Search results for: GSM7228PL
We couldn’t find anything for "GSM7228PL".
Sort by
Showing 0-0 of 0
186 Items
Sort by
Knowledge Article
GSM7328Sv2,GSM7352Sv2,GSM7228PSv1,GSM7252PSv1 Firmware version 10.0.0.43 - NETGEAR Support
Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Bug Fixes from Release 10.0.0.31: GSM73xxSv2h1 doesn't show the RPS status correctly using RPS5412 Even if the user "logs out" using the "LOGOUT" button, the file can be downloaded Unable to apply the configure file to the switch after copy it from USB sticker GSM7352Sv2 - Stacking issues on 2 stacks. Getting ACK errors and failure to receive response GSM7328Sv2h2 - Can get only some trafic tru after the defaut route's ho...
Knowledge Article
GSM7328Sv2,GSM7352Sv2,GSM7228PSv1,GSM7252PSv1 Firmware version 10.0.0.53 - NETGEAR Support
Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Bug Fixes from Release 10.0.0.44: Unable to enable routing on VLAN 1 from GUI SNTP synchronized time is truncated, when show sysinfo by CLI Stop offering IP address when there are many DHCP IP conflicts in DHCP pool Switch crashed when issue 'Show vlan private-vlan' All of ports became 'detach' after remove one rule in ACL M5300-28/52G-POE+ cannot provide power to PD with RPS5412 Switch keep printing Power Supply Alarm& A...
Knowledge Article
GSM7328S/GSM7352S/GSM7228PS/GSM7252PS/GSM7328FS firmware version v8.0.3.34 - NETGEAR Support
Applicable Models: GSM7328S, GSM7352S, GSM7328FS, GSM7228PS, GSM7252PS, GSM7328S-200, GSM7352S-200 Release 8.0.3.34 Firmware New Features from Release 8.0.3.25 The Product Registration feature is supported. It will guide user to register NETGEAR switch when user login the switch through GUI first time. Bug Fixes from Release 8.0.3.25 Policy stats are not showing any packets processed by policy. Need to add warning to upgrade message during flash update. Fans and temperature status on GUI is not ...
Knowledge Article
GSM7328S/GSM7352S/GSM7228PS/GSM7252PS Firmware version v10.0.0.25 - NETGEAR Support
Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Release 10.0.0.25 Firmware New Features from Release 10.0.0.25 Support mixed-stacking with M5300-28G(GSM7228Sv1h1),M5300-28G3(GSM7328Sv2h2),M5300-28GF3(GSM7328FSv2h1),M5300-28G-POE+(GSM7228PSv1h2),M5300-52G(GSM7228Sv1h1),M5300-52G3(GSM7252Sv2h2),M5300-52G-POE+(GSM7252PSv1h2). Support AX745(10GBASE-T RJ-45 Port Adapter). Note: The 10.0.0 doesn't support GSM7328FS v1h1,GSM7328Sv1 or GSM7352Sv1, so don't try to download. Upg...
Knowledge Article
GSM7328Sv2,GSM7352Sv2,GSM7228PSv1,GSM7252PSv1 Firmware version 10.0.0.44 - NETGEAR Support
Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Bug Fixes from Release 10.0.0.43: Feature request to have java (tcp 4242) in the management ACL list Unable to ping the VRRP virtual IP address from a routed interface Unable to apply the configure file to the switch after copy it from USB sticker When running cable test, some empty ports showed 'cable status test failed' POE cameras keep rebooting in an endless loop Console hung after session timeout DHCP server did not ...
Knowledge Article
GSM7328S/GSM7352S/GSM7228PS/GSM7252PS Firmware version v10.0.0.31 - NETGEAR Support
Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Release 10.0.0.31 Firmware Bug Fixes from Release 10.0.0.25 Fixed some configuration migration issues. Added "Packets forwarded by cpu and IP Packets received" in "show interface ethernet switchport" output. NMAP command hangs entire core stack. Note: The 10.0.0 doesn't support GSM7328FS v1h1,GSM7328Sv1 or GSM7352Sv1, so don't try to download. Upgrade procedure Save the current configuration data. Normally the firmware wi...
