Search results for: XS708E

XS708E Firmware Version 1.00.12 - NETGEAR Support

Bug Fixes: Fixed the problem that fan failure LED on the front panel may get turned on incorrectly after upgrading the firmware from v1.00.06 to v1.00.10. Limitations: Please note the chipset behavior for the port mirroring feature: packets from the egress direction (Tx) of the source port are always tagged. Packets from the ingress direction (Rx) of the source ports are not tagged. Installation Instructions Using the Download Link below, download and extract the new firmware to a convenient pla...

XS708E Firmware Version 1.00.06 - NETGEAR Support

New Features and Enhancement: Initial Release Limitations: Please note the chipset behavior for the port mirroring feature: packets from the egress direction (Tx) of the source port are always tagged. Packets from the ingress direction (Rx) of the source ports are not tagged Installation Instructions Download the new firmware to a convenient place on your local system and extract the ZIP file (e.g., C:\downloads\). Start ProSAFE Plus Configuration Utility, (included on the CD coming with your Sm...

XS708E Firmware Version 1.00.08 - NETGEAR Support

Bug Fixes: Fixed the problem that when the internal temperature of the switch reaches 75 C, fan speed does not shift to a higher RPM accordingly. Limitations: Please note the chipset behavior for the port mirroring feature: packets from the egress direction (Tx) of the source port are always tagged. Packets from the ingress direction (Rx) of the source ports are not tagged Installation Instructions Download the new firmware to a convenient place on your local system and extract the ZIP file (e.g...

XS708E Firmware Version 1.00.10 - NETGEAR Support

Bug Fixes: Fixed the problem that fan failure LED on the front panel may get turned on incorrectly. Limitations: Please note the chipset behavior for the port mirroring feature: packets from the egress direction (Tx) of the source port are always tagged. Packets from the ingress direction (Rx) of the source ports are not tagged. Installation Instructions Download the new firmware to a convenient place on your local system and extract the ZIP file (e.g., C:\downloads\). Start ProSAFE Plus Configu...

XS708Ev2 Firmware Version 1.6.0.30 - NETGEAR Support

New Features and Modifications: For enhanced security, the default “password” must be changed when you log in to the switch for the first time. Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only. Download Link: http://www.downloads.netgear.com/files/GDC/XS708Ev2/XS708Ev2_V1.6.0.30.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user man...

XS708Ev2 Firmware Version 1.6.0.17 - NETGEAR Support

New Features and Modifications: Revised some wordings on the web GUI for German language setting. WARNING: After XS708Ev2 is upgraded to FW version V1.6.0.15 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgarde Procedure: Download the new firmware 1.6.0.17 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to get t...

XS708Ev2 Firmware Version 1.6.0.15 - NETGEAR Support

New Features and Modifications: In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese (日本語). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). Implemented new access control WARNING: After XS708Ev2 is upgraded to FW version V1.6.0.15 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgarde Pr...

XS708Ev2 Firmware Version 1.00.4 - NETGEAR Support

New Features and Enhancements: Initial release. Installation Instructions Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is XS708Ev2_FW_v1.0.0.4.flash Download Link: http://www.downloads.netgear.com/files/GDC/XS708Ev2/XS708Ev2_FW_v1.0.0.4.zip Start ProSAFE Plus Configuration Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing. The ProSAFE P...

XS708Ev2 Firmware Version 1.6.0.23 - NETGEAR Support

New Features and Modifications: In the local browser interface, change page title from NETGEAR ProSAFE Plus Switch to NETGEAR XS708Ev2. In the help section of the local browser interface, links to Documentation and Support will now open up in the same language as selected for the local browser interface. Security Fixes: PSV-2018-0542 PSV-2018-0612 Bug Fixes: Access control list does not reject invalid combinations of IP and mask WARNING: After upgrading the XS708Ev2 to firmware version V2.6.0.21...

XS708Ev2 Firmware Version 1.0.0.15 - NETGEAR Support

New Features and Enhancements: Added a Switch Management Mode on the Web GUI to allow user to choose to manage the switch from Web browser only or from both Web browser and Plus Utility. Modifications: Fixed the vulnerabilities of cross-site Scripting (XSS) and cross-site request forgery (CSRF) attacks. Implemented more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). Fixed the issue where the fragmented packets cannot be forwarded. WARNING: After XS708Ev...

