Search results for: GS752TPPv3

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.41 - NETGEAR Support

Release Date: July 7, 2026 Bug Fixes: Fixes the issue where the switch becomes unreachable after renewing its DHCP-assigned IP address if the DHCP server is temporarily unavailable during lease renewal. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports might not display. Workaround: perform a cable test for a single port on the switch through Insight. After you change the IP address of the switch, it might take around 6 minutes to...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.1.11 - NETGEAR Support

Release Date: July 7, 2025 New Features and Enhancements: Support for the UI Dark Theme Support for DHCP servers and DHCP relays. Support for HTTP, instead of TFTP, to improve reliability Support for 16 allowed LLDP neighbors per port Increased the maximum supported password length to 64 characters Reduced the query response time when polling SNMP MIB Removed the Diffie-Hellman key exchange algorithms that might pose security concerns. Bug Fixes: Fixes the issue where the GS752TPv3 and GS752TPPv...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.19 - NETGEAR Support

Enhancement: When you change to the NETGEAR Insight mode for the first time, the device IP address and VLAN settings are now kept instead of being reset to default values. Bug fixes: The switch cannot be accessed if DHCP server assigns an IP in the range of 192.168.0.x. The switch cannot be accessed after assigning a static IP through Insight. Known issues: Some port results are not displayed when doing all ports Cable Test via Insight. It will take around 10~15 minutes to update IP address at D...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.25 - NETGEAR Support

New features: Support for the Protected Port feature through Insight cloud management. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.netgear.com/files/GDC/GS728TPPv3/GS728TPv3_GS728TP...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.24 - NETGEAR Support

Bug Fixes: Fixes the issue where the switch stops forwarding all multicast control packets after any of the ARP table entries ages out. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.n...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.13 - NETGEAR Support

Bug Fixes: Fixes the issue where connecting a computer to an IP phone’s LAN port causes the switch to remove the voice VLAN, resulting in a 30 second loss of call audio. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports may not display. After you change the IP address of the switch, it may take 10 to 15 minutes to update the IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.0.36 - NETGEAR Support

Enhancements: You can now use the new NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight app to discover the switch in the same subnet. The NDT supports UPnP, which is now the preferred method of discovery. Bug Fixes: Fixes the issue where the switch sends incorrect VLAN port members to the SNMP manager. Known issues: When performing a cable test for all ports on the switch through Insight, results for some ports may not display. After changing the IP address of the switch, it may take 1...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.16 - NETGEAR Support

New Features: PoE self-healing reboots a connected powered device if the PD becomes unresponsive. Bug fixes: The PVID setting cannot be cleared by clicking the Clear button. The registration link on the GUI is incorrectly using the URL for Insight portal website. An untranslated "Apply" button on some German and Japanese UI pages doesn’t work. Enabling Auto-DoS does not automatically select all DoS options. SNMPv3 doesn't work after you log in with a newly configured password. Known Issues: The ...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.12 - NETGEAR Support

Bug Fixes: Fixes the issue where the management VLAN ID may be overwritten with the default value on a trunk port when you manage the switch through Insight. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports may not display. After you change the IP address of the switch, it may take 10 to 15 minutes to update the IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Wa...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.31 - NETGEAR Support

Features and Enhancements: Addition of bidirectional synchronization of the configuration settings between Insight and the device UI Addition of online checks for new firmware updates Insight management mode is now enabled by default Update to the Dashboard page in the device UI Known issue: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP addres...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.0.15 - NETGEAR Support

New Features: New responsive user interface (UI) that can adjust to the size of your screen Auto-Camera VLAN Auto-WiFi VLAN Known Issues: The admin page is not reachable if the switch is in a 192.168.0.0 subnet and obtains an IP other than 192.168.0.239. Workaround: Set a DHCP reservation for the switch so that it obtains the IP address 192.168.0.239. If there are multiple switches, then isolate each switch from the network, access each switch at the default IP address 192.168.0.239 and configur...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.22 - NETGEAR Support

New Features: Supports the management of DHCP snooping and L2 relay through Insight. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The D...

