Search results for: XSM4396K0
We couldn’t find anything for "XSM4396K0".
Sort by
Showing 0-0 of 0
21 Items
Sort by
Knowledge Article
How do I upgrade the M4300-96X (XSM4396S) CPLD code? - NETGEAR Support
The CPLD code upgrade procedure for the XSM4396S is complex. If you do not feel comfortable with the procedure, contact NETGEAR support. The upgrade procedure requires the following files: XSM4396_M_006_0718.jbc XSM4396_S_006_0629.jbc Note: Your XSM4396S must have firmware version 12.0.4.8 or later. If your XSM4396S has an older firmware version, contact NETGEAR support. To upgrade the CPLD code: Copy the required files to a FAT32-formatted USB flash drive. Plug the USB flash drive into the USB ...
Knowledge Article
M4300 Firmware Version 12.0.6.7 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed on 12.0.6.7 since 12.0.6.6: SFP-BIDI module is not active in M4300-24x24F at 1G Speed with third party switch Tech-support file for M4300 is missing the critical 'show interface counters' output Multicast Packets is counted as Unicast Packets when t...
Knowledge Article
M4300 Firmware Version 12.0.6.6 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New features in 12.0.6.6: Supports new module APM402XL which has 40G QSFP ports for M4300-96X Supports UPnP and Bonjour to allow management station to discover the IP address of management VLAN or Service port. Adds ‘time-a.netgear.com’ and ‘time-c.netgear.com...
Knowledge Article
M4300 Firmware Version 12.0.7.17 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bug Fixes: After LAG logical interface is disabled, you can still enable individual port members without admin enabling the LAG interface first. Traffic loss when firmware upgrade/reboot on M4300 stack PTP Master clock election fails after adding new device to...
Knowledge Article
M4300 Firmware Version 12.0.7.10 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed since 12.0.7.9: mDNS protocol packets are not flooded in the VLAN when Apple Bonjour protocol is enabled Stack port packet counter was miscalculated which resulted in displaying excessive packet drops Add BitRate info to 'show interface counter' out...
Knowledge Article
M4300 Firmware Version 12.0.7.8 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed since 12.0.7.7: The port on M4300-96X still displays in 40Gbps speed after set port mode to 4x10G fan-out mode The Tech-Support file is missing critical IGMP info Invalid Port Media Type shows up at combo ports in WEB UI The link on M4300-96X 40G po...
Knowledge Article
M4300 Firmware Version 12.0.4.8 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) For Legacy M4300 M4300-28G(GSM4328S), M4300-52G(GSM4352S), M4300-28G-POE+(GSM4328PS), M4300-52G-POE+(GSM4352PS), M4300-8X8F(XSM4316S), M4300-12X12F(XSM4324S), M4300-24X24F(XSM4348S), M4300-24X(XSM4324CS), M4300-48X(XSM4348CS) New Features on 12.0.4: Since 12.0...
Knowledge Article
M4300 Firmware Version 12.0.8.15 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New Features and Enhancements: First image to support HDMI Card IO module TPM404H Supports new M4300 hardware models M4300-16X, M4300-24XF & M4300-48XF IGMP Snooping enhancement so that NETGEAR switches can be used as a plug-and-play for audio and video applic...
Knowledge Article
M4300 Firmware Version 12.0.7.9 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bugs fixed since 12.0.7.8: High bandwidth video multicast stream seeing display playback issue when deployed with switch in stacking mode Cut-thru mode is not present in data center mode. To enable cut-thru mode, enable the following SDM templates: data-center...
Knowledge Article
M4300 Firmware Version 12.0.7.12 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New Features and Enhancements: Reduce M4300-8X8F fan noise during system reboot cycle Condense outputs for two show stack commands to show only ports that are configured in the stacking port mode Change Ethernet MTU default to jumbo frame size 9216 Enhance ‘sh...
Knowledge Article
M4300 Firmware Version 12.0.8.8 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) New Features and Enhancements: First image to support new M4300 hardware models M4300-16X, M4300-24XF & M4300-48XF IGMP Snooping enhancement so that NETGEAR switches can be used as a plug-and-play for audio and video applications. Support PTP end to end Transp...
Knowledge Article
M4300 Firmware Version 12.0.4.9 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) For Legacy M4300 M4300-28G(GSM4328S), M4300-52G(GSM4352S), M4300-28G-POE+(GSM4328PS), M4300-52G-POE+(GSM4352PS), M4300-8X8F(XSM4316S), M4300-12X12F(XSM4324S), M4300-24X24F(XSM4348S), M4300-24X(XSM4324CS), M4300-48X(XSM4348CS) M4300-96X Bugs fixed since 12.0.4....
Knowledge Article
M4300 Firmware Version 12.0.7.7 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Enhancements in 12.0.7.7: Security enhancement to protect from Cross-Site Request Forgery (CSRF) attack. Provide protection of Cross-Site Scripting(XSS) attack through HTML Entity Encoding. Upgrade OpenSSL from 1.0.2e to 1.0.2o, and SSLv2 upgraded to SSLv3. SS...
