Search results for: GS728TPPv2

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.3.3 - NETGEAR Support

MPORTANT CHANGES NOTE: This new firmware release requires product registration to unlock full access to the local browser UI. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. New Features and Enhancements: Faster application of multiple port configuration settings through the Insight Cloud Portal and the Insight app. Bug Fixes: Port now sends properly formed IGMP queries after booting up with non-default VLAN (VLAN 1). Switch connectivity is no ...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.6.2 - NETGEAR Support

New Features and Enhancements: Registration is no longer required to access the full UI menu. It can be skipped at UI login. Insight management mode is disabled by default. Select the “NETGEAR Insight Mobile App and Insight Cloud Portal” radio button to enable Insight management mode. You can pause Insight management mode at any time to temporarily manage the switch through the device UI by selecting the “Local-Only GUI” radio button. To return to Insight management mode, select the “NETGEAR Ins...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.48 - NETGEAR Support

Security Fixes: PSV-2019-0059 PSV-2019-0066 Bug Fixes: [LLDP-MED] LLDP Network Policy Not being send to Polycom VVX401 phones correctly [IGMP snooping] Multicast stream is interrupted for around 1-2 seconds when a device leaves a Multicast group [ACL] Implicit deny is not working when configuring MAC address Access Control List [SNMP] Uptime reported via SNMP gets reset after around 49 days [SNMP] SNMP service hangs up after 1-2 days Known Issues: [File management] Copy image fail [Workaround]: ...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.31 - NETGEAR Support

GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades. New features and enhancements: Initial Release Notes: The USB storage device that you attach to the USB port must comply with the following requirements: - The USB device must support USB 2.0. - The USB device must support the FAT32 or VFAT file system. The NTFS file system is not supported.. Known issue: The device does no...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.9.3 - NETGEAR Support

Bug Fixes: Fixes the issue on the System > Device View page where the power LED of the device is not shown lit. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 6.0.9.1: We recommend against downgrading the firmware image to 6.0.8.x or earlier version after updating to 6.0.9.1 or later versions. Since HTTPS i...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.10 - NETGEAR Support

New Features: Add Secure Diagnostic Mode (SDM) to allow NETGEAR Support to establish a secured connection for remote troubleshooting. This is disabled by default. Bug Fixes: Fixes the issue when an OUI is added, the last two hexadecimal are changed to E0 instead of the entered value. Changes: After HTTPS is enabled, accessing the device UI via HTTP is not redirected to HTTPS. Warnings: Read and follow these warnings before updating a firmware version: We recommend against downgrading the firmwar...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.37 - NETGEAR Support

GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades. New features and enhancements: Improved German and Japanese translation for Web GUI and context help.. Changed MVR VLAN setting behavior to be consistent as other NETGEAR smart switches. Fixed Issues: Device may run out of memory if there is a frequent renewal of DHCP IPv6 address. Can't set the PVID of a port when the lang...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.26 - NETGEAR Support

New Features and Enhancements: The maximum number of LLDP (Link Layer Discovery Protocol) neighbors supported by the switch has been increased. This enhancement improves compatibility in environments with high device density and ensures more comprehensive network topology discovery. Bug Fix: Fixes the issue where the switch could go offline in Insight when using a Layer 3 VLAN. The update ensures the switch stays connected in this setup. Warnings: Read and follow these warnings before you update...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.4.4 - NETGEAR Support

IMPORTANT CHANGES: Firmware version 6.0.4.4 requires product registration to unlock full access to the local browser UI. A limited feature set is available without registration. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. New Features and Enhancements: Increase the resolution for the Storm Control > Threshold setting from 10Mbit to 1Mbit to support finer-grained values (for example, you can set 5.1). Bug Fixes: Added support for Insight PoE...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.8.2 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 6.0.1.XX: Since HTTPS is disabled by default in v6.0.6.2, the device UI Home page does not display automatically after using HTTPS to update to this firmware version. Open a new web browser tab and type the switch’s IP address to access the Home page. Default community string “Private” and “Public” for SNMPv1/v2 are not available in ne...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.4.6 - NETGEAR Support

New Features and Enhancements: You can login and access all features through the local browser UI 3 times without registering the switch through your netgear.com account. A limited feature set is available without registration. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. Bug Fixes: PoE scheduler in the local browser UI fails to schedule across midnight Syslog service can fails when logging severity is set to ‘debug’ When setting recurring E...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.0.45 - NETGEAR Support

GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades. Enhancements and Modifications: Security – TLS V1.0 is no longer supported. Security – Add configurable option to disable HTTP. Security – Enforce more secured password rule. Security – The function to reset password is removed from web GUI. Security – Web access will be locked out temporarily when attempts to login using w...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.20 - NETGEAR Support

Enhancements: Add USB CLI commands to show USB disk information. Updated help text to correct the explanation of the wildcard mask meaning under IPv4 ACL rule. A wildcard mask of 255.255.255.255 now indicates that none of bits are important. A wildcard of 0.0.0.0 indicates that all the bits are important. Change Syslog time stamp format, following ISO 8601. When changing to Insight mode for the first time, device IP and VLAN settings are kept, no longer reset to default values. Bug Fixes: Fixes ...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.1.14 - NETGEAR Support

IMPORTANT CHANGES NOTE: This new firmware release will require product registration to unlock full access to the local management GUI. To learn the access restriction, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. New Features and Enhancements: Directed registration for warranty and support entitlement NETGEAR Insight remote monitoring and management support based on v5.7 Device Auto re-claim support from Insight App / Cloud portal Bug Fixes: [File management] Fix...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.5 - NETGEAR Support

New features: Add Secure Shell (SSH) server for remote login. This is enabled by default. Lite command-line interface (CLI). To find the Lite CLI Reference Manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page. Bug Fixes: Fixes an issue where access to the switch sometimes fails when using protocol-based Auto-VoIP. Fixes an issue where device settings might be lost when multiple configuration changes are ...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.8.1 - NETGEAR Support

Bug Fixes: Fixes the issue where the SNMP service hangs when the MAC table is fully populated and SNMP walk is executed continuously. Fixes the issue where turning off both HTTP and HTTPS at the same time causes the device UI to become inaccessible. Fixes the issue where a brief pause in protocol packet forwarding to the CPU occurs when the rate exceeds 150 packets per second. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 6.0.1.XX: Since HTTPS is dis...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.14 - NETGEAR Support

Enhancements: Upgrade OpenSSL to version 1.1.20 Add TLS 1.2/1.3 support Support SSH access control session Bug Fixes: Power Timer Schedule does not work for certain time zones Cannot bind ACL rule to port 48 with FW v6.0.10.5 for GS752TP and GS752TPP Switch does not send SNMP linkUp or linkDown traps Client cannot receive an IP address when using an 802.1Q trunk (GARP) VLAN assigned through a RADIUS server SNMP traps show community string with double quotes SSH incorrectly starts again after a r...

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.10.22 - NETGEAR Support

Enhancements: Support MSchapv2 for RADIUS authentication Bug Fixes: Fixes the issue where you might not be able to access the device UI after the switch’s IP address is changed or renewed multiple times. Fixes the issue where the device UI might become inaccessible when the IP address is changed. Fixes the issue where you cannot configure IPv6 addresses in the range of unique local addresses (fc00::/7). Fixes the issue that the EAP Success packets still flood after receiving EAPOL start packets....

GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP Firmware Version 6.0.10.17 - NETGEAR Support

Enhancements: Upgrades Insight Agent to version 6.9.0.60900034 Adds an option to enable a longer PoE detection time for powered devices (PDs) that might need a longer detection time, such as the Hikvision camera model DS-2CD2146G2-ISUI. Bug Fixes: Fixes the issue where the switch bypasses 802.1x authentication if a device such as an IP phone is connected to a voice VLAN on the switch. Fixes the issue where the LLDP options "Rx and Tx" and "Disabled" are inverted for the admin status of the port....

GS728TPv2 / GS728TPPv2 / GS752TPv2 / GS752TPP Firmware Version 6.0.5.2 - NETGEAR Support

New Features and Enhancements: Added ping and traceroute network administrative functions to the Troubleshooting page in the Insight Web Portal and app. Security Fixes: Fixes security vulnerabilities. This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes the issue where the DNS host configuration doesn’t accept an IPv6 address. Fixes the issue where the PoE schedule for weekly recurren...

Does GS728TPPv2 have a limit on number of mac addresses in a mac address-based VLAN? | NETGEAR Communities

I'm looking for a switch with POE and mac address-based VLAN capabilities and came across the GS728TPPv2. I want to put my smart home devices in a...

