Search results for: GS105PE

GS105PE: PoE troubleshooting - NETGEAR Support

The GS105PE is a PoE passthrough switch which can only be powered by Power Over Ethernet (does not accept AC power). GS105PE can be powered by either IEEE 802.3af or IEEE 802.3at from either a PoE switch or a PoE injector. When powered by IEEE 802.3af: The GS105PE can power up only one Class 1/2 PoE device. When powered by IEEE 802.3at: The GS105PE can power up only one Class 0/3 PoE device or two class 1/2 devices. Note on 802.3at interop issues with certain Cisco switches: Interop problems hav...

GS105PE Firmware Version 1.6.0.17 - NETGEAR Support

Bug Fixes: Fixes the issue where port 5 incorrectly adjusts PoE power requests from the powered device (PD). Fixes the issue where a subnet mask length set below 24 causes the switch to reject IP addresses using the following patterns: x.x.x.255 and x.x.x.0. Example: If the subnet mask length is IP address/22, it rejects 172.16.16.255/22 and 172.16.17.0/22. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.net...

GS105PE Firmware Version 1.4.0.9 - NETGEAR Support

New Features and Enhancements: Added the option to disable/enable Plus Utility Management under Web GUI. Bug Fixes: Fixed the interoperability issue when GS105PE is being powered by PoE+ PSE Juniper EX2200-C. The symptom is that GS105PE would initially show it is being powered by 802.3at (ie. right LED of port 5 is green color). Then, it would change to 802.3af power (ie. right LED of port 5 turns to yellow color) a few seconds later. Fixed the security vulnerability issue related to XSS (Cross-...

GS105PE Firmware Version 1.4.0.2 - NETGEAR Support

Bug Fixes: Fixed the problem where the configuration file saved from Web GUI cannot be restored via ProSAFE Plus Configuration Utility and vice versa Note: Please upgrade your ProSAFE Plus Configuration Utility to version V2.3.5 in order to use the configuration file saved using Web GUI from v1.4.0.2 firmware Limitations: Switch configuration will be kept after upgrading the firmware to v1.4.0.2, but the configuration file previously saved on the PC cannot be restored after the FW is upgraded to...

GS105PE Firmware Version 1.6.0.4 - NETGEAR Support

Modifications: Web GUI title changes to NETGEAR GS105PE Security Fixes: PSV-2018-0538 PSV-2018-0542 PSV-2018-0612 For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Access control list allows invalid combinations of IP and mask settings. WARNING: After GS105PE is upgraded to FW version V1.6.0.3 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/...

GS105PE Firmware Version 1.5.0.5 - NETGEAR Support

Fixes and Modifications: Fixed the issue that there is a chance where link cannot be established with random port after power cycle WARNING: Once GS105PE FW is upgraded to V1.5.0.4, it is imperative to upgrade the bootloader also. Please login to switch using web GUI. V1.5.0.4 FW will prompt you automatically for the required bootloader version. Please make sure you pick the right version. Incorrect version will cause the switch to become inoperable. Once you have upgraded both FW and bootloader...

GS105PE Firmware Version 1.6.0.10 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Download Link: https://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.6.0.10.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. When the GS105PE is upgraded to firmware version...

GS105PE Firmware Version 1.3.0.3 - NETGEAR Support

New Features & Enhancements: Fixed the problem that DHCP mode shows disabled on Web GUI even though it is actually enabled. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is GS105PE_V1.3.0.3.bin Download Link: http://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.3.0.3.zip Last Updated:10/17/2025 | Article ID: 25659 Was this article helpful? Yes No

GS105PE Firmware Version 1.5.0.4 - NETGEAR Support

New Features and Enhancements: Implemented new and more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). Bug Fixes: Fixed the interoperability issue when trying to power GS105PE with certain devices like HP PoE+ injector J9867A and PoE+ PSE FORTINET FORTISWITCH 124D. The symptom is that GS105PE would initially show it is being powered by 802.3at (right LED of port 5 shows green color). Then, it would change to 802.3af power (right LED of port 5 turns to y...

GS105PE Firmware Version 1.6.0.6 - NETGEAR Support

New Features: The default admin password must be changed to a unique password after the first login. Modifications: Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only. Download Link: http://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.6.0.6.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. After GS105PE is upgraded to FW version...