What NETGEAR modules can I use in the ProSAFE 8-Port 10-Gigabit Ethernet Web Managed Switch (Model XS708Ev2)? - NETGEAR Support

The following NETGEAR modules are supported: AGM731 AGM734 The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 AMX764 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 Last Updated:07/07/2025 | Article ID: 30525 Was this article helpful? Yes No

Which NETGEAR Smart Managed Plus Switches offer firmware in multiple languages? - NETGEAR Support

The following NETGEAR Smart Managed Plus Switches offer firmware in German and Japanese: GS108Ev3 GS108PEv3 GS116Ev2 GSS116E JGS516PE JGS524Ev2 JGS524PE XS708Ev2 XS716E For more information, see the following knowledge base articles: How can I change my user interface to Japanese or German for my NETGEAR Smart Managed Plus Switch that requires localized firmware? How can I change my user interface to Japanese or German for my NETGEAR Smart Managed Plus Switch that supports multi-language firmwar...

What are the port speeds for the NETGEAR ProSAFE 10-Gigabit Ethernet Smart Managed and Web Managed (Plus) Switches? - NETGEAR Support

Models XS708Ev2, XS716E, XS708T, and XS716T: The copper ports are compatible with 100M, 1G, and 10G speeds. The SFP+ fiber ports are compatible with 1G and 10G speeds. Models XS728T and XS748T: The copper and fiber ports are compatible with 1G and 10G speeds. The SFP+ fiber ports are compatible with 1G and 10G speeds. Last Updated:07/07/2025 | Article ID: 30378 Was this article helpful? Yes No

Security Advisory for Authentication Bypass on ProSAFE Web Managed Switches, PSV-2015-0043 - NETGEAR Support

NETGEAR is aware of a security issue that can allow an attacker to bypass authentication on some models of NETGEAR Web Managed Switches and gain access to a switch’s configuration file and password. This vulnerability only occurs when an attacker is on the same subnet as the switch. This vulnerability affects the following products: JGS516PE JGS524Ev2 JGS524PE GS105Ev2 GS105PE GS108Ev3 GS108PEv3 GS116Ev2 GSS108E GSS116E XS708Ev2 XS716E Firmware fixes are currently available for all affected prod...

How do I know if there is a loop detected on my XS716E? - NETGEAR Support

The XS716E Web Managed Switch supports loop detection, not prevention. When a loop is detected, both LEDs on the affected ports will blink at a constant speed of about 1 blink per second. Loop detection is disabled by default, but you can configure it using either the web browser-based GUI or the ProSAFE Plus Utility. For more information about configuring loop detection, see the ProSAFE 8-Port and 16-Port 10-Gigabit Web Managed Switch Models XS708Ev2 and XS716E User Manual. Last Updated:07/07/2...

Security Advisory for Insecure SOAP Access in ProSAFE Plus Configuration Utility, PSV-2017-1997 - NETGEAR Support

NETGEAR is aware of a security issue in the ProSAFE Plus Configuration Utility that allows an unauthenticated user to change settings on NETGEAR switches that the ProSAFE Plus Utility can configure. This insecure Simple Object Access Protocol (SOAP) access vulnerability can only be exploited from a computer on the local network and must be exploited while the utility is running. This vulnerability is present in the following utility versions: ProSAFE Plus Configuration Utility versions earlier t...

Security Advisory for Sensitive Information Disclosure on Some Switches, PSV-2018-0612 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a sensitive information disclosure security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware version...

Security Advisory for Missing Function Level Access Control on Some Switches, PSV-2018-0542 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a missing function level access control security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware ve...

Getting started with the XS728T 10-Gigabit Smart Managed Switch - NETGEAR Support

The XS728T is a 28-port 10-Gigabit Ethernet Smart Managed Switch. It supports 24 copper 10GBased-T ports and four dedicated 1G/10G fiber ports. Frequently Asked Questions 1. What are the major enhancements for the XS728T compared with the XS712T? More 10G copper ports and fiber ports One USB port for firmware upgrade and configuration backup IPv6 Static Routing New GUI style that supports the most popular WEB Browsers (see Question 11 below for a complete list) 2. What cables can be used with th...

XS708T / XS712Tv2 / XS716T Firmware Version 6.6.3.3 - NETGEAR Support

Bug Fixes: Combo port fails to linkup with Intel NIC X520 and X710 after multiple unplug/re-plug on XS712Tv2 New Features and Enhancements: Added GUI option to enable/disable Admin Mode of Netgear Smart Control Center (SCC) Utility Added LAG Hash options in LAG configuration GUI page string modification. ‘File Upload’ changes into ‘File Export’. Added Flow control options with ‘Asymmetic’ and ‘Symmtetic’. Known issues: Number of configured IPv6 routes is displayed incorrectly. [Workaround]: Plea...

