Search results for: APM402XL

Which slots should I use in my NETGEAR M4300-96X for APM402XL port cards using 40GBASE-LR4 transceiver modules? - NETGEAR Support

Which slots should I use in my NETGEAR M4300-96X for APM402XL port cards using 40GBASE-LR4 transceiver modules?We recommend that you place all APM402XL port cards using 40GBASE-LR4 transceiver (txcvr) modules in the upper slots (1 to 6) of your NETGEAR M4300-96X. 40GBASE-LR4 txcvr modules use more energy and produce more heat than other module types. The M4300-96X's upper slots provide the best cooling and optimal thermal conditions.APM402XL port cards with 40GBASE-LR4 txcvr modules can be used ...

How do I view and configure expandable port settings for my APM402XL port card on my M4300-96x switch using the web interface? - NETGEAR Support

This procedure explains how to view and configure expandable ports using your switch's web browser-based user interface. You can also view and configure the expandable ports using your switch’s command line interface. For more information, see What CLI commands can I use to view and configure expandable port settings for my APM402XL port card on my M4300-96x switch?. To view and configure expandable ports information: Launch a web browser. In the address field of your web browser, enter the IP a...

Which 40G modules and cables has NETGEAR cleared to work with the APM402XL? - NETGEAR Support

Overview: In the tables below, you can find a list of modules, cables, and connectors that NETGEAR tested to work with the APM402XL port card in the M4300-96X switch. These parts can be used in Ethernet mode (default) and stacking mode, unless otherwise noted. 40G Modules: Product Product Model Description AXLM762 AXLM762-10000S 40GBASE-LR4 Duplex LC (one duplex SMF link) 10km QSFP+ Transceiver AXLC761 AXLC761-10000S 40G QSFP+ to QSFP+ 40GBASE-CR4 1 Meter Passive DAC Cable AXLC763 AXLC763-10000S...

What CLI commands can I use to view and configure expandable port settings for my APM402XL port card on my M4300-96X switch? - NETGEAR Support

This article describes the commands that you can use to view and configure expandable port settings. To perform the same functions using your switch’s web browser-based user interface, see How do I view and configure expandable port settings for my APM402XL port card on my M4300-96x switch using the web interface?. By default, the 40G ports on the APM402XL port card (that is, port 1 and port 5) are active, which means that they are in the attached state, can be detected, and you can use them. Th...

M4300 Firmware Version 12.0.6.6 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New features in 12.0.6.6: Supports new module APM402XL which has 40G QSFP ports for M4300-96X Supports UPnP and Bonjour to allow management station to discover the IP address of management VLAN or Service port. Adds ‘time-a.netgear.com’ and ‘time-c.netgear.com...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

Which port cards are compatible with my NETGEAR M4300-96X switch and how do I install them? - NETGEAR Support

The following port cards are compatible with your M4300-96X switch: APM408C. Provides eight 100M/1G/2.5G/5G/10GBASE-T ports APM408P. Provides eight 100M/1G/2.5G/5G/10GBASE-T PoE+ ports APM408F. Provides eight 1G/10GBASE-X SFP+ ports that support 1G and 10G transceiver modules (GBICs) or direct-attach cables (DACs) APM402XL. Provides two fiber 40GBASE ports that support QSFP+ modules or 40G direct-attach cables (DACs) Port cards are hot-swappable. To install a port card in your M4300-96X switch: ...

M4300 Firmware Version 12.0.7.10 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed since 12.0.7.9: mDNS protocol packets are not flooded in the VLAN when Apple Bonjour protocol is enabled Stack port packet counter was miscalculated which resulted in displaying excessive packet drops Add BitRate info to 'show interface counter' out...

M4300 Firmware Version 12.0.7.15 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bug Fixes: Rx discard counter increase on M4300 stack ports m4300, Dante controller fails to discover Dante devices on the network via mDNS Bonjour/mDNS is NOT forwarding over LAG SSLv3 is insecure therefore SSLv3 support is removed Registered multicast traffi...

M4300 Firmware Version 12.0.7.7 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Enhancements in 12.0.7.7: Security enhancement to protect from Cross-Site Request Forgery (CSRF) attack. Provide protection of Cross-Site Scripting(XSS) attack through HTML Entity Encoding. Upgrade OpenSSL from 1.0.2e to 1.0.2o, and SSLv2 upgraded to SSLv3. SS...

