Search results for: GS108Tv3

GS108Tv3 / GS110TPv3 Firmware Version 7.0.0.16 - NETGEAR Support

New Features and Enhancements: Initial Release Known Issues: Netgear account Single Sign On would be redirected to local login page if internet connection is not stable, suggest changing device password to avoid unauthorized login with default password Uploading configuration file through Smart Control Center cannot be turned off, suggest changing device default password to avoid unintended configuration settings being uploaded. Download Link: http://www.downloads.netgear.com/files/GDC/GS108Tv3/...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.20 - NETGEAR Support

Bug Fixes: Fixes the issue where the device UI might become inaccessible when the IP address is changed. Fixes the issue where you cannot configure IPv6 addresses in the range of unique local addresses (fc00::/7). Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before you update a firmware version that’s earlier than version 7.0.8.4 to vers...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.1.25 - NETGEAR Support

IMPORTANT CHANGES NOTE: This new firmware release will require product registration to unlock full access to the local management GUI. To learn the access restriction, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174 New Features and Enhancements: Device auto reclaim support from Insight app and cloud portal Bug Fixes: IGMP snooping is enabled automatically after a reset, regardless of its current setting. Download Link: http://www.downloads.netgear.com/files/GDC/GS10...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.6.3 - NETGEAR Support

Bug Fixes: Fixes the RADIUS reauthentication configuration where it did not clear after session timeout. Fixes an issue where the packet counter for the CPU port on the Statistics page did not work. Fixes an issue where a client device can fail to get a DHCP IP address when there is another network device connected between the switch and the client device. Fixes an issue that GS110TPv3 SFP LED status in Device View is incorrect. Security Fixes: Fixes various security vulnerability fixes and enha...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.5 - NETGEAR Support

New Features: This firmware provides the following new features for GS108Tv3 and GS110TPv3: Add Secure Diagnostic Mode (SDM) to allow NETGEAR Support to establish a secured connection for remote troubleshooting. This is disabled by default. Add Secure Shell (SSH) server for remote login. This is enabled by default. Lite command-line interface (CLI). To find the Lite CLI Reference Manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentatio...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.7.2 - NETGEAR Support

Security Fixes: Various security vulnerability fixes and enhancements. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 7.0.1.XX: Because HTTPS has been disabled by default since v7.0.6.2, the device UI Home page does not display automatically after using HTTPS to update to this firmware version. Open a new web browser tab and type the switch’s IP address to access the Home page. Default community string “Private” and “Public” for SNMPv1/v2 are not avai...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.19 - NETGEAR Support

Enhancements: Change the time stamp of syslog to follow ISO 8601 format. Upgrade OpenSSL to version 3.1. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes an issue that the system may freeze when accessing device migrates frequently from port to port. For example, wireless client roaming from one wireless AP to another AP that are connected to different ports on the...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.9 - NETGEAR Support

Enhancements: Upgrade OpenSSL to version 1.1.20 Add TLS 1.2/1.3 support Support SSH access control session . Bug Fixes: Power Timer Schedule does not work for certain time zones Switch does not send SNMP linkUp or linkDown traps Client cannot receive an IP address when using an 802.1Q trunk (GARP) VLAN assigned through a RADIUS server SNMP traps show community string with double quotes SSH incorrectly starts again after a reboot regardless of the previous setting Security Fixes: Addresses securi...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.5.2 - NETGEAR Support

New Features and Enhancements: Added ping and traceroute network administrative functions to the Troubleshooting page in the Insight Web Portal and app. Security Fixes: Fixes security vulnerabilities. This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Bug Fixes: Fixes the issue where the DNS host configuration doesn’t accept an IPv6 address. Fixes the issue where the PoE schedule for weekly recurren...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.22 - NETGEAR Support

Bug Fixes: Fixes the issue where the SSL certificate fails to upload to the switch for the HTTPS session Fixes the issue where the LLDP packet that contains PoE information (For example, IEEE 802.3 power through MDI TLV) is incorrectly sent from non-PSE ports Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before you update a firmware versi...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.8.4 - NETGEAR Support

Bug Fixes: Unable to update SSL certificate via TFTP and HTTPS if logged in via HTTPS. Security Fixes: Fixes security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security/. Warnings: Read and follow these warnings before updating a firmware version that’s prior to 7.0.8.4: We recommend against downgrading the firmware image to 7.0.7.X or earlier version after updating to 7.0.8.4 or later versions. Because HTTPS has been disabled by de...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.17 - NETGEAR Support

