Search results for: JFS524

ProSAFE Plus Configuration Utility v2.2.26 - NETGEAR Support

New Features and Enhancement: None. Bug Fixes: Fix the problem of buttons overlap when using Deutsch & François language. Note to Windows 8 users: One of the components installed as part of the Plus Utility program is WinPCap. WinPCap is not supported on Windows 8. If your computer uses Windows 8, a WinPCap error message will display during installation. WinPCap is used to manage FS116E and JFS524E switches only. If you are not managing FS116E or JFS524E switches, ignore the message. If you are ...

ProSAFE Plus Configuration Utility v2.2.25 - NETGEAR Support

New Features and Enhancement: None. Bug Fixes: Fix the problem of not able to discover GS105E if GS105E is in boot-loader mode. Note to Windows 8 users: One of the components installed as part of the Plus Utility program is WinPCap. WinPCap is not supported on Windows 8. If your computer uses Windows 8, a WinPCap error message will display during installation. WinPCap is used to manage FS116E and JFS524E switches only. If you are not managing FS116E or JFS524E switches, ignore the message. If yo...

Unable to detect the ProSAFE plus switch using the UM+ utility - NETGEAR Support

ProSAFE Plus switches are configured using the UM+ utility installed on a MS Windows based computer. When the UM+ utility starts, it will detect and display the ProSAFE Plus switches in the network. If the UM+ utility cannot detect the ProSAFE Plus switch, Make sure there is network connectivity from the computer to the ProSAFE Plus switch. Some firewall software installed on the computer may prevent the UM+ utility to detect the ProSAFE Plus switch. Try disabling the firewall software. Some sof...

Security Advisory for Insecure SOAP Access in ProSAFE Plus Configuration Utility, PSV-2017-1997 - NETGEAR Support

NETGEAR is aware of a security issue in the ProSAFE Plus Configuration Utility that allows an unauthenticated user to change settings on NETGEAR switches that the ProSAFE Plus Utility can configure. This insecure Simple Object Access Protocol (SOAP) access vulnerability can only be exploited from a computer on the local network and must be exploited while the utility is running. This vulnerability is present in the following utility versions: ProSAFE Plus Configuration Utility versions earlier t...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

JGS524PE / JGS524Ev2 Firmware Version 2.6.0.50 - NETGEAR Support

Bug Fixes: Fixes the issue where you cannot access the device UI when it connects with OpenVPN. Download link: https://www.downloads.netgear.com/files/GDC/JGS524EV2/JGS524PE_JGS524Ev2_V2.6.0.50.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page. Last Updated:07/0...

JGS524PE Firmware Version 2.0.0.31 - NETGEAR Support

Bug Fix: Fixes the problem that control packets from Plus Utility flood across VLANs. Fixes the problem that file transfer fails when FTP is in active mode. Download and unzip the new file from the NETGEAR Download Center by clicking the below URL. The file name after unzipping is JGS524PE_V2.0.0.31.bin. Download Link: http://downloadcenter.netgear.com/en/product/JGS524PE Last Updated:10/17/2025 | Article ID: 24501 Was this article helpful? Yes No

JGS524PE / JGS524Ev2 Firmware Version 2.6.0.24 - NETGEAR Support

New features and modifications:: Revised some wordings on the web GUI for German language setting. After JGS524PE and JGS524Ev2 are upgraded to FW version V2.6.0.21 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgrade Procedure Download the new firmware 2.6.0.24 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to...

JGS524PE / JGS524Ev2 Firmware Version 2.6.0.21 - NETGEAR Support

New feature and modifications: In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese (日本語). Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher). Implemented new access control. After JGS524PE and JGS524Ev2 are upgraded to FW version V2.6.0.21 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgr...

JGS524PE / JGS524Ev2 Firmware Version 2.6.0.22 - NETGEAR Support

Bug Fixes: Fixed the issue that fan failure LED may light up falsely for certain units. After JGS524PE and JGS524Ev2 are upgraded to FW version V2.6.0.21 or higher, it cannot work with Plus Utility version prior to V2.7.2. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU Upgrade Procedure Download the new firmware 2.6.0.22 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to get the sw...

JGS524E Firmware Version 1.00.20 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.24 or newer before upgrading the JGS524E firmware. Older versions of the Plus Utility do not support the password encryption required by V1.00.19 firmware. New Features and Enhancement: Add static mRouter port support. Bug Fixes: Change the default setting of loop detection from enable to disable. Known Issues: None Limitations: None Installation Instructions Download the new firmware to a convenient p...

