Search results for: GS716Tv3

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.16 - NETGEAR Support

Fixed Issues Fixed the issue where the SFP status could randomly be turned off after a restart. Fixed the issue where the configuration file cannot be uploaded using DNS Name through HTTP. Fixed the issue where the VLAN Tag setting is not kept after reboot. Fixed the issue where the status of converted security MAC address learned from LAG is incorrectly displayed as 'Learned' in MAC table. It should be displayed as 'Static' instead. Modifications Few changes are made to pass Korea TTA test for ...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.33 - NETGEAR Support

New Features and Enhancements: For compliance with California state law, the default “password” must be changed after logging into the switch. To configure SNMPv3, Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. If you upgrade firmware to V6.3.1.33 from an older version, clear your temporary internet files or browser cache to see the new settings. Added a new option under “Security > Management Security > SCC Control” ...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.9 - NETGEAR Support

Fixed issues ,Fixed the SNMP display and conversion issues related to AgentTransferDownloadGroup and LLDRemManAddrTable ,Fixed the problem of not getting response using SNMPGet with UDP broadcast (IP: 255.255.255.255) to port 161 ,Fixed the issue where system locks up when performing a SNMP GET on MIB object - dot1qVlanForbiddenEgressPorts ,Fixed the problem of unexpected result is seen when setting and getting the value of MIB object - StaticUntaggedPorts on VLAN 1 ,Fixed the issue where GS748T...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.36 - NETGEAR Support

Bug Fixes: 802.1AS status (Switching > 802.1AS > Basic > 802.1AS Configuration) is enabled; however, “GrandMaster Present” still displays incorrectly as FALSE. Unable to open some configuration web pages through device view (System > Device View). Known Issues: Warning messages pop up when you enable the https admin status. Cable test results sometimes show incorrectly long values. Download Link: https://www.downloads.netgear.com/files/GDC/GS716TV3/GS716Tv3_GS724Tv4_GS748Tv5_V6.3.1.36.zip Firmwa...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.39 - NETGEAR Support

Bug Fixes: Unable to set the number of “Maximum Allowed Dynamically Learned MAC” to more than 600 through SNMP. The maximum allowed value should be 4096. Security Fixes: Various security vulnerability fixes and enhancements. Known Issues: Cable test results sometimes show incorrectly long values. Download Link: https://www.downloads.netgear.com/files/GDC/GS716TV3/GS716Tv3_GS724Tv4_GS748Tv5_V6.3.1.39.zip Firmware Update Instructions: To update your product’s firmware, follow the instructions in y...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.11 - NETGEAR Support

Fixed Issues ,Fixed the issue where device view does not work after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer ,Fixed the issue where ‘Wake on Lan’ doesn’t work when LACP LAG is configured on that port ,Fixed the issue where DHCP discover packet is sent incorrectly from the switch with source IP other than 0.0.0.0 Known issues Warning messages pop up when the HTTPS admin status is enabled. [Workaround]: Refresh the GUI screen. The cable test results sometimes...

GS716Tv3 / GS724Tv4 / GS748Tv5 Firmware Version 6.3.1.47 - NETGEAR Support

Bug Fixes: Fixes an issue where only one IP ACL can be added to a switch in Security>ACL>Advanced>IP ACL. Fixes an issue in Interface Shaping Rate won’t accept range 1 -15 in QoS>CoS>Advanced>CoS Interface Configuration. Fixes an issue where router solicitation packets are not forwarded when MLD Snooping Admin Mode is enabled in Switching>Multicast>MLD Snooping. Fixes an issue where a properly configured static route might not work correctly. Adjusts the signal for port 17 to port 24 to be less ...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.4 - NETGEAR Support

The GS716Tv3, GS724Tv4, and GS748Tv5 switches are NETGEAR's hardware-refreshed smart switches based on the previous GS716Tv2, GS724Tv3, and GS748Tv4 switches. This maintenance release supports the EAV (Ethernet Audio Video) feature on the new GS716Tv3, GS724Tv4, and GS748Tv5 switches. Some software issues are also fixed in this release. See the release notes for the fixed issues and known issues. GS716Tv3, GS724Tv4, and GS748Tv5 support the latest Smart Control Center. Use SCC version 1.1.3.2 fo...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.0.9 - NETGEAR Support

GS716Tv3, GS724Tv4 and GS748Tv5 are NETGEAR’s hardware refreshed smart switches based on previous old version GS716Tv2/GS724Tv3/GS748Tv4.Below are the new features for GS716Tv3/GS724Tv4/GS748Tv5. Two combo ports on GS716Tv2/24Tv3 are changed to 2 dedicated SFP ports. EAV (Ethernet Audio Video) feature is supported for both GS716Tv3/24Tv4 and GS748Tv5. Multicast VLAN Registration Dynamic ARP Inspection Protocol based VLAN and MAC based VLAN MLD Snooping This release notes contains features and kn...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.34 - NETGEAR Support

