Search results for: GS728TXS

GS728TXS / GS752TXS Firmware Version 6.1.0.39 - NETGEAR Support

Bug Fixes: For compliance with California state law, the default “password” must be changed after logging into the switch. To configure SNMPv3, Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. If you upgrade firmware to V6.1.0.39 from an older version, clear your temporary internet files or browser cache to see the new settings. Added a new option under Security > Management Security > SCC Control to disable or enable S...

GS728TXS / GS752TXS Firmware Version 6.1.0.36 - NETGEAR Support

Bug Fixes: Multicast packet with destination MAC address of 01:80:c2:00:00:1c and Ethernet type of 0x88CC causes loop in properly converged STP topology. Debugging URL of ‘devshell’ is accessible without authentication. Known Issues: Master unit is unexpectedly changed after reboot the whole stack many times. Workaround:Assign the master unit with a higher priority. Interface Shaping Rate doesn’t work on GS7xxTXS when shape is configured with min value 16. Workaround:The min effective value is 5...

GS728TXS/GS752TXS Firmware Version 6.1.0.12 - NETGEAR Support

GS728TXS and GS752TXS are NETGEAR's new generation of Gigabit Stackable Smart Switch with new or enhanced features such as 10G uplink, Static Routing, Green Ethernet, IPv6 Service, Dot1x VLAN Assignment, DHCP Snooping and DoS (Denial of Service) protection. Note that GS728TXS is new product, and GS752TXS was released with firmware 5.2.0.x in July 2011. New SW release 6.1.0.x will support both GS728TXS and GS752TXS. GS728TXS and GS752TXS support the latest Smart Control Center, please use SCC ver...

GS728TXS / GS752TXS Firmware Version 6.1.0.27 - NETGEAR Support

GS728TXS and GS752TXS are NETGEAR’s new generation of Gigabit Stackable Smart Switch with new or enhanced features such as 10G uplink, Static Routing, Green Ethernet, IPv6 Service, Dot1x VLAN Assignment, DHCP Snooping and DoS (Denial of Service) protection. This maintenance release 6.1.0.27 is to fix some critical customer issues. And in this release some more debug info was also added to help debug in customer filed. Note: Maintenance release 6.1.0.x supports both GS728TXS and GS752TXS. Previou...

GS728TXS / GS752TXS Firmware Version 6.1.0.35 - NETGEAR Support

Bug Fixes: A security issue of “CVE-2013-4775” (published on CVE web site https://cve.mitre.org/) that can allow remote attackers to read startup configuration file. Device view does not work after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer. Instead of showing the actual system IP, SNMP TRAP always display “192.168.0.239” for its agent IP. Stack system can't be accessed when stack master switchovers soon after deleting an empty unit. After an IGMP Snooping VL...

Which smart switches support 10G SFP+ slots and which optical modules can you install in an SFP+ slot? - NETGEAR Support

The GS728TXS, GS752TXS and XS712T smart switches support 10G small form-factor pluggable (SFP+) slots in which you can install optical modules: GS728TXS and GS752TXS. Support four SFP+ slots, two of which you can configure for either a 10G uplink or 10G stacking. XS712T. Supports two SFP+ slots that function as combo ports in which you can install10G Fiber or copper optical modules. You can use the SFP+ slots on the GS728TXS, GS752TXS, and XS712T to install either Gigabit SFP optical modules or ...

NMS300 Software Release 1.1.0.13 - NETGEAR Support

Release date: June 14th 2013 This release notes contains features and known issues for NETGEAR ProSAFE NMS 300 Network Management Software release 1.1.0.13. Key features available in this software are the following: Support for NETGEAR Managed and Smart switches Support for discovery and node status monitoring of third-party devices NOTE: Support for NETGEAR Wireless, Security & Storage devices will be available in a future release of NMS300. Following NETGEAR Managed Switches are currently supp...

