Search results for: GSM7228PS

GSM7328Sv2,GSM7352Sv2,GSM7228PSv1,GSM7252PSv1 Firmware version 10.0.0.53 - NETGEAR Support

Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Bug Fixes from Release 10.0.0.44: Unable to enable routing on VLAN 1 from GUI SNTP synchronized time is truncated, when show sysinfo by CLI Stop offering IP address when there are many DHCP IP conflicts in DHCP pool Switch crashed when issue 'Show vlan private-vlan' All of ports became 'detach' after remove one rule in ACL M5300-28/52G-POE+ cannot provide power to PD with RPS5412 Switch keep printing Power Supply Alarm& A...

GSM7328S/GSM7352S/GSM7228PS/GSM7252PS/GSM7328FS firmware version v8.0.3.34 - NETGEAR Support

Applicable Models: GSM7328S, GSM7352S, GSM7328FS, GSM7228PS, GSM7252PS, GSM7328S-200, GSM7352S-200 Release 8.0.3.34 Firmware New Features from Release 8.0.3.25 The Product Registration feature is supported. It will guide user to register NETGEAR switch when user login the switch through GUI first time. Bug Fixes from Release 8.0.3.25 Policy stats are not showing any packets processed by policy. Need to add warning to upgrade message during flash update. Fans and temperature status on GUI is not ...

GSM7328S/GSM7352S/GSM7228PS/GSM7252PS Firmware version v10.0.0.25 - NETGEAR Support

Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Release 10.0.0.25 Firmware New Features from Release 10.0.0.25 Support mixed-stacking with M5300-28G(GSM7228Sv1h1),M5300-28G3(GSM7328Sv2h2),M5300-28GF3(GSM7328FSv2h1),M5300-28G-POE+(GSM7228PSv1h2),M5300-52G(GSM7228Sv1h1),M5300-52G3(GSM7252Sv2h2),M5300-52G-POE+(GSM7252PSv1h2). Support AX745(10GBASE-T RJ-45 Port Adapter). Note: The 10.0.0 doesn't support GSM7328FS v1h1,GSM7328Sv1 or GSM7352Sv1, so don't try to download. Upg...

GSM7328S/GSM7352S/GSM7228PS/GSM7252PS Firmware version v10.0.0.31 - NETGEAR Support

Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Release 10.0.0.31 Firmware Bug Fixes from Release 10.0.0.25 Fixed some configuration migration issues. Added "Packets forwarded by cpu and IP Packets received" in "show interface ethernet switchport" output. NMAP command hangs entire core stack. Note: The 10.0.0 doesn't support GSM7328FS v1h1,GSM7328Sv1 or GSM7352Sv1, so don't try to download. Upgrade procedure Save the current configuration data. Normally the firmware wi...

GSM7328Sv2,GSM7352Sv2,GSM7228PSv1,GSM7252PSv1 Firmware version 10.0.0.43 - NETGEAR Support

Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Bug Fixes from Release 10.0.0.31: GSM73xxSv2h1 doesn't show the RPS status correctly using RPS5412 Even if the user "logs out" using the "LOGOUT" button, the file can be downloaded Unable to apply the configure file to the switch after copy it from USB sticker GSM7352Sv2 - Stacking issues on 2 stacks. Getting ACK errors and failure to receive response GSM7328Sv2h2 - Can get only some trafic tru after the defaut route's ho...

GSM7328Sv2,GSM7352Sv2,GSM7228PSv1,GSM7252PSv1 Firmware version 10.0.0.44 - NETGEAR Support

Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Bug Fixes from Release 10.0.0.43: Feature request to have java (tcp 4242) in the management ACL list Unable to ping the VRRP virtual IP address from a routed interface Unable to apply the configure file to the switch after copy it from USB sticker When running cable test, some empty ports showed 'cable status test failed' POE cameras keep rebooting in an endless loop Console hung after session timeout DHCP server did not ...

M5300 Firmware Version 10.0.0.43 - NETGEAR Support

Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.31: GSM73xxSv2h1 doesn't show the RPS status correctly using RPS5412 Even if the user "logs out" using the "LOGOUT" button, the file can be downloaded Unable to apply the configure file to the switch after copy it from USB sticker GSM7352Sv2 - Stacking iss...

M5300 Firmware Version 10.0.0.31 - NETGEAR Support

Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.25: Fixed some configuration migration issues. Added "Packets forwarded by cpu and IP Packets received" in "show interface ethernet switchport" output. NMAP command hangs entire core stack. Upgrade procedure Save the current configuration data. Normally th...

M5300 Firmware Version 10.0.0.44 - NETGEAR Support

Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.31: Feature request to have java (TCP 4242) in the management ACL list Unable to ping the VRRP virtual IP address from a routed interface Unable to apply the configure file to the switch after copying it from USB stick When running cable test, some empty p...

M5300 Firmware Version 10.0.0.53 - NETGEAR Support

Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.44: ,Unable to enable routing on VLAN 1 from GUI ,SNTP synchronized time is truncated, when show sysinfo by CLI ,Stop offering IP address when there are many DHCP IP conflicts in DHCP pool ,Switch crashed when issue 'Show vlan private-vlan' ,All of ports b...