New Features and Enhancements: Java-plugin/Java applets are no longer required to access the ‘Device View’ page. Known Issues: Warning messages pop up when the HTTPS admin status is enabled. [Workaround]: Refresh the GUI screen. The cable test results sometimes show a much longer value. [Workaround]: Redo the cable test on the same port. Firmware Update Instructions: Download Link: http://www.downloads.netgear.com/files/GDC/GS716TV3/GS716Tv3_GS724Tv4_GS748Tv5_V6.3.1.34.zip To update your product...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.19 - NETGEAR Support

Fixed Issues: Multicast packet with destination MAC address of 01:80:c2:00:00:1c and Ethernet type of 0x88CC causes loop in properly converged STP topology. Debugging URL of ‘devshell’ is accessible without authentication. Can't correctly set VLAN Tag in 'Port PVID Configuration' GUI page. Switch incorrectly discards IS-IS hello packages. Modifications: Added configurable option “Block Unknown Multicast Address” in GUI page of ‘Switching > Multicast > IGMP Snooping > IGMP Snooping Configuration’...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.43 - NETGEAR Support

Bug Fixes: Switch reboots abnormally when a SNMPv3 user is configured with special character. Security Fixes: Addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security Known Issues: Cable test results sometimes show incorrectly long values NMS300 does not support current firmware Download Link: https://www.downloads.netgear.com/files/GDC/GS716TV3/GS716Tv3_GS724Tv4_GS748Tv5_V6.3.1.43.zip Firmware Update Instructions: To u...

Factory default process on GS724Tv4, GS716Tv3 & GS748Tv5 - NETGEAR Support

Factory Default Process on GS724Tv4, GS716Tv3, and GS748Tv5 On smart switch models GS716Tv3, GS724Tv4, and GS748Tv5, recoveryApp mode is introduced in firmware version V6.3.1.x. Its function is to reflash firmware to the switch in abnormal cases where both firmware images have become corrupt. To enter recoveryApp mode: Insert a pin into the Factory Default pinhole. Hold the pin in place for longer than 9 seconds. The switch has now entered recovery App mode and it can be accessed from the Smart ...

Security Advisory for Cross Site Request Forgery on Some Smart Managed Pro Switches, PSV-2020-0368 - NETGEAR Support

Associated CVE IDs: None NETGEAR has released fixes for a cross site request forgery security vulnerability on the following product models: GS716Tv3, running firmware versions prior to 6.3.1.36 GS724Tv4, running firmware versions prior to 6.3.1.36 NETGEAR strongly recommends that you download the latest firmware as soon as possible. To download the latest firmware for your NETGEAR product: Visit NETGEAR Support. Start typing your model number in the search box, then select your model from the d...

NMS300 Software Release 1.3.0.21 - NETGEAR Support

This release notes contains features and known issues for NETGEAR ProSAFE NMS 300 Network Management Software release 1.3.0.21. Key features available in this 1.3 release of NMS300 software are the following: Supports for NETGEAR ProSAFE Firewall products Supports for NETGEAR ReadyNAS & ReadyDATA products Supports for few of the newly released Switch & Wireless products The below list provides the specific device models which are now supported in NMS300 starting from this 1.3 release: FVS318N, F...

Security Advisory for Pre-Authentication Buffer Overflow on Some Switches, PSV-2022-0016 - NETGEAR Support

Associated CVE IDs: None First published: 11/7/2022 NETGEAR has released fixes for a pre-authentication buffer overflow security vulnerability on the following product models: GS728TX fixed in firmware version 6.6.4.28 GS728TXP fixed in firmware version 6.6.4.28 GS752TX fixed in firmware version 6.6.4.28 GS752TXP fixed in firmware version 6.6.4.28 GS724Tv4 fixed in firmware version 6.3.1.43 GS748Tv5 fixed in firmware version 6.3.1.43 GS716Tv3 fixed in firmware version 6.3.1.43 GS324T fixed in fi...

UKCA Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. Model A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACC761 / ACC763 / AXLC761 / AXLC763 ACM761 / ACM762 / AXLM761 / AXLM762 AFT402 AGM731F AGM732F AGM734 APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS600W / APS1200W APS600Wv2 APS600Wv3 APS920W APS1000W APS1200Wv2 APS2000W APS2000Wv2 AXC761 AXC7610 AXC7615 AXC7620 AXC763 AXC765 AXC767 AXM761, AXM762, AXM763, AXM764, AXM765 AXM765v2 BR200 CSM4532 EAX12 EAX17 EAX20...

UK PSTI Declaration of Conformity - NETGEAR Support

On 29th April 2024, the United Kingdom’s Product Security and Telecommunications Infrastructure (UK PSTI) Act takes effect. The UK PSTI Act requires consumer networking devices to meet increased security standards with the stated goals of reducing cyber attacks and better protecting individual privacy and security. All NETGEAR products sold in the UK comply with the applicable security requirements that the UK PSTI Act defines. To view the UK PSTI Act Declaration of Conformity for a NETGEAR prod...

