Search results for: GS752TP

GS728/GS752TP/GS728TPP Firmware Version 6.0.0.64 - NETGEAR Support

GS752TP, GS728TP and GS728TPP are NETGEAR's new smart Gigabit PoE/PoE+ switch. This release notes contains known issues and limitations for GS752TP/GS728TP/GS728TPP firmware. And note that boot code 2.0.0.6 is also released together with this firmware. GS752TP, GS728TP and GS728TPP support the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. Known issues: LED mode and PoE Max LEDs in Device View are incorrectly lighted in PoE ...

GS728TP/GS752TP/GS728TPP Firmware Version 6.0.1.16 - NETGEAR Support

Note It will take about 8 minutes for the first boot up after upgrade to 6.0.1.16 from previous releases 6.0.x.x, because the switch will auto-upgrade the new PoE firmware. Please wait patiently till the switch completely boot up. GS752TP, GS728TP and GS728TPP support Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. Fixed issues Unable to get any value from MIB object table - Dot1dTpFdbTable There is delay (3~6 seconds) when powering...

GS728/GS752TP/GS728TPP Firmware Version 6.0.1.14 - NETGEAR Support

GS752TP, GS728TP and GS728TPP are NETGEAR's new smart Gigabit PoE/PoE+ switch. The new maintenance release 6.0.1.14 is to support new Samsung SDRAM in GS728TPP and fixed some SW bugs. Moreover, the enclosed PoE firmware is also upgraded to new version 2.4.8. Note that: It will take about 8 minutes for the first boot up after upgrade to 6.0.1.14 from 6.0.0.x, because the switch will auto-upgrade the new PoE firmware. Please wait patiently till the switch completely boot up. New boot code 2.0.0.11...

GS728TP/GS752TP/GS728TPP Firmware Version 6.0.1.18 - NETGEAR Support

Note It will take about 8 minutes for the first boot up after upgrade to 6.0.1.18 from previous releases 6.0.x.x, because the switch will auto-upgrade the new PoE firmware. Please wait patiently till the switch completely boot up. GS752TP, GS728TP and GS728TPP support Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. New Features and Enhancements Improved switch security to guard against cross-site-scripting attacks. Fixed issues Only...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.3.3 - NETGEAR Support

MPORTANT CHANGES NOTE: This new firmware release requires product registration to unlock full access to the local browser UI. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. New Features and Enhancements: Faster application of multiple port configuration settings through the Insight Cloud Portal and the Insight app. Bug Fixes: Port now sends properly formed IGMP queries after booting up with non-default VLAN (VLAN 1). Switch connectivity is no ...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.6.2 - NETGEAR Support

New Features and Enhancements: Registration is no longer required to access the full UI menu. It can be skipped at UI login. Insight management mode is disabled by default. Select the “NETGEAR Insight Mobile App and Insight Cloud Portal” radio button to enable Insight management mode. You can pause Insight management mode at any time to temporarily manage the switch through the device UI by selecting the “Local-Only GUI” radio button. To return to Insight management mode, select the “NETGEAR Ins...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.41 - NETGEAR Support

Release Date: July 7, 2026 Bug Fixes: Fixes the issue where the switch becomes unreachable after renewing its DHCP-assigned IP address if the DHCP server is temporarily unavailable during lease renewal. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports might not display. Workaround: perform a cable test for a single port on the switch through Insight. After you change the IP address of the switch, it might take around 6 minutes to...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.48 - NETGEAR Support

Security Fixes: PSV-2019-0059 PSV-2019-0066 Bug Fixes: [LLDP-MED] LLDP Network Policy Not being send to Polycom VVX401 phones correctly [IGMP snooping] Multicast stream is interrupted for around 1-2 seconds when a device leaves a Multicast group [ACL] Implicit deny is not working when configuring MAC address Access Control List [SNMP] Uptime reported via SNMP gets reset after around 49 days [SNMP] SNMP service hangs up after 1-2 days Known Issues: [File management] Copy image fail [Workaround]: ...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware version 6.2.1.11 - NETGEAR Support

Release Date: July 7, 2025 New Features and Enhancements: Support for the UI Dark Theme Support for DHCP servers and DHCP relays. Support for HTTP, instead of TFTP, to improve reliability Support for 16 allowed LLDP neighbors per port Increased the maximum supported password length to 64 characters Reduced the query response time when polling SNMP MIB Removed the Diffie-Hellman key exchange algorithms that might pose security concerns. Bug Fixes: Fixes the issue where the GS752TPv3 and GS752TPPv...

