Search results for: XS724EMv2

XS724EMv2 Firmware Version 1.0.0.14 - NETGEAR Support

Enhancements: Increase the maximum number of mirroring source ports from 7 to 27. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Download Link: https://www.downloads.netgear.com/files/GDC/XS724EM/XS724EMv2_V1.0.0.14.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://ww...

XS724EMv2 Firmware Version 1.0.0.4 - NETGEAR Support

New Features and Enhancements: This is the initial release of this firmware. Download Link: https://www.downloads.netgear.com/files/GDC/XS724EM/XS724EMv2_V1.0.0.4.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page. Last Updated:09/25/2025 | Article ID: 000068373 ...

XS724EMv2 Firmware Version 1.0.0.16 - NETGEAR Support

Release Date: August 28, 2026 Bug Fixes: Fixes the issue where the switch has an LACP, Link Aggregation Control Protocol, interoperability problem. Download Link: https://www.downloads.netgear.com/files/GDC/XS724EM/XS724EMv2_V1.0.0.16.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation butt...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

XS724EM Firmware Version 1.0.0.6 - NETGEAR Support

Issues solved: LACP cannot work with device running with Windows server 2016 operating system Possibility of unauthenticated web access through admin cookie leak Weak cryptography of the admin password that is stored in the admin cookie Device may reboot when under attack by certain malicious packets Known Issues and Limitations: Saved configuration file from firmware v1.0.0.5 and from newer firmware is not compatible with version v1.0.0.1 and vice versa. Upgrade Procedure: Below are the steps t...

XS724EM Firmware Version 1.0.2.7 - NETGEAR Support

Enhancements: LLDP packets are now dropped instead of being forwarded. Bug Fixes: Fixes the issue where LACP doesn’t work when both SFP+ ports are configured as a trunk. Known Issues: After you update the firmware to version 1.0.0.8 or a later version, the Plus Utility does not work with a version earlier than version 2.7.2. Workaround: Install the latest version of the Plus Utility. Visit http://www.netgear.com/support/product/PCU to download the latest version. Download Link: https://www.downl...

XS724EM Firmware Version 1.0.1.3 - NETGEAR Support

Security Fixes: Various security fixes and enhancements. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Known Issues: After XS724EM is upgraded to firmware version V1.0.0.8 or later, it does not work with Plus Utility version prior to V2.7.2. Workaround: Download the latest Plus Utility from http://www.netgear.com/support/product/PCU Download Link : https://www.downloads.netgear.com/files/GDC/XS724EM/XS724EM_V1.0.1.3.zip Firmware Update Instruc...

XS724EM Firmware Version 1.0.0.5 - NETGEAR Support

New Features and Enhancements: Removed the restriction of maximum of 10G bandwidth for broadcast and multicast traffics. Extended maximum LAG groups from 8 to 12. Issues solved: Connection may fail after swapping between copper and fiber several times WARNING: Upgrading from v1.0.0.1 to v1.0.0.5 will reset the configurations back to factory default values due to modification to the maximum LAG group number. Known Issues and Limitations: Saved configuration file from v1.0.0.5 firmware is not comp...

XS724EM Firmware Version 1.0.1.1 - NETGEAR Support

Note: If updating from firmware version 1.0.0.6 or earlier, then this update will include a chipset driver update that takes 8-10 minutes. Do not interrupt the update process during this time. The switch will reboot automatically after the update completes. After downloading FW v1.0.1.1 to the switch, regardless of the current password, the switch’s password resets to the default. This helps address bug #2 in the Bug Fixes section. New Features and Modifications: The default admin password must ...

XS724EM Firmware Version 1.0.2.5 - NETGEAR Support

Enhancements: A new CPU version is supported. A better load-sharing algorithm for port members in a link aggregation group (LAG) is supported. A new physical layer driver is supported to improve interoperability. IGMP snooping is now disabled by default. Known Issues: After you update the firmware to version 1.0.0.8 or a later version, the Plus Utility does not work with a version earlier than version 2.7.2. Workaround: Install the latest version of the Plus Utility. Visit http://www.netgear.com...

XS724EM Firmware Version 1.0.2.8 - NETGEAR Support

Bug Fixes: Fixes the issue where a switch becomes inaccessible. Known Issues: After you update the firmware to version 1.0.0.8 or a later version, the Plus Utility is not compatible with a firmware version earlier than version 2.7.2. http://www.netgear.com/support/product/PCU. Workaround: Install the latest version of the Plus Utility. To download the latest version, visit Download Link: https://www.downloads.netgear.com/files/GDC/XS724EM/XS724EM_V1.0.2.8.zip Firmware Update Instructions: Warnin...

XS724EM Firmware Version 1.0.2.0 - NETGEAR Support

Enhancements: Add a control option to disable or enable file transfer via TFTP (Trivial File Transfer Protocol), under System > Management > Discovery and Management). Default is Disable. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/ Known Issues: After XS724EM is upgraded to firmware version V1.0.0.8 or later, it does not work with Plus Utility version prior to V2.7.2. Workaround: Download the l...

XS724EM Firmware Version 1.0.0.8 - NETGEAR Support

This firmware update includes a chipset driver update. The total upgrade process will take about 8 to 10 minutes. The switch will reboot automatically after the upgrade process is completed. Bug Fixes: SFP+ ports cannot link up with Intel X552 10GbE SFP+ Ethernet controller Known Issues: After XS724EM is upgraded to firmware version V1.0.0.8, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgrade P...

