Search results for: XS512EM

XS512EM Firmware Version 1.0.0.8 - NETGEAR Support

This firmware update includes a chipset driver update. The total upgrade process will take about 8 to 10 minutes. The switch will reboot automatically after the upgrade process is completed. Bug Fixes: SFP+ ports cannot link up with Intel X552 10GbE SFP+ Ethernet controller Known Issues: After XS512EM is upgraded to firmware version V1.0.0.8, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgrade P...

XS512EM Firmware Version 1.0.2.0 - NETGEAR Support

Enhancements: Add a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Discovery and Management). Default is Disable. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/ Known Issues: After XS512EM is upgraded to firmware version V1.0.0.8 or later, it does not work with Plus Utility version prior to V2.7.2. Workaround: Download the l...

XS512EM Firmware Version 1.0.0.1 - NETGEAR Support

New Features and Enhancements: Initial release Known Issues and Limitations: Cable test does not work properly on multi-gig ports (port 9 and port 10) when no cable is connected or if the length is less than 5 meters. Download Link : http://www.downloads.netgear.com/files/GDC/XS512EM/XS512EM_V1.0.0.1.zip Last Updated:07/07/2025 | Article ID: 000053242 Was this article helpful? Yes No

XS512EM Firmware Version 1.0.0.6 - NETGEAR Support

Issues Solved: LACP cannot work with device running with Windows server 2016 operating system Possibility of unauthenticated web access through admin cookie leak Weak cryptography of the admin password that is stored in the admin cookie Device may reboot when under attack by certain malicious packets Known Issues and Limitations: Saved configuration file from firmware v1.0.0.5 and from newer firmware is not compatible with version v1.0.0.1 and vice versa. Upgrade Procedure: Below are the steps t...

XS512EM Firmware Version 1.0.1.3 - NETGEAR Support

Security Fixes: Various security fixes and enhancements. Known Issues: After XS512EM is upgraded to firmware version V1.0.0.8 or later, it does not work with Plus Utility version prior to V2.7.2. Workaround: Download the latest Plus Utility from http://www.netgear.com/support/product/PCU Download Link : https://www.downloads.netgear.com/files/GDC/XS512EM/XS512EM_V1.0.1.3.zip Firmware Update Instructions: Warning: If updating firmware from version 1.0.0.6 or earlier, then this upgrade will involv...

XS512EM Firmware Version 1.0.2.8 - NETGEAR Support

Bug Fixes: Fixes the issue where a switch becomes inaccessible. Known Issues: After you update the firmware to version 1.0.0.8 or a later version, the Plus Utility is not compatible with a firmware version earlier than version 2.7.2. http://www.netgear.com/support/product/PCU. Workaround: Install the latest version of the Plus Utility. To download the latest version, visit Download Link: https://www.downloads.netgear.com/files/GDC/XS512EM/XS512EM_V1.0.2.8.zip Firmware Update Instructions: Warnin...

XS512EM Firmware Version 1.0.1.1 - NETGEAR Support

Note: If updating from firmware version 1.0.0.6 or earlier, then this upgrade will involve a chipset driver update which will take between 8 and 10 minutes. Do not interrupt the upgrade process during this time. The switch will reboot automatically after the upgrade process is completed. After downloading FW v1.0.1.1 to the switch, regardless of the current password, switch’s password will reset to the default one. This helps address bug #2 in the Bug Fixes section. New Features and Modification...

XS512EM Firmware Version 1.0.0.5 - NETGEAR Support

New Features and Enhancements: Removed the restriction of maximum of 10G bandwidth for broadcast and multicast traffics. Improved fan speed control algorithm to lower the acoustic noise. Known Issues and Limitations: Connection may fail for combo ports after swapping between copper and fiber several times. Upgrade Procedure: Below are the steps to upgrade the firmware via HTTP, which is the most convenient method. For the other method, please check the IG and SW User Manual for details. Download...

XS512EM Firmware Version 1.0.2.7 - NETGEAR Support

Enhancements: LLDP packets are now dropped instead of being forwarded. Bug fixes: Fixes the issue where LACP doesn’t work when both SFP+ ports are configured as a trunk. Known Issues: After you update the firmware to version 1.0.0.8 or a later version, the Plus Utility does not work with a version earlier than version 2.7.2. Workaround: Install the latest version of the Plus Utility. Visit http://www.netgear.com/support/product/PCU to download the latest version. Download Link: https://www.downl...

XS512EM Firmware Version 1.0.2.5 - NETGEAR Support

Enhancements: A new CPU version is supported. A better load-sharing algorithm for port members in a link aggregation group (LAG) is supported. A new physical layer driver is supported to improve interoperability. IGMP snooping is now disabled by default. Known Issues: After you update the firmware to version 1.0.0.8 or a later version, the Plus Utility does not work with a version earlier than version 2.7.2. Workaround: Install the latest version of the Plus Utility. Visit http://www.netgear.com...

