PROSAFE® 24-PORT GIGABIT SMART SWITCHES WITH STATIC ROUTING
GS724TR
Support 32 Static Routes to enable inter VLAN routing and manage bandwidth more effectively by managing broadcast storms, as well as tighter security.

Comes with a complete suite of advanced features for more robust security, higher quality of service and high availability.
Network Protocol and Standards Compatibility:
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x full-duplex flow control
Interfaces
- GS724TR: 24 10/100/1000 Mbps switching ports
- GS748TR: 48 10/100/1000 Mbps switching ports
- 2 or 4 built-in shared SFP Gigabit Ethernet fiber ports for 100/1000 Mbps connectivity
- Auto-sensing and auto-negotiating capabilities for all copper ports
- Auto Uplink™ on all ports to make the right connection
Administrative Switch Management
- 32 static routes
- ICMP Router Discovery Protocol (IRDP)
- IEEE 8021.Q VLAN (255 groups, Static)
- IEEE 802.1p Class of Service (CoS)
- DSCP
- IEEE 802.3ad static or dynamic link aggregation (LACP)
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1w Rapid Spanning Tree Protocol
- IEEE 802.1S Multiple Spanning Tree Protocol
- BPDU flooding
- IGMP snooping v1/v2
- SNMP v1, v2c, v3
- RFC 1213 MIB II
- RFC 1643 Ethernet Interface MIB
- RFC 1493 Bridge MIB
- RFC 2131 DHCP client
- RFC 2737 Entity MIB
- RFC 2674 – P-Bridge MIB
- RFC 2674 – Q-Bridge MIB
- RMON group 1, 2, 3, 9
- Private Enterprise MIB
- IEEE 802.1x (RADIUS)
- Access control list (ACL)
- Layer 3- and 4-based Quality of Service (QoS)
- TACACS+
- RADIUS accounting
- Port-based security by locked MAC addresses
- Storm control for broadcast, multicast and unknown unicast packets
- Port-based ingress/egress rate limiting SNTP
- IEEE 802.1ab LLDP
- LLDP-MED
- GARP
- Voice VLAN
- Protected ports
- Port mirroring support
- Web-based configuration
- HTTP and HTTPS
- Configuration backup/restore
- Password access control
- DHCP filter
- DHCP relay
- Denial-of-service (DoS) prevention
- Dual Image
- Firmware upgradeable
- Syslog
- Ping & traceroute
Performance Specifications
- Forwarding modes: Store-and-forward
- Bandwidth
GS724TR: 48 Gbps
GS748TR: 96 Gbps
- Network latency: Less than 5 microseconds for 64-byte frames in store-and-forward mode for 1000 Mbps to 1000 Mbps transmission
- Buffer memory: 750 KB
- Address database size: 8,000 media access control (MAC) addresses per system
- Addressing: 48-bit MAC address
- Mean time between failure (MTBF):
GS724TR: 265,404 hours (~30 years)
GS748TR: 196908 hours (~22 years)
Leds
- Unit: power, fan
- Per port: link, speed, activity
Power Supply
- Power Consumption:
- GS724TR: 36.8W
- GS748TR: 71.2W
- 100-240V AC/50-60 Hz universal input
Physical Specifications
- Dimensions (h x w x d):
- GS724TR: 43 x 440 x 205 mm (1.69 x 17.32 x 8.08 in)
- GS748TR: 43 x 440 x 257 mm (1.69 x 17.32 x 10.13 in)
- Weight:
- GS724TR: 3.10 kg (6.83 lb)
- GS748TR: 4.22 kg (9.30 lb)
Environmental Specifications
- Operating temperature: 32° to 131° F (0° to 55° C)
- Storage temperature: -4° to 158° F (-20° to 70° C)
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage humidity: 95% maximum relative humidity, non-condensing
- Operating altitude: 10,000 ft (3,000 m) maximum
- Storage altitude: 10,000 ft (3,000 m) maximum
Electromagnetic Compliance
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- EN 55022 (CISPR 22)
- EN 55024 (CISPR 24)
- C-Tick
Safety
- PCE mark, commercial
- CUL 60950 (Listed)/ EN 60950 (Low Voltage Directive)
Warranty
- NETGEAR Lifetime Warranty
Modules
- AGM731F ProSafe 1000BASE-SX SFP GBIC: Module with LC connectors for 50um or 62.5um multi-mode fiber cable
- AGM732F ProSafe 1000BASE-LX SFP GBIC: Module with LC connectors for 9um single-mode fiber cable
- AGM733 ProSafe 1000BASE-LZ SFP GBIC: Module with LC connectors for 9um single-mode fiber cable
Package Contents
- ProSafe 24- or 48-port Gigabit Smart Stackable Switch with 2 or 4 shared SFP Ports (GS724TR or GS748TR)
- Rubber footpads
- Power cord
- Rack-mount kit
- Resource CD Installation Guide
- Warranty/support information card
Ordering Information
GS724TR
- North America: GS724TR-100NAS
- Europe: GS724TR-100EUS
- Australia: GS724TR-100AUS
- Japan: GS724TR-100JPS
GS748TR
- North America: GS748TR-100NAS
- Europe: GS748TR-100EUS
- Australia: GS748TR-100AUS
- Japan: GS748TR-100JPS
ProSupport® Information
GS724TR
OnCall 24x7, Category 1
- PMB0331-100 (U.S. only)
- PMB0331
XPressHW, Category 1
GS748TR
OnCall 24x7, Category 2
XPressHW, Category 2