NMS300 Software Version 1.7.0.20 - NETGEAR Support

New Features: This version supports the following new switches: GS724TPv3 and GS724TPPv3 GS728TPv3, GS728TPPv3, GS752TPv3, and GS752TPPv3 Bug Fixes: Fixes the issue where you cannot download a configuration file from the switch via the NMS300. Fixes the issue where you cannot update firmware from the NMS300. Security Fixes: This software addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known Issue: Any type of ...

I cannot access the admin page of my NETGEAR Smart Switch; what do I do? - NETGEAR Support

This article applies only if your network uses a 192.168.0.0 subnet and only to the following NETGEAR smart switches and firmware versions: GS724TPv3: Firmware 6.2.0.16 and below. GS724TPPv3: Firmware 6.2.0.16 and below. GS728TPv3: Firmware 6.2.0.16 and below. GS728TPPv3: Firmware 6.2.0.16 and below. GS752TPv3: Firmware 6.2.0.16 and below. GS752TPPv3: Firmware 6.2.0.16 and below. MS324TXUP: Firmware 1.0.0.25 and below. If you are unable to access the admin page of your smart switch and your netw...

Bi-Directional Sync on Insight-managed Smart Switches with Insight - NETGEAR Support

Insight bidirectional synchronization instantly updates the Insight cloud whenever you change settings through the device UI. If a local change affects only the switch, Insight synchronizes the change immediately. If the change affects the entire Insight network configuration, Insight does not synchronize the change. Instead, Insight sends a notification indicating that the network-level configuration changed on a specific device. The next time the switch restarts, Insight overrides the local ch...

NETGEAR Insight Cloud Portal and App version 7.4 - NETGEAR Support

< Insight 7.5 Insight 7.3 > NETGEAR Insight Cloud Portal version 7.4 version 7.4.2 Version 7.4.4 Version 7.4.2 Release Date: June 15, 2024 New Features: Adds support on the PR60X and PR460X Pro Routers for OpenVPN at the device level, VLAN DHCP options 15 and 42, and VPN client access control, including support for multiple subnets. Adds support for RF profiles as well as default and newly defined customer profiles for ProAV and IT deployments. Add support for instant synchronization of local UI...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

Netgear GS752TPP v3 and IP phone problem | NETGEAR Communities

Hello,I got a problem with GS752TPPv3 and IP phones.For some reasons, when we connect IP phone to this switch, the sound is bad. Also, we noticed, that it is...

GS752TPP - STP is disabling/blocking several ports | NETGEAR Communities

I have a client using a&nbsp;GS752TPPv3 with firmware&nbsp;6.1.0.10 in an AV system environment. I generally use the M4300/M4200 line up but this model was...

LAG with LACP GS752TXPv3 Windows Server | NETGEAR Communities

Hello,I have a problem on a GS752TXPv3 with setting up a LAG with LACP for a Windows server (2-port Intel NIC) with NIC-teaming.The Windows configuration ran...

Netgear GS752TPv3 Logs Flooded with Restarted ConfigAgent - No Health response | NETGEAR Communities

Hello,We have a Netgear GS752TPv3 that we have configured to write logs to our Syslog server and we've found that it is flooding the log with the same 2...

Configure SSL/HTTPS for GS724TPV2 and GS752TPv3 | NETGEAR Communities

Hi All, I am looking to enable HTTPS for all my Netgear Switches (GS724TPV2 and GS752TPV3). But I cannot import the self-signed certificate that I have...

VLAN | NETGEAR Communities

Hi an alle,ich habe einen GS752TXPv3 Switch und würde gerne ein VLAN 50 untagged erstellen 192.168.50.0/255.255.255.0im VLAN1 - 192.168.1.0/255.255.255.0...