XS708E and wake-on=lan WOL | NETGEAR Communities

I just got a ProSafe XS708E switch installed.I have a couple of workstations connected to the switch but I can't get wake-on-lan to wake up these two...

XS708E stuck at boot / fan speed max / orange PWR-LED blinking / no Uplink | NETGEAR Communities

Hi peeps!I need your help.Bought two second hand XS708E (v1, not v2!).One is good, the other one won't finish booting.- Power-LED ist blinking orange/amber.-...

Cannot access Netgear XS708E switch | NETGEAR Communities

In my router I can see that the switch gets an IP address, but I cannot access the webUI from its IP address.I tried resetting it (holding the Factory Reset...

Cannot access Netgear XS708E switch | NETGEAR Communities

In my router I can see that the switch gets an IP address, but I cannot access the webUI from its IP address.I tried resetting it (holding the Factory Reset...

Netgear XS708E-100NES ProSafe Combine Multiple Ports into One | NETGEAR Communities

Hi Community, Is there a way to combine 2 ethernet ports of the switch into a single virtual one for increased bandwidth? It would be more beneficial...

XS708Ev2 Statement of volatility | NETGEAR Communities

Hello, I am requesting a Statement of Volatility for the XS708ev2 switch.  

XS708E Plus Switch Problems connecting to Admin Page | NETGEAR Communities

Purchased a second hand XS708E downloaded ProSafe Plus Configuration Utility V2.7.8 the switch showed up let me assign a static IP address but that's all...

letter of volatility for the XS708Ev2 | NETGEAR Communities

I am looking for letter of volatility for the XS708Ev2. Is there a link to where I can find this? Thanks.

XS708Ev2 new firmware invalid | NETGEAR Communities

We have several several-year-old XS708Ev2 switches that have just been retired from one use and will soon be given another.  This seems like a good time...

how do i setup static lag on XS708e and intel x540-T2? | NETGEAR Communities

i can't seem to setup static lag on the xs708e. when i turn on admin mode, it locks me out of the switch and i have to reset it back to factory defaults in...

QoS Prioritisation using DSCP/DiffServ with Linux and XS708Ev2 | NETGEAR Communities

Hello,I'm trying reduce the mean-delay (round-trip-time) of my PTP packets when going over a switch and generated traffic by increasing the DSCP priority -...

XS708Ev2: unable to remove LAG ID 1 through Web interface | NETGEAR Communities

I configured LAG 1 for Port 1-2. LAG 2 for Port 3-4 and LAG 3 for Port 5-6. After restructuring the entire network, the LAGs are not needed anymore. I...

NetGear Prosafe XS708E End Of Life Information | NETGEAR Communities

Hi there ! We have some NetGear Prosafe XS708E switches at our colocations.  As part of an inventory and technology planning for our company, I...

Does the AXM763-10000S fiber module work with the XS708Ev2 switch | NETGEAR Communities

Does the AXM763-10000S fiber module work with the XS708Ev2 switch? In one accessory list it shows that it works with this switch, in another it shoes that it...

XS708E Slow Throughput? | NETGEAR Communities

Hi I have my windows PC connected using the X540-T2 NIC with a cat 6A cable and only getting about 400MB/s to my Netgear 524X... Not sure if I should be...

Windows Server LAG with Netgear XS708E | NETGEAR Communities

Hello,I have a question for NIC teaming under Windows Server 2016. I wanted to Team two 10 GbE lanes with a Netgear XS708E and my Server with a intel x540-t2...

XS708Ev2: packet drop over 1473 | NETGEAR Communities

Recntly I was bought XS708Ev2. If the size of the packet exceeds 1473, communication is not possible. Currently fimware is v1.0.0.4. I was...

Connection port for managing XS708e | NETGEAR Communities

Hi All, We have two XS708e installed in our collocation provider rack. They are used as SAN switches. When installing XS708e our engineer made mistake...

Buffer sizes on XS708E | NETGEAR Communities

I'm trying to find the cause of some lost datagrams on my network.  Linux has a socket buffer setting that can cause lost datagrams if it is not large...

XS708E Jumbo Frames / Firmware-Update issue | NETGEAR Communities

Hello! Please, i have a XS708E and i need to put both switchs (the other one is a Cisco SG500-28) to work together. Wich is the best way to perform this...

Networking solution ensures Hawk-Eye Innovations never misses the mark - NETGEAR Blog

Discover how NETGEAR networking powers Hawk-Eye’s real-time precision and reliability across global sporting events.