Security Advisory for Authentication Bypass and Remote Command Execution on Some Smart and Managed Switches, PSV-2017-0857 - NETGEAR Support

NETGEAR is aware of a security issue that can allow an attacker to access the debugging URL of some models of Smart and Managed Switches without first authenticating. After accessing the debugging URL, the attacker can then execute commands on the switch, such as resetting or restarting the switch. This attack can only be executed remotely if the switch itself can be accessed remotely; for most users, a firewall will block access from outside the local network. This vulnerability affects the fol...

EU Declarations of Conformity - NETGEAR Support

Please click on the Model to view Declarations of Conformity. To access EU Declarations of Conformity for Arlo products, visit https://kb.arlo.com/000061839/EU-Declarations-of-Conformity-for-Arlo-and-VueZone. Model 6000451 A6100 A6150 A6210 A7000 A7500 A8000 A8500 A9000 ACM761 / ACM762 / AXLM761 / AXLM762 ACC761 / ACC763 / AXLC761 / AXLC763 AC785S AC790S AC810 / AC810S AFT402 AGM731F AGM732F AGM734 AirCard 797 (AC797) APM402XL APM408 / APM402 APS150W APS250W APS254W APS299W APS350W APS550W APS60...

How do I constrain multicast traffic to specific ports on GS716Tv3? | NETGEAR Communities

I can't find specific instructions to constrain multicast traffic on the GS715Tv3 smart switch. I need to force all multicast traffic to travel over a...

Time to renew my GS716T v3 | NETGEAR Communities

Hi all I have a GS716T v3 which is the main switch in my home. I got it 2nd hand about 5 years ago, so it will be older than that now. I think it...

GS716T v3 API | NETGEAR Communities

Hi, I would like to do an automatic port test without accessing the web interface. I would like to verify that it actually works by connecting two...

Betreff: Netgear GS716Tv3 delete VLAN 2 and 3 | NETGEAR Communities

In principle, this is also not allowed in the current Firmware of the GS308T, but you may export the settings into a text file and modify it and update the...

Orbi RBR750 working with GS716Tv3 working with VLANS | NETGEAR Communities

I have an Orbi RBR750 Home system (2 satellites) connected to a Virgin Hub (192.168.0.1) which is set to modem mode. The Orbi acts as a DHCP for my...

GS716Tv3: cannot find place to activate license key on my.netgear.com | NETGEAR Communities

Hello Netgear community, I was able to activate AVB 802.1AS license key, download the license, and get into the switch in one month ago in Dec, 2022 but...

GS110TP, GS716Tv3, GS724Tv4 Statements of Volatility | NETGEAR Communities

I am requesting a statement of volatility for the following Netgear Ethernet Switches:       1. GS110TP       2....

GS716Tv3 - Benefit to change taged one port switch cascading to one port LAG? | NETGEAR Communities

Another newbie Question about LAG.I've connected two GS716T with only one tagged port (switch#1 port1 - switch#2 port1 all as (T)).Is there a benefit when i...

How do I block Multicast traffic on a single port on a GS716Tv3 | NETGEAR Communities

I have a switch with several devices connected all in the same VLan (1 default). All connections are in the same subnet. But one device cannot handle the...

Netgear GS716Tv3 VLAN help | NETGEAR Communities

Hi all, I just picked up a GS716Tv3 managed switch and want to create some VLANs on my network. I've tried to use this support...

GS716Tv3 Rate Limiting | NETGEAR Communities

Hello, We recently purchased GS716Tv3 and are conducting tests.One of the test items is to set port based ingress and egress rate limits.The specification...

GS716Tv3 Ha SETUP | NETGEAR Communities

Hi!I want to set up HA with fortigate firewalls...

HA setup between GS716Tv3 switches? | NETGEAR Communities

Hi!I want to set up HA with fortigate firewalls...

NETGEAR GS716Tv3 configuration for packet monitoring | NETGEAR Communities

Hi all, Here is my current configuration:-       LTE...

Port mirroring to communicating computer GS716Tv3 | NETGEAR Communities

Hello, I have just received GS716Tv3 switch and have configured a port as mirroring port, I correctly receive traffic from other ports.My issue is that...

GS716Tv3 Letter of Volatility | NETGEAR Communities

Please provide a letter of volatility for switch model GS716Tv3.  Thank you.

GS716t-v3 ACL Port Range | NETGEAR Communities

Hello Is there a way to define a range of ports to allow rather than having a rule for each port in the extended ACL's Thanks

Netgear GS716Tv3 delete VLAN 2 and 3 | NETGEAR Communities

I'm using VLANs 2,3,4 on my network.  I just got a new GS716Tv3, and I noticed that there's already a Auto VoIP VLAN 2, and Auto -Video VLAN 3. ...

GS716Tv3 Letter of Volatility | NETGEAR Communities

Hi,   I need a Letter of Volatility for the GS716Tv3 Smart Managed Switch.   Thanks,   Steven Bui

GS716Tv3 agentPortSecurityMACAddressAdd Not writeable | NETGEAR Communities

The SNMP agentPortSecurityMACAddressAdd is shown to be a read/write OBJECT-TYPE, but it is not writeable or I don't understand how to craft the...