Enhancements: Updated help text to correct the explanation of the wildcard mask meaning under IPv4 ACL rule. A wildcard mask of 255.255.255.255 now indicates that none of bits are important. A wildcard of 0.0.0.0 indicates that all the bits are important. When changing to Insight mode for the first time, device IP and VLAN settings are kept, no longer reset to default values. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, vi...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.3.3 - NETGEAR Support

IMPORTANT CHANGES NOTE: This new firmware release requires product registration to unlock full access to the local browser UI. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. New Features and Enhancements: Faster application of multiple port configuration settings through the Insight Cloud Portal and the Insight app. Bug Fixes: Port now sends properly formed IGMP queries after booting up with non-default VLAN (VLAN 1). Switch connectivity is no...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.4.4 - NETGEAR Support

IMPORTANT CHANGES Firmware version 7.0.4.4 requires product registration to unlock full access to the local browser UI. A limited feature set is available without registration. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. New Features and Enhancements: Increase the resolution for the Storm Control > Threshold setting from 10Mbit to 1Mbit to support finer-grained values (for example, you can set 5.1). Bug Fixes: Added support for Insight PoE ...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.4.6 - NETGEAR Support

New Features and Enhancements: You can login and access all features through the local browser UI 3 times without registering the switch through your netgear.com account. A limited feature set is available without registration. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. Bug Fixes: PoE scheduler in the local browser UI fails to schedule across midnight Syslog service can fails when logging severity is set to ‘debug’ When setting recurring E...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.1.1.17 - NETGEAR Support

Release Date: June 1, 2026 Bug Fixes: Fixes the issue where static MAC address entries set for port security disappear or display on the wrong port, allowing unauthorized devices to connect or blocking legitimate ones. Fixes the issue where port speed and duplex settings do not apply correctly when using the Japanese device UI. This causes the port to remain at “Auto duplex”, even after you save a specific setting. Fixes the issue where uploading an SSL certificate fails due to inconsistent beha...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.1.1.12 - NETGEAR Support

New Features and Enhancements: Support for the UI dark theme Bug Fixes: Fixed an issue where the “Auto Edge” setting under CTS port configuration was unexpectedly changed to “Enabled” after a reboot. Fixed an issue that prevented changing the Management VLAN, resulting in a popup error message. Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warning...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.9.12 - NETGEAR Support

Enhancements: Upgrades Insight Agent to version 6.9.0.60900034 Security Fixes: This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security. Warnings: Read and follow these warnings before you update a firmware version that’s earlier than version 7.0.8.4 to version 7.0.8.4 or a later version: After you update the version to 7.0.8.4 or a later version, we recommend that you do not downgrade to version to 7.0.7....

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.4.8 - NETGEAR Support

New Features and Enhancements: Starting from firmware version 7.0.4.4, product registration is required to unlock full access to the local browser UI. You can login and access all features through the local browser UI 3 times without registering the switch through your netgear.com account. A limited feature set is available without registration. For more information, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174. Introduced an option to enable/disable switch discov...

GS108Tv3 / GS110TPv3 / GS110TPP Firmware Version 7.0.1.20 - NETGEAR Support

IMPORTANT CHANGES NOTE: This new firmware release will require product registration to unlock full access to the local management GUI. To learn the access restriction, visit the NETGEAR knowledge base article at https://kb.netgear.com/000061174 New Features and Enhancements: Updated GS108Tv3 and GS110TPv3 to support features that are part of 5.6 release for Insight Manager. Added MAC Address Bypass (MAB) feature for GS108Tv3 and GS110TPv3 Device will reset to Insight default configuration after ...

How To Hard Reset a GS108Tv3 Switch | NETGEAR Communities

I have a GS108T v3 switch that doesn't configure itself at 192.168.0.239 when it's connected directly to a MacBook, nor do I see any DHCP requests coming...

GS108Tv3 Trap v3 Configuration | NETGEAR Communities

Hello i have a  GS108Tv3 8-Port Gigabit Smart Managed Pro Switch device and i' need to configure trap v3, from the web ui interface i only see...

Two GS108Tv3 Connected Together | NETGEAR Communities

Hello all,I have connected two GS108Tv3 switches together on port 8. I am passing all vlans across these ports. Initially they connect at 1G but over time...

