Search results for: WAC104

WAC104 Firmware Version 1.0.4.9 - NETGEAR Support

Note: Please check “Upgrade rules” section before upgrading. Issues Fixed: Fixed security vulnerability in WPA2 handshake mechanism Known Issues: WDS partner’s wireless station’s SSID is not displayed in master AP under the attached device wireless station list page and vice versa. Download Link : http://www.downloads.netgear.com/files/GDC/WAC104/WAC104-V1.0.4.9.zip Upgrade Rules: If AP is out of box with FW version lower than V1.0.4.1, please follow the Firmware upgrade procedure before upgradi...

WAC104 Firmware Version 1.0.4.21 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/ Known Issues: SSID of the repeater and base do not display on each other's Attached Devices page when configured in WDS mode. Download Link: https://www.downloads.netgear.com/files/GDC/WAC104/WAC104_firmware_V1.0.4.21.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find you...

WAC104 Firmware Version 1.0.4.1 - NETGEAR Support

NOTE: Before upgrading firmware to V1.0.4.1 from previous version, please follow mandatory steps below, Backup configuration file -> factory defaults after upgrade -> restore the configuration file to avoid configuration getting lost. Clear the browser cache. New Features and Enhancements: Intial Release. Known Issues: Attached Device wireless station list page displays the 2.4GHz / 5GHz SSID on which WDS is established, instead of showing exact SSID on which wireless station is associated with ...

WAC104 Firmware Version 1.0.4.15 - NETGEAR Support

Enhancements: Initial setup enhancements for ease of configuration. Now WiFi clients can access the AP local device UI via www.aplogin.net & www.aplogin.com Bug Fixes: Unable to change admin password on the Safari browser. Known Issues: SSID of the satellite and base do not display on each other's Attached Devices page. Download Link : https://www.downloads.netgear.com/files/GDC/WAC104/WAC104_firmware_V1.0.4.15.zip Firmware Update Instructions: To update your product’s firmware, follow the instr...

WAC104 Firmware Version 1.0.4.17 - NETGEAR Support

Enhancements: Now supports Australia and New Zealand in the European SKU. Known Issues: SSID of the repeater and base do not display on each other's Attached Devices page when configured in WDS mode. Download Link: https://www.downloads.netgear.com/files/GDC/WAC104/WAC104_firmware_V1.0.4.17.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model n...

WAC104 Firmware Version 1.0.4.12 - NETGEAR Support

New Features and Enhancements: Increased the password complexity. User must change the default password for compliance with new CA state law. Added UPnP support. Known Issues: SSID of wireless station and master do not display on each other's attached device wireless station list pages. Download Link : http://www.downloads.netgear.com/files/GDC/WAC104/WAC104-V1.0.4.12.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To fi...

WAC104 Firmware Version 1.0.4.20 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/ Known Issues: SSID of the repeater and base do not display on each other's Attached Devices page when configured in WDS mode. Download Link: https://www.downloads.netgear.com/files/GDC/WAC104/WAC104_firmware_V1.0.4.20.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find you...

WAC104 Firmware Version 1.0.4.8 - NETGEAR Support

Note: Please check “Upgrade rules” section before upgrading. New Features and Enhancements: DHCP client is enabled by default. Default SSID is secured. Easy AP access using “aplogin.net” from wireless clients. Bug Fixes: Fixed issue where the AP is not accessible across different subnet. Fixed issue related to language localization. Fixed issues related to wireless schedule on/off feature. Known Issues: Attached Device wireless station list page displays the 2.4GHz / 5GHz SSID on which WDS is es...

WAC104 Firmware Version 1.0.4.13 - NETGEAR Support

Bug Fixes: Addresses security issues. Known Issues: SSID of the wireless station and master do not display on the list of wireless stations on each other's attached devices page. Download Link : https://www.downloads.netgear.com/files/GDC/WAC104/WAC104_firmware_V1.0.4.13.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search ...

WAC104 Firmware Version 1.0.4.19 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/ Known Issues: SSID of the repeater and base do not display on each other's Attached Devices page when configured in WDS mode. Download Link: https://www.downloads.netgear.com/files/GDC/WAC104/WAC104_firmware_V1.0.4.19.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find you...

How do I connect to my WAC104 for the first time? - NETGEAR Support

After you set up your WAC104 access point, you can use several methods to connect and log in to the access point for initial configuration. You can use WiFi to connect your computer or mobile device to the access point or you can use a computer and an Ethernet cable to connect to a LAN port on the access point. Connect over Ethernet Using a Directly Connected Computer This section describes your computer connecting directly to an Ethernet port on the access point using an Ethernet cable. You mig...

Security Advisory for Security Misconfiguration on WAC104, PSV-2021-0124 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a security misconfiguration security vulnerability on the following product models: WAC104, running firmware versions prior to 1.0.4.15 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, then select your model from the drop-down menu as soon as it appears. If you do not see a ...

Security Advisory for Authentication Bypass on WAC104, PSV-2021-0106 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for an authentication bypass security vulnerability on the following product models: WAC104, running firmware versions prior to 1.0.4.15 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, then select your model from the drop-down menu as soon as it appears. If you do not see a dro...