XS512EMv2 Firmware Version 1.0.0.8 - NETGEAR Support

New Features and Enhancements: This is the initial release of this firmware. Download Link: https://www.downloads.netgear.com/files/GDC/XS512EMv2/XS512EMv2_V1.0.0.8.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page. Last Updated:08/19/2025 | Article ID: 00006837...

XS512EMv2 Firmware Version 1.0.0.14 - NETGEAR Support

Enhancements: Increases the maximum number of mirroring source ports from 7 to 11. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Download Link: https://www.downloads.netgear.com/files/GDC/XS512EMv2/XS512EMv2_V1.0.0.14.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https:/...

How do I configure rate limits on my NETGEAR XS512EM or XS724EM switch? - NETGEAR Support

Port-based rate limiting allows you to limit the speed at which network traffic is sent or received by a device that is connected to a port on your switch. Unlike 802.1p Quality of Service (QoS), port-based rate limiting does not prioritize information based on type. Rate limiting simply means that the switch slows traffic on a port to keep it from exceeding the limit that you set. If you set the rate limit on a port too low, you might see degraded video stream quality, sluggish response times, ...

ProSAFE Plus Configuration Utility 2.7.2 - NETGEAR Support

New Features and Enhancements: Support configurable option to change port speed and QoS for XS512EM and XS724EM modes. Uses new and more secured encryption algorithm to communicate with switch. Download Link Note: If you do not see your switch in the network list on Plus Configuration Utility, click the REFRESH button or close and launch the ProSAFE Plus Utility again. You may also need to configure your computer’s security software to allow broadcast packets to pass through (to/from) your PC’s ...

Security Advisory for Authentication Bypass on Some Switches, PSV-2018-0219 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for an authentication bypass security vulnerability on the following product models: GS810EMX, running firmware versions prior to 1.0.0.5 XS512EM, running firmware versions prior to 1.0.0.6 XS724EM, running firmware versions prior to 1.0.0.6 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the ...

Security Advisory for Denial of Service on Some Switches, PSV-2018-0222 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a denial of service security vulnerability on the following product models: GS110EMX, running firmware versions prior to 1.0.0.9 GS810EMX, running firmware versions prior to 1.0.0.5 XS512EM, running firmware versions prior to 1.0.0.6 XS724EM, running firmware versions prior to 1.0.0.6 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR...

Security Advisory for Authentication Bypass on Some Smart Managed Plus Switches, PSV-2020-0305 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for an authentication bypass security vulnerability on the following product models: GS110EMX, running firmware versions prior to 1.0.1.7 GS810EMX, running firmware versions prior to 1.7.1.3 XS512EM, running firmware versions prior to 1.0.1.3 XS724EM, running firmware versions prior to 1.0.1.3 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NE...

Security Advisory for Sensitive Information Disclosure on Some Switches, PSV-2018-0612 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a sensitive information disclosure security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware version...

Security Advisory for Missing Function Level Access Control on Some Switches, PSV-2018-0542 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a missing function level access control security vulnerability on the following product models: FS728TLP, running firmware versions prior to 1.0.1.26 GS105Ev2, running firmware versions prior to 1.6.0.4 GS105PE, running firmware versions prior to 1.6.0.4 GS108Ev3, running firmware versions prior to 2.06.08 GS108PEv3, running firmware versions prior to 2.06.08 GS110EMX, running firmware versions prior to 1.0.1.4 GS116Ev2, running firmware ve...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

XS512EM firmware 1.2.0.5 and IGMP Snooping issues ? | NETGEAR Communities

Hello, I've been using a XS512EM switch for years (since 2019-07) as my core switch at home, running flawlessly. It has an Orange Livebox (5 then 6)...

XS512EM ports download speed | NETGEAR Communities

I just purchased a new XS512EM switch from Netgear's Amazon store. Updated firmware to 1.0.2.5, created two VLANs. VLAN1 has port1 for management connected...

Need US ECCN, HTS, CCATS, COO for xs512em | NETGEAR Communities

Hello, I am needing to track down the US ECCN, HTS, CCATS & Country of Origin for the XS512EM. On the US Customs Compliance | NETGEAR page...

XS716E vs. XS512EM | NETGEAR Communities

I am considering buying either a XS716E or a XS512EM switch for a small business - besides the obvious differences (like 16 vs.12 ports which is not...

LAG with SFP+ not working | NETGEAR Communities

I have 2 switches (XS512EM and XS724EM) each with 2 AXM761 SFP+ modules and would like to connect them via LAG. The LAG works with copper cables, it does not...