NMS300 Software Release 1.2.0.16 - NETGEAR Support

Release date: September 16th 2013 This release notes contains features and known issues for NETGEAR ProSAFE NMS 300 Network Management Software release 1.2.0.16. Key features available in this software are the following: Support for NETGEAR ProSAFE Wireless products (see models number in below list). Support for NETGEAR ProSAFE Firewall FVS318G. NOTE: Support for NETGEAR Storage & remaining Security devices will be available in a future release of NMS300. Following NETGEAR ProSAFE Wireless produ...

Security Advisory for CVE-2013-4775, PSV-2016-0093 - NETGEAR Support

The original version of this advisory and the Encripto Security Advisory where this issue was identified incorrectly asserted that this defect could be exploited by a “remote attacker.” In fact, an attacker trying to exploit this vulnerability must be either physically or logically present on the same subnet as the switch. NETGEAR is aware of a security issue that can allow attackers on your local network to read startup configuration files, including encrypted admin credentials, for some models...

Security Advisory for Authentication Bypass and Remote Command Execution on Some Smart and Managed Switches, PSV-2017-0857 - NETGEAR Support

NETGEAR is aware of a security issue that can allow an attacker to access the debugging URL of some models of Smart and Managed Switches without first authenticating. After accessing the debugging URL, the attacker can then execute commands on the switch, such as resetting or restarting the switch. This attack can only be executed remotely if the switch itself can be accessed remotely; for most users, a firewall will block access from outside the local network. This vulnerability affects the fol...

What is stacking, which smart switches support it, and what are the functionalities of stacking? - NETGEAR Support

A stack is a collection of switches in which one switch controls the operation of all switches. This controlling switch is called the stack manager. The remaining switches in the stack are called stack members. The stack manager and members use stacking technology to function as a unified system. The switch stack is presented to the network as a single entity. The stack manager is the single point of management for the stack. The network IP address of a stack enables the network to identify the ...

Getting started with the XS728T 10-Gigabit Smart Managed Switch - NETGEAR Support

The XS728T is a 28-port 10-Gigabit Ethernet Smart Managed Switch. It supports 24 copper 10GBased-T ports and four dedicated 1G/10G fiber ports. Frequently Asked Questions 1. What are the major enhancements for the XS728T compared with the XS712T? More 10G copper ports and fiber ports One USB port for firmware upgrade and configuration backup IPv6 Static Routing New GUI style that supports the most popular WEB Browsers (see Question 11 below for a complete list) 2. What cables can be used with th...

GS728TS, GS752TS, GS728TPS and GS752TPS Firmware Version 5.3.0.31 - NETGEAR Support

Bug Fixes: Multicast packet with destination MAC address of 01:80:c2:00:00:1c and Ethernet type of 0x88CC causes loop in properly converged STP topology. Debugging URL of ‘devshell’ is accessible without authentication. Fiber port 50 goes down when copper port47/port48 links up. Cannot access switch via HTTPS when using the certificate generated by the switch. Notes: The released zip contains switch firmware (gs7xxts_tps-v5.3.0.31.stk) and MIB files. Please unzip the file to extract the switch i...

GS728TS, GS752TS, GS728TPS and GS752TPS Firmware Version 5.3.0.25 - NETGEAR Support

Fixed issues: Switch cannot be accessed via WEB GUI after running some time. Switch loses connection to SNTP Auto-VoIP messages of 'send failed' Voice vlan affect the PVID of port when Voice device is connected Switch reboots 2 times after after about 15 minutes Need to have a way to create and download the techsupport file via web page for TPS switch Problems with the Status LEDs Error logs are continuously logged in memory every few seconds Failed to configure VLAN port membership through SNMP...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.2.15 - NETGEAR Support

Bug Fixes: Fixes the issue where the management VLAN ID may be overwritten with the default value on a trunk port when you manage the switch through Insight. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Warnings: Rea...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.2.40 - NETGEAR Support

Release Date: April 17, 2026 Enhancement: Increase of the time zone name to 7 characters. Restriction: Switches manufactured with this firmware or later versions do not support firmware downgrades. Note: You can still perform firmware downgrades on switches that were manufactured with older firmware versions. Bug Fixes: This firmware addresses the following bugs: Fixes the issue where whole subnet DHCP exclusion rules affect other configured DHCP pools. Fixes the issue where MAC/IP ACL rules wer...

