Search results for: XS712Tv2

XS712Tv2 Firmware Version 6.6.3.2 - NETGEAR Support

New Features and Enhancements: Initial Release Known Issues: Number of configured IPv6 routes is displayed incorrectly [Workaround]: Please count the listed static routes in the table. Combo port could failed to linkup with Intel NIC X520 and X710 after multiple unplug/re-plug. [Workaround]: Reboot the device. Notes: The released zip contains switch firmware (xs7xxt-v6.6.3.2.stk) and MIB files. Please unzip the file to extract the switch image for firmware upgrade. Switch FAN will run at maximum...

XS708T / XS712Tv2 / XS716T Firmware Version 6.6.3.5 - NETGEAR Support

Bug Fixes: When an SFP+ port is connected at 10 Gbps, it might not come up after a system reboot. Known issues: The switch incorrectly displays the number of configured IPv6 routes. [Workaround]: Please count the listed static routes in the table Download Link : http://www.downloads.netgear.com/files/GDC/XS708T/XS708T_XS712Tv2_XS716T_V6.6.3.5.zip Firmware Update Instructions (For XS708T/XS716T FW upgrades from v6.6.1.7 to v6.6.3.5): Make sure the firmware version of your XS708T/XS716T is v6.6.1....

XS708T / XS712Tv2 / XS716T Firmware Version 6.6.3.3 - NETGEAR Support

Bug Fixes: Combo port fails to linkup with Intel NIC X520 and X710 after multiple unplug/re-plug on XS712Tv2 New Features and Enhancements: Added GUI option to enable/disable Admin Mode of Netgear Smart Control Center (SCC) Utility Added LAG Hash options in LAG configuration GUI page string modification. ‘File Upload’ changes into ‘File Export’. Added Flow control options with ‘Asymmetic’ and ‘Symmtetic’. Known issues: Number of configured IPv6 routes is displayed incorrectly. [Workaround]: Plea...

XS708T / XS712Tv2 / XS716T Firmware Version 7.0.0.20 - NETGEAR Support

New Features and Enhancements: In addition to English, the local browser interface now supports German (Deutsch) and Japanese (日本語). Default “password” must be changed when you log into the switch for the first time. To configure SNMPv3, Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. Changed the default setting of the Smart Control Center (SCC) management from enabled to disabled. Note: SCC Utility can still discover ...

XS708T / XS712Tv2 / XS716T Firmware Version 7.0.0.24 - NETGEAR Support

Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes the issue where the switch is not able to obtain an IP address from the DHCP server when the DHCP Offer packet contains 2 gateway addresses. Known issues: The stored password format of v7.0.0.9 and v7.0.0.10 is incompatible with v7.0.0.24 if the length is greater than 15 characters. Workaround: Please change the password to the defaul...

NMS300 Software Release 1.6.0.11 - NETGEAR Support

This release notes contains features and known issues for Netgear NMS300 Network Management Software release 1.6.0.11 Enhancement on 1.6.0.11: Add supported models: XS712Tv2 MS510TX MS510TXPP Smart M4300 (M4300-12X12F/M4300-24X) NMS300 Known issues and limitations Some older managed switches do not support all features available in NMS300. Short Message Service (SMS) functionality is only working in P.R China, all of other countries or regions don’t support it. This release doesn’t support uploa...

XS712T Firmware Version 6.1.0.12 - NETGEAR Support

XS712T is a brand new 10 Gigabit Ethernet "ProSAFE Smart Switch". It supports 12 100/1000/10000 Mbps RJ45 (10GBased-T) ports with two combo ports supporting 1G or 10 Gigabit SFP+ fiber. XS712T support the latest Smart Control Center, please use SCC version 1.1.3.2 for switch discovery, basic configuration and FW upgrades. Known issues None. Limitations Packets with frame size greater than 64 bytes and with Ether Type set to "None", counters get incremented on 1 Gig ports and counters do not get ...

XS712T Firmware Version 6.1.0.34 - NETGEAR Support

Fixed Issues and Modification ,Fixed the issue where device view does not work after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer. ,Fixed the issue when fan #2 is stopped, instead of turning on the FAN failure LED, power LED changes from green to yellow ,Fixed the issue where unrealistic high temperature (255C) is displayed through debugging telnet session ,Messages of “Error 1 occurred reading fan” are observed ,Warning messages are observed when creating VLAN...

XS712T Firmware Version 6.1.0.36 - NETGEAR Support

Fixed Issues: Multicast packet with destination MAC address of 01:80:c2:00:00:1c and Ethernet type of 0x88CC causes loop in properly converged STP topology. Debugging URL of ‘devshell’ is accessible without authentication. Continuous "NIM: out of bounds usp used U=1, S=0 P=13 - port too large" errors are logged while loading the device view on WEB GUI. Limitations Packet counter of 10G port does get incremented if packets with frame size greater than 64 bytes and Ether-Type set to “none”. This s...