Knowledge Article
M5300 Firmware Version 10.0.0.44 - NETGEAR Support
Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.31: Feature request to have java (TCP 4242) in the management ACL list Unable to ping the VRRP virtual IP address from a routed interface Unable to apply the configure file to the switch after copying it from USB stick When running cable test, some empty p...
Knowledge Article
M5300 Firmware Version 10.0.0.43 - NETGEAR Support
Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.31: GSM73xxSv2h1 doesn't show the RPS status correctly using RPS5412 Even if the user "logs out" using the "LOGOUT" button, the file can be downloaded Unable to apply the configure file to the switch after copy it from USB sticker GSM7352Sv2 - Stacking iss...
Knowledge Article
M5300 Firmware Version 10.0.0.53 - NETGEAR Support
Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.44: ,Unable to enable routing on VLAN 1 from GUI ,SNTP synchronized time is truncated, when show sysinfo by CLI ,Stop offering IP address when there are many DHCP IP conflicts in DHCP pool ,Switch crashed when issue 'Show vlan private-vlan' ,All of ports b...
Knowledge Article
M5300 Firmware Version 10.0.0.31 - NETGEAR Support
Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.25: Fixed some configuration migration issues. Added "Packets forwarded by cpu and IP Packets received" in "show interface ethernet switchport" output. NMAP command hangs entire core stack. Upgrade procedure Save the current configuration data. Normally th...
Knowledge Article
M5300 Firmware Version 10.0.0.25 - NETGEAR Support
Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) New Features: Support mixed-stacking with GSM7328Sv2h1,GSM7352Sv2h1,GSM7228PSv1h1,GSM7252PSv1h1. Support AX745(10GBASE-T RJ-45 Port Adapter). Bug Fixes: STP: The lag port cost is 0 after add ports to it. Failed to download image through IPv6 HTTPs . Failed to download configurat...
Knowledge Article
M5300 Firmware Version 11.0.0.23 - NETGEAR Support
M5300 Firmware Version 11.0.0.23 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.18 Changing VLAN Tag in Port PVID Config does not change presentation in VLAN membership. The command "show fiber-ports optics-info" will not display the transceiver type when plugged into the first 20 ports o...
Knowledge Article
M5300 Firmware Version 11.0.0.12 - NETGEAR Support
M5300 Firmware Version 11.0.0.12 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.11 Fixed the issue where 10G SFP+ port is unable to link up after switch reload with customer's config Changes and Restrictions While 10.0.0.x supports both M5300 and older GSM73xxSv1h2 such that the two serie...
Knowledge Article
M5300 Firmware Version 11.0.0.28 - NETGEAR Support
M5300 Firmware Version 11.0.0.23 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.23 mDNS packets will be dropped when IGMP/MLD snooping is enabled. A lot of entries are missing in the Neighbor Table on IPv6 GUI. Switch sends radius accounting requests with default interface IP instead of u...
Knowledge Article
M5300 Firmware Version 11.0.0.14 - NETGEAR Support
M5300 Firmware Version 11.0.0.14 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.12 Fixed the issue where the fiber port link goes down after the issue ‘cablestatus <unit/slot/port’’ to test cable. Fixed the issue where the [10G compatibility] Fiber port link goes down after switch reloads...
Knowledge Article
M5300 Firmware Version 11.0.0.11 - NETGEAR Support
M5300 Firmware Version 11.0.0.11 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.11 Fixed the issue where 'show network' doesn’t show the IP address for the management VLAN. Since 11.0.0.11, ‘show network’ shows the IP address for management VLAN. But if user specifies an IP address on pre...