M4300 Firmware Version 12.0.9.4 - NETGEAR Support

Bug Fixes: Switches in a stack setup randomly reboot 1 to 2 times per month. Link on the switch is down when the speed is changed from 1G to 100MB on the remote device. Change default QoS trust mode from dot1p to ip-dscp (from 'classofservice trust dot1p' to 'classofservice trust ip-dscp'): When customer does image upgrade to 12.0.9.4 or later releases, default/explicitly configured QoS dot1p (in the old image) will be changed to ip-dscp. If customer wants dot1p QoS mode, then customer has to ex...

What 40GBASE-X transceiver modules and cables are compatible with the QSFP+ ports on my M4300-96X switch? - NETGEAR Support

To enable very high-speed fiber and long-distance connections on the switch, port cards with Quad Small Form-Factor Pluggable Plus (QSFP+) fiber ports accommodate standard 40G transceiver modules (gigabit interface converters, or GBICs), break-out cables, and direct attach cables (DACs), which are sold separately from the port cards. At this time, NETGEAR does not offer any QSFP+ transceiver modules or cables. However, you can obtain any third-party, IEEE-compliant, 40GBASE-X transceiver module ...

M4300 Firmware Version 12.0.7.9 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed since 12.0.7.8: High bandwidth video multicast stream seeing display playback issue when deployed with switch in stacking mode Cut-thru mode is not present in data center mode. To enable cut-thru mode, enable the following SDM templates: data-center...

M4300 Firmware Version 12.0.7.8 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed since 12.0.7.7: The port on M4300-96X still displays in 40Gbps speed after set port mode to 4x10G fan-out mode The Tech-Support file is missing critical IGMP info Invalid Port Media Type shows up at combo ports in WEB UI The link on M4300-96X 40G po...

M4300 Firmware Version 12.0.8.8 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New Features and Enhancements: First image to support new M4300 hardware models M4300-16X, M4300-24XF & M4300-48XF IGMP Snooping enhancement so that NETGEAR switches can be used as a plug-and-play for audio and video applications. Support PTP end to end Transp...

M4300 Firmware Version 12.0.7.12 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New Features and Enhancements: Reduce M4300-8X8F fan noise during system reboot cycle Condense outputs for two show stack commands to show only ports that are configured in the stacking port mode Change Ethernet MTU default to jumbo frame size 9216 Enhance ‘sh...

M4300 Firmware Version 12.0.8.15 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New Features and Enhancements: First image to support HDMI Card IO module TPM404H Supports new M4300 hardware models M4300-16X, M4300-24XF & M4300-48XF IGMP Snooping enhancement so that NETGEAR switches can be used as a plug-and-play for audio and video applic...

M4300 Firmware Version 12.0.7.17 - NETGEAR Support

Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bug Fixes: After LAG logical interface is disabled, you can still enable individual port members without admin enabling the LAG interface first. Traffic loss when firmware upgrade/reboot on M4300 stack PTP Master clock election fails after adding new device to...

How do slot-based port numbering and configuration work on my M4300-96X switch? - NETGEAR Support

This article describes how slots and ports are numbered on your M4300-96X switch and how port-based PoE and stacking work in different switch configurations. Slot-based port numbering All physical ports on switch model M4300-96X are based on slots. Because this model supports 12 slots and each port card provides eight ports, the port numbering is in the format unit number/slot number/port number. APM408C, APM408P, and APM408F port cards For the APM408C, APM408P, and APM408F port cards, the numbe...

M4300 Firmware Version 12.0.9.3 - NETGEAR Support

Applicable Models: M4300-12X12F (XSM4324S) M4300-16X (XSM4316PA) M4300-16X (XSM4316PB) M4300-24X (XSM4324CS) M4300-24X24F (XSM4348S) M4300-24XF (XSM4324FS) M4300-28G (GSM4328S) M4300-28G-PoE+ (GSM4328PA) M4300-28G-PoE+ (GSM4328PB) M4300-48X (XSM4348CS) M4300-48XF (XSM4348FS) M4300-52G (GSM4352S) M4300-52G-PoE+ (GSM4352PA) M4300-52G-PoE+ (GSM4352PB) M4300-8X8F (XSM4316S) M4300-96X(XSM4396S) New Features and Enhancements: Compliant with California Privacy Law: Force user to change the default pass...

M4300-96x with 40Gb apm402xl module Not linking with Intel XL710-Q2 | NETGEAR Communities

Hello,  I have an M4300-96X with a APM402Xl 40GB module in it.  I am connecting it to an intel XL710-Q2 network card using the AXLC763 direct...

Problem with REST-API on M4300 | NETGEAR Communities

I have a switch with6 x APM408P on Slot 1-64 x APM408C on Slot 7-10 and2 x APM402XL QSFP+ on Slot 11+12 if I try to get the VLAN configuration with...