Search results for: AX742

How do I configure a stacking port as an ethernet port on my managed switch? - NETGEAR Support

Follow these steps to set up the topology: Insert the AX742 into the I/O module on the switch. Configure the switch A and B as described in the following instructions. Connect the AX 742 with stack cable. Reboot Switch A and Switch B. For more information, see the following support articles: How do I configure a stacking port as an ethernet port using the web interface on my managed switch? This article applies to the following managed switches and their respective firmware: M5300 - firmware ver...

M5300 Firmware Version 11.0.0.28 - NETGEAR Support

M5300 Firmware Version 11.0.0.23 Release Notes Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G-PoE+(GSM7228PSv1h2) M5300-52G-PoE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 11.0.0.23 mDNS packets will be dropped when IGMP/MLD snooping is enabled. A lot of entries are missing in the Neighbor Table on IPv6 GUI. Switch sends radius accounting requests with default interface IP instead of u...

WAX220 Firmware Version 1.0.2.1 - NETGEAR Support

Initial release: This is the initial release for NETGEAR® Essentials WiFi 6 AX4200 Access Point WAX220. New Features: Wi-Fi 6 (802.11ax) capable Dual band: 2x2 2.4 GHz radio, 3x3 5 GHz radio Supports IEEE802.11ax/ac/a/b/g/n wireless standards with up to 574 Mbps data rate on the 2.4 GHz band and 3600 Mbps on the 5 GHz band Supports up to 160 MHz channel width on the 5 GHz band PoE+ (802.3at) powered 2.5 Gbps Ethernet port Support for MU-MIMO function on both the 2.4 GHz and 5 GHz radio 128 concu...

WAX220 Firmware Version 1.0.2.5 - NETGEAR Support

Initial release: This is the initial release for NETGEAR® Essentials WiFi 6 AX4200 Access Point WAX220. New Features: Wi-Fi 6 (802.11ax) capable Dual band: 2x2 2.4 GHz radio, 3x3 5 GHz radio Supports IEEE802.11ax/ac/a/b/g/n wireless standards with up to 574 Mbps data rate on the 2.4 GHz band and 3600 Mbps on the 5 GHz band Supports up to 160 MHz channel width on the 5 GHz band PoE+ (802.3at) powered 2.5 Gbps Ethernet port Support for MU-MIMO function on both the 2.4 GHz and 5 GHz radio 128 concu...

M5300 Firmware Version 10.0.0.25 - NETGEAR Support

Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) New Features: Support mixed-stacking with GSM7328Sv2h1,GSM7352Sv2h1,GSM7228PSv1h1,GSM7252PSv1h1. Support AX745(10GBASE-T RJ-45 Port Adapter). Bug Fixes: STP: The lag port cost is 0 after add ports to it. Failed to download image through IPv6 HTTPs . Failed to download configurat...

How do I stack switches using 10G fiber on my managed switch? - NETGEAR Support

The figure below shows how to stack two switches in different buildings at long distance using 10G fiber. First insert AX741 to I/O slot on Switch A, and insert AX741 to I/O slot on Switch B. Then connect the two AX741 with fiber. For more information, see the following support articles: How do I stack switches with 10G fiber using CLI commands on my managed switch? How do I stack switches with 10G fiber using the web interface on my managed switch? This article applies to the following managed ...

GSM7328S/GSM7352S/GSM7228PS/GSM7252PS Firmware version v10.0.0.25 - NETGEAR Support

Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Release 10.0.0.25 Firmware New Features from Release 10.0.0.25 Support mixed-stacking with M5300-28G(GSM7228Sv1h1),M5300-28G3(GSM7328Sv2h2),M5300-28GF3(GSM7328FSv2h1),M5300-28G-POE+(GSM7228PSv1h2),M5300-52G(GSM7228Sv1h1),M5300-52G3(GSM7252Sv2h2),M5300-52G-POE+(GSM7252PSv1h2). Support AX745(10GBASE-T RJ-45 Port Adapter). Note: The 10.0.0 doesn't support GSM7328FS v1h1,GSM7328Sv1 or GSM7352Sv1, so don't try to download. Upg...

