Search results for: GS108Tv2

GS108Tv2 and PoE - NETGEAR Support

The GS108Tv2 is a Powered Device (PD). It is not a Power Sourcing Equipment (PSE). In other words, the GS108Tv2 can be powered by power over ethernet (PoE), but it cannot provide PoE to other devices. Note that as well as being powered by PoE, the GS108Tv2 can also be powered using the included AC power adapter. For more information about PoE, see the NETGEAR Business PoE landing page. Last Updated:07/07/2025 | Article ID: 31431 Was this article helpful? Yes No

GS110TP & GS108Tv2 Firmware Version 5.4.2.13 - NETGEAR Support

Bug Fixes: Fixed the issue that if queue ID other than 0 (eg. queue 2) is selected when configuring minimum bandwidth for all ports (QoS > Advanced > Interface Queue Configuration), the minimum bandwidth will be set in queue 0 instead. Fixed the issue that SNMPv3 Engine ID is not unique. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Limi...

GS110TP / GS108Tv2 Firmware Version 5.4.2.30 - NETGEAR Support

Bug Fixes: Fixed the issue where the packets with destination MAC address of 01:80:c2:00:00:1c are still flooded out in a looped environment with STP enabled. Fixed the issue where the debugging URL of ‘devshell’ is accessible without authentication. Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Limitations: Combined MAC and IP ACL do no...

GS110TP / GS108Tv2 Firmware Version 5.4.2.35 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically change back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Combined MAC and IP ACL do not work with double VLAN tagged traffic. Download Link : https://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP_V5.4.2.35.zip Firmware Upgrade Instructions: To update your product’s...

GS110TP & GS108Tv2 Firmware Version 5.4.2.11 - NETGEAR Support

New Features: Added IPv6 management, IPv6 ACL, and IPv6 DiffServ support. Bug Fixes: Fixed the issue that SCCD (Smart Control Center Discovery) Utility cannot discover the device when its DHCP lease time has expired. Fixed the issue that VLAN does not change via RADIUS VLAN assignment unless bring the link down and up. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually...

GS110TPv2 / GS108Tv2 Firmware Version 5.4.2.36 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically change back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Combined MAC and IP ACL do not work with double VLAN tagged traffic. Download Link: https://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TPv2_V5.4.2.36.zip Firmware Upgrade Instructions: To update your product’...

GS110TP / GS108Tv2 Firmware Version 5.4.2.27 - NETGEAR Support

Bug Fixes: Fixed the issue where the switch web GUI can’t be accessed after 802.1X port authentication (Security > Port Authentication >Advanced > 802.1X Configuration) is enabled. Addresses the following security vulnerability issues published on CVE web site https://cve.mitre.org/: CVE-2013-4775 CVE-2016-7941 Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change ...

GS110TP & GS108Tv2 Firmware Version 5.4.2.22 - NETGEAR Support

Bug Fixes: Addresses the following security vulnerability issues published on CVE web site https://cve.mitre.org/: CVE-2011-3389, CVE-2009-3555, CVE-2013-2566, CVE-2015-2808 Note: For CVE-2011-3389 case, we need to disable TLSv1 protocol (under Security > Access > HTTPS> HTTPS Configuration). Since GS108Tv2 and GS110TP support only SSLv3 and TLSv1, any legacy client supporting only TLSv1 may not establish the SSL connection with the switch. So, the best way is to disable the TLSv1 mode and when ...

GS110TP & GS108Tv2 Firmware Version 5.4.2.19 - NETGEAR Support

Bug Fixes: Fixed the issue where the device view (System > Device View) fails to come up after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Limitations: Combined MAC and IP ACL do not work with double VLAN tagged traffic. Upgrade Instructions: Using the Dow...

GS110TP & GS108Tv2 Firmware Version 5.0.5.10 - NETGEAR Support

Please refer to the following documents before upgrading your firmware. It is very important to follow the upgrade process documented due to changes in firmware and boot code. SCC 1.1 release notes Upgrading GS108Tv2 and GS110TP from 5.0.1.x to 5.0.2.x Bug Fixes: Fixed the problem that some of ACL IP Extended rules disappear after rebooting the device. Fixed the problem that the switch sends user priority 6 to IP phone, but it displays 0 in LLDP-MED Network Policy (System > LLDP > Advanced > LLD...

GS110TP / GS108Tv2 Firmware Version 5.4.2.33 - NETGEAR Support

Bug Fixes: When the device receives hundreds of Pulse Audio multicasts (with destination IP of 224.0.0.56) per second, GUI access and Remote Diagnostic are blocked. Switch stops responding to a network monitor tool “PRGR Network Monitor” after being monitored for 2 to 3 weeks. Web interface of the switch hangs a couple of days later after configuring the SNTP Server Address with a DNS hostname. Switch won’t return serial number while NETGEAR Insight APP discovers it. Known Issues: Port PVID (Swi...