M5300 Firmware Version 10.0.0.25 - NETGEAR Support

Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) New Features: Support mixed-stacking with GSM7328Sv2h1,GSM7352Sv2h1,GSM7228PSv1h1,GSM7252PSv1h1. Support AX745(10GBASE-T RJ-45 Port Adapter). Bug Fixes: STP: The lag port cost is 0 after add ports to it. Failed to download image through IPv6 HTTPs . Failed to download configurat...

M5300 Firmware Version 11.0.0.14 - NETGEAR Support

M5300 Firmware Version 11.0.0.14 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.12 Fixed the issue where the fiber port link goes down after the issue ‘cablestatus <unit/slot/port’’ to test cable. Fixed the issue where the [10G compatibility] Fiber port link goes down after switch reloads...

M5300 Firmware Version 11.0.0.31 - NETGEAR Support

M5300 Firmware Version 11.0.0.31 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.31 GARP vlan status is not stable. Multicast packet from UBNT wifi AP caused GS716T to enter packet storm. Switch crashed in a specific 802.1x setup. Fixed 'devshell access' security issue on GUI. Download Usi...

M5300 Firmware Version 11.0.0.28 - NETGEAR Support

M5300 Firmware Version 11.0.0.23 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.23 mDNS packets will be dropped when IGMP/MLD snooping is enabled. A lot of entries are missing in the Neighbor Table on IPv6 GUI. Switch sends radius accounting requests with default interface IP instead of u...

M5300 Firmware Version 11.0.0.23 - NETGEAR Support

M5300 Firmware Version 11.0.0.23 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.18 Changing VLAN Tag in Port PVID Config does not change presentation in VLAN membership. The command "show fiber-ports optics-info" will not display the transceiver type when plugged into the first 20 ports o...

M5300 Firmware Version 11.0.0.10 - NETGEAR Support

M5300 Firmware Version 11.0.0.10 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1), M5300-52G(GSM7252Sv1h1), M5300-28G3(GSM7328Sv2h2), M5300-52G3(GSM7352Sv2h2), M5300-28G-PoE+(GSM7228PSv1h2), M5300-52G-PoE+(GSM7252PSv1h2), M5300-28GF3(GSM7328FSv2h1) Bug Fixes and Enhancements since 10.0.0.53 Support for Industry Standard VLAN trunking port mode Support for RSPAN (Remote Mirroring) Support for PVST/PVST+ CPU Management IP Changes: Deprecate "network" interface. The old "ne...

M5300 Firmware Version 11.0.0.18 - NETGEAR Support

M5300 Firmware Version 11.0.0.18 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.14 Issue error reply when user attempt to configure sFlow on LAG due to hardware limitation. Stack port information is something wrong on M5300. Web accepting special characters but CLI is not accepting for po...

M5300 Firmware Version 11.0.0.12 - NETGEAR Support

M5300 Firmware Version 11.0.0.12 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.11 Fixed the issue where 10G SFP+ port is unable to link up after switch reload with customer's config Changes and Restrictions While 10.0.0.x supports both M5300 and older GSM73xxSv1h2 such that the two serie...

M5300 Firmware Version 11.0.0.11 - NETGEAR Support

M5300 Firmware Version 11.0.0.11 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.11 Fixed the issue where 'show network' doesn’t show the IP address for the management VLAN. Since 11.0.0.11, ‘show network’ shows the IP address for management VLAN. But if user specifies an IP address on pre...

What switches can be stacked with my M5300 managed switch? - NETGEAR Support

Stacking switches (connecting them together so that they function and are managed as one large switch) requires that all switches in the stack have compatible hardware and firmware. Stacking compatibility with the M5300 switch range The following switches are compatible, and can be stacked together : Model Hardware version Formerly Known As : GSM7328Sv2 GSM7328Sv2h1 GSM7352Sv2 GSM7352Sv2h1 GSM7228PS GSM7228PSv1 GSM7252PS GSM7252PSv1 M5300-28G GSM7228Sv1h1 GSM7228S M5300-52G GSM7252Sv1h1 GSM7252S...

Can't Unstack GSM7252PS / GSM7228PS | NETGEAR Communities

I'm having several issues, but they may all be related to stacking...I successfully stacked two GSM7252PS and one GSM7228PS using the front SFP ports and...

GSM7228PS Ports to use 2 VLANs? | NETGEAR Communities

Hi there,I'm trying to set up my GSM7228PS switch VLANs but not getting any success.My internal network is 10.0.0.x/24, with the internal default gateway...

GSM7228PS coldstarts | NETGEAR Communities

There are a couple of new GSM7228PS switches in a customers location. All switches are behind new USVs and within professional cooled service-rooms. Some of...

GSM7228PS Software License Installation | NETGEAR Communities

Hello, I am using GSM7228PS &amp; UTM-50 and having problem to activate software license for GSM7228PS.I tried to activate as instraction said that register...