GSM7328Sv2,GSM7352Sv2,GSM7228PSv1,GSM7252PSv1 Firmware version 10.0.0.53 - NETGEAR Support

Applicable Models: GSM7328Sv2h1,GSM7228PSv1h1, GSM7352Sv2h1, GSM7252PSv1h1 Bug Fixes from Release 10.0.0.44: Unable to enable routing on VLAN 1 from GUI SNTP synchronized time is truncated, when show sysinfo by CLI Stop offering IP address when there are many DHCP IP conflicts in DHCP pool Switch crashed when issue 'Show vlan private-vlan' All of ports became 'detach' after remove one rule in ACL M5300-28/52G-POE+ cannot provide power to PD with RPS5412 Switch keep printing Power Supply Alarm& A...

M5300 Firmware Version 10.0.0.53 - NETGEAR Support

Applicable Models: All M5300 series M5300-28G(GSM7228Sv1h1) M5300-52G(GSM7252Sv1h1) M5300-28G3(GSM7328Sv2h2) M5300-52G3(GSM7352Sv2h2) M5300-28G_POE+(GSM7228PSv1h2) M5300-52G-POE+(GSM7252PSv1h2) M5300-28GF3(GSM7328FSv2h1) Bug Fixes since 10.0.0.44: ,Unable to enable routing on VLAN 1 from GUI ,SNTP synchronized time is truncated, when show sysinfo by CLI ,Stop offering IP address when there are many DHCP IP conflicts in DHCP pool ,Switch crashed when issue 'Show vlan private-vlan' ,All of ports b...

August 2026 NETGEAR Security Advisory - NETGEAR Support

NETGEAR's Product Security Team has assessed the following product vulnerabilities and provided guidance to address these vulnerabilities in the table below. Because firmware updates contain security fixes, bug fixes, and new features for your products, we strongly advise you to enable automatic firmware updates on supported devices. For older products, we advise you to download and install new firmware updates as soon as possible or follow the guidance provided for devices that require other re...

July 2026 NETGEAR Security Advisory - NETGEAR Support

NETGEAR's Product Security Team has assessed the following product vulnerabilities and provided guidance to address these vulnerabilities in the table below. Because firmware updates contain security fixes, bug fixes, and new features for your products, we strongly advise you to enable automatic firmware updates on supported devices. For older products, we advise you to download and install new firmware updates as soon as possible or follow the guidance provided for devices that require other re...

June 2026 NETGEAR Security Advisory - NETGEAR Support

NETGEAR's Product Security Team has assessed the following product vulnerabilities and provided guidance to address these vulnerabilities in the table below. Because firmware updates contain security fixes, bug fixes, and new features for your products, we strongly advise you to enable automatic firmware updates on supported devices. For older products, we advise you to download and install new firmware updates as soon as possible or follow the guidance provided for devices that require other re...

Stacking ax742 | NETGEAR Communities

We will stack with gsm7328fs and gsm7328fsv2. We will install ax742 modules on the switches. Is there any problem while stacking?

Uplink configuration with AX742 module | NETGEAR Communities

Hi all,  can I configure with Netgear AX742 a uplink port also or is it only for stacking? I asking because we've two Netgear switches...

M5300 Stacking w/ AX742 kit | NETGEAR Communities

Forgive me if this is a question that is answered elsewhere, but I am attempting to stack a couple groups of 4-5 M5300 switches in my school...

Stacking GSM7352S with GSM7328S - Problem! | NETGEAR Communities

I have two switches as in the title, a pair of AX742 modules and a cable linking them. Both switches are running firmware 8.0.3.49. I believe them to be...

Stack Error with 2 GSM7328Sv1 | NETGEAR Communities

Hi there,in our company we have two GSM7328Sv1 Switches which we want to stack. We have four AX742 modules, two for each switch. When I try to put them in a...

Stacking problems with GSM7328Sv1 | NETGEAR Communities

I have 6 x GSM7328S v1 switches stacked using the AX742 stacking kits. Everything appears to working correctly, however, when pinging the stack management...

GSM7352S Stacking with DAC | NETGEAR Communities

I currently have 2x GSM7352Sv2 switches stacked using AX742, I would like to add a 3rd switch a GSM7352Sv1, but due distance it would need to be stacked...

M5300-28G3 MLAG / stacking concepts | NETGEAR Communities

Hi, I'm attempting to stack / use MLAG with two M5300-28G3 switches (both same version 11 firmware). I have two AX742 stacking modules on each switch...

