Search results for: GS716Tv2

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.13 - NETGEAR Support

Bug Fixes: Fixed the issue that if queue ID other than 0 (eg. queue 2) is selected when configuring minimum bandwidth for all ports (QoS > Advanced > Interface Queue Configuration), the minimum bandwidth will be set in queue 0 instead. Fixed the issue that SNMPv3 Engine ID is not unique. Fixed the issue that the switch would lose synchronization with 802.1AS master clock occasionally when EAV is enabled. Fixed the issue that port 15 and 16 of GS724Tv3 would not link up after a reboot if the spee...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.1.10 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. New Features and Enhancements: IPv6 Management. IPv6 ACL. IPv6 QoS. Known issues: None. Notes for IPv6 ACL and QoS: Due to unavailability of hardware resources on GS716T and GS724T, the following are the restrictions for IPv6 ACL and QoS: A rule with all supported qualifiers cannot be bound on the interface. If any ACL has selected qualifier as...

GS716Tv2 / GS724Tv3 Firmware Version 5.4.2.30 - NETGEAR Support

Bug Fixes: Fixed the issue that after deleting SNMP default communities – public and private (System > SNMP > SNMPv1/v2 > Community configuration), both will return after switch reboot. Fixed the issue where the packets with destination MAC address of 01:80:c2:00:00:1c are still flooded out in a looped environment with STP enabled. Fixed the issue where the debugging URL of ‘devshell’ is accessible without authentication. Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configura...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.19 - NETGEAR Support

Bug Fixes: Fixed the issue where the device view (System > Device View) fails to come up after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Limitations: Combined MAC and IP ACL do not work with double VLAN tagged traffic. Using the Download Link below, down...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.1.13 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. Bug Fixes: Remove "1000 Mbps Full Duplex" selection from the drop-down menu for Port Speed (Switching > Ports > Port Configuration) since it is covered by the "Auto" option. Fixed the problem that the MRP (Switching > MRP) and 802.1AS (Switching > 802.1AS) settings are lost after a system reboot. Known issues: There is no LLDP neighbor informat...

GS716Tv2 / GS724Tv3 Firmware Version 5.4.2.27 - NETGEAR Support

Bug Fixes: Fixes the issue where the switch web GUI cannot be accessed after 802.1X port authentication (Security > Port Authentication >Advanced > 802.1X Configuration) is enabled. Addresses the following security vulnerability issues published on CVE web site https://cve.mitre.org/: CVE-2013-4775 CVE-2016-7941 Known Issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically change back to 1 after its associated VLAN is deleted. Workaround: Manually change ...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.10 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. New Features: Add IPv6 management, IPv6 ACL, and IPv6 DiffServ support. Bug Fixes: Fixed the issue that SCCD (Smart Control Center Discovery) Utility cannot discover the device when its DHCP lease time has expired. Fixed the issue that VLAN does not change via RADIUS VLAN assignment unless bring the link down and up. Known issues: Port PVID (Sw...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.9 - NETGEAR Support

GS716Tv2 and GS724Tv3 supports the latest Smart Control Center, please use SCC version 1.1.3.1 for switch discovery, basic configuration and FW upgrades. Bug Fixes: Fixed the issue that SCCD (Smart Control Center Discovery) Utility cannot discover the device when its DHCP lease time has expired. Fixed the issue that VLAN does not change via RADIUS VLAN assignment unless bring the link down and up. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatica...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.18 - NETGEAR Support

Bug Fixes: Fixed the issue of switch not able to obtain IP address from some DHCP server. This particular DHCP server requires the source address from the DHCP discovery packet to be 0.0.0.0. Fixed the issue of stronger key (bigger than 2048 bits) can’t be downloaded to the switch. Fixed the issue where switch receives SNTP KISS OF DEATH from SNTP server, switch will no longer contact the SNTP server for time update. Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration)...

GS716Tv2 & GS724Tv3 Firmware Version 5.4.2.25 - NETGEAR Support

Bug Fixes: Fixes the issue where the following optional TLV values of LLDP-MED are incorrect: Optional Mau Type Auto-negotiation advertised capability Maximum Frame size Asset ID Manufacturer name Firmware and Hardware revision Known issues: Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted. Workaround: Manually change the PVID back to 1. Limitations: Combined MAC and IP ACL do not work with double VLAN...