GS105PE Firmware Version 1.6.0.3 - NETGEAR Support

New feature and Modifications: In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese (日本語). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). Implemented new access control WARNING: After GS105PE is upgraded to FW version V1.6.0.3 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgrade Proce...

GS105PE Firmware Version 1.3.0.1 - NETGEAR Support

New Features & Enhancements: Supports Web GUI management. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is GS105PE_V1.3.0.1.bin Download Link: http://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.3.0.1.zip Last Updated:10/17/2025 | Article ID: 25396 Was this article helpful? Yes No

GS105PE Firmware Version 1.4.0.6 - NETGEAR Support

New Features and Enhancements: Added the option to disable/enable power saving mode. Bug Fixes: Changed the Flow Control (System > Status > Switch Status) default setting from enabled to disabled. Fixed the problem where the port 1 will link at 100M instead of 1000M after upgrading the firmware to version v1.4.0.2. Fixed the PoE interoperability issue with certain PoE+ PSE or injector devices like Meraki MS220-8P, Intellinet 560566, and HP JG350A. GS105PE will initially show it is being powered ...

GS105PE FAQs - NETGEAR Support

What is GS105PE? This is a 5-port Gigabit switch with PoE Pass Through. It belongs to NETGEAR’s 2nd generation of ProSAFE Plus Switch. What is PoE Pass Through? PoE pass through is getting power from PSE (Power Source Equipment) (eg. GS752TP, the PoE Smart Switch) and provides surplus power to other PoE PDs (Powered Devices). Can it be powered by an external power adaptor? No, it can only be powered by a PSE . Can it be powered by an IEEE802.3af or IEEE802.3at PoE switch? Either. How many PoE an...

How can I change the language of my NETGEAR GS105Ev2 or GS105PE Smart Managed Plus Switch user interface? - NETGEAR Support

Before continuing, download and install the ProSAFE Plus Configuration Utility from NETGEAR Support. The most recent firmware for your GS105Ev2 or GS105PE Smart Managed Plus Switch can display its user interface in multiple languages, like English, German, or Japanese. You can change the display language at any time. To change your user interface language: Connect your computer to the same network as the switch. You can use a WiFi or wired network connection, or connect directly to a switch that...

GS105Ev2 Firmware Version 1.6.0.11 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Download Link: https://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.6.0.11.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. When the GS105PE is upgraded to firmware version V1.5.0.4 or higher, it cannot work with any Plus Utility version prior to V2.4.3. Please download the lat...

ProSAFE Plus Configuration Utility v2.3.5 - NETGEAR Support

New Features and Enhancements: Updated OpenSSL library to version 0.9.8ze Updated Adobe AIR to version 17.0.0.124 Bug Fixes: Removed wording (One-to-One) from GSS116E Port Mirroring page (System > Monitoring > Mirroring) since it can support many-to-one port mirroring Fixed the issue where GS105Ev2 & GS105PE configuration saved by web GUI cannot be restored via ProSAFE Plus Configuration Utility, and vice versa. Note: GS105Ev2 & GS105PE FW need to be v1.4.0.2 and later version. Notes: If this er...

Security Advisory for Pre-Authentication Buffer Overflow on Some Switches, PSV-2018-0538 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a pre-authentication buffer overflow security vulnerability on the following product models: GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS408EPP, running firmware versions prior to 1.0.0.15 GS808E, running firmware versions prior to 1.7.0.7 GS908E, running firmware versions prior to 1.7.0.3 GSS108E, running firmware versions prior to 1.6.0.4 GSS108EPP, running firmware versions p...

Security Advisory for Sensitive Information Disclosure on Some Switches, PSV-2018-0612 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a sensitive information disclosure security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware version...

GS105Ev2 Firmware Version 1.6.0.10 - NETGEAR Support

New Features: Added a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Switch Managed Mode). Default is Disable. Security Fixes: Various security vulnerability fixes and enhancements. Download Link: https://www.downloads.netgear.com/files/GDC/GS105EV2/GS105Ev2_V1.6.0.10.zip Firmware Update Instructions: Important: Read and follow these instructions before updating your firmware. When the GS105PE is upgraded to firmware versi...