GS728TS, GS752TS, GS728TPS and GS752TPS Firmware Version 5.3.0.17 - NETGEAR Support

Supported Models: GS728TS, GS752TS, GS728TPS and GS752TPS • The GS728TS/GS752TS Smart Switch has 24/48 10/100/1000 Mbps copper ports and 6 SFP fiber ports, 2 of which are combo ports. Up to two SFP ports (the last two ports) at a time can be used as 2.5G stacking ports to create six unit stack system. • The GS728TS/GS752TS Smart Switch has 24/48 10/100/1000 Mbps PoE capable copper ports and 6 SFP fiber ports, 2 of which are combo ports. Up to two SFP ports (the last two ports) at a time can be u...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.1.32 - NETGEAR Support

Enhancements: You can now use the new NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight app to discover the switch in the same subnet. The NDT supports UPnP, which is now the preferred method of discovery. Known issue: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and come...

GS728TXv3 / GS728TXUPv3 / GS752TXv3 / GS752TXUPv3 Firmware Version 6.2.2.15 - NETGEAR Support

Bug Fixes: Fixes the issue where the management VLAN ID may be overwritten with the default value on a trunk port when you manage the switch through Insight. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the IP address of a device changes, it can take 10 to 15 minutes to update an IP address in the Device list on Insight. After a port link fails and comes back up, the DHCP binding table empties. Warnings: Rea...

GS728TXPv3 / GS752TXPv3 Firmware Version 6.2.2.14 - NETGEAR Support

New Features and Enhancements: Support for the UI Dark Theme option. Replacement of all TFTP methods with HTTP to improve reliability. Bug Fixes: Fixes the issue where the GS752TXPv3 switch might not forward packets between ports 1 – 24, 49, 50, and ports 25 – 48, 51 and 52. Fixes the issue where the IP phone that has LLDP enabled cannot join the voice VLAN. Known issues: When you perform a cable test for all ports on the switch through Insight, results for some ports do not display. After the I...

connecting GS728TXS and GC728XP with AXC761 | NETGEAR Communities

Hello,I want to connect my two switches (GS728TXS and GC728XP) to work as one.Simply plugging the AXC761-cable into some 10G-ports does not work.I need some...

GS728TXS x27 and x28 SFP+ Slots Not Working | NETGEAR Communities

Hello, I have a GS728TXS upgraded to the latest 6.1.0.36 firmware. I have 10G links working fine on xg25 & xg26 ports. I've tried 2 different brands of...

SFP+ Module AXM765 compatible with GS728TXS | NETGEAR Communities

Hallo,   does it work? Is not specified in the documention.   Thank you and best regards    

GS728TX vs GS728TXS | NETGEAR Communities

Can anyone help me figuring out what the differences between GS728TX and GS728TXS are? They are from two difference series but from their model numbers...

SFP+ slots do not work at 1GE on GS728TXS | NETGEAR Communities

According to its specification the Netgear GS728TXS switch supports optical signals with line rates of 1GE or 10GE on ports xg25..xg28. All works fine for...

S3300-28X Failing SFP Port | NETGEAR Communities

We have a fiber ring established with ProSAFE 24 Port Stackable Smart Switch (GS728TXS) Stackable switches. One of the switches has an SFP port, port 28...

Switch for Stack with 4 SFP+ | NETGEAR Communities

Hello, I already own a GS728TXS switch wich I use in my server cabinet.  I want to build a home lab in an adjacent room and I'm looking for a switch to...

GS728TXPv3 Stacking with S3300-28X-PoE+ (GS728TXP) | NETGEAR Communities

Hello, i recently got a replacement for one S3300-28X-PoE+ (GS728TXP) and it is called GS728TXPv3.The GUI is completely different and i cannot find the...