MIBs for Smart switches - NETGEAR Support

The following models support complete standard MIBs: FS728Tv2 FS752TP GS108Tv2 GS110TP GS716Tv2 GS724Tv3 GS748Tv4 GS724/48TP GS7xxTS/TPS Additionally, you can find the MIBs for your switch on the http://support.netgear.com page for the switch in question. References: http://www.oidview.com/mibs/detail.html http://www.oidview.com/mibs/4526/md-4526-1.html Further MIB links: GSM73xxSv2 MIBs for Firmware Version 8.0.3.28 (GSM 7228PS, 7252PS, 7328Sv2, 7352Sv2, 7328FS) GSM7224v2, GSM7248v MIBs for Fir...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.0.9 - NETGEAR Support

GS716Tv3, GS724Tv4 and GS748Tv5 are NETGEAR’s hardware refreshed smart switches based on previous old version GS716Tv2/GS724Tv3/GS748Tv4.Below are the new features for GS716Tv3/GS724Tv4/GS748Tv5. Two combo ports on GS716Tv2/24Tv3 are changed to 2 dedicated SFP ports. EAV (Ethernet Audio Video) feature is supported for both GS716Tv3/24Tv4 and GS748Tv5. Multicast VLAN Registration Dynamic ARP Inspection Protocol based VLAN and MAC based VLAN MLD Snooping This release notes contains features and kn...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.4 - NETGEAR Support

The GS716Tv3, GS724Tv4, and GS748Tv5 switches are NETGEAR's hardware-refreshed smart switches based on the previous GS716Tv2, GS724Tv3, and GS748Tv4 switches. This maintenance release supports the EAV (Ethernet Audio Video) feature on the new GS716Tv3, GS724Tv4, and GS748Tv5 switches. Some software issues are also fixed in this release. See the release notes for the fixed issues and known issues. GS716Tv3, GS724Tv4, and GS748Tv5 support the latest Smart Control Center. Use SCC version 1.1.3.2 fo...

Security Advisory for CVE-2016-7941, PSV-2016-0150 - NETGEAR Support

NETGEAR is aware of a security issue on some models of ProSAFE Gigabit Smart Managed Switches that can let an attacker permanently modify certain system variables. This vulnerability occurs when a remote attacker uses SNMP to access stored XSS on the web management interface. The only system variables that can be accessed and modified because of this vulnerability are system name, system location, and system contact. No other settings are vulnerable, and no network traffic or credentials are exp...

NMS300 Software Release 1.5.0.11 - NETGEAR Support

This release notes contains features and known issues for NETGEAR ProSAFE NMS300 Network Management Software release 1.5.0.11. NMS300 issues fixed on 1.5.0.11 Removed the menu service start/stop in the start menu. The service start/stop menu doesn't work on windows 10. User can start/stop service via service manager which is provided by windows. On NMS300v1.4, SMTP uses computer's name to create a sender's email which is blocked by some SMTP server in some scenario. The Common STP data is not av...

Security Advisory for CVE-2013-4775, PSV-2016-0093 - NETGEAR Support

The original version of this advisory and the Encripto Security Advisory where this issue was identified incorrectly asserted that this defect could be exploited by a “remote attacker.” In fact, an attacker trying to exploit this vulnerability must be either physically or logically present on the same subnet as the switch. NETGEAR is aware of a security issue that can allow attackers on your local network to read startup configuration files, including encrypted admin credentials, for some models...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.11 - NETGEAR Support

Fixed Issues ,Fixed the issue where device view does not work after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer ,Fixed the issue where ‘Wake on Lan’ doesn’t work when LACP LAG is configured on that port ,Fixed the issue where DHCP discover packet is sent incorrectly from the switch with source IP other than 0.0.0.0 Known issues Warning messages pop up when the HTTPS admin status is enabled. [Workaround]: Refresh the GUI screen. The cable test results sometimes...

Common questions about Smart Control Center - NETGEAR Support

What is Smart Control Center utility? NETGEAR's new Smart Control Center (SCC) is a Windows based application replaces the older Smart Wizard Discovery Utility. Its main function is to discover smart switches in your network and to help you to perform management operations like firmware upgrade and IP assignment. The SCC can also support mass configuration along with mass firmware upload. I used the Smart Control Center to find the Smart switch's IP address, but I cannot access the Smart switch'...

NMS300 Software Release 1.4.0.11 - NETGEAR Support

This release notes contains features and known issues for NETGEAR ProSAFE NMS300 Network Management Software release 1.4.0.11. Key features available in this 1.4 release of NMS300 software are the following: Support for additional switch, wireless access point & firewall devices. See table below. Basic support for sFlow: NMS300 can be configured as a receiver of flow samples from NTGR Managed switches which support sFlow. The below list provides the specific device models which are now supported...

GS716Tv3/GS724Tv4/GS748Tv5 Firmware Version 6.3.1.33 - NETGEAR Support

New Features and Enhancements: For compliance with California state law, the default “password” must be changed after logging into the switch. To configure SNMPv3, Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. If you upgrade firmware to V6.3.1.33 from an older version, clear your temporary internet files or browser cache to see the new settings. Added a new option under “Security > Management Security > SCC Control” ...

