Search results for: UTM150

UTM150 Firmware Version 1.3.15-28 - NETGEAR Support

Note: This article dates from Sept 2012. UTM current Firmware in Jan 2014 are V3.5.2-14 Editor Jan 2014. Resolved issues (since v1.3.15-28): Added the ability for admin users to pull information from the UTM packet capture feature. Fixed UTM security vulnerability where the HTTPS scan service may allow a user to pull information from the UTM and execute custom code. Fixed the "operation failed" message being misreported on the Users->Configuration page. Fixed issue where the user would be unable...

UTM150 Firmware Version 3.0.1-124 Release Notes - NETGEAR Support

Note: This release is available through both online and offline firmware update mechanisms. Refer to the Installation Guide and User Manual for update methods and how to retrieve the package. New Features since the last release (v1.3.15-44) : Added Advanced Application Control/Firewall engine. Note: You will need to register the application license after upgrade so the service can be enabled. More info here Added Multiple SSID support (UTM9S). Added more flexible firewall rules, to allow the use...

UTM150 Firmware Version 1.3.15-21 - NETGEAR Support

Resolved issues (since v1.3.15-14): Corrected copyright year display. Fixed SSL VPN connection failures in Window 7 Ultimate 64-bit. Fixed issue where multiple consecutive installs and uninstalls of the SSL VPN client will cause the CPU to run at 100%. The UTM can now accept x.x.x.255 as the input in the WAN IP address field. Corrected the locations where the dbglog and utm_log are saved. Corrected a spelling error in the system log. Fixed an issue where the SSL-VPN tunnel is not getting establi...

UTM150 Firmware Version 1.3.15-44 - NETGEAR Support

Note: This release is available through both online and offline firmware update mechanisms. Refer to the Installation Guide and User Manual for update methods and how to retrieve the package. IMPORTANT: Due to the nature of the SSL improvements in this release, users already using or planning on using the HTTPS scan functionality of the UTM should take the following into consideration: For environments where the HTTPS scanning function is enabled with the default UTM certificate already installe...

UTM150 Firmware Version 1.3.15-42 - NETGEAR Support

Note: This article dates from August 2012. UTM current Firmware in Jan 2014 is V3.5.2-14 Editor Jan 2014. Resolved issues (since v1.3.15-28): Fixed issue where the IMAP scanning service was causing Mozilla Thunderbird to hang when used with Gmail. Fixed GUI compatibility issues where Block/Accept Exceptions for URL Filtering and Web Category did not show values when using Firefox. Fixed an issue where the GUI and SSL VPN portal sometimes became unreachable. Fixed issue where users behind the UTM...

UTM5/UTM10/UTM25/UTM50/UTM150 Firmware Version 3.5.2-14 - NETGEAR Support

New Features: Added the ability for the UTM to scan and filter encrypted emails in the following protocols: SMTPS, IMAPS, POP3S. Memory utilization improvement. Integrate cloud based anti-virus solution to replace existing anti-virus engine. Adds benefits of using less system resources and increases virus signature library from 6 million to 45 million. Note: When upgrading from a version older than V3.5.0-60, by either on-line or off-line upgrade, the user will need to upgrade to V3.5.0-60 first...

UTM5/UTM10/UTM25/UTM50/UTM150/UTM9S/UTM25S Firmware Version 3.5.0-60 - NETGEAR Support

New Features: Added Safe search enforcement for Google, Yahoo, and Bing search engines. Report section has been reworked and now allows for more granular filtering as well as custom report email profiles. Added report templates to display User session time and User session number. IP groups and VLANs can now be used in Exceptions rules for application security. The number of Anti-virus signatures is now displayed on the GUI on the Monitoring -> System Status page. Added New firmware alerts to th...