Setting MTU on GS108Tv3 | NETGEAR Communities

Hello all,I would like to enable a large MTU going from my NAS to several devices, across 3 linked GS108Tv3 switches. It seems setting MTU on the switch is...

Insight App not seeing GS108Tv3 8-Port Gigabit Smart Managed Pro Switch | NETGEAR Communities

I have an Netgear Router (GS108Tv3 8-Port Gigabit Smart Managed Pro Switch) coming of an Eero Pro 6e. While I can manage the router through the webapp, the...

netgear gs108tv3 vlan and routing | NETGEAR Communities

HiWhat is possible for my desired outcomePort1 - VLAN1Port2 & 3 - VLAN10Port 4 & 5 - VLAN 20 I would likePorts in VLAN 10 to communicate among...

Re: GS108Tv3, disable SSDP broadcast on UDP port 1900 | NETGEAR Communities

Hello all, I have exactly the same issue with on Netgear switch M4300 series, running firmware version 12.0.17. On this firmware version, there is...

GS108Tv3 Activate Switch to a DHCP Server or reserved ip address on the ports | NETGEAR Communities

Hi All, Could anyone tell me if it is possible to either Activate the GS108Tv3 Switch to a DHCP Server or reserve ip address on any of the 8...

gs108t v3 - impossible to register - no limited access mode | NETGEAR Communities

I have just bought this secondhand. It makes me register and so I did. Netgear send me confirmation email to confirm this.However user and pass is not...

802.1Q / gs108t vs gs108tv3 | NETGEAR Communities

Hi there, I have a gs108t switch that broke and while waiting for the replacement I bought a gs108tv3.Unfortunately, I can't get it to work like the v1...

GS108Tv3 simple Vlan issues | NETGEAR Communities

I would like to set up two vlan on my switch.VLAN 2 "WAN" on port g1-3 in 192.168.1.0/24 (router is behind on 192.168.1.1)VLAN 10 "LAN" on port 4-8 in...

GS108Tv3 SNMP OIDS | NETGEAR Communities

Hi Guys,I'm trying to add my Netgear Switch in my Zabbix Monitoring Portal through SNMP so I can monitor the traffic on specifics ports but can't for the...

GS108Tv3 Firmware Update Failure from old "7.0.7.1" to new "7.0.9.11" and stuck with old firmware | NETGEAR Communities

GS108Tv3 did not take an update, so does anyone has the same problem? I already rebooted and tried the update repeatedly, but it seems it stuck with...

VLAN Routing GS108Tv3 | NETGEAR Communities

Hi,in order to implement a VLAN in my private network, Netgear Support has advised me to buy a GS108 Tv3 Switch (in addition to existing GS308e and GS305e)...

GS108Tv3 - Egress rate limiting option missing | NETGEAR Communities

I have a GS108Tv3. The user manual says there should be an option for "egress rate limiting" in the QoS settings but it's missing. The only option I can see...

GS108Tv3 8-Port Gigabit Smart Managed Pro Switch - dropdown in connectivity speed when using zoom | NETGEAR Communities

Hi I have a GS108Tv3 8-Port Gigabit Smart Managed Pro Switch When I use zoom the Switch drops down on connectivity speed form 1 GB to 100...

GS108Tv3 Enter Registration Key - Please remove this warning | NETGEAR Communities

Hello Netgear,we are business customer since over 14 years and have bought a number of large switches. Now we bought a small GS108Tv3 and see this...

Steps to change the management VLAN for the GS108Tv3 | NETGEAR Communities

Hi all,Would anybody be so kind as to provide the steps to change the management VLAN from 1 to 1001?The GS108Tv3 is connected to another switch that...

Power supply for GS108Tv3 | NETGEAR Communities

Hello all. Does anyone know of a compatible 230v input power supply for this switch?  I travel between Europe and the US for work.and have toasted...

ESX Virtual Switch Tagging and Netgear GS108TV3 Config | NETGEAR Communities

Hello all,I have an 8 port GS108Tv3 switch and I am trying to configure virtual switch tagging on my ESX server that is attached to this switch. The ESX...

Manage Your Network Easier with NETGEAR Smart Switch CLI

Simplify network management with NETGEAR Smart Switch CLI. Configure, monitor, and troubleshoot your switches all from one place.