GS716Tv2 with EAV features | NETGEAR Communities

Hi,I'm having a terrible time debugging numerous problems with the switch and its AVB features provided by the EAV license.First, and foremost, after running...

GS716Tv2 802.1Q VLAN setup | NETGEAR Communities

I have a new GS716Tv2 switch. 5.4.1.10 firmware. B5.1.1.1 boot version. I'm trying to set up some 802.1Q VLANs. I'm looking at figure 4.7 on page 4-10 in the...

Netgear GS324TP switch has connection issues while Netgear GS716Tv2 has not with same devices | NETGEAR Communities

Hi Netgear Community,Last year I bought a Netgear GS324TP switch (serial number: 5LFxxxxxxxxx, firmware version: GS324Tx-v1.0.0.38) to replace my Netgear...

gs716t v2 in loader mode | NETGEAR Communities

My gs716t v2 switch is in loader mode, ive tried many things reboot restart button for 30 seconds nothing.only the power led burns yellow.i used smartwizzard...

Multicast VLAN setup on GS716T v2 | NETGEAR Communities

I would like to setup a GS716T v2 so that port 1 is the internet source from the router. Port 2 goes to a Computer, Port 3 has an IPTV feed (Multicast UDP)...

How to upgrade firmware on my old GS716T v2 | NETGEAR Communities

I am trying to upgrade the firmware on my GS716T v2 Switch. I cannot discover the switch using SmartControl Center. I can discover it with SmartWizard...

GS716Tv2 no connection | NETGEAR Communities

I tried to upgrade my Network with my old GS716Tv2.If i plug in any ethernet port it wont show me any light on, just the power led is light in orange.If...

GS716Tv2 Letter of Volatility | NETGEAR Communities

Can someone please provide a current Letter of Volatility for the Netgear Prosafe 16 Port Smart Switch? Model: GS716Tv2 Thank you for your help.

GS716Tv2 suddenly Link Down | NETGEAR Communities

I have a GS716Tv2 which after a few hours shutsdowns some links. The link won't work anymore even after a powercycle the link stays down. Only after loading...

Where can I get the private MIBs for GS716Tv2? | NETGEAR Communities

Looking for the private MIBs for this switch. There's another thread here about it but a moderator sent them via PM.I walked the Netgear tree and get back...

Need private MIBs for GS716Tv2 | NETGEAR Communities

Hello, I do need the private mibs for the GS716Tv2 switch. I found an article mentioning that it would be available through the support site but I can't...

NMS300 1.5.0.19 does not display complete Interface List for GS716Tv2 | NETGEAR Communities

I just installed NMS300 1.5.0.19 to monitor and manage my home network which includes GS108Tv2 (3), GS716Tv2 (1), XS708T (1), WN203 (3) and RN626X. NMS300...

GS716Tv2 switch. PCs connected via it do not get DHCP IP assigned | NETGEAR Communities

Hello, I have recently upgrade/rewire  my whole networking in the office  to CAT-6.it was a long way comming as the whole wiring was  way too...

GS716t V2 firmware update doesn't download to switch | NETGEAR Communities

 Hi,it has been a few years since I visited this site. I am trying to update my 716v2 to version 19 of the firmware, currently running version...

GS716Tv2 needs rebooting regularly | NETGEAR Communities

My GS716Tv2 runs fine, until it doesn't. About once per month, internal networking speeds slow to a crawl, and I reboot the GS716T and everything is fine...

Purchase date incorrect on purchased product - How to get it corrected?_case # 25763594 | NETGEAR Communities

How can I get information on a registered product corrected?I bought 3-GS716Tv2 switches from same vendor on the same day but somehow, one of them is showing...

IGMP snooping not working for 224.0.0.x range | NETGEAR Communities

On my GS716Tv2 I've noticed that all IGMP "Join Multicast Group" for addresses in the 224.0.0.x range are not appearing in the Multicast IGMP Snooping Table,...

Office Network Switch - Individual | NETGEAR Communities

Current Switches:  Count:2 of GS716Tv2 We want to put managed printers in 5 offices.  That is the printer consumables is managed from the web...

How do I constrain multicast traffic to specific ports on GS716Tv3? | NETGEAR Communities

I can't find specific instructions to constrain multicast traffic on the GS715Tv3 smart switch. I need to force all multicast traffic to travel over a...

Betreff: Netgear GS716Tv3 delete VLAN 2 and 3 | NETGEAR Communities

In principle, this is also not allowed in the current Firmware of the GS308T, but you may export the settings into a text file and modify it and update the...