GSM7228PS and Cisco phones | NETGEAR Communities

We are trying to add Netgear GSM7228PS switches to our existing Cisco based network. Having trouble with Cisco 7900 series phones losing registration with...

Adding DHCP Option 156 to a GSM7228PS? | NETGEAR Communities

Can anyone guide me to how to add DHCP Option 156 to a GSM7228PS? In the Web interface I see DHCP Pool Options, but when I choose Option Code 156 and Option...

GSM7228PS stuck in bootup phase | NETGEAR Communities

Hi,I seek some guidance for the following issue;GSM7228PS seems to be stuck in the bootup phase according to the power-led (constant amber)I get no response...

GSM7228PS frozen upon boot up after firmware web update | NETGEAR Communities

Hi,&nbsp;I recently updated my switch to the latest Netgear Firmware 10.0.0.53 via the web interface and all good. Now a few days later the unit is...

GSM7228PS Switch cutting out for 20 minutes every 90 minutes | NETGEAR Communities

GSM7228PS, Firmware 8.0.3.25 has started acting strange.Every 90 minutes, the switch goes down for about 20 minutes, and no one can get on the network or...

GSM7228PS Firmware 10.0.0.53 | NETGEAR Communities

Hello,Where can I find Web management and CLI Reference manual for 10.0.0.53 software?Thx, regards

GSM7228PS LAG Issues | NETGEAR Communities

Model: GSM7228PS V2Firmware: 8.0.3.23OS: Windows&nbsp;Hello all,&nbsp;I had a question about a LAG issue I'm having. &nbsp;I have the GSM7228PS with 2 LAGS...

Creating a stack with 2x GSM7228PS and 1x XS708T | NETGEAR Communities

Hello,&nbsp;We plan to deploy 2 x&nbsp;GSM7228PS, plus 1x XS708T, stacked trough SPF+ connectors. We need 4x 10Gbase-T ports for connecting to our storage...

XSM7224S Issue range of IPs to certain ports | NETGEAR Communities

Hi,I have an XSM7224S (awesome bit of kit by the way!) that is my core switch. Into which will be 7 other switches over fibre (mostly GSM7228PS) and some...

How to set M5300-28G(GSM7228S) to Factory Default State | NETGEAR Communities

I know there is a way to do this using the browser.But, is there a way to set M5300-28G(GSM7228S) switch to the factory default state not using the browser...

GSM7328s VLAN connection with ReadyNAS 4200 | NETGEAR Communities

Hi,&nbsp;&nbsp;I am having a bit of trouble trying to configure a ReadyNAS 4200 for iSCSI connections to VMware. &nbsp;I have a GSM7328s, an M5300 and a...

GSM7252PS Console Access | NETGEAR Communities

I have two GSM7252PS units stacked. I attempted to upgrade firmware, but it failed. Now I am unable to obtain a web management GUI or find a DHCP assigned IP...

ProSafe GSM7328Sv2 not booting | NETGEAR Communities

Hi all.So I've had a GSM7328Sv2 for a while now and kinda run into an issue with the switch itself.I recently replaced my router that uses a different LAN...

Stacking GSM7352S with GSM7328S - Problem! | NETGEAR Communities

I have two switches as in the title, a pair of AX742 modules and a cable linking them. Both switches are running firmware 8.0.3.49. I believe them to be...

Stack Error with 2 GSM7328Sv1 | NETGEAR Communities

Hi there,in our company we have two GSM7328Sv1 Switches which we want to stack. We have four AX742 modules, two for each switch. When I try to put them in a...

GSM7328S - enable password | NETGEAR Communities

Hi there,I have a GSM7328S which has been running stock since purchase, I'm trying to set it up and I've been configuring other models without any major...

M5300-28G-POE+ (GSM7228PSv1h2) | 12-Port Managed Gigabit Switch | NETGEAR Support

M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch

M5300-28G (GSM7228S) | ProSAFE 24-port Gigabit L2+ Managed Stackable Switch | NETGEAR Support

M5300-28G (GSM7228S) - ProSAFE 24-port Gigabit L2+ Managed Stackable Switch

M5300-28GF3 (GSM7328FSv2) | ProSAFE 24 SFP + 4 Gigabit L3 Managed Stackable Switch | NETGEAR Support

M5300-28GF3 (GSM7328FSv2) - ProSAFE 24 SFP + 4 Gigabit L3 Managed Stackable Switch

M5300-28G3 (GSM7328Sv2h2) | ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch | NETGEAR Support

M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch

M5300-52G-POE+ (GSM7252PSv1h2) | ProSAFE 48+4 L2+ POE Stackable Managed Switch | NETGEAR Support

M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch

M4100-50G-POE+ (GSM7248Pv1h1) | 46-port GE + 4 GE Combo L2 Managed PoE+ Switch | NETGEAR Support

M4100-50G-POE+ (GSM7248Pv1h1) - 46-port GE + 4 GE Combo L2 Managed PoE+ Switch