XS712T Fimrware Version 6.1.0.33 - NETGEAR Support

Fixed Issues & Modification Unable to save or backup the system configuration sometimes after reboot Note : This issue is with 6.1.0.30 only. But, the configuration will still be lost after upgrading from 6.1.0.30 to 6.1.0.33. So, please reconfigure the switch after booting with 6.1.0.33 SNMP TRAP always shows its agent IP as 192.168.0.239 After an IGMP VLAN entry is deleted, related configuration is not removed completely Limitations Packet counter of 10G port does get incremented if packets wi...

What NETGEAR modules can I use in the ProSAFE 10-Gigabit Ethernet Smart Managed Switches (Models XS708T, XS712T, XS716T, XS728T, and XS748T)? - NETGEAR Support

The following NETGEAR modules are supported: AGM731F AGM732F AGM734 The following NETGEAR SFP+ modules are supported: AXM761 AXM762 AXM763 (XS708T, XS712T, XS716T only) AXM764 The following NETGEAR SFP+ direct-attach cables are supported: AXC761 AXC763 Last Updated:07/07/2025 | Article ID: 30529 Was this article helpful? Yes No

Which smart switches support 10G SFP+ slots and which optical modules can you install in an SFP+ slot? - NETGEAR Support

The GS728TXS, GS752TXS and XS712T smart switches support 10G small form-factor pluggable (SFP+) slots in which you can install optical modules: GS728TXS and GS752TXS. Support four SFP+ slots, two of which you can configure for either a 10G uplink or 10G stacking. XS712T. Supports two SFP+ slots that function as combo ports in which you can install10G Fiber or copper optical modules. You can use the SFP+ slots on the GS728TXS, GS752TXS, and XS712T to install either Gigabit SFP optical modules or ...

Getting started with the XS728T 10-Gigabit Smart Managed Switch - NETGEAR Support

The XS728T is a 28-port 10-Gigabit Ethernet Smart Managed Switch. It supports 24 copper 10GBased-T ports and four dedicated 1G/10G fiber ports. Frequently Asked Questions 1. What are the major enhancements for the XS728T compared with the XS712T? More 10G copper ports and fiber ports One USB port for firmware upgrade and configuration backup IPv6 Static Routing New GUI style that supports the most popular WEB Browsers (see Question 11 below for a complete list) 2. What cables can be used with th...

NMS300 Software Release 1.1.0.13 - NETGEAR Support

Release date: June 14th 2013 This release notes contains features and known issues for NETGEAR ProSAFE NMS 300 Network Management Software release 1.1.0.13. Key features available in this software are the following: Support for NETGEAR Managed and Smart switches Support for discovery and node status monitoring of third-party devices NOTE: Support for NETGEAR Wireless, Security & Storage devices will be available in a future release of NMS300. Following NETGEAR Managed Switches are currently supp...

NMS300 Software Release 1.2.0.16 - NETGEAR Support

Release date: September 16th 2013 This release notes contains features and known issues for NETGEAR ProSAFE NMS 300 Network Management Software release 1.2.0.16. Key features available in this software are the following: Support for NETGEAR ProSAFE Wireless products (see models number in below list). Support for NETGEAR ProSAFE Firewall FVS318G. NOTE: Support for NETGEAR Storage & remaining Security devices will be available in a future release of NMS300. Following NETGEAR ProSAFE Wireless produ...

Security Advisory for Authentication Bypass and Remote Command Execution on Some Smart and Managed Switches, PSV-2017-0857 - NETGEAR Support

NETGEAR is aware of a security issue that can allow an attacker to access the debugging URL of some models of Smart and Managed Switches without first authenticating. After accessing the debugging URL, the attacker can then execute commands on the switch, such as resetting or restarting the switch. This attack can only be executed remotely if the switch itself can be accessed remotely; for most users, a firewall will block access from outside the local network. This vulnerability affects the fol...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.13 - NETGEAR Support

Bug Fixes: Fixed the issue that if queue ID other than 0 (eg. queue 2) is selected when configuring minimum bandwidth for all ports (QoS > Advanced > Interface Queue Configuration), the minimum bandwidth will be set in queue 0 instead. Fixed the issue that SNMPv3 Engine ID is not unique. Fixed the issue that the switch would lose synchronization with 802.1AS master clock occasionally when EAV is enabled. Fixed the issue that port 15 and 16 of GS724Tv3 would not link up after a reboot if the spee...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.1.10 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. New Features and Enhancements: IPv6 Management. IPv6 ACL. IPv6 QoS. Known issues: None. Notes for IPv6 ACL and QoS: Due to unavailability of hardware resources on GS716T and GS724T, the following are the restrictions for IPv6 ACL and QoS: A rule with all supported qualifiers cannot be bound on the interface. If any ACL has selected qualifier as...