UTM5/UTM10/UTM25/UTM50/UTM150/UTM9S/UTM25S Firmware Version 3.6.1-38 - NETGEAR Support

Bug Fixes: Fixed SSL VPN vulnerable to shellshock Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. Download Links: UTM 5 / 10 / 25: http://www.downloads.netgear.com/files/GDC/UTM10/UTM5_10_25-Firmware-V3.6.1-38.zip UTM 50: http://www.downloads.netgear.com/files/GDC/UTM50/UTM50-Firmware-V3.6.1-38.zip UTM 150: http://www.downloads.netgear.com/files/GDC/UTM150/UTM150-Firmware-V3.6.1-38.zip UTM 9S/25S: http://www.downloads.netgear.com/f...

UTM5/UTM10/UTM25/UTM50/UTM150 Firmware Version 3.6.2-8 - NETGEAR Support

Bug Fixes: Fixed HTTPS scanning issue: when visiting HTTPS website the following error occurs: “The SSL connection cannot be established - REASON: the security certificate was issued by a company you have not chosen to trust”. Fixed the issue of getting invalid certificate | ERR_CERT_INVALID | OS X). Fixed the AD settings lost after re-login. Fixed the issue where the download ISO is not possible when HTTP scanning is enabled. Fixed the issue where the IPSec tunnel is formed, but traffic cannot ...

UTM5/UTM10/UTM25/UTM50/UTM150 Firmware Version 3.5.0-56 - NETGEAR Support

Note: This release is available through both online and offline firmware update mechanisms. Refer to the Installation Guide and User Manual for update methods and how to retrieve the package. New Features since the last release: Added the ability for the UTM to scan and filter encrypted emails in the following protocols: SMTPS, IMAPS, POP3S. Added Safe search enforcement for Google, Yahoo, and Bing search engines. Report section has been reworked and now allows for more granular filtering as wel...

UTM5/UTM10/UTM25/UTM50/UTM150/UTM9S/UTM25S Firmware Version 3.6.2-4 - NETGEAR Support

Bug Fixes: Fixed the issue with POP3s and SMTPS: cannot send/receive mails. Fixed the issue that if SMTP filter is active, the UTM150 stops microsoft mails such as hotmail.es, hotmail.com, outlook.es, outlook.com. Emails come through only if SMTP filter is disabled. Fixed the GUI issue: Application Security > SSL Settings > SSL Settings, when "Allow the device to handle SSL connections using SSLv2" or "Allow the device to handle SSL connections using SSLv3" are checked and the settings applied, ...

UTM5/UTM10/UTM25/UTM50/UTM150/UTM9S/UTM25S Firmware Version 3.6.1-29 - NETGEAR Support

Bug Fixes: Fixed Vulnerability to OpenSSL (CVE-2014-0224) Fixed VDSL module does not activate on boot Fixed the bug where iPhone5 or iPad tries to connect to a UTM9S with DSL module in slot1, the VPN does not show it is connected, traffic and connection is very inconsistent and drops a lot Fixed the issue when a reboot of UTM9S, DSL will not connect unless goes into the DSL module WAN settings and presses Apply Fixed secondary WAN IP loopback issue where internal user cannot access internal serv...

UTM5/UTM10/UTM25/UTM50/UTM150/UTM9S/UTM25S Firmware Version 3.6.2-1 - NETGEAR Support

Bug Fixes: ,Extended SSL VPN ActiveX certificate expiring. ,Fixed e-mails that were being sent by UTM were being marked as spam and the mail sender name "FROM" was being eradicated. ,Fixed the email does not work: when IMAP and IMAPS scanning is enabled, send email by Google mail from LAN host and receive email by Google mail does not always working. ,Fixed UTM does not work with ReadyNAS v 6.1.8. ,Fixed can't receive hotmail email when SMTP scanning enabled. ,Fixed the issue that IMAPS will sto...

UTM5/UTM10/UTM25/UTM50/UTM150/UTM9S Firmware Version 3.1.1-31 - NETGEAR Support

New Features: None Issue(s) resolved since last Release V3.1.0-149: LAN multi-homing IP is lost after changing and applying Wi-Fi settings. Users are now able to add a VLAN profile with an empty profile name. Fixed the issue where an FTP client cannot upload a 260MB file to FTP server successfully. 3G/4G settings page does not display the dongle information. After changing the application control profile, the bandwidth limiting function does not work. Connection rate is impacted when user authen...