Knowledge Article
M4300 Firmware Version 12.0.7.15 - NETGEAR Support
Applicable Models: M4300-28G(GSM4328S) M4300-52G(GSM4352S) M4300-28G-POE+(GSM4328PS) M4300-52G-POE+(GSM4352PS) M4300-8X8F(XSM4316S) M4300-12X12F(XSM4324S) M4300-24X24F(XSM4348S) M4300-24X(XSM4324CS) M4300-48X(XSM4348CS) M4300-96X(XSM4396S) Bug Fixes: Rx discard counter increase on M4300 stack ports m4300, Dante controller fails to discover Dante devices on the network via mDNS Bonjour/mDNS is NOT forwarding over LAG SSLv3 is insecure therefore SSLv3 support is removed Registered multicast traffi...
Knowledge Article
M4300 Firmware Version 12.0.9.3 - NETGEAR Support
Applicable Models: M4300-12X12F (XSM4324S) M4300-16X (XSM4316PA) M4300-16X (XSM4316PB) M4300-24X (XSM4324CS) M4300-24X24F (XSM4348S) M4300-24XF (XSM4324FS) M4300-28G (GSM4328S) M4300-28G-PoE+ (GSM4328PA) M4300-28G-PoE+ (GSM4328PB) M4300-48X (XSM4348CS) M4300-48XF (XSM4348FS) M4300-52G (GSM4352S) M4300-52G-PoE+ (GSM4352PA) M4300-52G-PoE+ (GSM4352PB) M4300-8X8F (XSM4316S) M4300-96X(XSM4396S) New Features and Enhancements: Compliant with California Privacy Law: Force user to change the default pass...
Knowledge Article
M4300 Firmware Version 12.0.13.7 - NETGEAR Support
Enhancements: Show system configured name in the GUI Bug Fixes: PTPv2 L2 multicast packets with destination address 01:1b:19:00:00:00 are not passing through the switch. SNMP walk returns the total available power incorrectly as zero. Support warm reset and factory default reset functionality for GSM43xx models using the reset button similar to other M4300 switches. VRRP/CARP is not working for IPv6. FAN interrupt messages are logged even when the FAN is working perfectly which is not necessary....
Knowledge Article
Do M4300-series switches support half-duplex mode? - NETGEAR Support
Half-duplex mode is obsolete and we recommend that you do not use it. Some legacy equipment might require half-duplex mode. When using half-duplex mode on your M4300-series switch, note the following: M4300-28G (GSM4328S) supports half-duplex mode on ports 1 to 16 only. M4300-28G-PoE+ (GSM4328PS) supports half-duplex mode on ports 1 to 16 only. M4300-52G (GSM4352S) supports half-duplex mode on ports 1 to 16 and ports 25 to 40 only. M4300-52G-PoE+ (GSM4352PS) supports half-duplex mode on ports 1 ...
Knowledge Article
M4300-96X - No port LED activity in specific combination slot configuration - NETGEAR Support
Overview In the current M4300-96X hardware design, we have identified an issue where port cards are connected to slots in combinations 3 and 9 or 6 and 12, the cards do not show port activity LEDs, they do however, pass traffic and show as connected in the interface. Engineering has found the root cause and has provided us with a work around. Engineering has stated it is not possible to add this fix to a firmware update for future release. We will need to handle these cases going forward through...
Knowledge Article
UKCA Declarations of Conformity - NETGEAR Support
Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...
Knowledge Article
UK PSTI Declaration of Conformity - NETGEAR Support
On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...
Showing 1-20 of 21
4 Items
Sort by
Discussion Post
Power requirements for APM408C-10000S | NETGEAR Communities
Is there a datasheet for a APM408C-10000S stating power and thermal requirements?Is there a datasheet for a XSM4396K0-10000S stating power and thermal...
Discussion Post
Letters of Volatility for the following items | NETGEAR Communities
Possible to get Letters of Volatility for:XSM4396K0-10000S, M4300-96X — Modular Managed SwitchAPM408C-10000S, Expansion Module...
Discussion Post
XSM4396K1-100NES | NETGEAR Communities
I have a switch XSM4396K1-100NES. In this I need to utilize 10G Copper. Please let me know with which module I can utilize the current SFP to...
Discussion Post
I need help on my l3 configuration. | NETGEAR Communities
Hi, We have recently acquired an XSM4396KO-M4300-96X L3 switch and have successfully configured six VLANs within the switch. However, we are currently...
Showing 1-4 of 4
1 Items
M4300-96X (XSM4396K0 and XSM4396K1) | M4300-96X - Modular Managed Switch | NETGEAR Support
M4300-96X (XSM4396K0 and XSM4396K1) - M4300-96X - Modular Managed Switch
Showing 1-1 of 1
2 Items
TKTEI's Network Success with NETGEAR's solutions
TKTEI improved network efficiency with NETGEAR solutions, reducing costs and downtime. Highly recommended for reliability and ease of use.
NARL Builds a High-Availability, High-Throughput Network Powered by NETGEAR - NETGEAR Blog
Discover how NARL built a high-availability, high-throughput research network using NETGEAR MLAG to enable nonstop, petabyte-scale scientific data processing.
Showing 1-2 of 2