GS728TP/GS728TPP/GS752TP Firmware Version 6.0.1.29 - NETGEAR Support

New Features and Enhancements: To comply with California state law, the switch now requires that you change the default password after using it to access the local browser UI. Security Fixes: PSV-2019-0059 For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: System Up Time now continues to count past 248 days. Switch now correctly enforces password length limit of 20 characters. Limitations Reboot is required when changing between Switch m...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.19 - NETGEAR Support

Enhancement: When you change to the NETGEAR Insight mode for the first time, the device IP address and VLAN settings are now kept instead of being reset to default values. Bug fixes: The switch cannot be accessed if DHCP server assigns an IP in the range of 192.168.0.x. The switch cannot be accessed after assigning a static IP through Insight. Known issues: Some port results are not displayed when doing all ports Cable Test via Insight. It will take around 10~15 minutes to update IP address at D...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.31 - NETGEAR Support

GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades. New features and enhancements: Initial Release Notes: The USB storage device that you attach to the USB port must comply with the following requirements: - The USB device must support USB 2.0. - The USB device must support the FAT32 or VFAT file system. The NTFS file system is not supported.. Known issue: The device does no...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.9.3 - NETGEAR Support

Bug Fixes: Fixes the issue on the System > Device View page where the power LED of the device is not shown lit. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 6.0.9.1: We recommend against downgrading the firmware image to 6.0.8.x or earlier version after updating to 6.0.9.1 or later versions. Since HTTPS i...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.25 - NETGEAR Support

New features: Support for the Protected Port feature through Insight cloud management. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.netgear.com/files/GDC/GS728TPPv3/GS728TPv3_GS728TP...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.10 - NETGEAR Support

New Features: Add Secure Diagnostic Mode (SDM) to allow NETGEAR Support to establish a secured connection for remote troubleshooting. This is disabled by default. Bug Fixes: Fixes the issue when an OUI is added, the last two hexadecimal are changed to E0 instead of the entered value. Changes: After HTTPS is enabled, accessing the device UI via HTTP is not redirected to HTTPS. Warnings: Read and follow these warnings before updating a firmware version: We recommend against downgrading the firmwar...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.37 - NETGEAR Support

GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades. New features and enhancements: Improved German and Japanese translation for Web GUI and context help.. Changed MVR VLAN setting behavior to be consistent as other NETGEAR smart switches. Fixed Issues: Device may run out of memory if there is a frequent renewal of DHCP IPv6 address. Can't set the PVID of a port when the lang...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.0.24 - NETGEAR Support

Bug Fixes: Fixes the issue where the switch stops forwarding all multicast control packets after any of the ARP table entries ages out. Known issues: Results for some ports are not displayed when you do a cable test for all ports through Insight. It might take between 10 and 15 minutes to update an IP address in the Device list on Insight after a device’s IP address is changed. The DHCP binding table is emptied after a port link goes down and comes back up. Download Link: https://www.downloads.n...

GS728TPv3 / GS728TPPv3 / GS752TPv3 / GS752TPPv3 Firmware Version 6.2.1.13 - NETGEAR Support

Bug Fixes: Fixes the issue where connecting a computer to an IP phone’s LAN port causes the switch to remove the voice VLAN, resulting in a 30 second loss of call audio. Known issues: When you perform a cable test for all ports on the switch through Insight, the results for some ports may not display. After you change the IP address of the switch, it may take 10 to 15 minutes to update the IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.26 - NETGEAR Support

New Features and Enhancements: The maximum number of LLDP (Link Layer Discovery Protocol) neighbors supported by the switch has been increased. This enhancement improves compatibility in environments with high device density and ensures more comprehensive network topology discovery. Bug Fix: Fixes the issue where the switch could go offline in Insight when using a Layer 3 VLAN. The update ensures the switch stays connected in this setup. Warnings: Read and follow these warnings before you update...

voice quality not good on avaya 5610 voip phones, switch gs752tp | NETGEAR Communities

hello, the gs752tp switch has the voice and data vlan, the vlans are working the way they should. avaya 5610 phones getting config and ip from voice vlan, pc...

Netgear GS752TPS Slow after stack master election. | NETGEAR Communities

I have two GS752TPS switches stacked together using the standard Netgear stacking cable. An issue occurred after a power failure that resulted in the stack...

GS752TPS Gain Access to Management VLAN using Loopback? | NETGEAR Communities

I've tried using netgear support for this issue but the guys in India aren't aware that their GS7xx models don't allow the management VLAN to be on the same...

GS752TP - Slow Web Interface | NETGEAR Communities

Anyone else have this problem? The web interface is so slow as to almost become unusable. It loads the background then just hangs for a good 20 to 30...

GS752TP - POE Ports OtherFault | NETGEAR Communities

I have 2 GS752TP installed and only one is having the issue. Connecting IP phones to the ports when POE is enabled the phones will not come up and show...