UTM5/UTM10/UTM25/UTM50/UTM150/UTM9S/UTM25S Firmware Version 3.6.1-43 - NETGEAR Support

Bug Fixes: Fixed OpenSSL / SSL 3.0 POODLE vulnerability (CVE-2014-3566) Fixed IMAP issue that sometimes caused the scanning of google mail to not work Fixed the bug where messages sent from the UTM to end user are being marked as SPAM Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. Download Links: UTM 5 / 10 / 25: http://www.downloads.netgear.com/files/GDC/UTM10/UTM5_10_25-Firmware-V3.6.1-43.zip UTM 50: http://www.downloads.netgear...

UTM5/UTM10/UTM25/UTM50/UTM150 Firmware Version 3.6.1-20 - NETGEAR Support

New Features: Extend logging time on ReadyNAS (The UTM can now store up to 2 years of logs on ReadyNAS). New ReadyNAS addon for ReadyNAS OS 6.x (x86 platform) Add the capability to download and read UTM release notes directly from the UTM GUI Removed the extra step previously required to register the IPS & application control license Removed the license backdating in the event that a license renewed after it had already expired. Added the ability to reset the admin password and also the ability ...

NETGEAR Routers and UTMs that support VPN - NETGEAR Support

All NETGEAR ProSAFE Routers and ProSECURE UTMs support VPN. Details as shown. Model number Number of IPsec Tunnels Number of SSL Connections SRX5308 125 50 FVS336Gv3 25 10 FVS318G 5 none FVS318N 12 5 UTM150 150 75 UTM50 50 25 UTM25S 25 14 UTM25 25 14 UTM10 10 5 UTM9S 10 5 UTM5 5 2 Last Updated:07/07/2025 | Article ID: 24267 Was this article helpful? Yes No

VPN Lite v5.14.003 - NETGEAR Support

NETGEAR IPSec VPN Lite v5.14.003 Release Notes Note: This VPN Lite Client software requires an activation key. The VPN Lite Client software is NOT available for purchase and is ONLY bundled with the following products: FVS338 - 1 Lite license FVS336Gv2 - 1 Lite license FVX538v2 - 5 Lite licenses SRX5308 - 1 Lite license SRXN3205 - 1 Lite license UTM10 - 1 Lite license UTM25 - 1 Lite license UTM50 - 3 Lite License UTM150 - 3 Lite License Please contact the resellers or place of purchase if you ne...

VPN Lite Software Version 5.50.007 - NETGEAR Support

Netgear IPSec VPN Lite v5.50.007 Release Notes Note: This VPN Lite Client software requires an activation key. The VPN Lite Client software is NOT available for purchase and is ONLY bundled with the following products: FVS338 - 1 Lite license FVS336Gv2 - 1 Lite license FVX538v2 - 5 Lite licenses SRX5308 - 1 Lite license SRXN3205 - 1 Lite license UTM10 - 1 Lite license UTM25 - 1 Lite license UTM50 - 3 Lite License UTM150 - 3 Lite License Please contact the resellers or place of purchase if you ne...

ProSECURE UTM License part numbers - NETGEAR Support

NETGEAR is only allowing customers to register and activate Email or Web Subscription licenses with terms expiring on or before December 31, 2016. Subscription licenses with expiration dates beyond December 31, 2016 will be adjusted to have an end date of December 31, 2016. For detail information, please refer to ProSECURE License FAQ. This article explains ProSECURE UTM license part numbers. There are seven UTM (Unified Threat Management) devices in the NETGEAR ProSECURE line: UTM5, UTM10, UTM2...

Connected, no internet | NETGEAR Communities

Hi All i Have a utm50 and i am trying to set it up to run two internet sources. I used ports wan1 and wan 2 to try and connect to the internet. When i plug...

Cant remember password. TM1502A | NETGEAR Communities