JGS524E Firmware Version 1.00.15 - NETGEAR Support

New Features and Enhancement: 1. Added static LAG feature Known Issues: None Limitations: None Installation Instructions Download the new firmware to a convenient place on your local system and extract the ZIP file (e.g., C:\downloads\). Start ProSAFE Plus Configuration Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing. The ProSAFE Plus Utility will scan and detect ProSAFE Plus switches on your network. Select the switch to upgrade ...

JGS524PE/JGS524Ev2 Firmware Version 2.0.1.17 - NETGEAR Support

New Features & Enhancements: Changed default setting of flow control from enable to disable. Added online help support and registration page to WEB GUI. Bug fixes: Fixed the problem of not able to login to the switch after the password is changed to "metr" or "andre123" using Plus Utility. Using the Download Link below, download the new firmware to a convenient place such as your desktop. Unzip the file from the zip folder and the filename after extracting is JGS524PE_JGS524Ev2_V2.0.1.17.bin Dow...

JGS524E Firmware Version 1.00.16 - NETGEAR Support

New Features and Enhancement: None Bug Fixes: Fix the problem with port-based VLAN where uplink ports (VLAN Group = all) stops forwarding packet to other VLAN members after a power cycle. Known Issues: None Limitations: None Installation Instructions Download the new firmware to a convenient place on your local system and extract the ZIP file (e.g., C:\downloads\). Start ProSAFE Plus Configuration Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, bef...

JGS524PE / JGS524Ev2 Firmware Version 2.6.0.35 - NETGEAR Support

New Features and Modifications: Added a new Port Description column to Port Status Table in the local browser interface. In the local browser interface, change page title from NETGEAR ProSAFE Plus Switch to NETGEAR JGS516PE and NETGEAR GS116Ev2. In the help section of the local browser interface, links to Documentation and Support will now open up in the same language as selected for the local browser interface. Security Fixes: PSV-2018-0542 PSV-2018-0612 Bug Fixes: In the help section of the lo...

JGS524E Firmware Version 1.00.19 - NETGEAR Support

Warning: Please make sure the version of the ProSAFE Plus Utility installed on your PC is v2.2.24 or newer before upgrading the JGS524E firmware. Older versions of the Plus Utility do not support the password encryption required by V1.00.19 firmware. New Features and Enhancement: Make loop detection configurable. Allow the forwarding of ICMP PING packet with size greater than 512 bytes. Add password encryption Bug Fixes: Change the default setting of loop detection from enable to disable. Known ...

JGS524PE / JGS524Ev2 Firmware Version 2.0.1.40 - NETGEAR Support

New Features & Enhancements: Added a Switch Management Mode on the Web GUI to allow user to choose to manage the switch from Web browser only or from both Web browser and Plus Utility. Made power saving feature configurable. Implemented more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher). Modifications: Fixed the vulnerabilities of cross-site Scripting (XSS) and cross-site request forgery (CSRF) attacks. Fixed the issue where the pop-up alert "The produc...

JGS524PE/JGS524Ev2 Firmware Version 2.0.1.26 - NETGEAR Support

Bug fixes: Fixed the problem that switch configuration can be obtained through HTTP without login to the device. Fixed the problem that TCP connection cannot be established when TCP header Push (PSH) flag is set (PSH bit = 1) with TCP SYN or FIN flag is also set. Using the Download Link below, download the new firmware to a convenient place such as your desktop. Unzip the file from the zip folder and the filename after extracting is JGS524PE_JGS524Ev2_V2.0.1.26.bin Download Link: http://www.down...

JGS524Ev2 Firmware Version 2.0.0.31 - NETGEAR Support

Bug Fix: Fixes the problem that control packets from Plus Utility flood across VLANs. Fixes the problem that file transfer fails when FTP is in active mode. Download and unzip the new file from the NETGEAR Download Center by clicking the below URL. The file name after unzipping is JGS524Ev2_V2.0.0.31.bin. Download Link: http://downloadcenter.netgear.com/en/product/JGS524Ev2 Last Updated:10/17/2025 | Article ID: 24500 Was this article helpful? Yes No

JGS524E Firmware Version 1.00.11 - NETGEAR Support

New Features and Enhancement: Add product registration feature. Modifications / Fixes: 1. Fix the issue that IPv6 multicast packets from one VLAN are flooded to other VLANs. Known Issues: None Limitations: None Installation Instructions Download the new firmware to a convenient place on your local system and extract the ZIP file (e.g., C:\downloads\). Start ProSAFE Plus Configuration Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing...