Knowledge Article
M5300 Firmware Version 11.0.0.10 - NETGEAR Support
M5300 Firmware Version 11.0.0.10 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1), M5300-52G(GSM7252Sv1h1), M5300-28G3(GSM7328Sv2h2), M5300-52G3(GSM7352Sv2h2), M5300-28G-PoE+(GSM7228PSv1h2), M5300-52G-PoE+(GSM7252PSv1h2), M5300-28GF3(GSM7328FSv2h1) Bug Fixes and Enhancements since 10.0.0.53 Support for Industry Standard VLAN trunking port mode Support for RSPAN (Remote Mirroring) Support for PVST/PVST+ CPU Management IP Changes: Deprecate "network" interface. The old "ne...
Knowledge Article
M5300 Firmware Version 11.0.0.31 - NETGEAR Support
M5300 Firmware Version 11.0.0.31 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.31 GARP vlan status is not stable. Multicast packet from UBNT wifi AP caused GS716T to enter packet storm. Switch crashed in a specific 802.1x setup. Fixed 'devshell access' security issue on GUI. Download Usi...
Knowledge Article
M5300 Firmware Version 11.0.0.18 - NETGEAR Support
M5300 Firmware Version 11.0.0.18 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.14 Issue error reply when user attempt to configure sFlow on LAG due to hardware limitation. Stack port information is something wrong on M5300. Web accepting special characters but CLI is not accepting for po...
Knowledge Article
What switches can be stacked with my M5300 managed switch? - NETGEAR Support
Stacking switches (connecting them together so that they function and are managed as one large switch) requires that all switches in the stack have compatible hardware and firmware. Stacking compatibility with the M5300 switch range The following switches are compatible, and can be stacked together : Model Hardware version Formerly Known As : GSM7328Sv2 GSM7328Sv2h1 GSM7352Sv2 GSM7352Sv2h1 GSM7228PS GSM7228PSv1 GSM7252PS GSM7252PSv1 M5300-28G GSM7228Sv1h1 GSM7228S M5300-52G GSM7252Sv1h1 GSM7252S...
Showing 1-20 of 186
31 Items
Sort by
Discussion Post
Can't Unstack GSM7252PS / GSM7228PS | NETGEAR Communities
I'm having several issues, but they may all be related to stacking...I successfully stacked two GSM7252PS and one GSM7228PS using the front SFP ports and...
Discussion Post
GSM7228PS Ports to use 2 VLANs? | NETGEAR Communities
Hi there,I'm trying to set up my GSM7228PS switch VLANs but not getting any success.My internal network is 10.0.0.x/24, with the internal default gateway...
Discussion Post
GSM7228PS coldstarts | NETGEAR Communities
There are a couple of new GSM7228PS switches in a customers location. All switches are behind new USVs and within professional cooled service-rooms. Some of...
Discussion Post
GSM7228PS Software License Installation | NETGEAR Communities
Hello, I am using GSM7228PS & UTM-50 and having problem to activate software license for GSM7228PS.I tried to activate as instraction said that register...
Discussion Post
GSM7228PS and Cisco phones | NETGEAR Communities
We are trying to add Netgear GSM7228PS switches to our existing Cisco based network. Having trouble with Cisco 7900 series phones losing registration with...
Discussion Post
Adding DHCP Option 156 to a GSM7228PS? | NETGEAR Communities
Can anyone guide me to how to add DHCP Option 156 to a GSM7228PS? In the Web interface I see DHCP Pool Options, but when I choose Option Code 156 and Option...
Discussion Post
GSM7228PS stuck in bootup phase | NETGEAR Communities
Hi,I seek some guidance for the following issue;GSM7228PS seems to be stuck in the bootup phase according to the power-led (constant amber)I get no response...
Discussion Post
GSM7228PS frozen upon boot up after firmware web update | NETGEAR Communities
Hi, I recently updated my switch to the latest Netgear Firmware 10.0.0.53 via the web interface and all good. Now a few days later the unit is...
Discussion Post
GSM7228PS Switch cutting out for 20 minutes every 90 minutes | NETGEAR Communities
GSM7228PS, Firmware 8.0.3.25 has started acting strange.Every 90 minutes, the switch goes down for about 20 minutes, and no one can get on the network or...