Security Advisory for Authentication Bypass on the WAC104, PSV-2021-0075 - NETGEAR Support

NETGEAR has released a fix for an authentication bypass security vulnerability on the WAC104. NETGEAR strongly recommends that you download the latest firmware as soon as possible. Firmware fixes are currently available for all affected products: WAC104 running firmware versions 1.0.4.13 and earlier To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, then select your model from the drop-down menu as soon as it appears...

Security Advisory for Post-Authentication Buffer Overflow on WAC104, PSV-2020-0319 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a post-authentication buffer overflow security vulnerability on the following product models: WAC104, running firmware versions prior to 1.0.4.13 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, then select your model from the drop-down menu as soon as it appears. If you do ...

Security Advisory for Pre-Authentication Stack Overflow on WAC104, PSV-2022-0007 - NETGEAR Support

Associated CVE IDs: None First published: 3/31/2022 NETGEAR has released fixes for a pre-authentication stack overflow security vulnerability on the following product models: WAC104, running firmware versions prior to 1.0.4.20 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, then select your model from the drop-down menu as soon ...

Security Advisory for Pre-Authentication Stack Overflow on WAC104, PSV-2022-0008 - NETGEAR Support

Associated CVE IDs: None First published: 3/31/2022 NETGEAR has released fixes for a pre-authentication stack overflow security vulnerability on the following product models: WAC104, running firmware versions prior to 1.0.4.20 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, then select your model from the drop-down menu as soon ...

Security Advisory for Pre-Authentication Buffer Overflow on WAC104, PSV-2021-0345 - NETGEAR Support

Associated CVE IDs: None First published: 3/31/2022 NETGEAR has released fixes for a pre-authentication buffer overflow security vulnerability on the following product models: WAC104, running firmware versions prior to 1.0.4.20 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, then select your model from the drop-down menu as soon...

How do I manually update the firmware on my WAC104 access point? - NETGEAR Support

You can manually update your WAC104's firmware by checking for firmware updates through the local browser user interface or by downloading your firmware from NETGEARs support page. To manually update the firmware on your WAC104 access point from the NETGEARs support page: 1. Download the latest firmware version. 2. Connect your computer to the same network as the access point or connect your computer to the access point through an Ethernet cable or WiFi connection. 3. Launch a web browser. 4. En...

How do I change the SSID security settings on my WAC104 access point? - NETGEAR Support

By default, the WAC104 access point has an SSID of NETGEAR_11N on the 2.4GHz radio and NETGEAR_11AC on the 5GHz radio. The passphrase for both is sharedsecret. Security is not set on either radio by default, meaning that wireless access is open to the access point. We recommend changing the SSID and setting security. To change the SSID and security settings on your WAC104: Connect your computer to the same network as the access point or connect your computer to the access point through an Ethern...

WAC104 Access Point thinks its 1970 | NETGEAR Communities

I am having the same issue, Firmware Version V1.0.4.21 The WAC-104 time configuration webpage only allows you to select a time zone and select daylight...

WAC104 dropping connections disassociated deauthenticated and DHCP issues | NETGEAR Communities

Sort of an old thread, but I think it may be similar to an issue I have been having with my  WAC104.  The first issue (that I noted in another...

WAC104 no https on admin interface | NETGEAR Communities

Hi, I'm trying to get https on the admin interface, so I don't expose password and other sensitive information on the network where my WAC104 is...

WAC104 Access Point - how to change Netbios group | NETGEAR Communities

I have a WAC104 Wireless Access point. Firmware 1.0.4.21. Is there a way to change the Netbios group? It shows up as "Workgroup" by default and I'd like to...

How to connect as admin to remote Netgear WAC104 802.22ac Wireless Access Point on my local network | NETGEAR Communities

On my home office network I have...- Main Router: Linksys EA5800 AC1000 Dual-Band Smart Wi-Fi Router- Remote Access Point: Netgear WAC104 802.22ac...

Add WAC104 to RBR20 | NETGEAR Communities

I have an existing Orbi network consisting of an RBR20 and RBW30. I have a WAC104 and I was wondering how I can use this to extend my network. I want to use...

Use M1 (MR1100) with Access Point (WAC104) | NETGEAR Communities

Hello,First as short as possible background: Im trying to help a friend remotely who lives in the US (Im from Europe)... She lives in rural area and we have...

WAC104 dropping connections disassociated deauthenticated and DHCP issues (possibly solved) | NETGEAR Communities

Sorry for a long post, and if this issue has been raised and answered. But I've had wireless connection issues on a WAC104, and believe I found the cause.I...

WAC124 AP/router - cannot login | NETGEAR Communities

We have two WAC124s, both configured as access points and connected via ethernet to the router.These were straightforward to configure when we bought them...

WAC124 Can't Login | NETGEAR Communities

I have been trying to login to my WAC124 via 192.168.1.100. It prompts me for my login and then it pops up with the same login screen. How do I fix this?

AP WAC124 doesn't work after upgrade! | NETGEAR Communities

Hello,   I updated my WAC124 AP from WAC124-V1.0.4.4 to WAC124-V1.0.4.9 via webgui, but it stuck without completing the update. So I tried an older...

WAC124 | NETGEAR Communities

I have a #WAC124 which has been resetIt is now operating correctly with SSID Netgear 1 and password  sharedsecret, the defaults.I must set a new...

No Router Login | NETGEAR Communities

I have an old AC2000 Dual Band Wireless Access Point, WiFi Router (WAC124) which is working fine. although I am just using it as an access point. I was...