Setup a stack between distant switches | NETGEAR Communities

Hello,I currently have three switches GSM7352S stacked together with AX742 kits.I need to set up two more switches (same model) in another room.I would like...

AX743 SFP 10Gbe Module and GSM 7328FS | NETGEAR Communities

Hi all, new to this forum and hoping experts here can advise me:Hi all; I have a new setup of Netgear Core switches consisting of 2 x GSM7328S and 2 x...

Orbi AX4200 NBR750 HELP! | NETGEAR Communities

Device is reachable via networkcable and e already reseted it.The two Channels (2.4/ 5 GHz) are on and also the Guestaccount.It runs on an SIM-Card with...

NBK752 (AX4200) not failing over to 5G | NETGEAR Communities

Hi folks Got the above set up as broadband (Ethernet) set as the primary with mobile 5G as the backup in the event of primary internet failing. The...

Dual WAN or Failover Setup on NETGEAR Orbi AX4200 (RBK752) with Fiber and 4G Connections | NETGEAR Communities

Hello everyone,I am currently using a NETGEAR AX5400 Orbi (RBK762S) and I have a unique connectivity scenario that I need assistance with. I...

Verizon Wireless with Orbi AX4200 5G WiFi 6 Router (NBR750) disconnects from Verizon network | NETGEAR Communities

My Orbi AX4200 5G WiFi 6 Router (NBR750) with Verizon Wireless disconnects from Verizon network. The SIM was setup as a BYOD but seems to still have a...

AX4200 satellite adding to AC2200 | NETGEAR Communities

We purchased the Orbi Mini 2-pack AC2200 Tri-Band WiFi system initially.  Later I also purchased  an Orbi Tri-band WiFi6 add-on satellite. ...

Nighthawk X6 AC3200 Tri-Band WiFi Router to NETGEAR - Orbi AX4200 Tri-Band Mesh Wi-Fi 6 System (2-pa | NETGEAR Communities

We currently have a Netgear Nighthawk X6 AC3200 WiFi Rou Model R8000 (old 7 or 8 years), we are having a lot of trouble with phone coverage inside our house....

NETGEAR - Orbi RBK753S AX4200 WiFi 6 Mesh System- wifi issue | NETGEAR Communities

Thnak you in advance for the help. I upgraded my internet plan to gigabit form Xfinity. I currenlty live in Houstin Tx. The service provides 1.2 gigabits...

For AX4200 Do I still meed ISP router | NETGEAR Communities

I have verizon FIOS internet only service. No TV.I just got the Orbi 4200 from costco. It have a router and 2 setelite.  I was looking at or watching...

Upgrade from AC3000 to AX4200 or AX6000? | NETGEAR Communities

Hi- I am looking for input on if it’s worth upgrading our current AC3000 system to either of the newer AX platforms.Few Facts:1 RBR50 and 2 RBS...

Orbi Upgrade from RBK50 to RBK752/AX4200 | NETGEAR Communities

I've been enjoying my Orbi RBK50 for over 3 years now and ready to upgrade to Orbi RBK752/AX4200. I'm looking for some tips to make the swap painless. Do I...

WAX220PA | WiFi 6 AX4200 Dual-band Multi-Gig PoE Access Point with Power Adapter | NETGEAR Support

WAX220PA - WiFi 6 AX4200 Dual-band Multi-Gig PoE Access Point with Power Adapter

NBR750-1BNCNS | NBR750 — Orbi AX4200 5G WiFi 6 Router for Bell Mobility | NETGEAR Support

NBR750-1BNCNS - NBR750 — Orbi AX4200 5G WiFi 6 Router for Bell Mobility

RBR750 | Orbi WiFi 6 Router AX4200 | NETGEAR Support

RBR750 - Orbi WiFi 6 Router AX4200

RBS750 | Orbi WiFi 6 Add-on Satellite AX4200 | NETGEAR Support

RBS750 - Orbi WiFi 6 Add-on Satellite AX4200

Experience High Performance with NETGEAR's WiFi 6

Experience the future of connectivity with NETGEAR's high-performance WiFi 6, offering faster speeds, increased capacity, and improved efficiency.