Issue with PoE Interface on GS728TPPv2 | NETGEAR Communities

Hello everyone, I'm experiencing a persistent issue with the PoE interface on my NETGEAR GS728TPPv2 switch.The interface seems to be constantly loading...

ProSAFE 24-Port Gigabit PoE+ Smart Switch with 4 SFP Ports (GS728TPPv2) | NETGEAR Communities

i got this for my security cam system and I'm trying to know what port will give it internet so i can set it up it in the  link/act mode and can find it...

GS316EPP VLAN trunk to GS728TPPv2 | NETGEAR Communities

Trying to setup vlans to isolate SKYQ boxes from the main network (getting all sorts of issues, and it seems common).  I have a Vigor router connected...

GS728TPPv2 how to trunking SonicWALL VLAN | NETGEAR Communities

HI Support we have the remote station use SonicWALL TZ500 + GS728TPPv2 could switch setup on customer site. We all set up on SonicWALL TZ500, the...

GS728TPPV2 POE Loading | NETGEAR Communities

Can find others with this same problem but no solution, does one exist now? Updated firmware to 6.0.10.14 but still the same in all...

SNMP GS728TPPV2 | NETGEAR Communities

Hello all,I would like to add GS728TPPV2 Switches into SNMP Monitoring. Unfortunately I did only find at System > SNMP > Supported...

GS728TPPv2 working with Nest Mesh Router issues | NETGEAR Communities

We have internet service with Google Fiber. We are using a NEST MESH router with 3 additional mesh points. When we try to connect the internet to one of...

GS728TPPv2 M4100-24PoE+ Port PVID question with two vlans | NETGEAR Communities

I have set up two vlans with different subnets with dhcp and dns enabled on my UTM.  These are both set on one port on the UTM.When I connect this port...

Configure vlan security Netgear GS728TPPv2 M4100-24PoE+ | NETGEAR Communities

I have run out of ports on my UTM which defines each subnet.  Is it possible to have two different subnets share a vLan.My problem is that each subnet...

Vlan Routing to Internet GS728TPPv2 | NETGEAR Communities

Hi all! I really need you help with my issue, I have one GS728TPPv2 with SW 6.0.6.3 version And my issue is something like in this...

GS728TPPv2 PoE Configuration Loading page | NETGEAR Communities

The PoE Configuraiton page and Advanced page just keeps loading. PoE itself appears to be working. Just can't load the configuration page. Other pages are...

Switch GS728TPPv2 not working when connected to wireless bridge | NETGEAR Communities

Hi all,I tried others forums but to no avail ....we need to switch our security cams to poe system. Since the building is not ours we cannot use utp...

GS728TPPv2 stackable switches | NETGEAR Communities

I just purchased three GS728tppv2 switches and would like to stack them together using SPF ports. I am new into SPF and would like to know what kind of...

GS728TPPv2 Fan speed (idle) | NETGEAR Communities

Hello NETGEAR Community,i just set up a GS728TPPv2 in my Office. I need some POE ports and have a long history using NETGEAR Products so i buy a...

MIB files for GS728TPPV2 | NETGEAR Communities

Good Morning. I am looking for the MIB files for the following switches. GS728TPPV2 , M5300 - 28GF3, GS418TPP To be used with BMS.  Thank you very...

GS728TPPv2 Every time I log in! "An error occurred while accessing the registration server" | NETGEAR Communities

I get this error every time I log in! Any suggestions on how to fix this please?   An error occurred while accessing the registration server. Check your...

ARP Cache Empty Except 1 | NETGEAR Communities

Before I start, I want to clarify that mine's a GS728TPPv1 (no v#), but that wasn't a choice for the "Associated Products," so I picked GS728TPPv2. I...

Netgear GS728TPv2 | NETGEAR Communities

I have my Netgear GS728TPPv2 powering up 20 units of Akuvox C315W indoor monitors. However, all the indoor monitors fails to boot. However, I have tried...

GS728TPv2 is it End of Life? | NETGEAR Communities

We have a number of GS728TPv2 switches - can anyone confirm that these are now End of Life and should be removed? We have fairly strict cyber insurance which...

FS728TPv2 | 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports | NETGEAR Support

FS728TPv2 - 28-Port 10/100 Fast Ethernet Smart Switch with 24 PoE Ports, 2 Gigabit Copper plus 2 Gigabit Copper/SFP Combo Ports

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff - NETGEAR Blog

Campus-wide large-scale connectivity for SIMATS delivers a better university experience for students and staff