Netgear GS105PE firmware upgrades | NETGEAR Communities

I have a number of Netgear GS105PE switches in my network which were all running FW V1.6.0.6.  They were all happily behaving themselves (I know if it...

GS105PE Not allowing firmware upgrade | NETGEAR Communities

When I try to put the switch into bootloader mode to upgrade the firmware, the switch stops responding to pings, and refuses to allow me to do anything with...

Is the GS105PE discontinued | NETGEAR Communities

And if so is there an alternative? Thanks

Questions about GS105PE and pole pass through | NETGEAR Communities

Hello,I search for 2 switches to replace my 2 older broken unmanaged TP-Link omes.And I think I will go to the GS108PE and the 105PE.On the 105, I Will...

Issues with PoE+ with GS105PE | NETGEAR Communities

Hello,I bought a GS105-PE and a Ubiquiti Gigabit PoE+ 30W injector with the 802.3at standard, but the switch is always falling back on 802.3af standard. But...

Netgear ProSafe GS105PE - POE Port provides power, but no ethernet | NETGEAR Communities

Being powered by HP 2920-24G POE+Port 4 has a PC that is getting ethernetPort 2 has a Shotetel 230 (Class 2) - Port 2 is providing Power to the phone,...

GS105PE default password isn't working | NETGEAR Communities

Hi, I recently purchased a brand new GS105PE switch, but I can't login to the admin page. According to the manual tha came with the device, as well as...

GS105PE VLAN trunking not working | NETGEAR Communities

I’m trying to set up a GS105PE in the garage. I intend to add an Orbi Pro Wifi6 satellite there and we already have a POE camera in position.The GS105PE...

GS105PE firmware 1.6.0.10 (almost) bricked my device | NETGEAR Communities

Any suggestions on how to "unbrick" our GS105PE? It had firmware version v1.5.0.4, I just downloaded v1.6.0.10, went to the switch's web interface,...

Setting up a Cisco Trunk Uplink to a GS105PE - Just configs - and How to | NETGEAR Communities

I purchased several GS105PE switches to utilize where I have no AC power, for several devices. The catch is I have to 802.1Q trunk vlans to this switch. I...

GS105PE PoE+ Injector | NETGEAR Communities

Not sure if a certain requirements that are not written for GS105PE PoE,but I was not able to get it fully powered (green led on port 5) with 802.3at POE+...

GS105PE - Non-PoE device on PoE port? | NETGEAR Communities

Hi, I have a PoE device connected and powered by pass through (PoE PSE) on Port 1 of the GS105PE. Is it possible to connect a non-PoE device (PoE...

GS105PE POE Pass Thru Limits | NETGEAR Communities

Just purchased the GS105PE-10000S to manage two Speco 12W Class 0 Cameras using POE Passthrough, but POE Passthrough is "disabled" Firmware is...

GS105PE does not restore PoE after power cycle | NETGEAR Communities

Hi,Issue: Port 1 & 2 both lose power after a switch power cycle. If I then manually do a factory reset or reboot, it works again. I have...

Remote Authentication to Netgear ProSafe GS105PE | NETGEAR Communities

Hello,I'm looking into finding the correct header and payload infomation to change some settings on the GS105PE. I'm looking to update the VLAN IDs...

Netgear GS105PE will not load new bootloader | NETGEAR Communities

I bought three GS105PE switches, let me call them switches 6,7 & 8I purchased Switch 6 in May 2019 and it came with Bootloader V1.4.0.5-VB, firmware...

GS105PE * Need new Bootloader | NETGEAR Communities

Bought a new switch but it came with firmware 1.3.0.3. Used the Utility to upgrade the firmware to 1.6.0.3, but the bootloader didn't get changed. I have 2...

GS105PE - PoE Passtru works only after Reset-button pressed | NETGEAR Communities

I have a GS105PE, it is powered by a UniFi Switch 8 POE-60W, 802.3af. Then I passtru to a UniFi AP-AC-LITE. I have to push the netgear reset button to...

GS105PE PoE Daisy Chain | NETGEAR Communities

Hi, I need (or rather want :smileyvery-happy:) to install two switches in a place where there is no power. My existing network consists of an...

GS105PE Firmware Update fails at Bootloader stage | NETGEAR Communities

I have tried to upgrade my switch to the lastest FW downloaded from http://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.5.0.4.zip.I have...