JFS524 | NETGEAR Communities

Hello, I'm looking for the 3D CAD model for JFS524 (24 port fast ethernet switch). Please provide me at the earliest. Thank you,Arul

All lights off on Netgear JFS524 Model 23 24 Port 10/100 Fast Ethernet Unmanaged Switch. | NETGEAR Communities

I have a Netgear JFS524 Model 23 24 Port 10/100 Fast Ethernet Unmanaged Switch. It had been in storage for a while.Today when I tried to use it, it did not...

JFS524E cannot access neither reset to factory default | NETGEAR Communities

Hi,  I am trying to set up a ProSafe JFS524E (unmanaged plus) switch.I don't have a dhcp server on my network, so I have connected my PC directly to the...

Request Letter of Volatility GS748T amd JFS524 | NETGEAR Communities

Hello I am requesting the Letter of Volatility of the two Netgear Switches I have mentioned in the titleGS748T + JFS524I tried to get them online but had no...

Replacement for JFS524F switch with SFP module for Fiber | NETGEAR Communities

Hi folks,Have a small network spanning 2 buildings connected via fiber. Each end has a JFS524F switch with AF711F fiber SFP module.  I am seeing packet...

Factory reset JGS524F prosafe switch without using the prosafe utility | NETGEAR Communities

I am trying to factory reset an inherited JFS524F prosafe switch without using the prosafe utility as I do not know the IP address or subnet the switch is...

Unable to register switch for warranty | NETGEAR Communities

Model: JFS524Serial No.: DW2093K00156 Product is under warranty but unable to register. can you please help

JGS524PE Regularly Hangs, Stopping all Traffic, and Requires a Reboot | NETGEAR Communities

i have a JGS524PE PoE switch which is currently under test, prior to being installed in the network. At least once every 24 hour period the switch hangs and...

Installing JGS524E - can only see switch on network, not other computers or Internet | NETGEAR Communities

I have a newer cable modem connected to a ProSafe VPN Firewall FVS338 which acts as my firewall and DHCP as well as handling port-forwarding. I had an 8-port...

Dead ProSAFE Plus 24 Port Switch with PoE (JGS524PE) | NETGEAR Communities

This switch stopped working and has a limited lifetime warranty but when I try to open a support case it says, "The chat queue is busy right now. Try again...

JGS524PE firmware update | NETGEAR Communities

I have a JGS524PE switch as my main switch of the router. Other switches and POE switches attached downstream to run other computers, printers, cameras, POE...

JGS524NA Statement of Volatility | NETGEAR Communities

Hello, can you please send me a statement of volatility for the JGS524NA?  thanks.

JGS524Ev2 not retaining config on reboot | NETGEAR Communities

similar to other folks that have posted before (e.g....

jgs524 network switch | NETGEAR Communities

Hello, I have the above titled ProSafe 24, and we recently lost electricity. When was a restored, the power indicator light, and no accompanying status...

JGS524Ev2 won’t factory reset with paper clip. Can’t apply any changes in management | NETGEAR Communities

Hello, I would be grateful for some help. I was thinking I would update the firmware to the latest version but when I log on to the switch the apply...

JGS524PE password reset loop | NETGEAR Communities

I lost the password for my JGS524PE switch.  After I pressed the reset button for 30 seconds, entered the default password "password", the Change Admin...

JGS524PE problem with reset and connect | NETGEAR Communities

Hi, I have a problem with the aforementioned NETGEAR JGS524PE switch. When I connect the power, it starts up, but all the LEDs light up and stay on, even...

GS724T and JGS524 Letter of Volatility | NETGEAR Communities

Hello, Can you provide the letters of volatility for GS724T and JGS524. I know these have been provided before, but the links have...

Differences in specs of GS324 and JGS524 | NETGEAR Communities

There are two 24-port unmanaged gigabit switches (at least): The GS324 is gray and a little narrower than the JGS524, which is blue. What are the...

JGS524PE Garbage characters in web UI | NETGEAR Communities

Hi - Just came into possession of a JGS524PE and reset it to factory specs. Seems to switch packets okay.  When I use the web UI in Chrome or...