Discussion Post
GSM7228PS Firmware 10.0.0.53 | NETGEAR Communities
Hello,Where can I find Web management and CLI Reference manual for 10.0.0.53 software?Thx, regards
Discussion Post
GSM7228PS LAG Issues | NETGEAR Communities
Model: GSM7228PS V2Firmware: 8.0.3.23OS: Windows Hello all, I had a question about a LAG issue I'm having. I have the GSM7228PS with 2 LAGS...
Discussion Post
Creating a stack with 2x GSM7228PS and 1x XS708T | NETGEAR Communities
Hello, We plan to deploy 2 x GSM7228PS, plus 1x XS708T, stacked trough SPF+ connectors. We need 4x 10Gbase-T ports for connecting to our storage...
Discussion Post
XSM7224S Issue range of IPs to certain ports | NETGEAR Communities
Hi,I have an XSM7224S (awesome bit of kit by the way!) that is my core switch. Into which will be 7 other switches over fibre (mostly GSM7228PS) and some...
Discussion Post
How to set M5300-28G(GSM7228S) to Factory Default State | NETGEAR Communities
I know there is a way to do this using the browser.But, is there a way to set M5300-28G(GSM7228S) switch to the factory default state not using the browser...
Discussion Post
Setting DHCP Option(s) Problems on GSM7224P | NETGEAR Communities
I have several GSM7224P switches running firmware 10.0.1.21I need to have the switches hand out IP and various options for my phone system to work.I am...
Discussion Post
M4100-24G-POE+ (GSM7224P) Certificate of Volatility | NETGEAR Communities
Hello, Could you please provide a Certificate of Volatility for the M4100-24G-POE+ (GSM7224P).Thank you in advance,Username082385
Discussion Post
Having issues connecting to management interface over network with m4100 (GSM7248p) | NETGEAR Communities
I have been having an issue connecting to the switch management web GUI over a network. We have the following: company lan (10.0.20.0/23) : vlan 10guest...
Discussion Post
M4100-26G-POE (GSM7226LP) failed after Update | NETGEAR Communities
Hello community, I have a problem with my switch, M4100-26G-POE (GSM7226LP) | ProSafe 26 ports gigabits fully managed L2 switch with PoE.I wanted to...
Discussion Post
Gsm7224p not web interface | NETGEAR Communities
I removed the “U” and “T” label on the Vlan of my ports. My web interface now does not work. What to do? My switch GSM7224p
Discussion Post
M4100-50G-POE+(GSM7248P) auto reboot | NETGEAR Communities
Is it possible to auto reboot this switch every night? I need to reboot it every 1-2 weeks to keep working.
Showing 1-20 of 31
5 Items
M5300-28G-POE+ (GSM7228PSv1h2) | 12-Port Managed Gigabit Switch | NETGEAR Support
M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch
APS1200W | Power Supply Unit 1200W AC | NETGEAR Support
APS1200W - Power Supply Unit 1200W AC
M5300-28G (GSM7228S) | ProSAFE 24-port Gigabit L2+ Managed Stackable Switch | NETGEAR Support
M5300-28G (GSM7228S) - ProSAFE 24-port Gigabit L2+ Managed Stackable Switch
M4100-26G-POE (GSM7226LPv1h1) | 22-port GE + 4 GE Combo L2 Managed PoE Switch | NETGEAR Support
M4100-26G-POE (GSM7226LPv1h1) - 22-port GE + 4 GE Combo L2 Managed PoE Switch
M4100-50G-POE+ (GSM7248Pv1h1) | 46-port GE + 4 GE Combo L2 Managed PoE+ Switch | NETGEAR Support
M4100-50G-POE+ (GSM7248Pv1h1) - 46-port GE + 4 GE Combo L2 Managed PoE+ Switch
Showing 1-5 of 5
We couldn’t find anything for "GSM7228PL".
Showing 0-0 of 0