Can a netgear GS728ts route vlans with a cisco porepower router/firewall | NETGEAR Communities

Hi,I am in the process of putting together a second vlan onto our network.We have about 8 gs728ts managed switches and a bunch of smaller managed ones. (we...

GS728TXP (S3300-28X-PoE+) EOL Bonjour/mDNS issue | NETGEAR Communities

Hi: Recently got a project relate with EOL switch S3300 for mDNS service. It seems mDNS didn't run through uplink to other switches. I googled...

GS728TXP (S3300-28X-PoE+) EOL // Replacement? | NETGEAR Communities

I notice the GS728TXP (S3300-28X-PoE+) switch I bought a few months ago has now been listed as EOL. What switch will be taking the place of the...

GS728TXP Insight Support | NETGEAR Communities

Does anyone know if the GS728TXP will get Insight support in the future? Seems like it could be useful to some users who bought the switch due to the 4x 10Gb...

Replaced GS724Tv4 with GS728TXP and AirPrint Will No Longer Work | NETGEAR Communities

Hi, I had a working configuration with IGMP snooping enabled per directions found in the forum. All mdns functions on the network were working....

GS752TPS / GS728TPS not showing in stack | NETGEAR Communities

After doing a maintenance, which included opening my switches and blowing compressed air on the components, 2 of my switches don't show anymore in the stack....

Failover link between two GS728TPs | NETGEAR Communities

I have two GS728 switches in different buildings. There are two links between the buildings; a point-to-point wireless and a fibre. I would like to have both...

NETGEAR GS728TX (S3300-28X) Stencils | NETGEAR Communities

Hi, will there be stencils for this switch added anytime soon please? There are PoE models in current Netgear Stencils pack, but not the non-PoE ones. I...

DHCP relay on GS728TX | NETGEAR Communities

Good day! I have 2 switches S3300-28X (GS728TX). They are stacked.I am trying to build the core of the network on them. Created several vlan, configured...

GS728TXP with 10GBASE-T as normal Port | NETGEAR Communities

Hello,Is it possible to use on GS728TXP the 10GBASE-T as normal port for example on a Notebook with 10GBASE-T ethernet port? The other 10GBASE-T port is...

S3300-28X (GS728TX) volatility | NETGEAR Communities

Need a certificate of volatility for the S3300-28X switch

GS728TX | NETGEAR Communities

We are planning to purchase 4 Netgear S3300-GS728TX and for our requirement, this model is just right considering the price.   Can somebody please...

GS728TS(B) | 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper/SFP+ and 4 Dedicated SFP+ Ports | NETGEAR Support

GS728TS(B) - 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper/SFP+ and 4 Dedicated SFP+ Ports

S3300-28X (GS728TX) | 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-28X (GS728TX) - 28-Port Gigabit Ethernet Stackable Smart Switch with 2 Copper 10G and 2 SFP+ 10G Ports

GS728TPS(B) | 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports | NETGEAR Support

GS728TPS(B) - 28-Port Gigabit Ethernet PoE Stackable Smart Switch with 24 PoE Ports, 2 Copper/SFP+ and 4 Dedicated SFP+ Ports

S3300-28X-PoE+ (GS728TXP) | 28-Port Gigabit Ethernet Stackable Smart Switch with 24 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports | NETGEAR Support

S3300-28X-PoE+ (GS728TXP) - 28-Port Gigabit Ethernet Stackable Smart Switch with 24 PoE+ Ports, 2 Copper 10G and 2 SFP+ 10G Ports

DC Montessori School Chandigarh - Case Study - NETGEAR Blog

DCM School Chandigarh has upgraded its network with NETGEAR Business, improving speed, reliability, and security for staff and students.

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Cuisine Schmidt IT Solutions - Simplify Business Processes

Schmidt cuisine enables their advisors to present new kitchen designs using tablets to provide its customers an excellent buying experience.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff