of 0