GS110TP & GS108Tv2 Firmware Version 5.4.2.25 - NETGEAR Support

Bug Fixes: Fixed the issue where the flash logs disappears after system reboot. Removed “Refresh” button from FLASH log page. Fixed the issue where the following optional TLV values of LLDP-MED are incorrect: Optional Mau Type Auto-negotiation advertised capability Maximum Frame size Asset ID Manufacturer name Firmware and Hardware revision Fixed the issue where the HTTPS/SSL certificate files failed to download to the device, if it containedCR/LF control characters. Known issues: Port PVID (Swi...

GS110TP / GS108Tv2 Firmware Version 5.4.2.29 - NETGEAR Support

Bug Fixes: Fixed the issue that when disabling port 9 from port configuration page (Switching > Ports > Port Configuration), port 10 gets disabled as well, contradicting to the Web GUI display. Fixed the issue where after deleting SNMP default communities – public and private (System > SNMP > SNMPv1/v2 > Community configuration), both will return after switch reboot. Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its...

GS110TP & GS108Tv2 Firmware Version 5.4.2.10 - NETGEAR Support

New Features: Added IPv6 management, IPv6 ACL, and IPv6 DiffServ support. Bug Fixes: Fixed the issue that SCCD (Smart Control Center Discovery) Utility cannot discover the device when its DHCP lease time has expired. Fixed the issue that VLAN does not change via RADIUS VLAN assignment unless bring the link down and up. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually...

GS110TP & GS108Tv2 Firmware Version 5.4.2.18 - NETGEAR Support

New Features Added option to flood LLDP packets Bug Fixes: Fixed the issue of switch not able to obtain IP address from some DHCP server. This particular DHCP server requires the source address from the DHCP discovery packet to be 0.0.0.0. Fixed the issue of stronger key (bigger than 2048 bits) can be downloaded to the switch. Fixed the issue where switch receives SNTP KISS OF DEATH from SNTP server, switch will no longer contact the SNTP server for time update. Removed high power mode option fr...

Do the NETGEAR GS108Tv2 and GS108Tv3 support PoE? - NETGEAR Support

The GS108Tv2 and GS108Tv3 are Powered Devices (PD), but not Power Sourcing Equipment (PSE). This means that they can draw power from an included AC power adapter or draw Power over Ethernet (PoE) from a connection to another device. However, they cannot provide PoE to other devices. For more information about PoE, see the NETGEAR Business PoE landing page. Last Updated:07/07/2025 | Article ID: 000060859 Was this article helpful? Yes No

MIBs for Smart switches - NETGEAR Support

The following models support complete standard MIBs: FS728Tv2 FS752TP GS108Tv2 GS110TP GS716Tv2 GS724Tv3 GS748Tv4 GS724/48TP GS7xxTS/TPS Additionally, you can find the MIBs for your switch on the http://support.netgear.com page for the switch in question. References: http://www.oidview.com/mibs/detail.html http://www.oidview.com/mibs/4526/md-4526-1.html Further MIB links: GSM73xxSv2 MIBs for Firmware Version 8.0.3.28 (GSM 7228PS, 7252PS, 7328Sv2, 7352Sv2, 7328FS) GSM7224v2, GSM7248v MIBs for Fir...

Security Advisory for Stored Cross Site Scripting on Some Smart Managed Pro Switches, PSV-2019-0191 - NETGEAR Support

Associated CVE IDs: None First published: 2021-12-20 NETGEAR has released fixes for a stored cross site scripting security vulnerability on the following product models: GS108Tv2, running firmware versions prior to 5.4.2.36 GS110TPv2, running firmware versions prior to 5.4.2.36 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, the...

Security Advisory for Post-Authentication Command Injection on Some Smart Managed Pro Switches, PSV-2021-0175 - NETGEAR Support

Associated CVE IDs: None First published: 2021-12-22 NETGEAR has released fixes for a post-authentication command injection security vulnerability on the following product models: GS108Tv2, running firmware versions prior to 5.4.2.36 GS110TPP, running firmware versions prior to 7.0.7.2 GS110TPv2, running firmware versions prior to 5.4.2.36. GS110TPv3, running firmware versions prior to 7.0.7.2 GS308T, running firmware versions prior to 1.0.3.2 GS310TP, running firmware versions prior to 1.0.3.2 ...