Help GS752TPS with XS712T and FVS336G v2 | NETGEAR Communities

Hi EveryoneQuestion for expanding my network. I currently have a FVS336G v2 running into a 24TPS. I've upgraded to the GS752TPS. I'm also considering adding...

Can't configure SFP ports (49-52) on GS752TPv2 | NETGEAR Communities

HiI have two GS752TPv2 switches connected via SFP and fibre to form a small isolated LAN. I need to configure the SFP port (51) but in the web gui port 49-52...

Switch GS752TPP rules ACLs creation problem | NETGEAR Communities

Hello,I'm having trouble assigning an ACL rule to the switch portsand I can't figure out what's missing in the configuration I'm trying to set up.The switch...

GS752TPP - STP is disabling/blocking several ports | NETGEAR Communities

I have a client using a GS752TPPv3 with firmware 6.1.0.10 in an AV system environment. I generally use the M4300/M4200 line up but this model was...

Netgear GS752TPv3 Logs Flooded with Restarted ConfigAgent - No Health response | NETGEAR Communities

Hello,We have a Netgear GS752TPv3 that we have configured to write logs to our Syslog server and we've found that it is flooding the log with the same 2...

Netgear GS752TPP v3 and IP phone problem | NETGEAR Communities

Hello,I got a problem with GS752TPPv3 and IP phones.For some reasons, when we connect IP phone to this switch, the sound is bad. Also, we noticed, that it is...

Letter of volatility for GS752TP-300NAS | NETGEAR Communities

Hi, I am looking for the letter of volatility for GS752TP-300NAS. Really appreciate it if someone can provide a link to the LoV. Thank you.

GS752TP static mac address not found in mac table | NETGEAR Communities

Hi, i have started to implement port security. I have several computers that are connected via a switch in a desktop telephone to a port on a GS752TP....

Turn off Multicasting per port on GS752TPP? | NETGEAR Communities

Can you turn off multicasting per port on this switch? If so, how? Thank you

GS752TPv2 and GS724TPv2 dont 802.1x authenticate some wpa_supplicant clients | NETGEAR Communities

Hi,i'm operating GS752TPv2 and GS724TPv2 and other managed switches. I have started to implement 802.1x port authentication, which generally works very...

Netgear GS752TPP VLANs not getting DHCPs or connecting to the internet | NETGEAR Communities

Greetings!  I am a newbie at VLANs and am attempting to set up a more secure network for a non-profit.  We have a Netgate 2100 and a Netgear...

Configure SSL/HTTPS for GS724TPV2 and GS752TPv3 | NETGEAR Communities

Hi All, I am looking to enable HTTPS for all my Netgear Switches (GS724TPV2 and GS752TPV3). But I cannot import the self-signed certificate that I have...

CAD File for NETGEAR 48 Port GbE PoE+ Smart Managed Pro Switch, 4 SFP, 380W (GS752TPv2) | NETGEAR Communities

Good day all. I need the CAD format of this equipment:NETGEAR 48 Port GbE PoE+ Smart Managed Pro Switch, 4 SFP, 380W (GS752TPv2)    I...

GS752TP VLAN | NETGEAR Communities

I had an old GS752TPv1.  It died.  I got a GS752TPv3. So I recreated the VLANS I had. I can’t seem to connect to the internet with them...

Netgear GS752TPv2 changed VLAN tagging after reboot. | NETGEAR Communities

Good afternoon everyone! I have a Netgear GS752TPv2 switch (version: 6.0.2.5) with a few VLANs:11 - Administrative31 - VoIP101 - PublicWhile not on-site...

GS752TPS(B) | 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE Ports, 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 10G SFP+ Cables (AGC761) | NETGEAR Support

GS752TPS(B) - 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE Ports, 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 10G SFP+ Cables (AGC761)

S3300-52X (GS752TX) | 52-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-52X (GS752TX) - 52-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports

GS752TS(B) | 52-Port Gigabit Stackable Smart Switch with 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 SFP Stacking Cables (AGC761) | NETGEAR Support

GS752TS(B) - 52-Port Gigabit Stackable Smart Switch with 2 Copper/SFP+ (2.5G) and 4 Dedicated SFP+ Ports (2.5G), plus 2 SFP Stacking Cables (AGC761)

S3300-52X-PoE+ (GS752TXP) | 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-52X-PoE+ (GS752TXP) - 52-Port Gigabit Ethernet Stackable Smart Switch with 48 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

DK Productions & House of Magic

Discover how DK Productions collaborates with House of Magic using NETGEAR’s AV solutions for stunning results. Explore the case study.

IT Supervision Solutions - Enhance Network Management

Partnering for reliable, high-speed, and secure connectivity based on the NETGEAR Total Network Solution