Bonjour device discovery issue | NETGEAR Communities

Hi, I have recently replace an old L2/L3 switch with Netgear&nbsp;GS752TPV3. Bonjour devices such as printers and other devices fails to be discovered by...

NO internet access after assigning ports to VLAN | NETGEAR Communities

Hi,&nbsp;We purchased a new switch GS752TPv3 model.&nbsp;I created vlans and assigned ports to the vlan and also assign PVID after assigning the ports to the...

GS752TP VLAN | NETGEAR Communities

I had an old GS752TPv1.&nbsp; It died.&nbsp; I got a GS752TPv3.&nbsp;So I recreated the VLANS I had.&nbsp;I can’t seem to connect to the internet with them...

Can't configure SFP ports (49-52) on GS752TPv2 | NETGEAR Communities

HiI have two GS752TPv2 switches connected via SFP and fibre to form a small isolated LAN. I need to configure the SFP port (51) but in the web gui port 49-52...

Switch GS752TPP rules ACLs creation problem | NETGEAR Communities

Hello,I'm having trouble assigning an ACL rule to the switch portsand I can't figure out what's missing in the configuration I'm trying to set up.The switch...

GS724TPPv3 (FW v6.1.0.10) PoE MIBs error | NETGEAR Communities

Hi,I'm trying to check/enable/disable PoE on switch ports via SNMP. The problem is that I'm using MIBs for firmware version 6.2.1.12 but my switch has...

GS724TPPV3 possibly blocking VRRP on my mobility express primary election port 112 | NETGEAR Communities

we have just started replacing our older switches and immediatly have started a new problem.&nbsp;&nbsp; We have Cisco AP's using the Mobility express and as...

Turn off Multicasting per port on GS752TPP? | NETGEAR Communities

Can you turn off multicasting per port on this switch? If so, how?&nbsp;Thank you

GS752TPv2 and GS724TPv2 dont 802.1x authenticate some wpa_supplicant clients | NETGEAR Communities

Hi,i'm operating GS752TPv2 and GS724TPv2 and other managed switches. I have started to implement 802.1x port authentication, which generally works very...

Netgear GS752TPP VLANs not getting DHCPs or connecting to the internet | NETGEAR Communities

Greetings!&nbsp; I am a newbie at VLANs and am attempting to set up a more secure network for a non-profit.&nbsp; We have a Netgate 2100 and a Netgear...

CAD File for NETGEAR 48 Port GbE PoE+ Smart Managed Pro Switch, 4 SFP, 380W (GS752TPv2) | NETGEAR Communities

Good day all.&nbsp;I need the CAD format of this equipment:NETGEAR 48 Port GbE PoE+ Smart Managed Pro Switch, 4 SFP, 380W (GS752TPv2) &nbsp;&nbsp;&nbsp;I...

Netgear GS752TPv2 changed VLAN tagging after reboot. | NETGEAR Communities

Good afternoon everyone!&nbsp;I have a Netgear GS752TPv2 switch (version: 6.0.2.5) with a few VLANs:11 - Administrative31 - VoIP101 - PublicWhile not on-site...

NFS Mounting issues with MX4300-24XF and GS752TPV2 | NETGEAR Communities

Hello,&nbsp;I've been trying to troubleshoot an NFS mounting issue.&nbsp; The center of my network is a pair of MX4300's and I have GS752TPV2's hanging off...

GS752TPv2 firmware failure, or hardware failure? | NETGEAR Communities

I picked up a used GS752TPv2 that was "tested, powers on."&nbsp; That it does, but I get no connectivity on any ports.&nbsp; I got into the serial console...

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

DK Productions & House of Magic

Discover how DK Productions collaborates with House of Magic using NETGEAR’s AV solutions for stunning results. Explore the case study.

IT Supervision Solutions - Enhance Network Management

Partnering for reliable, high-speed, and secure connectivity based on the NETGEAR Total Network Solution