Search results for: GS752TX

GS752TXS Firmware Version 5.2.0.26 - NETGEAR Support

GS752TXS is NETGEAR's new generation of Gigabit Stackable Smart Switch with new or enhanced features. GS752TXS supports 48 10/100/1000 Mbps RJ45 ports and 4 10Gbps SFP+ ports within which two ports (port 51 and 52) can be used as stacking ports or as uplink ports. GS752TXS supports the latest Smart Control Center, please use SCC version 1.1.2.1 or above for switch discovery, basic configuration and FW upgrades. In this release, feature of production release was added and below customer issues we...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.2.15 - NETGEAR Support

Bug Fixes: Fixes the issue where the management VLAN ID may be overwritten with the default value on a trunk port when you manage the switch through Insight. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Warnings: Rea...

GS728TXS / GS752TXS Firmware Version 6.1.0.39 - NETGEAR Support

Bug Fixes: For compliance with California state law, the default “password” must be changed after logging into the switch. To configure SNMPv3, Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. If you upgrade firmware to V6.1.0.39 from an older version, clear your temporary internet files or browser cache to see the new settings. Added a new option under Security > Management Security > SCC Control to disable or enable S...

GS728TXS / GS752TXS Firmware Version 6.1.0.36 - NETGEAR Support

Bug Fixes: Multicast packet with destination MAC address of 01:80:c2:00:00:1c and Ethernet type of 0x88CC causes loop in properly converged STP topology. Debugging URL of ‘devshell’ is accessible without authentication. Known Issues: Master unit is unexpectedly changed after reboot the whole stack many times. Workaround:Assign the master unit with a higher priority. Interface Shaping Rate doesn’t work on GS7xxTXS when shape is configured with min value 16. Workaround:The min effective value is 5...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.2.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.1.32 - NETGEAR Support

Enhancements: You can now use the new NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight app to discover the switch in the same subnet. The NDT supports UPnP, which is now the preferred method of discovery. Known issue: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and come...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.2.14 - NETGEAR Support

New Features and Enhancements: Support for the UI Dark Theme option. Replacement of all TFTP methods with HTTP to improve reliability. Bug Fixes: Fixes the issue where the GS752TXPv3 switch might not forward packets between ports 1 – 24, 49, 50, and ports 25 – 48, 51 and 52. Fixes the issue where the IP phone that has LLDP enabled cannot join the voice VLAN. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the I...

GS728TXS/GS752TXS Firmware Version 6.1.0.12 - NETGEAR Support

GS728TXS and GS752TXS are NETGEAR's new generation of Gigabit Stackable Smart Switch with new or enhanced features such as 10G uplink, Static Routing, Green Ethernet, IPv6 Service, Dot1x VLAN Assignment, DHCP Snooping and DoS (Denial of Service) protection. Note that GS728TXS is new product, and GS752TXS was released with firmware 5.2.0.x in July 2011. New SW release 6.1.0.x will support both GS728TXS and GS752TXS. GS728TXS and GS752TXS support the latest Smart Control Center, please use SCC ver...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.2.17 - NETGEAR Support

Bug Fixes: Fixes the issue where connecting a PC to an IP phone’s LAN port causes the switch to remove the voice VLAN, resulting in a 30 second loss of call audio. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Warning...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.1.30 - NETGEAR Support

Features and Enhancements: Addition of bidirectional synchronization of the configuration settings between Insight and local GUI management Addition of online checks for new firmware updates Insight management mode is now enabled by default Update to the dashboard page in the switch GUI. Known issue: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display After the IP address of a device changes, it can take 10 to 15 minutes to update an I...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.1.42 - NETGEAR Support

Enhancements: This firmware version is an initial release to support the new GS728TXv3, GS728TXUPv3, GS752TXv3 and GS752TXUPv3 models. Known issue: When you perform a cable test for all ports on the switch through Insight, some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Warnings: Read and follow these warnings before u...

