![\"\"](\"https:\/\/www.netgear.com\/hub\/wp-content\/uploads\/2025\/11\/Risk-in-AVoIP-networks-696x392-1.jpg\")
<\/p>\n <\/p>\n
IN THIS ARTICLE<\/strong><\/p>\n In AV over IP networks, transceivers often run continuously at 90\u2013100% of their capacity. Think of 24\/7 video streams, live camera feeds, or multichannel audio. This constant load results in:<\/p>\n A rule of thumb in electronics: every 10\u00b0C temperature increase halves the lifespan of components. At 85\u00b0C, the failure rate is up to five times higher than at 40\u00b0C [1].<\/p>\n <\/div>\n In AV environments, downtime is rare. While an IT network might be idle at night, an AV backbone in a hospital or theater runs day and night. This means:<\/p>\n Modules operating under full load wear out faster than identical modules in less demanding environments.<\/p>\n <\/div>\n AV over IP networks often push modules to their maximum capacity. For example:<\/p>\n In such scenarios, the link budget is tight. Even slight degradation in laser power can immediately lead to:<\/p>\n At higher speeds, tolerances are smaller\u2014what works at 1 Gbps can be catastrophic at 25 or 100 Gbps.<\/p>\n <\/div>\n AV installations are often located in challenging environments:<\/p>\n Unlike data centers with air conditioning and dust filters, AV locations are often thermally and physically harsher for modules. This increases the risk of:<\/p>\n In such situations, industrial-grade modules with higher temperature tolerance are recommended.<\/p>\n <\/div>\n AV over IP networks present unique challenges for fiber-optic modules. The combination of high load, continuous operation, maximum data rates, and less-than-ideal environments increases the risk of accelerated wear. This doesn\u2019t mean modules are unsuitable\u2014but they do require more attention and monitoring.<\/p>\n In the next blog, we\u2019ll explore how maintenance and monitoring can extend the lifespan of your modules and prevent failures.<\/p>\n <\/div>\n \n\n
\n 1. High Constant Load = Higher Operating Temperature<\/h2>\n
\n
\n 2. Continuous Operation at Maximum Power<\/h2>\n
\n
\n 3. Higher Data Rates = Smaller Error Margin<\/h2>\n
\n
\n
\n 4. Less Than Ideal Environmental Conditions<\/h2>\n
\n
\n
\n Conclusion<\/h2>\n
\n More information<\/h2>\n
\nMore information about our AV Solutions<\/p>\n
![\"NETGEAR](\"https:\/\/hubspot-no-cache-na2-prod.s3.amazonaws.com\/cta\/default\/242128791\/interactive-244081143526.png\")
![\"NETGEAR](\"https:\/\/hubspot-no-cache-na2-prod.s3.amazonaws.com\/cta\/default\/242128791\/interactive-243392354033.png\")
![\"CONTACT](\"https:\/\/hubspot-no-cache-na2-prod.s3.amazonaws.com\/cta\/default\/242128791\/interactive-243744855768.png\")