Security Advisory for CVE-2016-7941, PSV-2016-0150 - NETGEAR Support

NETGEAR is aware of a security issue on some models of ProSAFE Gigabit Smart Managed Switches that can let an attacker permanently modify certain system variables. This vulnerability occurs when a remote attacker uses SNMP to access stored XSS on the web management interface. The only system variables that can be accessed and modified because of this vulnerability are system name, system location, and system contact. No other settings are vulnerable, and no network traffic or credentials are exp...

GS108Tv2 Static Mac | NETGEAR Communities

Is it possible to force a port to allow traffic for a specific MAC address and not accept learned MAC addresses?

GS108Tv2 .. unreachable | NETGEAR Communities

Brought home a new GS108Tv2. Wired it up, was passing packets fine, hopped on my Juniper SRX210H (my DHCP server) and saw the IP assigned it by DHCP. Got...

GS108Tv2 GS110TP 2 x vlans @ 1 port | NETGEAR Communities

Dear Netgear users.Now I am tired of trying to get a simple vlan situation to work.I need help!On daily basis I administrate 100's of HP Procurve switches...

CLI support for GS108Tv2?! | NETGEAR Communities

Dear Community, I'm new on this forum but have been using Netgear stuff in a SoHo setting for some 15 years now. First a ReadyNAS RND4000NV, then a...

GS108TV2 hard reset | NETGEAR Communities

Hi! Is there a way to hard reset a Netgear GS108TV2?Thanks

gs108tv2 | NETGEAR Communities

Hat jemand hier eine netgear gs108tv2Und kann mir sagen wie die Einstellung aussehen müssen für den Betrieb an einer Fritzbox 7590Seit Blitz Einschlag in der...

GS108Tv2 won't take firmware | NETGEAR Communities

I have a GS108Tv2 switch that is currently at v5.0.0.8. I am trying to upgrade to the latest firmware (5.4.2.36) but the switch is not taking the file. It...

GS108Tv2/GS110TP - how to delete the default VLAN 2 and VLAN 3 (Voice and Auto-video)? | NETGEAR Communities

I am trying to add a GS108v2 and a GS110TP to my network but they both come with VLAN ID 2 (Voice VLAN) and VLAN ID 3 (Auto-video) already created. The Web...

GS108Tv2 Switch not discovered but IP shown in SmartControllCenter | NETGEAR Communities

Hi,Im totaly new with this switch stuff I wanted to update firmware for my Netgear GS108Tv2 Switchbut I cannot discover the switch with...

GS108Tv2 Switch not discovered but IP shown in SmartControllCenter | NETGEAR Communities

Hi,Im totaly new with this switch stuff I wanted to update firmware for my Netgear GS108Tv2 Switchbut I cannot discover the switch with...

GS108Tv2 management interface exposed on what VLAN? | NETGEAR Communities

On my GS108Tv2 I have changed the PVID of all ports to VLAN ID 101. However, in the VLAN Membership configuration I have all ports as untagged, except...

Can’t update firmware on GS108Tv2 (chat support agent stumped, too) | NETGEAR Communities

I have a GS108Tv2 with very outdated firmware. It is on Version 5.4.2.13, which goes back to at least 2014. I would like to get it up to 5.4.2.36, which is...

Generating TLS certs for GS108Tv2 from command-line | NETGEAR Communities

Hi, I was reading the thread GS108Tv2 HTTPS/TLS guide which unfortunately I wasn't able to reply to, but perhaps it's time for a new thread...

GS108Tv2 cannot disable port mirroring | NETGEAR Communities

I recently enabled port mirroring on this switch (after messing a lot with confusing error messages). Now I'd like to disable again, but I can't. I was able...

GS108Tv2 unreachable by hostname | NETGEAR Communities

Hello,I am trying to setup network monitoring in my homelab and discovered that ping, traceroute, snmpwalk and other such fun things, cannot find my GS108Tv2...

GS108Tv2 Switch Does Not Have Internet Access | NETGEAR Communities

I am unable to connect to the internet from any computer that has an ethernet connection to the switch I am not able to access the admin portal from the...

GS108Tv2 - does it support trunk port? | NETGEAR Communities

As subject - does it support Trunk port?If not, which Netgear model support it? For home lab. thanks

GS108Tv2 - no firmware tab in management website | NETGEAR Communities

I have a GS108Tv2 and i'd like to upgrade the firmware. I only have linux machines, so the Smart Control Center does not work. I thought i could upgrade the...

Looking for mib for GS108Tv2 and GS724TV4 | NETGEAR Communities

Hey, I am looking for mib files for GS108Tv2 and GS724TV4. Cheers 

GS108Tv2 SNTP timeout | NETGEAR Communities

My GS108Tv2 will not connect to any SNTP servers to sync the device's time.  I have tried many different dns names for North America.  All of the...

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.