GS728TXS / GS752TXS Firmware Version 6.1.0.27 - NETGEAR Support

GS728TXS and GS752TXS are NETGEAR’s new generation of Gigabit Stackable Smart Switch with new or enhanced features such as 10G uplink, Static Routing, Green Ethernet, IPv6 Service, Dot1x VLAN Assignment, DHCP Snooping and DoS (Denial of Service) protection. This maintenance release 6.1.0.27 is to fix some critical customer issues. And in this release some more debug info was also added to help debug in customer filed. Note: Maintenance release 6.1.0.x supports both GS728TXS and GS752TXS. Previou...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.1.22 - NETGEAR Support

New Features and Enhancements: This is the initial release of this firmware. Known Issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.netgear.com/files/GDC/GS728TXPv3/GS728TXPv3_GS752TXPv3-V6.2....

GS728TXS / GS752TXS Firmware Version 6.1.0.35 - NETGEAR Support

Bug Fixes: A security issue of “CVE-2013-4775” (published on CVE web site https://cve.mitre.org/) that can allow remote attackers to read startup configuration file. Device view does not work after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer. Instead of showing the actual system IP, SNMP TRAP always display “192.168.0.239” for its agent IP. Stack system can't be accessed when stack master switchovers soon after deleting an empty unit. After an IGMP Snooping VL...

GS728TXv3 / GS728TXUPv3 / GS752TXv3 / GS752TXUPv3 Firmware Version 6.2.2.15 - NETGEAR Support

Bug Fixes: Fixes the issue where the management VLAN ID may be overwritten with the default value on a trunk port when you manage the switch through Insight. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Warnings: Rea...

GS728TXv3 / GS728TXUPv3 / GS752TXv3 / GS752TXUPv3 Firmware Version 6.2.2.17 - NETGEAR Support

Bug Fixes: Fixes the issue where connecting a PC to an IP phone’s LAN port causes the switch to remove the voice VLAN, resulting in a 30 second loss of call audio. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Warning...

GS728TXv3 / GS728TXUPv3 / GS752TXv3 / GS752TXUPv3 Firmware Version 6.2.2.14 - NETGEAR Support

Bug Fixes: Fixes the issue where the IP phone that has LLDP enabled cannot join the voice VLAN. New Features and Enhancements: Support for the UI Dark Theme option. Replacement of all TFTP methods with HTTP to improve reliability. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port li...

GS728TXv3 / GS728TXUPv3 / GS752TXv3 / GS752TXUPv3 Firmware Version 6.2.2.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS728TXv3 / GS728TXUPv3 / GS752TXv3 / GS752TXUPv3 Firmware Version 6.2.1.42 - NETGEAR Support

Bug Fix: This firmware version is an initial release to support the new GS728TXv3, GS728TXUPv3, GS752TXv3 and GS752TXUPv3 models. Known issues: When you perform a cable test for all ports on the switch through Insight, some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Warnings: Read and follow these warnings before updat...

Which smart switches support 10G SFP+ slots and which optical modules can you install in an SFP+ slot? - NETGEAR Support

The GS728TXS, GS752TXS and XS712T smart switches support 10G small form-factor pluggable (SFP+) slots in which you can install optical modules: GS728TXS and GS752TXS. Support four SFP+ slots, two of which you can configure for either a 10G uplink or 10G stacking. XS712T. Supports two SFP+ slots that function as combo ports in which you can install10G Fiber or copper optical modules. You can use the SFP+ slots on the GS728TXS, GS752TXS, and XS712T to install either Gigabit SFP optical modules or ...

GS752TXS FP_COUNTER_TABLE Error | NETGEAR Communities

Morning All, Switch: GS752TXS (running in a stack of 3 with 10gb DAC)Firmware: 6.1.0.27 We are getting the following errors...

LAG with LACP GS752TXPv3 Windows Server | NETGEAR Communities

Hello,I have a problem on a GS752TXPv3 with setting up a LAG with LACP for a Windows server (2-port Intel NIC) with NIC-teaming.The Windows configuration ran...

Letter of Volatility - GS724T & GS752TXP | NETGEAR Communities

Hey all, I have been trying to reach support for over a week to no avail. I need letters/certificates of volatility for the following...

Where can I locate the version v5.2.0.26 for GS752TXS? | NETGEAR Communities

Hi, where can I locate the version v5.2.0.26 for GS752TXS?