XS724EM Firmware Version 1.0.0.1 - NETGEAR Support

New Features and Enhancements: Initial release Known Issues and Limitations: Cable test does not work properly on multi-gig ports (port 9 and port 10) when no cable is connected or if the length is less than 5 meters. Download Link : http://www.downloads.netgear.com/files/GDC/XS724EM/XS724EM_V1.0.0.1.zip Last Updated:07/07/2025 | Article ID: 000053243 Was this article helpful? Yes No

How do I configure rate limits on my NETGEAR XS512EM or XS724EM switch? - NETGEAR Support

Port-based rate limiting allows you to limit the speed at which network traffic is sent or received by a device that is connected to a port on your switch. Unlike 802.1p Quality of Service (QoS), port-based rate limiting does not prioritize information based on type. Rate limiting simply means that the switch slows traffic on a port to keep it from exceeding the limit that you set. If you set the rate limit on a port too low, you might see degraded video stream quality, sluggish response times, ...

ProSAFE Plus Configuration Utility 2.7.2 - NETGEAR Support

New Features and Enhancements: Support configurable option to change port speed and QoS for XS512EM and XS724EM modes. Uses new and more secured encryption algorithm to communicate with switch. Download Link Note: If you do not see your switch in the network list on Plus Configuration Utility, click the REFRESH button or close and launch the ProSAFE Plus Utility again. You may also need to configure your computer’s security software to allow broadcast packets to pass through (to/from) your PC’s ...

Security Advisory for Authentication Bypass on Some Switches, PSV-2018-0219 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for an authentication bypass security vulnerability on the following product models: GS810EMX, running firmware versions prior to 1.0.0.5 XS512EM, running firmware versions prior to 1.0.0.6 XS724EM, running firmware versions prior to 1.0.0.6 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the ...

Security Advisory for Denial of Service on Some Switches, PSV-2018-0222 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a denial of service security vulnerability on the following product models: GS110EMX, running firmware versions prior to 1.0.0.9 GS810EMX, running firmware versions prior to 1.0.0.5 XS512EM, running firmware versions prior to 1.0.0.6 XS724EM, running firmware versions prior to 1.0.0.6 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR...

XS724EMv2: UL listed / certified? | NETGEAR Communities

Hi. I'm searching for successor >=24 Port 10G-BaseT L2/L2+ Ethernet Switch as the current model XS728T is End-of-life. Netgear offers the XS724EM, which...

XS724EM just stopped booting/turning on | NETGEAR Communities

Short version is that came in to work and no connections. Found the 10GB switch with no port lights on and no fans running. The tiny power light blinks and...

Netgear XS724EM - Round Robin Link Aggregation | NETGEAR Communities

I am planning to connect Asustor NAS link to the Netgear switich XS724EM. Could anyone tell me if the XS724EM switich can support Round- Robin mode...

XS724EM Restore Configuration Settings failure | NETGEAR Communities

I saved the config from our XS724EM switch, and updated the firmware to 1.0.2.5.  Upon reboot, the switch config returned to factory default.  I've...

XS724EM firmware 1.0.2.5 has NO-link issue with Cisco c300/c350 SMB switches at 1G link speed. | NETGEAR Communities

XS724EM firmware 1.0.2.5 is NOT fully compatible with Cisco small medium business 1G switches.  For example, Cisco C300 SMB Series, C350 SMB Series,...

Very very Noisy Switch - XS724EM | NETGEAR Communities

Recently bought a new Switch to our office to be able to run 10Gbit. This one:XS724EM - 24-Port 10-Gigabit/Multi-Gigabit Ethernet Smart Managed Plus...

XS724EM: Questions about fans/cooling | NETGEAR Communities

I recently purchased an XS724EM to support the increasing number of multi-gig and 10G devices we have in our home. It's replacing a D-Link 1050-28X with 4x...

XS724EM - Black/Gray Front Panel | NETGEAR Communities

I am evaluating a XS724EM 24 Port 10gb Switch from a local partner. I received the Switch today which was in open box condition and was surprised to see...

How to login to XS724EM - 24-Port 10-Gigabit/Multi-Gigabit Ethernet Smart through http/https query | NETGEAR Communities

We want to use this switch. So, for automation, it needs to configure the port(basically port negotiation). Could you please tell me how we can provide...

XS724EM SFP+ Uplink Ports Behave as Normal Ports | NETGEAR Communities

Can anyone confirm if the shared SFP+ ports on the XS724EM (and simliar) behave as normal ports? ie. Can be configured with link aggregation when connected...

XS724EM/M4200-10MG-POE+ & MS510TXPP - Can't Force 1GB on MGig Ports for incompatible MR53E MGig AP | NETGEAR Communities

 We own 3 Netgear MGig switches XS724EM / M4200-10MG-POE+ and MS510TXPP with any of these Switches if we attempt to plug in a Cisco Meraki MR53E AP...

Switch no longer working after being unplugged and then plugged back in | NETGEAR Communities

My xs724em quit working after I unplugged the power strip it was connected to then immediately plugged it back in. All status lights have are off on all...

LAG with SFP+ not working | NETGEAR Communities

I have 2 switches (XS512EM and XS724EM) each with 2 AXM761 SFP+ modules and would like to connect them via LAG. The LAG works with copper cables, it does not...

Letter of Volatility | NETGEAR Communities

Hello, I need a statement of volatility for 2 of your switches I have in my system. Could somebody provide these for the XS724EM and GS418TPP models...

Introducing the NETGEAR XS724EMv2 Switch: Smarter, Faster, and Built for the Future - NETGEAR Blog

NETGEAR maintains its leadership in multi-gigabit switching technology with the introduction of the XS724EMv2 24-Port 10G/Multi-Gigabit Easy Smart Managed Switch.

Business IT Networking Articles - NETGEAR Blog

Discover how to get the most out of your business IT network with the latest technology and best practices. Learn More.

Business Articles - NETGEAR Blog

Business: Optimize your business with Netgear's top-rated technology solutions. Stay connected and stay productive with our advanced systems.