GS716Tv2 / GS724Tv3 Firmware Version 5.4.2.30 - NETGEAR Support

Bug Fixes: Fixed the issue that after deleting SNMP default communities – public and private (System > SNMP > SNMPv1/v2 > Community configuration), both will return after switch reboot. Fixed the issue where the packets with destination MAC address of 01:80:c2:00:00:1c are still flooded out in a looped environment with STP enabled. Fixed the issue where the debugging URL of ‘devshell’ is accessible without authentication. Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configura...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.19 - NETGEAR Support

Bug Fixes: Fixed the issue where the device view (System > Device View) fails to come up after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Limitations: Combined MAC and IP ACL do not work with double VLAN tagged traffic. Using the Download Link below, down...

XS712Tv2 factory resets itself | NETGEAR Communities

Bought a used XS712Tv2 on eBay back in July. I had a lot of trouble with setting it up initially. Once I got it working I upgraded the firmware to latest and...

XS712Tv2 switch - L3 routing between two separate networks? | NETGEAR Communities

Hi,There are two different entities that however trust each other to a certain degree.Each entity has it's own LAN and switches and gateway and internet...

inefficient Setup Layer 2+3 LAG with XS712Tv2 and Qnap NAS | NETGEAR Communities

Hi togetherwanted to have better speeds when many users accessing files on a qnap NAS ( TVS-872XT + QXG-10G2T-107 ).So I activated Link...

XS712Tv2 can not send a jumbo frame via LAG connection | NETGEAR Communities

Hello!!I am testing a jumbo frame from a Linux PC to another Linux PC via XS712Tv2.$ ping -M do -s 1474 -c 10 $destinationpc        ...

Switch xs712t v2 and Intel x710 | NETGEAR Communities

Hello,can I connect a Intel x710-da2 card in my switch Netgear XS712T-V2?

Can a 5 GbE network expansion card be used with a 10 Gigabit XS712Tv2? | NETGEAR Communities

Hi, I would like to connect a QNA-UC5G1T 5 GBE card in a TS-873 to a 10 Gigabit Netgear XS712Tv2 switch. However, I am afraid that the XS712Tv2 does not...

Two XS712Tv2 switches need configuration for contineous connectivity if any one fails | NETGEAR Communities

We want an on site engineer to install and configure the managed swithes with port stacking.

Netgear XS712T v2 socket xg12 "detach" | NETGEAR Communities

I hope someone on this discussion board can help. I have a Netgear Prosafe XS712T v2 network switch that supports a mixture of 10Gb/s devices connected...

Setting up a new XS712Tv2 switch for first time | NETGEAR Communities

I have the XS712Tv2 managed switch and all the setup documentation referes to having a Windows PC. The various utilities that can be donwloaded are also for...

xs712t vs xs712t-v2 | NETGEAR Communities

Hi.I run XS712t and i want to buy another one for my video editing facility. I see on Netgear site there is now an updated version of xs712 so i would...

Migrating from xs712Tv2 to xs712t | NETGEAR Communities

I am Migrating from a  xs712T to a  xs712Tv2, is there any way possible to import the config file from the old swith to the new (import from XS712T...

New Affordable 12 Port Managed 10gbase-t Network Switch - NETGEAR Model XS712Tv2 | NETGEAR Communities

See the full story about the 10-Gigabit Network Switch XS712Tv2 on the NETGEAR Community Homepage.

XS708T and XS716T discontinued ? | NETGEAR Communities

Hello - what on earth is going on ?  It appears that Netgear has discontinued the XS708T and XS716T, leaving the XS712Tv2 the only "small" 10G...

XS716T ports and spec limitations | NETGEAR Communities

just read the data sheet: https://www.netgear.com/images/datasheet/switches/SmartSwitches/XS708T_XS712Tv2_XS716T_XS728T_XS748T_DS.pdfIn order to aviod making...

Firmware Update how to | NETGEAR Communities

Hi there, how can i update the firmware of the XS712Tv2? I did not find any solution in the documenation nor anywhere else.The switches have software...

Compatibility and Warranty of XS712T-200NES | NETGEAR Communities

Hi all,   I would like to purchase a XS712T-200NES from amazon uk. Is the XS712T-200NES same as the XS712Tv2? As I am from Malaysia, may I know how do I...

Simple dB question regarding M4300 8x8f vs XS812Tv2 | NETGEAR Communities

Hi all,    I want to upgrade my home lab to 10G. I am considering either buying either the M4300 8x8f or the XS812Tv2 switch. The XS712 at...

Fans running full speed after 7.0.0.11 upgrade | NETGEAR Communities

Hi,I just bought a XS712v2 that came with firmware 6.6.3.3. I updated the firmware using the HTTP procedure as I have no PC with Windows.From what I have...

Stacking Prosafe XS712T - Is it possible? | NETGEAR Communities

Can you stack the XS712T smartswitch? Thanks!

Upgrading the firmware for Prosafe XS712T | NETGEAR Communities

I am using SmartControlCenter to upgrade the firmare for subject switch. Which archive does one use to do so? There are 3 possible files: the downloaded zip,...

Networking solution ensures Hawk-Eye Innovations never misses the mark - NETGEAR Blog

Discover how NETGEAR networking powers Hawk-Eye’s real-time precision and reliability across global sporting events.