GS752TXP-100NES / GS724T-400NAS letter of volatility | NETGEAR Communities

NETGEAR GS752TXP-100NES NETGEAR 52pt STKBOL POE SMART SW w/10GNETGEAR GS724T-400NAS NETWORK SWITCH - 24 PORT, 1GbE Can you someone please provide an LOV...

GS752TXS Switches with Zoom Phone | NETGEAR Communities

Hi all,I have recently implemented Zoom Phone in the office. I have been having problems with call quality and have worked with my firewall vendor to...

S3300-52X-PoE+ (GS752TXP) - No PoE | NETGEAR Communities

Hi Folks - I'm having an issue with an S3300 not providing any PoE.  The non-PoE devices show up but anything PoE powered isn't showing up in the...

GS752TXS bricked due to firmware-update? | NETGEAR Communities

Hi,In our continues efforts trying to be green we are still repurposing our NG switches;A GS752TSX had an older firmware running so we downloaded the latest...

Can a GS752TX stack with a S3300-28X? | NETGEAR Communities

I don't want to get rid of my G752TX but I need to 10G stack it - will it work with a S3300-28X in a stack or at 10G?

GS752TXS no reaction after FW update | NETGEAR Communities

Hello.I got today a GS752TXS with an old Firmware (FW-V5.2.0.20), thus I made an update to the latest Version (gs7xxtxs-v6.1.0.39.stk) with the procedure...

Gs752txp - maximum supported voice device limit 64 is reached | NETGEAR Communities

Hi Netgear Community,Has anyone seen this log message before and if so, could you let me know how to increase or remove the limit if possible, or at least...

Gs752txp or S3300 | NETGEAR Communities

GS752TPS, GS752TXS - Need help with SNMP and fans state | NETGEAR Communities

Hello, I have a similar problem as user milp (from this...

GS752TXP PoE stops working | NETGEAR Communities

I have a total of 4 GS752TXP switches, but one of them, the PoE works for sometimes if I reboot the switch, but eventually the PoE devices (cameras)...

GS752TXS device view | NETGEAR Communities

Hi, has anyone managed to solve the device view issue with these switches, its a bit of a minefield. If there is no direct resolution does anyone have a...

GS752TXS VLAN Trunk (to M4300) | NETGEAR Communities

Hello, i recentrly bought a M4300(M4300-12X12F) + this GS752TXS Switch.Now i figured out that i have no trunk option on the gs7 one.How should i...

EOL Letter of GS752TXS-100NAS | NETGEAR Communities

Hi,  Received an information about GS752TXS-100NAS is obsolete. Please assist to provide an official letter which announced this part EOL and...

GS752TXS stack has a bad switch. Need to swap in working switch and maintain port VLAN config | NETGEAR Communities

I have a stack of six GS752-TXS switches and one of the units has died.  The unit that has died is not the stack manager.  I have a new unit ready...

Connect GS728TPP SFP to GS752TX SFP+ | NETGEAR Communities

As the subject says, I am looking to connect these 2 switches via their SFP and SFP+ ports for uplink. I would like to run 2 cables between them, very short...

Increasing Wattage with GS752TXP | NETGEAR Communities

I am considering purchasing the NETGEAR 48 port POE Switch (GS752TXP) but need to ensure the switch will offer enough PoE to run my IP camera system. I see...

S3300-52X (GS752TX) | 52-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-52X (GS752TX) - 52-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports

S3300-52X-PoE+ (GS752TXP) | 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-52X-PoE+ (GS752TXP) - 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports

GS752TS(B) | 52-Port Gigabit Stackable Smart Switch with 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 SFP Stacking Cables (AGC761) | NETGEAR Support

GS752TS(B) - 52-Port Gigabit Stackable Smart Switch with 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 SFP Stacking Cables (AGC761)

GS752TPS(B) | 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE Ports, 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 10G SFP+ Cables (AGC761) | NETGEAR Support

GS752TPS(B) - 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE Ports, 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 10G SFP+ Cables (AGC761)

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

DK Productions & House of Magic

Discover how DK Productions collaborates with House of Magic using NETGEAR’s AV solutions for stunning results. Explore the case study.

IT Supervision Solutions - Enhance Network Management

Partnering for reliable, high-speed, and secure connectivity based on the NETGEAR Total Network Solution